Rapid Install on Linux 7.1 and 7.2

Hi,
I have had the same problem on Linux 7.1 and 7.2. When I run
rapidwiz using the 11i CD's, I get... "Preparing to start up
Rapid Install...<new line> If you are performing a CD install,
you must change directories in your UNIX session to a directory
outside of the CD-ROM mount point before you will be able to
eject the CD and proceed. <new
line> /tmp/RapidInstall/bin/runWizard.sh: line 115: 3462
Segmentation fault $CMDDIR/jre/$PLATFORM/1.1.8/bin/jre -
classpath $CLASSPATH RIWizard"
...and I have to hit enter to get my cursor back. All I
really want to do is successfully install 8i database. Any help
on this matter is appreciated.
Thanks, Victor

First of all, please refer to our platform support page at
http://www.weblogic.com/platforms/index.html
and make sure that you are on a supported configuration (OS version,
WebLogic Server with Service Pack Version, JDK version).
For installation instructions, please refer:
http://www.weblogic.com/docs51/install/index.html
Best Regards,
Narayan Anand
Developer Relations Engineer
BEA Systems, Inc.
"WOoYing" <[email protected]> wrote in message
news:[email protected]..
Please forgive me but I am far from being a linux guru. I have
Weblogic 510 SP6 here and I need to install it onto a Linux 7.2 box.
I would appreciate if anyone can provide me with step-by-step
instructions on how to do this? Thanks....

Similar Messages

Install Arch Linux with UEFI and GPT

Hi, I purchased a new laptop and I created a partition with Windows 8 (default OS on laptop) and another partition where I want to install Arch Linux.
When I tried to install Arch Linux not boot from CD. After searching in Google I downloaded the latest Arch Linux ISO (2012-12-01) and tried again.
This time CD started without problems but when I used cfdisk showed an error with GPT partition. I went back to search in Google and I read about gdisk and gfdisk and I try it but when I partitioning to install Arch Linux partition show that may cause damage. I searched and searched without success and I wonder if there is a Arch Linux GPT install guide or if someone knows how to install Arch Linux with GPT and a Windows 8 partition in UEFI.
Thanks and regards.

Hi again, finally I got "install" Arch Linux but when I reboot the follow message appears:
"No Booteable Device, Hit any key."
I don't know if I broke Windows Boot Manager, UEFI or both...
I tried to reinstall GRUB but was unsuccessful.
Can anyone help me?
Thanks and regards.

Want to install Oracle Linux Rel.6 and have a graphical interface

After reading:
Does Oracle Linux Rel.6 have graphical capabilities
How do you install the GUI for Oracle Linux Rel 6?

Dude wrote:
I'm glad you did not take my remark to call you a Linux enthusiast in bad way. It certainly was not meant to be a bad comment, but it's was probably silly of me to make such a remark anyway. I do not take personally offence easily in a forum like this. No, if you want to offend me, post poor code and claim it as the best thing since slice bread. ;-)
I guess I strive to be liberal, but by definition I don't think I really fit into any political wing.Likewise. Find politics a necessary evil to keep abreast of - such as the election in the US.
Back to Linux and your example, I have used such interfaces for many years too. Unfortunately we often have to use what is provided. However, the reason for the text interface is no longer valid, unless your input device is only a text based terminal.Not as much the input device - heck, pure tty devices are pretty much a thing of the past. It is about the complexity of the infrastructure between you and the device you need to administer. And about the task you need to perform.
The connectivity can mean being unable to run a GUI - due to performance, firewalls, router configurations and so on. The task at hand could very well be easily done, using the relevant o/s commands via a command line interface.
I think there is nothing against a GUI app that runs on your PC to sends appropriate commands to a text interface over a slow serial link, apart from the effort that is required to interact with errors, etc.Much more complex than that. A terminal server is usually used - and it attaches to the serial/RS232 connections of multiple devices that need to be administered. It will typically reside on a separate management network too, and not on the local company/corporate intranet.
So for you to access a device to administer, you need an open firewall to the management network to reach the management server that handles the serial console connection for the device you want to administer. You need a valid o/s account on that terminal server. You need to use ssh to access the command line of that terminal server. You need to enter the relevant command that will attach your ssh session to the RS232 console connection to the device to administer.
There is no GUI app on your side that can not only automagically do all this for you, but also provide you with GUI admin widgets to send commands to the remote device. Even if that remote device being sysadmin'ed is Linux, different distros and different versions of the same distros, means different commands, variances in command line parameters for such commands, and so on.
A sysadmin that cannot deal with such situations, and need a GUI as a crutch to administer a device.. I for one will not call that person a sysadmin. I would call the person incompetent instead. Harsh views perhaps, but being sysadmin is an unforgiving job. A mistake, or inability to access a device and fix it using the bare minimum, could result in severe financial loss for the company.

