Rapid Installer EP - license not applied

I have installed an EP with Rapid Installer (which is an EP 7 SPS 7 as far I undertand). I have applied the following licenses:
- J2EE-Engine_ADA and
- NetWeaver_ADA
The license installation from file was declared "SUCCESSFUL"
Nevertheless the Server shuts down after 10 minutes
Any hint what is going wrong?

Timed out

Similar Messages

  • Good evening I would please help me, IGood evening I would please help me, I have problems with flash player when update on my computer Flash Player for windows 8, gives me error in the installation that is not apply on my computer. Please help. Thank You

    Good evening I would please help me, IGood evening I would please help me, I have problems with flash player when update on my computer Flash Player for windows 8, gives me error in the installation that is not apply on my computer. Please help. Thank You

    First, confirm that ActiveX Filtering is configured to allow Flash content:
    https://forums.adobe.com/thread/867968
    Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
    You can try to work around these issues by using Compatibility View:
    http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11
    If that is too inconvenient, using Google Chrome may be a preferable alternative.

  • Deploying Office 2013 x64 - feature installation state msp not applying

    So I created my MSP with setup.exe /admin and configured a number of options in it. I saved the msp as "1Office64bit.msp" and saved it into the Updates folder. I also have a service pack for Office 2013 in the Updates folder.
    I created an SCCM application to deploy office. My deployment installation program looks like this - setup.exe /config proplus.ww\config.xml
    During my SCCM Build and Capture task sequence Office 2013 installs, the updates apply, and all of the settings in the MSP apply except for one. I specificed in the msp feature installation states to NOT install the Outlook feature, but it's not working?
    Also - as a test after the task sequence completes, I run "msiexec /p \\pathtomsp\1Office64bit.msp - and it removes Office like it should. But I don't know why this doesn't happen during the initial installation?

    You should use either a config xml file or an MSP during the installation of Office (2013). In your current command line it looks like you're trying to use both. As you saved the MSP file in the updates folder, simply specifying setup.exe should be enough
    to start the installation and let it use the MSP.
    My Blog: http://www.petervanderwoude.nl/
    Follow me on twitter: pvanderwoude
    So I tried just running setup.exe and it doesn't seem to be working either. I verified in the ccm appenforce.log that the install command was just setup.exe (so the change made it to the client) but Outlook was still installed.
    I'm going to try changing it to setup.exe /adminfile to see if that works.

  • Error in ERP 6.0 Rapid Installer - "brconnect.exe - Entry Point Not Found"

    Hi
    I have the installer for ERP 6.0 + NW 7.0, but option "SAP System" was missing in installation menu.
    Then I downloaded ERP 6.0 (Rapid Installer, Oracle) from market place
    Followed the following steps
        - Install Oracle 10.2.0.1.0
        - Install downloaded ERP 6.0 (Rapid Installer)
        - But this stopped with an error
            brconnect.exe - Entry Point Not Found
                The procedure entry point longjmp could not be located in the dynamic link library orauts.dll.
    orauts.dll is oracle' client dll
    When I checked BRTool' version using command
        *************************************************************************************************************************C:\Documents and Settings\Administrator.CING4468>brtools -V
    BR0651I BRTOOLS 7.00 (6)
    Patch   Date     Info
    release note               849483
    kernel release             700
    patch date                 2005-08-31
    patch level                6
    make platform              NTintel
    make mode                  OCI_10103_SHARE
    make date                  Sep 19 2005
    Here make mode is "OCI_10103_SHARE"
    Rapid installer guide as well as documentation shows that this setup supports Oracle 10.2 but BRTools version shows compatibility with 10.1.
    Is it error because of database version mismatch?
    Thanks !
    Ruhi Hira

    Check for the ora<sid> group and also check the env variable for ora<sid>. This should solve the issue.

  • Acrobat 8 Standard will not apply transform file during installation

    I also posted this in the Acrobat form before I noticed this Enterprise Installation forum.
    I am using the Adobe 8 customization wizard to create an MST file for Acrobat 8 Standard. The MST file disables automatic updates, Acrobat Connect and several other items, however, when I run the install with the transform, none of the changes in the MST are applied. I am using the following command inside a batch file:
    msiexec /i acrostan.msi TRANSFORMS=ACROSTAN.MST /qb
    I am using the Standard files downloaded from Adobe's secure site, which were then unzipped and used with the customization wizard. I did not create an administrative installation point, as that earlier attempt also resulted in not applying the transform.
    I believe the transform file is correct, as I found the above command will work the second time I try to install Standard, but does not work the first time Standard is installed using the MST file.

    can you post your transform somewhere? take out the serial number before posting. You might also want to create an install log.

  • Installed Netweaver 2004s with Rapid Installer , can not connet to BI7.0!!!

    Hi,
    I installed Netweaver 2004s with rapid installer but i can not connect to BI7.0 with SapLogon 710. SapLogon waiting for response forever. What are the post actions after I installed the Netweaver 2004s. I can connect to portal by IE.
    I am new to this so any help will be greatly appreciated.
    thanks,
    Jenni

    OS is Windows Server. SAPID is IKI. I am the only one trying to connect to BI so DPMON is not the issue. I wanted to stop and start the SAPIKI_03 service but I can not stop it, maybe it is related to that.
    What are the post steps after installing rapid installer?
    How can I make sure that I installed Java+Abap stack or only Java?
    Thank you for your help.
    jenn

  • AcroRead.mst settings not applied in installation

    Hello,
    I downloaded Adobe reader 11, dutch (AdbeRdr11000_nl_NL.exe) and extracted it:
    AdbeRdr11000_nl_NL.exe -nos_oc:\temp\temp1\files\2 -nos_ne
    Then I opened the .MSI file with the Adobe customization wizard and changed some settings (Eula, updates etc).
    After that I saved it and AcroRead.mst was created.
    Then on the client (logged in as Administrator) I copied all the files in c:\temp and entered:
    msiexec.exe /i AcroRead.msi TRANSFORMS="AcroRead.mst" /quiet
    Adobe reader gets installed and I can open it but the changes from the customization wizard are NOT applied.
    When I start adobe, I get the EULA and the product updates are still configured as automatic.
    I tried with other settings and full path names like these:
    msiexec.exe /i "c:\temp\adobe\AcroRead.msi" TRANSFORMS="c:\temp\adobe\AcroRead.mst" /quiet
    msiexec.exe /i AcroRead.msi TRANSFORMS=AcroRead.mst /quiet
    msiexec.exe /i /qn AcroRead.msi TRANSFORMS=AcroRead.mst
    msiexec.exe /i "AcroRead.msi" /q TRANSFORMS="AcroRead.mst"
    msiexec.exe /i AcroRead.msi /q TRANSFORMS="AcroRead.mst"
    But the result is the same, Adobe reader is installed but without the changed settings.
    Could someone help with this please ?
    I don't know anymore what to do.
    thanks.

    Copy the examples from http://www.adobe.com/devnet-docs/acrobatetk/tools/AdminGuide/cmdline.html#command-line-exa mples so that you don't have to try random cmd lines. For example, quotes are only used around property params.
    Enable logging, and if you still have problems, post you cmd line and log.
    hth,
    Ben

  • "Logon refused (valid license not installed)" after sap db restore ?

