Range of Material documents

Hi,
We need to reload all the inventory data to BW because of some double loading in BW.
We may not able to use posting date for reloading, but might left with one choice by document numbers in OLI1BW. Since OLI1BW only allows by range for mat docs (not multiple) , how can we check for possible range.
Also we need to check for any overlay, break in ranges, etc., to avoid double loading of certain records
Regards
Dyuthi

Thank you Dinesh for the reply....
But I just need to analyze the possible range of material doc numbers used in OLI1BW.
How can I find out the possible range of material document in OLI1BW?
Regards,
dyuthi
Edited by: Dyuthi mc on Jun 16, 2009 11:11 AM

Similar Messages

OMX4 - FBN1 - Number range for Material document and FI document

47 - is for FI document number range in Material ledger FBN1. OMX4 gives number range for Material document. My question is how big the number range must be? Since thousands of Materials involved, I couldn't imagin this?
Anybody knows, how to determine the size of no. ranges in Material Ledger configuration? SAP simply says, check no. ranges whether it meets the requirement....
I don't expect an answer again, just check your business, how many transactions would be in a period, which is not quantifiable now?
I would like to understand this from somebody's experience of using insufficient or excessive no. ranges, especially in this area.
Cheers,
Ashok

What is the number range you are using? Year Dependent or Independent?
When you don't know the document number consumption pattern you should use Year dependent number range in both OMX4 & FBN1. Observing this for a month will give a rough Idea and observing for a Quarter will give you a fair Idea and the result for a year gives almost near to accurate consumption of number ranges.
The generation of documents is dependent on the number of materials and Profit centers involved. As much as possibe use Summarization at profit center level when posting to FI. This will reduce the number of documents and line items that are getting generated.

How to find Delivery numbers for a range of Material Documents

Hi,
Could anybody please let me know how to find the delivery numbers from a range of material documents based on a given delivery date.
Regards
Kasi

Hi,
there is an index table for deliveries by material:
VLPMA
Select the delivery numers using the material range from VLPMA.
Regards,
Clemens

Number range for material documents

Hi SAP Gurus,
Can anyone please advise if we can reset number range for material documents once it reached to last number for existing number range ?
Thanks & Regards,
Manoj

Hi,
If material numbering reached to last number for existing number range, you can create Number Range Text Group and assign to your material type in following path
IMG -> Logistic ->General -> Material Master ->Basic Settings ->Material Type ->Define Number Range for each Material Type
OR
T.code:MMNR
Lets example you have now:
Number Range Text Group:01
From Number:     1
To Number     :19999999
Now you can create Now One Number Range Text Group
Number Range Text Group:02
From Number:20000000
To Number     :29999999
Now assign Number Range Text Group to your material type in MMNR , {{by clicking group in menu, select maintaion->group->insert
Number Range Text Group:02
From Number:20000000
To Number     :29999999
and save}}.
Regards,
Biju K

Number range of material document

hello guys...
can anybody say that where we have to assingn the number range of material documents
regards
vamshi

Thanx Rambhupal Reddy
but still i am getting this error after pressing the green flag in VF02 , that
" For object RF_BELEG VAMC,number range internal 01 does not exist FBN1"
After clicking the error...i am getting
Diagnosis
The database table NRIV has the delivery class 'c' i.e., the SAPdefault settings are only in client 000.
Procedure
Create the missing number range interval in customizing.
Transation code:FBN1
regards
vamshi

How to setup number range for Material Documents created by goods movement

Hi Experts,
Good day!
Would you know what table or transaction code we could setup or configure the number range for Material Documents number created by goods movement?
Thanks. Have a wonderful day!
Rockz

Hi,
Tcode - OMBT
Regards,
Vivek

Change Number Range of Material Document

Hi Guru,
We have a requirement to change material document number range that depend on movement type.
I have check in SPRO and read some document for material document number range.
I understand that this is a standard SAP.
- GR from PO or Order         Number Rage will be 5000000000 to 5099999999 and Fiscal Year
- GR Other, GI, Transfer      Number Rage will be 4900000000 to 4900000000 and Fiscal Year
My question is Can we change this number range?
I guess that we have to implement BADI or User-Exit to determine new number rage but I don't know how to do this.
Please kindly advice or guide me.
Thank you very much.
Saiyaman

Hi,
Insted of Movemen ttype you can asign seperate number range to a transaction code follow the process as below
   First u need to create seperate document type in OMR4 or OBF4,   then create a new number range in OMBT assign your new number range to new created document type then in T. code OMBA assign new created document type to the transaction code so whenever u will create document with this Transaction code u can get new number range.
regards,
zafar

Number ranges for material document (migo) and inventory documents

Hi Gurus,
We need a different number ranges for goods receipt documents and inventory documents because we have different company merged in to one box.Can any body tell me on what basis we differenciate the number ranges how to configure it.
If we take PO, we have different doc types and we assign number ranges to those documents. in case of Miro , it is the single transaction code used by different companies and how to give different number ranges.
Regards,
Sri........