Error installing RAPID INSTALL R12 on Linux

I did a Rapid Install of Oracle Applications R12 (which contains 10g database) from the root user. After the installation, the system validates the configuration and it shows some problem with database availability. I have attached the log for database availability (bottom of this email), which shows the error "RW-50011: Error: - Apps ORACLE_HOME connection test has returned an error: 2"
Log for Database Availability :-
Database Availability
command: su oracle -c "/home/apps_rapid_install/startCD/Disk1/rapidwiz/bin/riwTDBup.sh /d01/oracle/VIS/db/tech_st/10.2.0/VIS_localhost.env APPS/APPS"
riwTDBup.sh started at Wed Sep 26 10:50:45 PDT 2007
Parameters passed are : /d01/oracle/VIS/db/tech_st/10.2.0/VIS_localhost.env APPS/APPS
The environment settings are as follows ...
ORACLE_HOME : /d01/oracle/VIS/db/tech_st/10.2.0
ORACLE_SID : VIS
TWO_TASK :
PATH : /d01/oracle/VIS/db/tech_st/10.2.0/perl/bin:/d01/oracle/VIS/db/tech_st/10.2.0/bin:/usr/bin:/usr/sbin:/d01/oracle/VIS/db/tech_st/10.2.0/appsutil/jre/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/bin:/home/apps_rapid_install/startCD/Disk1/rapidwiz/unzip/Linux:/usr/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/usr/java/jre1.5.0_06/bin:/root/bin:/sbin:/usr/sbin:/usr/java/jre1.5.0_06/bin
LD_LIBRARY_PATH : /d01/oracle/VIS/db/tech_st/10.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/d01/oracle/VIS/db/tech_st/10.2.0/lib:/usr/dt/lib:/d01/oracle/VIS/db/tech_st/10.2.0/ctx/lib
Executable : /d01/oracle/VIS/db/tech_st/10.2.0/bin/sqlplus
riwTDBup.sh exiting with status 0
Database ORACLE_HOME connection test has succeeded
command: su applmgr -c "/home/apps_rapid_install/startCD/Disk1/rapidwiz/bin/riwTDBup.sh /d01/oracle/VIS/inst/apps/VIS_localhost/ora/10.1.2/VIS_localhost.env APPS/APPS"
riwTDBup.sh started at Wed Sep 26 10:50:47 PDT 2007
Parameters passed are : /d01/oracle/VIS/inst/apps/VIS_localhost/ora/10.1.2/VIS_localhost.env APPS/APPS
The environment settings are as follows ...
ORACLE_HOME : /d01/oracle/VIS/apps/tech_st/10.1.2
ORACLE_SID :
TWO_TASK : VIS
PATH : /d01/oracle/VIS/apps/tech_st/10.1.2/bin:/usr/bin:/usr/ccs/bin:/usr/sbin:/usr/bin:/home/apps_rapid_install/startCD/Disk1/rapidwiz/unzip/Linux:/usr/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/usr/java/jre1.5.0_06/bin:/root/bin:/sbin:/usr/sbin:/usr/java/jre1.5.0_06/bin
LD_LIBRARY_PATH : /d01/oracle/VIS/apps/tech_st/10.1.2/lib32:/d01/oracle/VIS/apps/tech_st/10.1.2/lib:/usr/X11R6/lib:/usr/openwin/lib:/d01/oracle/VIS/apps/tech_st/10.1.2/jdk/jre/lib/i386:/d01/oracle/VIS/apps/tech_st/10.1.2/jdk/jre/lib/i386/server:/d01/oracle/VIS/apps/tech_st/10.1.2/jdk/jre/lib/i386/native_threads
Executable : /d01/oracle/VIS/apps/tech_st/10.1.2/bin/sqlplus
riwTDBup.sh exiting with status 2
RW-50011: Error: - Apps ORACLE_HOME connection test has returned an error: 2
As the database is not available, the login page does not come up. It gives this error.
Login Page
checking URL = http://localhost.localdomain:8016/OA_HTML/AppsLogin
RW-50016: Error: - {0} was not created:
File = {1}
Even the Configuration Upload gives this error :-
Configuration Upload
uploading config file at /d01/oracle/VIS/db/tech_st/10.2.0/appsutil/conf_VIS.txt
Failed upload of config file at /d01/oracle/VIS/db/tech_st/10.2.0/appsutil/conf_VIS.txt
Can you please advice on where I could be going wrong. There was no error during the installation. It seems that some setups may be missing in the Linux Box.