    Hi,
    I just restored my production db on test systm. It looks like things went ok - sap started with no errors. When I tried to logon I got this:
    "E: Logon refused (valid license not installed)"
    What steps should I take to resolve this ?
    thanks
    Vilius

    Hi,
    Using sap* user ? What is asterisk - it's just asterisk or it represents some unique number ? What password I shoud use
    it is just asterisk .SAP*  & DDIC are the default user name . Password is defined  at the time of installation .Password in client 000 Of PRD system & in client of your new system is same.U can install saplicense at OS level .First of all apply for new license at SAPmarket place & than install it in your system
    Karan
    Edited by: karan Singh on Aug 2, 2008 1:12 PM

  • Rapid Installation

    Hi Victor,
      Any idea why SAP has not come up a rapid installer for the Netweaver 2004s. It seems they have come up with an installer for everything else but the I5/OS systems.
    thanks,
    Greg

    There is now a rapid installation of SAP on System i. It is called KOBI project tape image. What happens is that the System i developer team in Walldorf installs SAP in their machine and save the entire systsem into a tape media and send it to the implementor for use.  All i5/OS PTFs and SAP Kernel patches are also applied to the most update level for you.
    I just used two KOBI tapes (one for PRD, the other for DEV+QAS) to restore for my customer last week and it worked fine. Contact your local IBM System i unit on this.

  • This installation package could not be opened. Verify that the package exists and that you can access it, or contact the applikcation vendor to verify that this is a valid Windows Installer package." How to fix this installation error?

    Does anyone know, how to fix  ' This installation package could not be opened. Verify that the package exists and that you can access it, or contact the applikcation vendor to verify that this is a valid Windows Installer package." ?

    At what point in the process are you getting this message? Have you tried downloading a fresh copy of the iTunes setup file from http://www.apple.com/itunes/download/ ?
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • UDI wizard is not applying TimeZone setting (MDT2013)

