Rapid Installer

EP folks,
We have EP 6.0 SP3 and we would like to try the mighty Rapid Installer. As far as I know, what is available is Rapid Installer 1.0 (delivered on DVD, when ordered through local SAP rep). I've understood that Rapid Installer 2.0 will be available some time early '05.
My question is, if I can use Rapid Installer 1.0 to install my EP 6.0 SP3 (or later). I think I've seen an (old?) slide, where Rapid Installer was referring to EP 6.0 SP2, but my goal is SP3 (or later).
Appreciate Your suggestions,
<kimmo/>

Hi Kimmo,
I have used RI 2.1 to install the Portal 6.0 SP 10 without anu problems, last week.  The DVD for the Rapid Installer can be ordered directly from the marketplace.  It includes RI 2.0 and 2.1
Greetings,
Frank

Similar Messages

  • Error in ERP 6.0 Rapid Installer - "brconnect.exe - Entry Point Not Found"

    Hi
    I have the installer for ERP 6.0 + NW 7.0, but option "SAP System" was missing in installation menu.
    Then I downloaded ERP 6.0 (Rapid Installer, Oracle) from market place
    Followed the following steps
        - Install Oracle 10.2.0.1.0
        - Install downloaded ERP 6.0 (Rapid Installer)
        - But this stopped with an error
            brconnect.exe - Entry Point Not Found
                The procedure entry point longjmp could not be located in the dynamic link library orauts.dll.
    orauts.dll is oracle' client dll
    When I checked BRTool' version using command
        *************************************************************************************************************************C:\Documents and Settings\Administrator.CING4468>brtools -V
    BR0651I BRTOOLS 7.00 (6)
    Patch   Date     Info
    release note               849483
    kernel release             700
    patch date                 2005-08-31
    patch level                6
    make platform              NTintel
    make mode                  OCI_10103_SHARE
    make date                  Sep 19 2005
    Here make mode is "OCI_10103_SHARE"
    Rapid installer guide as well as documentation shows that this setup supports Oracle 10.2 but BRTools version shows compatibility with 10.1.
    Is it error because of database version mismatch?
    Thanks !
    Ruhi Hira

    Check for the ora<sid> group and also check the env variable for ora<sid>. This should solve the issue.

  • Can Rapid Installer be used in a Windows AMD X64 Environment?

    Can Rapid Installer be used in a Windows AMD X64 environment to install 64-bit versions of EP 7.0/ESS/MSS, SAP Java AS, and MS SQL 2005; and if not, does Rapid Installer 32-bit have to be executed remotely from a 32-bit system?

    Please check this link.
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/503f02a7-1244-2a10-afa2-af1e8e5e4773

  • TREX problem: Rapid Installer 2.0

    First I try to install EP 6.0 SR1 with Rapid Installer 2.0, I got an trex error in the installation. In this forum (read by Nicky Gromeleit) I got the information that installing TREX in rapid installation is not possible so I try again the following steps:
    1) Install only EP platform succesfully
    2) Install TREX manually succesfully
    3) I have configured IIS 6.0 for TREX
    4) After entering the name server adress in the SAP J2EE Engine Adminisatrator Tool I got only com.sapportals.wdf.WdfErrors in the TREX monitor, although the adress and port is correct. I use the url which you can see in "settings/ Landscape Overview" after starting trexgui.exe.
    Did I forget something or must I change something else?
    Regards,
    Frank

    Hi Frank,
    I had the same problem in the rapidinstallation, but the installation of Trex manualy works fine. I used the port, witch you can find opening 'Drive:\usr\sap\TREX_<Instance>\sapprofile.ini' at line 'TREX/NameServer/Port'
    In the Visual Administrator "-> Server 0 -> Services -> TREX Service" I changed the
    Parameter 'nameserver.address' in my case to 'tcpip://localhost:port'
    Nothing else is to do. So I did nearly the same as you, but maybe the port differs.
    Greetings,
    Axel

  • Installed Netweaver 2004s with Rapid Installer , can not connet to BI7.0!!!