Hi Tom,
This excerpts the pre-upgrade patches MW recommends:
Patch 4685497...11i UPGRADE TO R12: OPTIONAL
PRE-UPGRADE PROGRAMS IN 11i Product: General Ledger
Patch 4676589...11i.ATG_PF.H.RUP4 Product:
Applications Technology Family
Patch 3438354...Patch 11i.ATG_PF.H Product:
Applications Technology Family
Patch 5120936...TUMS for R12: TO DELIVER TUMS UTILITY
FOR UPGRADES FROM 11i TO R12
Patch 4712852...Minipack 11i.AD.I.4 Product:
Applications DBA
Patch 4963569...CN UPGRADE - PRE-UPGRADE PATCH FOR
RELEASE 12.0 Product: Incentive Compensation
Patch 5382135...CSD R12 PRE-UPGRADE DATA VERIFICATION
PATCH UPDATE Product: Depot Repair
Patch 5259121...R12.FIN.A.UI.XB.3: ASM PRE/POST
DIAGNOSIS PROGRAM OUTPUT EDITS Product: General
Ledger
Patch 3649470...11i.10 Pre-Upgrade patch to find
carrier ship method inconsistencies Product: Shipping
Execution Common
Patch 3464936...AD.I NT PREREQ Product: Applications
DBA
Patch 5233248...SLA PRE-UPGRADE PROGRAM MODIFICATIONS
FOR 11i Product: Subledger Accounting.These are either optional pre-upgrade patches where you can control how much 11i data you migrate, or were included in the list of R12 upgrade patches provided.
And this excerpts the patches listed in 403339.1 Path C:
For all platforms:
* 4733582 - APPSPERF: AQ: UPGRADE SCRIPT
(A1001000.SQL) DELETES STATISTICS ON AQ TABLES. -
Product: RDBMS Server
* 4906594 - APPSST10201:ORA-39706 WHILE UPGRADE
FROM 8174 TO 10201 - Product: Oracle Intermedia
* 5567658 - ORACLE CONFIGURATION MANAGER UPDATE -
Product: Oracle Configuration Manager Family
* 5601428 - MLR BACKPORT FOR 5126270, 5238255 ON
TOP OF VERSION 10.2.0.2 - Product: RDBMS Server
* 4247037 - RFID-EPC GENERATION FEATURE FROM
DATABASE SERVER. TO BE USED WITH APPS WMS R12 -
Product: Spatial
* 4868804 - REGRESSION WHEN PATCH 4628170 IS
APPLIED TO 10.1.0.4 AND 10.2.0.1. ENV - Product:
RDBMS Server
* 4898580 - APPSST10G: UNABLE TO EXTRACT COMMENT
COLUMN DEFINITION ON A MVIEW - Product: RDBMS
Server
* 5005469 - NEED SCRIPT TO ASSIST WITH MIGRATION
FROM KOREAN_LEXER TO KOREAN_MORPH_LEXER - Product:
Oracle Text
* 5153209 - R12: AS10G: REHOST JRE 1.5.0_06 FOR
RDBMS ORACLE HOME 10.2.0.2 - Product: Techstack
* 5477912 - APPST:MEMORY LEAK ISSUE FOR R12 -
Product: RDBMS Server
* 5865568 UPDATE TO JVM TIME ZONE CLASSES NEEDED -
Product: Java/VM
or Linux and Unix only:
* 4380928 - APPSST102 : ALTER MATERIALIZED VIEW
LOG FAILS WITH ORA-03113 ERROR - Product: RDBMS
Server
* 4518443 - LISTENER GETS HUNG UP - Product:
Oracle Database Family
* 4592596 - APPSST102: ORA-01410 INVALID ROWID
WHEN SELECTING FROM A TABLE - Product: RDBMS Server
* 4639977 - APPSST102: ORA-00600: [KKQCBY: QBCFKKC
NOT ZERO], - Product: RDBMS Server
* 4643322 - APPSST: GETTING ERROR "ORA-22167"
WHILE DOING BULK UPDATE OPERATION - Product: RDBMS
Server
* 4686006 - QUERY ON VIEW WITH EXISTS AND HAVING
CLAUSE RAISES ORA-600 [KKQSALJG:NOBJS IS 0] -
Product: RDBMS Server
* 4689959 - DST RULE CHANGE IN US, NEED PATCHED
TIMEZONE FILES - Product: CORE
* 4744317 - SCMATGR12:D5 APPSST-XSLT TRANS FAILS
WHEN TAG CONTAINS '_' AT BEGINNING IN 10GR2 -
Product: XML Developers Kit
* 4751145 - ARRAYINDEXOUTOFBOUNDSEXCEPTION ON
QUERY EXECUTION WITH 10G JDBC - Product: JDBC
* 4932527 - CLIENT SIDE PLSQL CRASHES PASSING
RECORD PARAMETER TO STORED FUNCTION - Product: RDBMS