    Hi All,
    I am working on MDT2013 to create Windows7-64bit Image for OEM vendor. Note:- I am not using any SQL database.
    I have customized the UDIWizard_Config.xml where it should ask for UIlanguage, Inputlocale and Timezone. I am calling this UDI wizard xml in Tasksequence after gathering locally here the problem is after completing the build its not applying the Timezone
    setting in image.
    Any one aware about this issue? why UDI wizard is not applying the Timezone setting in image? 
    I have attached the below UDI wizard XML. please answer and ask if you require any more details..
    <?xml version="1.0" encoding="UTF-8"?>
    -<Wizard>
    -<DLLs>
    <DLL Name="OSDRefreshWizard.dll"/>
    <DLL Name="SharedPages.dll"/>
    </DLLs>
    -<Style>
    <Setter Property="bannerFilename">UDI_Wizard_Banner.bmp</Setter>
    <Setter Property="title">Operating System Deployment (OSD) Wizard</Setter>
    </Style>
    -<Pages>
    -<Page Name="WelcomePage" Type="Microsoft.SharedPages.WelcomePage" DisplayName="Welcome">
    -<Fields>
    -<Field Name="WelcomeText" Summary="" Enabled="true">
    <Default> Welcome to the Deployment Wizard. This wizard will walk you through a series of screens that will allow you to choose Language type. Click on the 'Next' button to start your selected language pack installalation. Please allow 1 hours for installation. If you need support during this process, please e-mail your system administrator. </Default>
    </Field>
    </Fields>
    </Page>
    -<Page Name="ConfigScanPage" Type="Microsoft.OSDRefresh.ConfigScanPage" DisplayName="Deployment Readiness">
    -<Tasks StatusTitle="Status" NameTitle="Configuration Check Name">
    -<Task Type="Microsoft.Wizard.ShellExecuteTask" DisplayName="Check Windows Scripting Host">
    <Setter Property="filename">%windir%\system32\cscript.exe</Setter>
    <Setter Property="parameters">Preflight\OSDCheckWSH.vbs</Setter>
    <Setter Property="BitmapFilename">images\WinScriptHost.bmp</Setter>
    -<ExitCodes>
    <ExitCode Type="0" Text="" Value="0" State="Success"/>
    <ExitCode Type="-1" Text="Windows Scripting Host not installed." Value="*" State="Error"/>
    </ExitCodes>
    </Task>
    -<Task Type="Microsoft.SharedPages.WiredNetworkTask" DisplayName="Wired Network Check">
    <Setter Property="BitmapFilename">images\WiredNetwork.ico</Setter>
    -<ExitCodes>
    <ExitCode Type="0" Text="" Value="0" State="Success"/>
    <ExitCode Type="-1" Text="No Wired connection found. Please plug in to a network cable." Value="*" State="Error"/>
    </ExitCodes>
    </Task>
    -<Task Type="Microsoft.OSDRefresh.AppDiscoveryTask" DisplayName="Application Discovery">
    <Setter Property="readcfg">$LogPath$\OSDSetupWizard.xml.app</Setter>
    <Setter Property="writecfg">%temp%\AppDiscoveryresult.xml.app</Setter>
    <Setter Property="log">$LogPath$\AppDiscovery.log</Setter>
    <Setter Property="BitmapFilename">images\AppDiscovery.ico</Setter>
    -<ExitCodes>
    <ExitCode Type="0" Text="Successfully scanned applications." Value="0" State="Success"/>
    <ExitCode Type="1" Text="Could not run application discovery engine (reason unknown). The appropriate applications may not be selected." Value="*" State="Warning"/>
    <ExitCode Type="1" Text="One or more warnings were encountered (nonfatal) while running App Discovery. The appropriate applications may not be selected." Value="1" State="Warning"/>
    <ExitCode Type="1" Text="Critical problems were encountered while initializing App Discovery. The appropriate applications may not be selected." Value="16777216" State="Warning"/>
    <ExitCode Type="1" Text="Critical problems were encountered while processing the Application Master List. The appropriate applications may not be selected." Value="33554432" State="Warning"/>
    </ExitCodes>
    </Task>
    -<Task Type="Microsoft.Wizard.ShellExecuteTask" DisplayName="Get Printers">
    <Setter Property="filename">%windir%\system32\cscript.exe</Setter>
    <Setter Property="parameters">Preflight\OSD_GetPrinters.vbs /xmlout:%temp%\PrinterList.xml;$LogPath$\PrinterList.xml</Setter>
    <Setter Property="BitmapFilename">images\Printers.ico</Setter>
    -<ExitCodes>
    <ExitCode Type="0" Text="" Value="0" State="Success"/>
    <ExitCode Type="1" Text="Output filename not specified correctly." Value="10" State="Warning"/>
    <ExitCode Type="1" Text="Unable to create output file." Value="20" State="Warning"/>
    <ExitCode Type="1" Text="An unknown error has occurred." Value="*" State="Warning"/>
    </ExitCodes>
    </Task>
    -<Task Type="Microsoft.Wizard.ShellExecuteTask" DisplayName="CheckSMSFolderOnUSB">
    <Setter Property="filename">%windir%\system32\cscript.exe</Setter>
    <Setter Property="parameters">Preflight\CheckSMSFolderOnUSB.vbs</Setter>
    <Setter Property="BitmapFilename">images\USB.bmp</Setter>
    -<ExitCodes>
    <ExitCode Type="0" Text="" Value="0" State="Success"/>
    <ExitCode Type="-1" Text="Please disconnect any USB Drives at this time, cancel the wizard, and start the task sequence over." Value="*" State="Error"/>
    <Error Type="-1" Text="The path not found" Value="2" State="Error"/>
    <Error Type="-1" Text="The file not found" Value="3" State="Error"/>
    </ExitCodes>
    </Task>
    -<Task Type="Microsoft.OSDRefresh.ACPowerTask" DisplayName="AC Power Check">
    <Setter Property="BitmapFilename">images\ACPower.bmp</Setter>
    -<ExitCodes>
    <ExitCode Type="0" Text="" Value="0" State="Success"/>
    <ExitCode Type="-1" Text="No AC power detected. Please plug in to power." Value="*" State="Error"/>
    </ExitCodes>
    </Task>
    -<Task Type="Microsoft.Wizard.ShellExecuteTask" DisplayName="Check Drive Encryption">
    <Setter Property="filename">%windir%\system32\cscript.exe</Setter>
    <Setter Property="parameters">Preflight\OSDBitlockerState.vbs %systemdrive%</Setter>
    <Setter Property="BitmapFilename">images\bitlocker.ico</Setter>
    -<ExitCodes>
    <ExitCode Type="0" Text="" Value="0" State="Success"/>
    <ExitCode Type="1" Text="Drive is fully encrypted. Encryption will be paused during deployment and resumed." Value="1" State="Warning"/>
    <ExitCode Type="1" Text="Drive encryption is paused. Encryption will resume after deployment has completed." Value="4" State="Warning"/>
    <ExitCode Type="1" Text="Drive encryption is paused. Encryption will resume after deployment has completed." Value="5" State="Warning"/>
    <ExitCode Type="-1" Text="Drive is currently encrypting. Please fully encrypt or pause encryption to continue." Value="2" State="Error"/>
    <ExitCode Type="-1" Text="Drive is currently decrypting. Please fully decrypt or pause decryption to continue." Value="3" State="Error"/>
    <ExitCode Type="-1" Text="A script error was detected. Please contact support to continue." Value="*" State="Error"/>
    </ExitCodes>
    </Task>
    </Tasks>
    </Page>
    -<Page Name="ConfigScanBareMetal" Type="Microsoft.OSDRefresh.ConfigScanPage" DisplayName="Deployment Readiness">
    -<Tasks StatusTitle="Status" NameTitle="Configuration Check Name">
    -<Task Type="Microsoft.Wizard.ShellExecuteTask" DisplayName="Check Windows Scripting Host">
    <Setter Property="filename">%windir%\system32\cscript.exe</Setter>
    <Setter Property="parameters">Preflight\OSDCheckWSH.vbs</Setter>
    <Setter Property="BitmapFilename">images\WinScriptHost.bmp</Setter>
    -<ExitCodes>
    <ExitCode Type="0" Text="" Value="0" State="Success"/>
    <ExitCode Type="-1" Text="Windows Scripting Host not installed." Value="*" State="Error"/>
    </ExitCodes>
    </Task>
    -<Task Type="Microsoft.SharedPages.WiredNetworkTask" DisplayName="Wired Network Check">