Hi,
I think number ranges of inventory documents are on client level not on company code wise . because even though your creating new document and assigned different number ranges for the documents but these while assigning ranges to T codes (MIGO or MIRO) you dont have option like company codes ( tcode OMBA) so number ranges for inventory documents are at client level not at company code level.

Material Document range number.

Hi everybody, How can i do to create a different range of material document numbers, for differents storage locations? Regards.

It is not possible to have a different sequence for material documents at storage location level.
There is a practical difficulty also:
One material document can have multiple storage locations (both receiving and sending). What number range should be used in such cases?
Lakshman

Material Document No ranges

Hi all,
Can Material Document No ranges be changed for every fiscal year ?
say i want to discontinue the existing no range series and start the document range with a new series for the new fiscal year .
is this possible ?
i tried doing this but the system is not picking the new inverval for the year .
what could be the probable reasons
thanks

Hi,
We have to maintain Number range for Material Document with the start of New Fiscal year, with Fiscal Year as Primary Key.
We need to maintain Number ranges for New fiscal year.
regards,
Prashant Rathore.

Material Document Number range for 2011

Hi,
As per standard practice we need to reset the number range for material document for calendar year 2011. New Number range will be effective from 01.01.2011. Please let me know the below -
1.     Step by step process for Number range assignment for Material document (GR / GR / Transfer posting) for 2011
2.     Can we define Material document number rage financial year wise (Apr to Mar) like other FI documents number range? This issue is raised by finance dept. IF yes what will be the process?
At present Number range assignment for our company is showing Year as 9999, from number 5000000000 and to number 5000000000
Whether it is mendatory to re-ser number range.
Thanks,
Ranjan Kumar
Edited by: Ranjan.pearl on Dec 29, 2010 2:51 PM

Number ranges for Material document are maintained in OMBT.
But there is no need to maintain different number ranges for material document as same as financail document. Financial documents are year based whereas material documents are not.
Also if you are maintaining the material document number ranges as per year specific, then also same document number cant be used. But in case of financial document, the document number can be same i.e year specific.
Different number ranges for Material Document :-
Then assign the specific interval for a specific year like
Year      From Number           To Number
2001      0100000000     0199999999
2002      4900000000     4999999999
2003      5000000000     5999999999
2004      0200000000     0299999999
Still any queries, revert back.

Error in material document posting

I am getting an error while posting goods receipt.
Number range for trans. / event type WA in year 2007
does not exist.
I have defined the number ranges for accounting
documents, for material and physical inventory
documents and for reservations in inventory management
and physical inventory documents. The group WA is
attached to the group material documents for goods
movement types and inventory differences.
I have also used transaction OBH2 to copy the number
ranges to the fiscal year 2007.
Why am I still getting this error? Are there some
settings I have not made?
Please help me.
Thanks,
Ranganath Charyulu

Hello Ranganath,
Go to t-code OMBT
- Click on Change Groups (F5)
- select the check box wich includes WA (the Number Range Object Material document Grouping)
- Click on Change (Pen)
- Go to Edit -> Insert year
- Give 2007 and give the new number ranges.
Hope this will help.
Regards
Arif Mansuri

Material document not updated in inspection lot QALS table

HI
The inspection lot created for 04 inspection type during Goods Receipt.
The material document is appearing in the inspection lot but found not updated in table entries. i.e.., QALS -MBLNR
When i checked other inspection lots it was found updated. How this happened ?
Any Snote to be applied?
Thanks

Hi,
Check the number ranges for material documents. (with year) for document type WE in OMBT transaction code.
If same material document number repeats in the same calendar year,then document update will be terminated.
As, document no. will be already existing in tables, system won't allow to update the same no. again.
Thanks & Regards,
Anand.

Material document not updated in Table MSEG,MKPF

Hi,
when i post the GR, Materail doument is posted and matereail doument number is shown, but when i go to Display mode of the materail docuemnt number. the message is coming" document numberXXXXX does not exist in calender year 2010" Message no: M7062.
if i see the tables MKPF,MSEG,EKBE there is no entry dispalyed..
due to this problem my work is pending in all Procure to pay scenario..
can you provide the solution..
regards,
Obulesu

Hi,
Check the number ranges for material documents. (with year) for document type WE in OMBT transaction code.
If same material document number repeats in the same calendar year,then document update will be terminated.
As, document no. will be already existing in tables, system won't allow to update the same no. again.
Thanks & Regards,
Anand.

User exit for different Material Document for different company code

Hi,
We want to have different no. range for Material document (GR) for different compnay code. Presently we have no. range at client level. Can we do with any userexit. If so pls. give the details.
Regards
Sai Krishna

[user exit for generating external serial;
[BADI MB_DOCUMENT_BADI;
[user exit or any other enhancements during good receipt;

Range of Material documents

Similar Messages

Maybe you are looking for