Server
* 4949257 - UNNESTED SUBQUERY RETURNS WRONG RESULT
- Product: RDBMS Server * 4966417
* 4967236 - APPSST10201:ORA 600[17282], WHILE
PERFORMING DATA IMPORT. R12 PROJECT - Product: XML
Developers Kit
* 5128946 - APPSPERF: RDBMS: MEMORY LEAK DUE TO
DDL REPARSE - Product: RDBMS Server
* 5150177 - APPSST: CREATE INTERMEDIA (TEXT)
INDEX ON 10G TAKES A LONG TIME - Product: Oracle
Text
* 5206570 - DUMP IN KSUSRS() WHEN SESSION FROM SQL
DEVELOPER IS SNIPED - Product: RDBMS Server
* 5254539 - INTERNAL ERROR CODE ON EXECUTING
HIERARCHICAL QUERY - Product: RDBMS Server
* 5434572 - MERGE LABEL REQUEST ON TOP OF 10.2.0.2
FOR BUGS 5106909 4151363 - Product: RDBMS Server
* 5455623 - MERGE LABEL REQUEST ON TOP OF 10.2.0.2
FOR BUGS 5392772 4759183 - Product: RDBMS Server
* 5460159 - MERGE LABEL REQUEST ON TOP OF 10.2.0.2
FOR BUGS 4417341 5092134 - Product: RDBMS Server
* 5548758 - MERGE LABEL REQUEST ON TOP OF 10.2.0.2
FOR BUGS 5253806 5125886 5117856 - Product: RDBMS
Server
* 5718367 - MERGE LABEL REQUEST ON TOP OF 10.2.0.2
FOR BUGS 5647056 5691091 5199213 - Product: RDBMS
Server
* 4450497 - UPGRADE 9.0.1.4.0 TO 10.1.0.4 RESULTS
IN SDO_INDEX_METADATA NULL FETCH - Product: Spatial
* 5066528 -
DBMS_TRACE.SET_PLSQL_TRACE(DBMS_TRACE.TRACE_ALL_EXCEP
IONS) ROWS - Product: PLSQL
* 5612127 - (Except HP-UX Itanium) THE OLAP C-
MINUS PATCH - Product: Oracle OLAPThese patches are required if you upgrade you 11.5.9 or higher 9i database to 10.2.0.2 in preparation for an R12 upgrade. You can do this and run 11i on 10.2.0.2 for some time before the R12 upgrade in order to split up your downtimes. When you install the R12 Upgrade Filesystem, the 10.2.0.2 Oracle Home includes all of these database patches already. After the database upgrade, you just need to run the manual steps from these patch readmes, which can be condensed down to the following:
cd $ORACLE_HOME/rdbms/admin
sqlplus “/as sysdba”
spool post_install.log
@?/rdbms/admin/catdph
@?/rdbms/admin/catdpb
@?/md/admin/catmgdidcode
@?/rdbms/admin/dbmsxmld.sql
@?/rdbms/admin/prvtxmld.plb
@?/rdbms/admin/dbmspbt.sql
@?/rdbms/admin/prvtpbt.plb
@?/rdbms/admin/tracetab.sql
@?/rdbms/admin/prvtaw.plb
@?/olap/admin/apsrelod.sql
@?/olap/admin/xoqrelod.sql
@?/olap/admin/amdpatch.sql
@?/rdbms/admin/utlrp.sql
cd $ORACLE_HOME/md/admin
alter session set current_schema=MDSYS;
@?/md/admin/prvtimd.plb
spool off
exit
cd ORACLE_HOME/javavm/lib/zi/
@fix5075470a.sql
shutdown immediate
startup
@fix5075470b.sql
Install OLAP and ODM for R12 Analytical Workspaces:
Install Oracle Data Mining and OLAP (conditional)
Verify that Oracle Data Mining and OLAP are installed in your database by using SQL*Plus to connect to the database as SYSDBA and running the following command:
SQL> select comp_id from dba_registry where comp_id='ODM' or comp_id='AMD';
If the query does not return ODM, then you do not have Oracle Data Mining installed. To install Data Mining, use SQL*Plus to connect to the database as SYSDBA and run the following command:
SQL> @$ORACLE_HOME/rdbms/admin/dminst.sql SYSAUX TEMP
If the query does not return AMD, then you do not have OLAP installed. To install OLAP, use SQL*Plus to connect to the database as SYSDBA and run the following command:
SQL> @$ORACLE_HOME/olap/admin/olap.sql SYSAUX TEMP