    <Setter Property="BitmapFilename">images\WiredNetwork.ico</Setter>
    -<ExitCodes>
    <ExitCode Type="0" Text="" Value="0" State="Success"/>
    <ExitCode Type="-1" Text="No Wired connection found. Please plug in to a network cable." Value="*" State="Error"/>
    </ExitCodes>
    </Task>
    -<Task Type="Microsoft.OSDRefresh.ACPowerTask" DisplayName="AC Power Check">
    <Setter Property="BitmapFilename">images\ACPower.bmp</Setter>
    -<ExitCodes>
    <ExitCode Type="0" Text="" Value="0" State="Success"/>
    <ExitCode Type="-1" Text="No AC power detected. Please plug in to power." Value="*" State="Error"/>
    </ExitCodes>
    </Task>
    -<Task Type="Microsoft.OSDRefresh.PrestageDriveLookupTask" DisplayName="OEMMedia Lookup">
    <Setter Property="BitmapFilename"/>
    -<ExitCodes>
    <ExitCode Type="0" Text="Success" Value="0" State="Success"/>
    <ExitCode Type="-1" Text="Error" Value="*" State="Error"/>
    </ExitCodes>
    </Task>
    -<Task Type="Microsoft.OSDRefresh.AppDiscoveryTask" DisplayName="Application Discovery">
    <Setter Property="readcfg">%OSDDataSourceDrive%\%OSDDataSourceDirectory%\AppDiscoveryresult.xml.app</Setter>
    <Setter Property="writecfg">%temp%\AppDiscoveryresult.xml.app</Setter>
    <Setter Property="log">$LogPath$\AppDiscovery.log</Setter>
    <Setter Property="BitmapFilename">images\AppDiscovery.ico</Setter>
    -<ExitCodes>
    <ExitCode Type="0" Text="Successfully scanned applications." Value="0" State="Success"/>
    <ExitCode Type="1" Text="Could not run application discovery engine (reason unknown). The appropriate applications may not be selected." Value="*" State="Warning"/>
    <ExitCode Type="0" Text="AppDiscovery exited with success as Application matching information is not available in Windows PE." Value="1" State="Success"/>
    <ExitCode Type="1" Text="Critical problems were encountered while initializing App Discovery. The appropriate applications may not be selected." Value="16777216" State="Warning"/>
    <ExitCode Type="1" Text="Critical problems were encountered while processing the Application Master List. The appropriate applications may not be selected." Value="33554432" State="Warning"/>
    </ExitCodes>
    </Task>
    </Tasks>
    </Page>
    -<Page Name="RebootPage" Type="Microsoft.OSDRefresh.RebootPage" DisplayName="Reboot">
    -<Fields>
    -<Field Name="RebootText" Summary="" Enabled="true">
    <Default> Your machine will now be rebooted. Click on the 'Finish' button to reboot. </Default>
    </Field>
    </Fields>
    </Page>
    -<Page Name="WelcomePageReplace" Type="Microsoft.SharedPages.WelcomePage" DisplayName="Welcome">
    -<Fields>
    -<Field Name="WelcomeText" Summary="" Enabled="true">
    <Default> Welcome to the Replace Wizard. This wizard will walk you through a series of screens that will allow you to customize your data and settings for USMT. After you have entered the information, the wizard will begin USMT. Click on the 'Next' button to start. Please allow 2 hours for USMT. If you need support during this process, please e-mail your system administrator. </Default>
    </Field>
    </Fields>
    </Page>
    -<Page Name="VolumePage" Type="Microsoft.OSDRefresh.VolumePage" DisplayName="Volume">
    -<Fields>
    <Field Name="Image" Summary="Image Selection:" Enabled="true" VarName="OSDImageIndex"/>
    -<Field Name="Volume" Summary="Volume:" Enabled="true">
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">There are no volumes available for installing the OS.</Setter>
    </Validator>
    </Field>
    <Field Name="Directory" Summary="Windows Directory:" Enabled="true"/>
    <Field Name="Format" Summary="Format:" Enabled="true" VarName="OSDDiskPart"/>
    </Fields>
    <Setter Property="MinimumVolumeSize">10</Setter>
    <Setter Property="FormatWinPE">Partition and &format disk 0.</Setter>
    <Setter Property="FormatFullOS">&Clean the selected volume.</Setter>
    <Setter Property="FormatWinPEWarning">WARNING: Choosing this option will repartition and format disk 0!</Setter>
    <Setter Property="FormatFullOSWarning">WARNING: Choosing this option will delete all data on the target volume!</Setter>
    -<Data Name="ImageSelection">
    -<DataItem>
    <Setter Property="DisplayName">Windows 7 RTM (x86)</Setter>
    <Setter Property="Index">1</Setter>
    <Setter Property="Architecture">x86</Setter>
    <Setter Property="ImageName">Windows 7 RTM Images</Setter>
    </DataItem>
    </Data>
    </Page>
    -<Page Name="UserRestorePage" Type="Microsoft.OSDRefresh.UserStatePage" DisplayName="Select Target">
    -<Fields>
    <RadioGroup Name="LocationGroup" Locked="false"/>
    -<Field Name="TargetDrive" Enabled="true" VarName="">
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">No target drive found. Please insert a valid USB drive and click the Refresh button.</Setter>
    </Validator>
    </Field>
    -<Field Name="NetworkLocation" Enabled="true" VarName="SMSConnectNetworkFolderPath">
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">No valid network share.</Setter>
    </Validator>
    </Field>
    -<Field Name="Username" Summary="User:" Enabled="true" VarName="OSDUserStateKey">
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">You have to input user name. Example is domain\user.</Setter>
    </Validator>
    -<Validator Type="Microsoft.Wizard.Validation.RegEx">
    <Setter Property="Message">User name format is invalid. Example is domain\user.</Setter>
    <Setter Property="Pattern">^([A-Za-z0-9-\.]+)\\([^+#,*"<>;=\[\]:?/|']+)$</Setter>
    </Validator>
    </Field>
    -<Field Name="Password" Summary="" Enabled="true" VarName="OSDUserStateKeyPassword">
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">Password is required. Please enter the password.</Setter>
    </Validator>
    </Field>
    <Field Name="NoDataRadio" Enabled="true" VarName=""/>
    <Field Name="LocalRadio" Enabled="true" VarName=""/>
    <Field Name="USBRadio" Enabled="true" VarName=""/>
    <Field Name="NetworkRadio" Enabled="true" VarName=""/>
    </Fields>
    <Setter Property="NetworkPassword"/>
    <Setter Property="NetworkUsername"/>
    <Setter Property="DataSourceText">Please select a location where user data will be captured and/or restored.</Setter>
    <Setter Property="Format">disable</Setter>
    <Setter Property="FormatPrompt">disable</Setter>
    <Setter Property="MinimumDriveSize">10</Setter>
    <Setter Property="State">Restore</Setter>
    <Setter Property="NetworkDrive">n:</Setter>
    <Data Name="Network"/>
    </Page>
    -<Page Name="ComputerPage" Type="Microsoft.OSDRefresh.ComputerPage" DisplayName="New Computer Details">
    -<Fields>
    -<RadioGroup Name="DomainGroup" Locked="false">
    <Default>Workgroup</Default>
    </RadioGroup>
    -<Field Name="ComputerName" Summary="Computer Name:" Enabled="true" VarName="OSDComputerName">
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">The computer name is required. Please enter a computer name.</Setter>
    </Validator>
    -<Validator Type="Microsoft.Wizard.Validation.RegEx">
    <Setter Property="Message">The computer name is not valid. It either contains a character that isn't allowed, or is longer than 15 characters.</Setter>
    <Setter Property="NamedPattern">ComputerName</Setter>
    </Validator>
    -<Validator Type="Microsoft.Wizard.Validation.InvalidChars">
    <Setter Property="Message">One of the characters in the computer name is not valid.</Setter>
    <Setter Property="InvalidChars"/>
    </Validator>
    </Field>
    -<Field Name="DomainCombo" Enabled="true" VarName="OSDDomainName">
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">You must select a domain.</Setter>
    </Validator>
    </Field>
    <Field Name="DomainOUCombo" Enabled="true" VarName="OSDDomainOUName"/>
    -<Field Name="WorkgroupName" Summary="Workgroup:" Enabled="true" VarName="OSDWorkgroupName">
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">The workgroup name must be between 1 and 15 characters long, and cannot contain any of these characters: " : ; | = + * ? < ></Setter>
    </Validator>
    -<Validator Type="Microsoft.Wizard.Validation.RegEx">
    <Setter Property="Message">The workgroup name must be between 1 and 15 characters long, and cannot contain any of these characters: " : ; | = + * ? < ></Setter>
    <Setter Property="NamedPattern">Workgroup</Setter>
    </Validator>
    </Field>
    -<Field Name="Username" Summary="Join Domain Account:" Enabled="true" VarName="OSDJoinAccount">
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">You have to input user name. Example is domain\user.</Setter>
    </Validator>
    -<Validator Type="Microsoft.Wizard.Validation.RegEx">
    <Setter Property="Message">User name format is invalid. Example is domain\user.</Setter>
    <Setter Property="Pattern">^([A-Za-z0-9-\.]+)\\([^+#,*"<>;=\[\]:?/|']+)$</Setter>
    </Validator>
    </Field>
    -<Field Name="Password" Summary="" Enabled="true" VarName="OSDJoinPassword">
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">Password is required. Please enter the password.</Setter>
    </Validator>
    </Field>
    </Fields>
    <Setter Property="ADCredentialCheck" Type="boolean">true</Setter>
    <Setter Property="ADComputerObjectCheck" Type="boolean">true</Setter>
    <Setter Property="UseExistingComputerName" Type="boolean">false</Setter>
    <Data Name="Domain"/>
    </Page>
    -<Page Name="AdminAccounts" Type="Microsoft.SharedPages.AdminAccountsPage" DisplayName="Administrator Password">
    -<Fields>
    -<Field Name="Username" Summary="Add as Administrator:" Enabled="true" VarName="OSDAddAdmin">
    <Default>%OSDJoinAccount%</Default>
    -<Validator Type="Microsoft.Wizard.Validation.InvalidChars">
    <Setter Property="Message">One of the characters in the Account Name(s) field is not valid.</Setter>
    <Setter Property="InvalidChars">/[]:|=,+*<>?"</Setter>
    </Validator>
    </Field>
    -<Field Name="Password" Summary="" Enabled="true" VarName="OSDLocalAdminPassword">
    <Default/>
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">Password is required. Please enter the password.</Setter>
    </Validator>
    </Field>
    </Fields>
    </Page>
    -<Page Name="UDAPage" Type="Microsoft.OSDRefresh.UDAPage" DisplayName="User Device Affinity">
    -<Fields>
    -<Field Name="DeviceAfinity" Summary="" Enabled="true">
    <Default>false</Default>
    </Field>
    -<Field Name="Username" Summary="User Device Affinity Account:" Enabled="true" VarName="SMSTSUdaUsers">
    <Default>%OSDJoinAccount%</Default>
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">You have to input user name. Example is domain\user.</Setter>
    </Validator>
    -<Validator Type="Microsoft.Wizard.Validation.RegEx">
    <Setter Property="Message">User name format is invalid. Example is domain\user.</Setter>
    <Setter Property="Pattern">^([A-Za-z0-9-]+)\\([^+#,*"<>;=\[\]:?/|']+)$</Setter>
    </Validator>
    </Field>
    <Field Name="Password" Enabled="true"/>
    </Fields>
    </Page>
    -<Page Name="LanguagePage" Type="Microsoft.OSDRefresh.LanguagePage" DisplayName="Language">
    -<Fields>
    -<Field Name="LanguagePack" Summary="Language Pack:" Enabled="true" VarName="UILanguage">
    <Default>DE-DE</Default>
    </Field>
    -<Field Name="InputLocale" Summary="Locale:" Enabled="true" VarName="UserLocale">
    <Default>en-US</Default>
    </Field>
    -<Field Name="KeyboardLocale" Summary="Keyboard Locale:" Enabled="true" VarName="KeyboardLocale">
    <Default>00000409</Default>
    </Field>
    -<Field Name="TimeZone" Summary="Time Zone:" Enabled="true" VarName="OSDTimeZone">
    <Default>Pacific Standard Time</Default>
    </Field>
    </Fields>
    -<Data Name="LanguagePacks">
    -<DataItem>
    <Setter Property="DisplayName">English (United States)</Setter>
    <Setter Property="Language">EN-US</Setter>
    </DataItem>
    -<DataItem>
    <Setter Property="DisplayName">Chinese (Hong Kong S.A.R.)</Setter>
    <Setter Property="Language">ZH-HK</Setter>
    </DataItem>
    -<DataItem>
    <Setter Property="DisplayName">German (Germany)</Setter>
    <Setter Property="Language">DE-DE</Setter>
    </DataItem>
    -<DataItem>
    <Setter Property="DisplayName">Japanese (Japan)</Setter>
    <Setter Property="Language">JA-JP</Setter>
    </DataItem>
    -<DataItem>
    <Setter Property="DisplayName">Polish (Poland)</Setter>
    <Setter Property="Language">PL-PL</Setter>
    </DataItem>
    -<DataItem>
    <Setter Property="DisplayName">Romanian (Romania)</Setter>
    <Setter Property="Language">RO-RO</Setter>
    </DataItem>
    </Data>
    </Page>
    -<Page Name="ApplicationPage" Type="Microsoft.OSDRefresh.ApplicationPage" DisplayName="Install Programs">
    <Setter Property="Link.Uri">%temp%\AppDiscoveryresult.xml.app</Setter>
    <Setter Property="TsAppBaseVariable">PACKAGES</Setter>
    <Setter Property="TsApplicationBaseVariable">APPLICATIONS</Setter>
    <Setter Property="TsWindowsAppPackageAppBaseVariable">WINDOWSAPPPACKAGEAPPS</Setter>
    <Setter Property="TsAppInstall">AppInstall</Setter>
    </Page>
    <Page Name="SummaryPage" Type="Microsoft.Shared.SummaryPage" DisplayName="Summary"/>
    -<Page Name="UserCapturePageOldPC" Type="Microsoft.OSDRefresh.UserStatePage" DisplayName="Select Target">
    -<Fields>
    <RadioGroup Name="LocationGroup" Locked="false"/>
    -<Field Name="TargetDrive" Enabled="true" VarName="">
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">No target drive found. Please insert a valid USB drive and click the Refresh button.</Setter>
    </Validator>
    </Field>
    -<Field Name="NetworkLocation" Enabled="true" VarName="SMSConnectNetworkFolderPath">
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">No valid network share.</Setter>
    </Validator>
    </Field>
    -<Field Name="Username" Summary="User:" Enabled="true" VarName="OSDUserStateKey">
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">You have to input user name. Example is domain\user.</Setter>
    </Validator>
    -<Validator Type="Microsoft.Wizard.Validation.RegEx">
    <Setter Property="Message">User name format is invalid. Example is domain\user.</Setter>
    <Setter Property="Pattern">^([A-Za-z0-9-\.]+)\\([^+#,*"<>;=\[\]:?/|']+)$</Setter>
    </Validator>
    </Field>
    -<Field Name="Password" Summary="" Enabled="true" VarName="OSDUserStateKeyPassword">
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">Password is required. Please enter the password.</Setter>
    </Validator>
    </Field>
    <Field Name="NoDataRadio" Enabled="false" VarName=""/>
    <Field Name="LocalRadio" Enabled="false" VarName=""/>
    <Field Name="USBRadio" Enabled="true" VarName=""/>
    <Field Name="NetworkRadio" Enabled="true" VarName=""/>
    </Fields>
    <Setter Property="NetworkPassword"/>
    <Setter Property="NetworkUsername"/>
    <Setter Property="DataSourceText">Please select a location where user data will be captured.</Setter>
    <Setter Property="Format">disable</Setter>
    <Setter Property="FormatPrompt">disable</Setter>
    <Setter Property="MinimumDriveSize">10</Setter>
    <Setter Property="State">Capture</Setter>
    <Setter Property="NetworkDrive">n:</Setter>
    <Data Name="Network"/>
    </Page>
    -<Page Name="ProgressPage" Type="Microsoft.OSDRefresh.ProgressPage" DisplayName="Capture Data">
    <Setter Property="LogFilename">$LogPath$\USMTcapture.prg</Setter>
    -<Tasks StatusTitle="Status" NameTitle="Task Name">