Can any one help me. I tried to install Oracel 8.1.5 on RedHat Linux 7.0 and failed.

I am running my system with RedHat Linux 7.0 and tried to install Oracle 8.1.5.
I extracted jre required files and when i tried to start ./runIns.sh from install/linux directory it is giving me an error Unable to initalize threads: cannot find class Java/lang/Thread
Could not create JVM
i tried 3 times and i ended up here and i need instruction to sort out the problem as earlier as possible.pls do advice me in this.
pls send the solution ASAP to my email id - ([email protected])

Make sure you have IBM's Java 1.1.8 JRE/JDK installed on your server and $JAVA_HOME set. Check the Oracle installation instructions. One other problem with Red Hat 7.0. is that
there is a libc library incompatibility problem with Red Hat linux 7.0 and Oracle 8i. The database will not start after you install it. Go to MetaLink (if you have support) and search for document # 121176.1. Basically, you have to download an older version of glibc, modify your Oracle link environment files, re-link the database executables and all will work normally. I did it on my Red Hat Linux 7.0 server two weeks ago and everything is working fine. Only other alternative is downgrade to Red Hat 6.2.

Do any one help me. I tried to install Oracel 8.1.5 on RedHat Linux 7.0 and failed.

I am running my system with RedHat Linux 7.0 and tried to install Oracle 8.1.5.
I extracted jre required files and when i tried to start ./runIns.sh from install/linux directory it is giving me an error Unable to initalize threads: cannot find class Java/lang/Thread
Could not create JVM
i tried 3 times and i ended up here and i need instruction to sort out the problem as earlier as possible.pls do advice me in this.

Oracle 8i is not compile/link time compatible with glibc 2.2. It
requires the glibc 2.1 compatibility SDK, i386-glibc-2.1-linux.tar.gz,
to install under systems based on glibc 2.2, like RedHat 7.0.
RedHat 7.0 ships with glibc 2.2. Oracle compiles with glibc 2.1. See the problem here? The good folks at valinux.com have created a compatiblitly SDK that will "fix" Redhat so you can install Oracle 8i. Go to the following link to learn more:
http://ftp.valinux.com/pub/support/hjl/glibc/sdk/2.1/readme.Oracle8i - This is the instructions for installing the patch. Return to this document at Step 4, where they tell you to "Install Oracle 8i." http://ftp.valinux.com/pub/support/hjl/glibc/sdk/2.1/i386-glibc-2.1-linux.tar.gz - This is the actual SDK.
null

Does any one help me. I tried to install Oracel 8.1.5 on RedHat Linux 7.0 and failed.

I am running my system with RedHat Linux 7.0 and tried to install Oracle 8.1.5.
I extracted jre required files and when i tried to start ./runIns.sh from install/linux directory it is giving me an error Unable to initalize threads: cannot find class Java/lang/Thread
Could not create JVM