    -<Task Type="Microsoft.Wizard.CopyFilesTask" DisplayName="Copy AppDiscovery XML">
    <File Dest="$DriveLetter$\%OSDDataSourceDirectory%" Source="%temp%\AppDiscoveryresult.xml.app"/>
    <Setter Property="BitmapFilename">images\copy.bmp</Setter>
    -<ExitCodes>
    <ExitCode Type="0" Text="" Value="0" State="Success"/>
    <ExitCode Type="-1" Text="Copy failed." Value="*" State="Error"/>
    <Error Type="-1" Text="Copy failed. Please check the OSD Wizard log file for details." Value="*" State="Error"/>
    </ExitCodes>
    </Task>
    -<Task Type="Microsoft.Wizard.CopyFilesTask" DisplayName="Copy Printers XML">
    <File Dest="$DriveLetter$\%OSDDataSourceDirectory%" Source="%temp%\PrinterList.xml"/>
    <Setter Property="BitmapFilename">images\Printers.ico</Setter>
    -<ExitCodes>
    <ExitCode Type="0" Text="" Value="0" State="Success"/>
    <ExitCode Type="-1" Text="Copy failed. Please check the OSD Wizard log file for details." Value="*" State="Error"/>
    </ExitCodes>
    </Task>
    -<Task Type="Microsoft.Wizard.CopyFilesTask" DisplayName="Copy ProductsList">
    <File Dest="$DriveLetter$\%OSDDataSourceDirectory%" Source="%temp%\ProductsInstalled.txt"/>
    <Setter Property="BitmapFilename">images\copy.bmp</Setter>
    -<ExitCodes>
    <ExitCode Type="0" Text="" Value="0" State="Success"/>
    <ExitCode Type="-1" Text="Copy failed." Value="*" State="Error"/>
    <Error Type="-1" Text="Copy failed. Please check the OSD Wizard log file for details." Value="*" State="Error"/>
    </ExitCodes>
    </Task>
    -<Task Type="Microsoft.Wizard.ShellExecuteTask" DisplayName="Run USMT">
    <Setter Property="BitmapFilename">images\usmt.bmp</Setter>
    <Setter Property="filename">%windir%\system32\wscript.exe</Setter>
    <Setter Property="parameters">//B %ScriptRoot%\ZTIUserState.wsf /capture /OSDStateStorePath:$DriveLetter$\%OSDDataSourceDirectory% /UserDataKey:%OSDUserStateKeyPassword%</Setter>
    -<ExitCodes>
    <ExitCode Type="0" Text="" Value="0" State="Success"/>
    <ExitCode Type="-1" Text="USMT scan state failed." Value="*" State="Error"/>
    </ExitCodes>
    </Task>
    </Tasks>
    </Page>
    -<Page Name="RebootAfterCapture" Type="Microsoft.OSDRefresh.RebootPage" DisplayName="Reboot">
    -<Fields>
    -<Field Name="RebootText" Summary="" Enabled="true">
    <Default> Your machine will now be rebooted. Click on the 'Finish' button to reboot. </Default>
    </Field>
    </Fields>
    </Page>
    -<Page Name="BitLocker" Type="Microsoft.OSDRefresh.BitLockerPage" DisplayName="BitLocker">
    -<Fields>
    <!-- Valid values: TPM,TPMPIN,TPMKey and ExternalKey-->
    -<RadioGroup Name="BitLockerRadioGroup" Locked="false">
    <Default>TPMPIN</Default>
    </RadioGroup>
    -<RadioGroup Name="LocationGroup" Locked="false">
    <Default>AD</Default>
    </RadioGroup>
    -<Field Name="BitLocker" Summary="" Enabled="true" VarName="BDEInstallSuppress">
    <Default>True</Default>
    </Field>
    -<Field Name="PIN" Summary="" Enabled="true" VarName="BDEPIN">
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">The PIN must not be emtpy</Setter>
    </Validator>
    -<Validator Type="Microsoft.Wizard.Validation.RegEx">
    <Setter Property="Message">PIN should be a number between 4-20 digits</Setter>
    <Setter Property="Pattern">^[0-9-]{4,20}$</Setter>
    </Validator>
    </Field>
    -<Field Name="WaitForEncryption" Summary="" Enabled="true" VarName="OSDBitlockerWaitForEncryption">
    <Default>True</Default>
    </Field>
    </Fields>
    <Setter Property="KeyLocation"/>
    </Page>
    -<Page Name="Build Type" Type="Microsoft.Wizard.CustomPage" DisplayName="Build Type">
    -<Fields>
    -<Field Name="label3" Summary="" Enabled="true" VarName="">
    <Default>Choose Language Type</Default>
    </Field>
    -<RadioGroup Name="Group1" Summary="ABBLan" Enabled="true" VarName="ABBLang" Locked="false">
    <Default>radiobutton1</Default>
    </RadioGroup>
    -<Field Name="combo5" Summary="ABBLang" Enabled="true" VarName="ABBLang">
    <Default>English</Default>
    </Field>
    </Fields>
    -<Data Name="CustomFields">
    -<DataItem>
    <Setter Property="ControlType">label</Setter>
    <Setter Property="ID">3</Setter>
    <Setter Property="X">37.27</Setter>
    <Setter Property="Y">3.67</Setter>
    <Setter Property="Width">100</Setter>
    <Setter Property="Height">12</Setter>
    <Setter Property="Name">label3</Setter>
    <Setter Property="Label">Choose Language Type</Setter>
    </DataItem>
    -<DataItem>
    <Setter Property="ControlType">combo</Setter>
    <Setter Property="ID">5</Setter>
    <Setter Property="X">36.87</Setter>
    <Setter Property="Y">21.25</Setter>
    <Setter Property="Width">100</Setter>
    <Setter Property="Height">12</Setter>
    <Setter Property="Name">combo5</Setter>
    </DataItem>
    </Data>
    -<Data Name="combo5">
    -<DataItem>
    <Setter Property="DisplayName">English</Setter>
    <Setter Property="Value">0</Setter>
    </DataItem>
    -<DataItem>
    <Setter Property="DisplayName">Chinese</Setter>
    <Setter Property="Value">1</Setter>
    </DataItem>
    -<DataItem>
    <Setter Property="DisplayName">Japanese</Setter>
    <Setter Property="Value">2</Setter>
    </DataItem>
    -<DataItem>
    <Setter Property="DisplayName">German</Setter>
    <Setter Property="Value">3</Setter>
    </DataItem>
    -<DataItem>
    <Setter Property="DisplayName">Lang-2</Setter>
    <Setter Property="Value">4</Setter>
    </DataItem>
    -<DataItem>
    <Setter Property="DisplayName">Lang-3</Setter>
    <Setter Property="Value">5</Setter>
    </DataItem>
    -<DataItem>
    <Setter Property="DisplayName">Lang-4</Setter>
    <Setter Property="Value">6</Setter>
    </DataItem>
    -<DataItem>
    <Setter Property="DisplayName">Lang-5</Setter>
    <Setter Property="Value">7</Setter>
    </DataItem>
    -<DataItem>
    <Setter Property="DisplayName">Lang-6</Setter>
    <Setter Property="Value">8</Setter>
    </DataItem>
    -<DataItem>
    <Setter Property="DisplayName">Lang-7</Setter>
    <Setter Property="Value">9</Setter>
    </DataItem>
    </Data>
    </Page>
    </Pages>
    -<StageGroups>
    -<StageGroup DisplayName="New Computer">
    -<Stage Name="NEWCOMPUTER" DisplayName="New Computer">
    <PageRef Page="WelcomePage"/>
    <PageRef Page="LanguagePage"/>
    <PageRef Page="SummaryPage"/>
    </Stage>
    -<Stage Name="NEWCOMPUTER.Prestaged" DisplayName="New Computer (prestaged media)">
    <PageRef Page="WelcomePage"/>
    <PageRef Page="BitLocker"/>
    <PageRef Page="UserRestorePage"/>
    <PageRef Page="ConfigScanBareMetal"/>
    <PageRef Page="ComputerPage"/>
    <PageRef Page="AdminAccounts"/>
    <PageRef Page="UDAPage"/>
    <PageRef Page="LanguagePage"/>
    <PageRef Page="ApplicationPage"/>
    <PageRef Page="SummaryPage"/>
    </Stage>
    </StageGroup>
    -<StageGroup DisplayName="Refresh">
    -<Stage Name="REFRESH" DisplayName="Refresh">
    <PageRef Page="WelcomePage"/>
    <PageRef Page="VolumePage"/>
    <PageRef Page="UserRestorePage"/>
    <PageRef Page="ConfigScanPage"/>
    <PageRef Page="ComputerPage"/>
    <PageRef Page="AdminAccounts"/>
    <PageRef Page="LanguagePage"/>
    <PageRef Page="ApplicationPage"/>
    <PageRef Page="SummaryPage"/>
    </Stage>
    </StageGroup>
    -<StageGroup DisplayName="Replace">
    -<Stage Name="REPLACE" DisplayName="Replace, in full OS">
    <PageRef Page="WelcomePageReplace"/>
    <PageRef Page="ConfigScanPage"/>
    <PageRef Page="RebootPage"/>
    </Stage>
    -<Stage Name="REPLACE.WinPE" DisplayName="Replace, in WinPE">
    <PageRef Page="UserCapturePageOldPC"/>
    <PageRef Page="ProgressPage"/>
    <PageRef Page="RebootAfterCapture"/>
    </Stage>
    </StageGroup>
    </StageGroups>
    </Wizard>

    I don't know much about the UDI but I think the FieldName should be TimeZoneName and not just TimeZone.

  • I can't Start, Uninstall or Install new iTunes. I'm getting the same error message: Window Installer Service could not be accessed.  No other programs have similar problem. Any suggestion what can be done?

    I can't Start, Uninstall of Install new iTunes. I'm getting the same error message: "Window Installer Service could not be accessed". No other programs having similar problem. Any suggestions how to fix it?

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) (not for XP) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

  • Updated itunes, error message about mobile popped up during installation, then after installation, tunes will not start. gives error that a dll file is missing.

    I downloaded the new Itunes version. During installation, there was an error message that said no Mobile access.  After installation, Itunes would not open.  Gave an error message that a DLL file was not found. Removed itunes from computer and initiated new download.  Same problem with new download. Still does not open. I'm stumped.  I have over  30,000 files in itunes and use it every day HELP

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • Windows Server 2012 R2 - ALL HF's Failing to install as "Does Not Apply to this computer"

    Hi,
    A general question about hot fix installs.
    I have multiple servers that are all Windows 2012 R2. They do not have internet connections, so I have to install the Hotfixes manually. I download the HF's from the ISO download page (https://support.microsoft.com/en-us/kb/913086) every month. I collect them and install in a bulk install during a release cycle ( a couple times a year). I just realized that NO HF's have installed since JUNE 2014. Every HF that shows up in WindowsServer2012R2 directory fail to install with a message of "The update is not applicable to your computer". Which is fine if that was true, but.... I get this message for every HF from the ISO's since June 2014. NOT one HF thinks it is applicable to my computer. Could that be the case? No HF's apply to my Server 2012 systems since June of 2014?
    This is my system info, and below that is the results from attempting to install 95 HF's.
    C:\TEMP>systeminfo
    Host Name: MYHOST
    OS Name: Microsoft Windows Server 2012 R2 Datacenter
    OS Version: 6.3.9600 N/A Build 9600
    OS Manufacturer: Microsoft Corporation
    OS Configuration: Member Server
    OS Build Type: Multiprocessor Free
    Registered Owner: Windows User
    Registered Organization:
    Product ID: 00252-80025-36226-AA727
    Original Install Date: 6/13/2014, 8:04:39 AM
    System Boot Time: 3/16/2015, 2:34:45 PM
    System Manufacturer: Dell Inc.
    System Model: PowerEdge R720
    System Type: x64-based PC
    Processor(s): 2 Processor(s) Installed.
    [01]: Intel64 Family 6 Model 62 Stepping 4 GenuineInt
    el ~2500 Mhz
    [02]: Intel64 Family 6 Model 62 Stepping 4 GenuineInt
    el ~2500 Mhz
    BIOS Version: Dell Inc. 2.2.2, 1/16/2014
    Windows Directory: C:\Windows
    System Directory: C:\Windows\system32
    Boot Device: \Device\HarddiskVolume1
    System Locale: en-us;English (United States)
    Input Locale: en-us;English (United States)
    Time Zone: (UTC-07:00) Mountain Time (US & Canada)
    Total Physical Memory: 262,099 MB
    Available Physical Memory: 249,337 MB
    Virtual Memory: Max Size: 301,011 MB
    Virtual Memory: Available: 288,015 MB
    Virtual Memory: In Use: 12,996 MB
    Page File Location(s): C:\pagefile.sys
    Domain: mydomain.sgn
    Logon Server: \\MYHOST
    Hotfix(s): 25 Hotfix(s) Installed.
    [01]: KB2862152
    [02]: KB2868626
    [03]: KB2876331
    [04]: KB2888505
    [05]: KB2892074
    [06]: KB2893294
    [07]: KB2893984
    [08]: KB2898785
    [09]: KB2898868
    [10]: KB2898871
    [11]: KB2900986
    [12]: KB2901125
    [13]: KB2901128
    [14]: KB2909210
    [15]: KB2909921
    [16]: KB2912390
    [17]: KB2916036
    [18]: KB2919442
    [19]: KB2922229
    [20]: KB2923392
    [21]: KB2925418
    [22]: KB2930275
    [23]: KB2931358
    [24]: KB2931366
    [25]: KB2936068
    Network Card(s): 6 NIC(s) Installed.
    [01]: Broadcom BCM57800 NetXtreme II 10 GigE (NDIS VB
    D Client)
    Connection Name: ISCSI
    DHCP Enabled: No
    IP address(es)
    [01]: 192.168.1.30
    [02]: fe80::38c9:e59c:5ac2:e0a1
    [02]: Broadcom BCM57800 NetXtreme II 1 GigE (NDIS VBD
    Client)
    Connection Name: NIC3
    Status: Hardware not present
    [03]: Broadcom BCM57800 NetXtreme II 1 GigE (NDIS VBD
    Client)
    Connection Name: MGMT
    DHCP Enabled: No
    IP address(es)
    [01]: 7.48.64.32
    [02]: 7.48.64.30
    [03]: fe80::f14e:9339:9326:c7fd
    [04]: Broadcom BCM57810 NetXtreme II 10 GigE (NDIS VB
    D Client)
    Connection Name: SLOT 5 Port 1_swport_VMRepwan
    DHCP Enabled: Yes
    DHCP Server: N/A
    IP address(es)
    [05]: Broadcom BCM57800 NetXtreme II 10 GigE (NDIS VB
    D Client)
    Connection Name: NIC2
    Status: Hardware not present
    [06]: Broadcom BCM57810 NetXtreme II 10 GigE (NDIS VB
    D Client)
    Connection Name: SLOT 5 Port 2_swport_VMOpswan
    DHCP Enabled: Yes
    DHCP Server: N/A
    IP address(es)
    Hyper-V Requirements: A hypervisor has been detected. Features required for
    Hyper-V will not be displayed.
    I have a script that runs each HF install.. If I run them manually without the tool I get the same results so it is not the script..
    Installing 95 patches
    for Microsoft Windows Server 2012 R2 Datacenter x64
    Repository path: U:\Patch Repository_4_1\2012_R2_HFs\
    1. Windows8.1-KB2894852-v2-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    2. Windows8.1-KB2894856-v2-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    3. Windows8.1-KB2920189-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    4. Windows8.1-KB2926765-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    5. Windows8.1-KB2928120-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    6. Windows8.1-KB2931358-x64.msu patch status: ALREADY INSTALLED - SKIPPING
    7. Windows8.1-KB2931366-x64.msu patch status: ALREADY INSTALLED - SKIPPING
    8. Windows8.1-KB2933826-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    9. Windows8.1-KB2939576-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    10. Windows8.1-KB2953522-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    11. Windows8.1-KB2957151-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    12. Windows8.1-KB2957189-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    13. Windows8.1-KB2957689-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    14. Windows8.1-KB2961072-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    15. Windows8.1-KB2961887-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    16. Windows8.1-KB2962872-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    17. Windows8.1-KB2964718-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    18. Windows8.1-KB2964736-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    19. Windows8.1-KB2965788-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    20. Windows8.1-KB2966072-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    21. Windows8.1-KB2966826-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    22. Windows8.1-KB2966828-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    23. Windows8.1-KB2971850-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    24. Windows8.1-KB2972213-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    25. Windows8.1-KB2972280-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    26. Windows8.1-KB2973114-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    27. Windows8.1-KB2973201-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    28. Windows8.1-KB2973351-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    29. Windows8.1-KB2974008-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    30. Windows8.1-KB2976627-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    31. Windows8.1-KB2976897-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    32. Windows8.1-KB2977292-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    33. Windows8.1-KB2977629-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    34. Windows8.1-KB2978668-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    35. Windows8.1-KB2982794-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    36. Windows8.1-KB2982998-v2-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    37. Windows8.1-KB2987107-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    38. Windows8.1-KB2987114-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    39. Windows8.1-KB2988948-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    40. Windows8.1-KB2992611-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    41. Windows8.1-KB2993651-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    42. Windows8.1-KB2993958-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    43. Windows8.1-KB3000061-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    44. Windows8.1-KB3000483-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    45. Windows8.1-KB3000869-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    46. Windows8.1-KB3001237-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    47. Windows8.1-KB3002657-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    48. Windows8.1-KB3002885-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    49. Windows8.1-KB3003057-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    50. Windows8.1-KB3003381-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    51. Windows8.1-KB3003743-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    52. Windows8.1-KB3004150-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    53. Windows8.1-KB3004361-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    54. Windows8.1-KB3004365-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    55. Windows8.1-KB3005607-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    56. Windows8.1-KB3006226-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    57. Windows8.1-KB3008923-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    58. Windows8.1-KB3008925-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    59. Windows8.1-KB3010788-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    60. Windows8.1-KB3011780-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    61. Windows8.1-KB3013126-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    62. Windows8.1-KB3013455-v2-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    63. Windows8.1-KB3014029-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    64. Windows8.1-KB3018943-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    65. Windows8.1-KB3019215-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    66. Windows8.1-KB3019978-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    67. Windows8.1-KB3020393-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    68. Windows8.1-KB3021674-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    69. Windows8.1-KB3021952-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    70. Windows8.1-KB3023607-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    71. Windows8.1-KB3036197-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    72. Windows8.1-KB3021953-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    73. Windows8.1-KB3022777-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    74. Windows8.1-KB3023266-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    75. Windows8.1-KB3023562-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    76. Windows8.1-KB3024663-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    77. Windows8.1-KB3029944-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    78. Windows8.1-KB3030377-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    79. Windows8.1-KB3031432-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    80. Windows8.1-KB3032323-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    81. Windows8.1-KB3032359-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    82. Windows8.1-KB3040335-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    83. Windows8.1-KB3033408-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    84. Windows8.1-KB3033889-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    85. Windows8.1-KB3034196-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    86. Windows8.1-KB3034344-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    87. Windows8.1-KB3035017-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    88. Windows8.1-KB3035034-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    89. Windows8.1-KB3035126-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    90. Windows8.1-KB3035131-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    91. Windows8.1-KB3035132-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    92. Windows8.1-KB3037634-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    93. Windows8.1-KB3039066-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    94. Windows8.1-KB3044132-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    95. Windows8.1-KB3046049-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
    Thanks,
    Dave
    