i tried 3 times and i ended up here and i need instruction to sort out the problem as earlier as possible.pls do advice me in this.

Vijaya zi,
Are you still having problem..with this..let me know??
first of all 8.1.7 , or 8.1.6. 8.1.5 neither one of these are certified to work with linux 7.0 Redhat.
Secondly there is a work around you could try..assuming that you have set the enviroment varaible and JVM corrent..( let me know if you need help with this)
here u go...
There is this linux gnu lib file which oracle is looking for which was there in 6.x and not in 7.0.
However if you have upgraded from 6.X linux to 7.0 then it will work..
for some reason it is looking for this glibc file.
either way the oracle message it is giving is not relavant...
it is just not going to work...unless you find a way to implement that glibc file..
I had link..which talk about the work around..
RedHat 7.0 issues
RedHat 7.0 ships with glibc 2.2. Oracle compiles with glibc 2.1. See the problem here? The good folks at valinux.com have created a compatiblitly SDK that will "fix" Redhat so you can install Oracle 8i. Go to the following link to learn more: http://ftp.valinux.com/pub/support/hjl/glibc/sdk/2.1/readme.Oracle8i -
This is the instructions for installing the patch. Return to this document at Step 4, where they tell you to "Install Oracle 8i." http://ftp.valinux.com/pub/support/hjl/glibc/sdk/2.1/i386-glibc-2.1-linux.tar.gz -
This is the actual SDK.
WARNING! WARNING! WARNING!
The procedure for RedHat 7.0 is not officially approved by Oracle. If you are putting a mchine into production, I would strongly recommend sticking with RedHat 6.2 instead (and patching the security holes in it). There are other problems with RedHat 7.0 that extend beyond Oracle. Personally, I'm waiting for 7.1 before I think hard about migrating
hope this help...
NOTE ---> ORACLE DOES NOT SUPPORT THIS METHOD.
Good Luck
Shah
null

Problem installing Oracle 9.2 on RedHat Linux 7.1 and 9.0

Hi everyone,
As the subject line says, I tried installing Oracle 9.2 on
RedHat Linux 7.1 and 9.0, strictly following instructions
written by Werner Puschitz
(http://www.puschitz.com/InstallingOracle9i.shtml). Both
attempts failed with identical symptoms:
- the installer asks for Disk 2
- after the disk is inserted, it hangs. It turns out that
kernel is writing messages similar to these in
/var/log/messages:
Jun 16 02:45:19 boston kernel: 16:00: rw=0, want=317696, limit=149920
Jun 16 02:45:19 boston kernel: attempt to access beyond end of device
Unless interrupted, this continues until the /tmp filesystem gets full.
Has anyone experienced this? I haven't been able to find
an explanation so far.
Any help would be much appreciated.
Regards,
Ljubomir Buturovic

Providing a thread-bare configuration of your machine on which you are trying to install Oracle on Linux (and mind you - which kernel/distro, coz that's important) would definitely help you elicit more responses to your messages.

Can OAS9i and Portal be installed on Linux RedHat(kernel 2.2.19) platform?

Hi,
My question is the same as the subject written.
Can OAS9i and Portal be installed on Linux RedHat(kernel 2.2.19) platform? Basically, first, I can't find the OAS9i "*.cp" image files for RedHat Kernel 2.2.16 or later use, second, what I can download from OTN site is V1.0.2.2.1 which is for Linux RedHat Kernel 2.4.3-12 or later use. And I downloaded all the files which OAS9i version is V1.0.2.2.1, and failed to install on my platform. So I want to know is there anybody installing OAS9i and Portal successfully on RedHat 6.2(Kernel 2.2.19, glibc 2.1.3)? Or can share on other RedHat version had any successful installation processes or suggestion. Thanks in advance.
Regards!
Frank

9iAS 1.0.2.x is only supported on Redhat 7.0 and Suse 7.2
Portal PM

Installing Grid Infrastructure 11.2.0.2 fails on Oracle Linux 5.6 and 6.0

Hi all,
We are in the process of building our new enterprise environment and tried to install the following:
Oracle Linux 6.0
Grid Infrastructure 11.2.0.2
ASM
OCFS2
Oracle RDBMS 11.2.0.2
Installation of Grid Infrastructure failed on Oracle Linux 6.0 and 5.6 as well. Is it because it's not yet certified for these Oracle Linux versions? Where can we find compatibility matrixes or certification information to find out which versions do work together? Been trying to find them with no success.
Thanks for any help!

Dude wrote:
I have recently installed Oracle 11.2.0.2 including ASM, which also installs Grid infrastructure under Oracle Linux 5.6 (default UEK kernel) without any problems. I installed the oracle-validated package prior to the Oracle installation.OEL 5.6 and 11.2..02 Grid Infrastructure installation (for x86_64) failed in our case. Have opened a SR several weeks ago for it, but no resolution. We since reverted back to OEL 5.5 for building and running this specific RAC.
There's also errors in OEL 5.6's Infiniband s/w stack. The openibd service fails to apply errata correctly because the o/s command used has since changed command line parameters. My guess is that testing happened solely on new h/w where this errata did not have to be applied, thus were not tested. Also, this service failed to start the srp_daemon (is critical for making sure that the storage layer works each and every time and does not cause stale connections that lead to command rejections from the storage server after a reboot of a RAC node)
I not only had to fix the openibd service to correctly apply the errata, but also write a separate srpd service that dealt with starting up and shutting down the srp_daemon.
Not very impressed with OEL 5.6 at all and it will be unlikely that we'll use it. And it raises a lot of concern whether OEL 6 would be a robust enough o/s for running our RAC systems.

Uninstall Oracle10g from RedHat Linux 5 Server and install Oracle11g

Hi to all,
I must uninstall Oracle 10g from Red Hat Linux 5 Server and then I must install Oracle 11g.
How I can remove all things of Oracle10g for install after Oracle 11g?
Thank you in advance,
crystal

crystal13 wrote:
Hi to all,
I must uninstall Oracle 10g from Red Hat Linux 5 Server and then I must install Oracle 11g.
How I can remove all things of Oracle10g for install after Oracle 11g?
Thank you in advance,
crystalCheck the following link
http://database.itags.org/oracle/267935/

Need to know how to enable Java on Linux Mint 11 and how to install R statistical language

I cannot install the "R" program for Linux Mint 11 and i also need to enable java..how to do these two things...? send link that will be install for both actions please. i am flying blind..i do not have windows.. i have Linux Mint 11 Oper system