    Hi Dave,
    Would you please check CBS lg file and other relevant event logs if find more clues? On current situation, please refer to following article and check if can help you.
    Update is not applicable to your computer- but it is
    Best regards,
    Justin Gu
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Not applied Patch 5117016 after 10.2.0.2 patch set.

    Hi ,
    database has been upgraded to 10gR2 on solaris 64bit. Patch 5117016 has not been applied after 10.2.0.2 patch set applied. but after that DST patches were applied. here my concern is should i rollback DST patches in order to apply Patch 5117016. as per metalink note:394933.1
    please advise me.
    thanks in advance,
    Hussain.

    Hi,
    I have got problem when I was installing 10.2.0.3.0 Patch Set after succeed installation of Oracle 10.2.0.1 on Windows server 2003.
    Server was shut down by a coworker middle of installation of 10.2.0.3.0 Patch Set resulting that Patch 5556081 : was not applied ( see below opatch_history.txt ) .
    When I try to apply 10.2.0.3.0 again it fails saying that Patch Set is already installed.
    When I run OUI to see what has been installed I see only Interim Patch #5557962.
    I didn't create any database between the installations.
    So I can't apply OpachSet README.html advice .
    Uninstall PathSet :
    C:\> sqlplus /NOLOG
    SQL> CONNECT SYS/SYS_Password AS SYSDBA
    SQL> SHUTDOWN IMMEDIATE
    SQL> EXIT
    Should I try to Create a Database and after that apply OpachSet README.html advice
    C:\oracle\product\10.2.0\db_1\cfgtoollogs\opatch\opatch_history.txt
    Date & Time : Fri Aug 31 10:56:03 CEST 2007
    Oracle Home : C:\oracle\product\10.2.0\db_1
    OPatch Ver. : 10.2.0.3.0
    Current Dir : C:\oracle\product\10.2.0\db_1\sysman\patches
    Command : apply -silent -local -oh C:\oracle\product\10.2.0\db_1 C:\oracle\product\10.2.0\db_1/sysman/patches/5557962
    Log File : C:\oracle\product\10.2.0\db_1\cfgtoollogs\opatch\opatch2007-08-31_10-56-03AM.log
    /regards

Maybe you are looking for

  • Message Mapping, filling field with 0 (zeros) on left

    I need to fill a field with values that has variable lenght adding 0 (zeros) on the left, how can I do it ? I'm using the LENGHT in message mapping, with value returned by LENGHT I use FIXVALUES to map the quantity of 0 (zeros) that I need to add in

  • My off switch is not working

    My off switch is not working on my iphone 5

  • How to convert a data set into a xml data and vice versa

    i am new to oracle with xml.. my aim is to convert a data set into a xml data and vice versa.. my work is as follows... my query: select rggpk,rggcode,rggname from ms_regiongeo to convert a data set into a xml* select XMLType(trim(replace(dbms_xmlgen

  • Problemi con l'autorizzazione del pc in itunes

    Buongiorno, ho dovuto reinstallare windows sul pc e adesso mi ritrovo a dover riautorizzare questo computer in itunes. Non mi è permesso perchè ho già 5 computer autorizzati, benchè ne abbia solo 3 (ho reinstallato windows 2 volte). Come posso risolv

  • How to revert edited info for a purchased song to the original info it came with?

    I had purchased some songs from the iTunes Store and downloaded them to the computer, where I then edited their song info/metadata (e.g., artist name, composer, etc.). I now want to revert the song info/metadata to whatever they were before the editi