See http://en.wikipedia.org/wiki/R_%28programming_language%29
Google "R statistical language" (with quotes) for more results
Try to start R via: <b>LANG=en_US R</b>

Insert the DVD labeled Oracle Applications Rapid Install - Rdbms Disk 1 and

Hi Hussein,
It's not about Staging area. I am also facing the same issue:
elect Option 1 for a complete Oracle Application Environment Install.
    1 - Complete Oracle Apps Env (11g, Database, 10.1.2, 10.1.3, APPL & COMM)
Or choose the individual components you want staged
    2 - Database Technology Stack Only (11g)
    3 - Database Only (Vision or Fresh)
    4 - Applications Technology Stack Only (10.1.2, 10.1.3)
    5 - APPL_TOP & COMMON_TOP Only
Enter number codes separated by spaces [1]:
Checking diskspace ...Ok.
Staging startCD ...Done.
Staging Rdbms ...
Insert the DVD labeled Oracle Applications Rapid Install - Rdbms Disk 1 and press <ENTER>:
Invalid Disk is inserted.
Please insert DVD labeled Oracle Applications Rapid Install - of Rdbms Disk 1
Insert the DVD labeled Oracle Applications Rapid Install - Rdbms Disk 1 and press <ENTER>:
Invalid Disk is inserted.
Please insert DVD labeled Oracle Applications Rapid Install - of Rdbms Disk 1
Insert the DVD labeled Oracle Applications Rapid Install - Rdbms Disk 1 and press <ENTER>:
I think it's a problem with DVDs. Not sure how to check integrity of DVDs?
-Hansal

Hansal,
md5sum will verify the integrity of the stage area directory but not the integrity of the CDs/DVDs.
To check the contents of the Media Pack, try to view the contents of the DVD itself (use ls command).
If downloading files from https://edelivery.oracle.com/ website is not an option for you then you may need to log a SR and ask Oracle support to send you another Media Pack.
Thanks,
Hussein

Install questions on OVM Manager and Oracle Linux

I installed OVM Server 3.0.3 on a 64-bit server class box.
Getting tight with a spare box, I tried to install OVM Manager on the Oracle VirtualBox as a VM and also to install it on the top of OVM Server on the same hardware box but neither has been successful.
So, I'm thinking of rather installing OVM Manager on one of my laptops.
Before proceeding to wipe out the data on my laptop, I'd like to check couple of things:
1. I take it that the 32-bit OVM Manager should have no problem working with 64-bit OVM Server, correct?
2. The OVM Manager itself doesn't include with a bootable Linux image and should be installed on the top of a pre-installed Linux (e.g., Oracle Linux), so I need to install Oracle Linux first on my laptop and install OVM Manager on top of it, right?
Thanks for your help in advance!
- Young

user7259518 wrote:
1. I take it that the 32-bit OVM Manager should have no problem working with 64-bit OVM Server, correct?That's fine.
2. The OVM Manager itself doesn't include with a bootable Linux image and should be installed on the top of a pre-installed Linux (e.g., Oracle Linux), so I need to install Oracle Linux first on my laptop and install OVM Manager on top of it, right?Correct. You'll need at least 4GB of RAM for the Manager for a test/development environment, with 8GB+ recommended for Production, to cover both Oracle Database SE and Oracle WebLogic.

My OS X 10.9 corrupted and i cleaned everything and installed ubuntu linux. I need clean install OSX again and i cant able to reach OS utility now. Please advise

My OS X 10.9 corrupted and i cleaned everything and installed ubuntu linux. I need clean install OSX again and i cant able to reach OS utility now. Please advise

You cannot use a Windows machine.
No idea if this will work because you have/had Ubuntu installed - hit Command + Option + R keys while restarting/booting up. Once in the Utilities, make sure the drive is formatted correctly and erase it, then reinstall the OS.

Rapid Install on Linux 7.1 and 7.2

Similar Messages

Maybe you are looking for