    Hi,
    I installed Netweaver 2004s with rapid installer but i can not connect to BI7.0 with SapLogon 710. SapLogon waiting for response forever. What are the post actions after I installed the Netweaver 2004s. I can connect to portal by IE.
    I am new to this so any help will be greatly appreciated.
    thanks,
    Jenni

    OS is Windows Server. SAPID is IKI. I am the only one trying to connect to BI so DPMON is not the issue. I wanted to stop and start the SAPIKI_03 service but I can not stop it, maybe it is related to that.
    What are the post steps after installing rapid installer?
    How can I make sure that I installed Java+Abap stack or only Java?
    Thank you for your help.
    jenn

  • Error when Installing NW04 using Rapid Installer:FJS-00003  ReferenceError

    Hi friends,
    As a part of Portal migration, i am installing NW04 using Rapid Installer 2.5.1 for SunOS.
    Installation went fine till phase "Database Oracle Patch" but in "Oracle Sidadm Env" phase, an error occured.
    Acc. to sapinst.log file:
    FJS-00003  ReferenceError: mgt is not defined (in script InstallationScript_10, line 12689: ???)
    I searched in SDN and found SAP Note 785921 and 668604. Both are asking us to do the same thing i.e.
    After the following line in control.xml
    "OraJ2ee.prototype.CreateProfilesFromTemplate = function() { "
    insert the line
    var mgt = new FileMgt();
    I did the same but no luck. I stopped the installation and again started it to see if it works but again the same thing.
    Can some one just tell me how to get rid off it?
    Regards,
    Nilz

    Hi Asshish,
    After installing the oracle database did you check whether JDK version is correct in the environment variables before installing the rapid installer.
    What happens is that oracle resets the JDK version to lower version, which is not acceptable to portal. So after installing the oracle verify the version of JDK in the Environment variables and the JAVA_HOME variable.
    Then you try to install the RI 2.5.1
    Regards
    Arun

  • System Copy and Rapid Installer

    Hi,
    We have installed EP6.0 SPS13 using Rapid installer 2.5 and now we want to 'system-copy' this.  The system copy installation guide talks about getting the required DVDs ready. There is only two DVDs in RI2.5. Is it possible to system - copy a RI installation?
    Thanks
    Raj Balakrishnan

    Hi Raj,
    interesting question. In fact, the RI base /is/ a system copy itself. Anyhow, I would expect this to work, too.
    Have you just tried it meanwhile? Any results?
    Best regards
    Detlev

  • Rapid Installer CD label SAP:RAPID_J2ee-cd:700:j2ee-cd:J2EE-CD:*

    I have downloaded package 51033323 SAP Rapid Installer NW 7.0 SPS14 1 to 8 and ran into the error message particularly the error message showed--Install is looking for the package with CD label SAP:RAPID_J2ee-cd:700:j2ee-cd:J2EE-CD:*.  Is this CD label bundled with the download?
    Documentation indiactes that SAP Netweaver 7.0 Rapid Installer for SPS14 is two DVD's.  The second DVD has ( Java Load with app. 4GB)  What are the equivalent package numbers that should be downloaded.
    Thanks.

    Hi Rashmi, I am having the same problem, did you find a answer for your question?

  • Rapid Installer - MS SQL server requirements

    I am wanting to install the SAP Netweaver 2.1 Rapid Installer package.  It states that it requires MS SQL Server Enterprise edition.  Can the Rapid Installer be installed with MS SQL server standard edition instead of Enterprise edition?
    Best regards,
    Russ Cook
    Gardner Denver

    hi david, i'm trying to install Rapid Installer 2.1 on my PC and during installation i got this error message:
    ERROR 2005-09-12 16:28:18
    MDB-05508  Errors were found when checking connection to or configuration of database server (listed above in the log file).
    is it possible that this occurs 'cause my DB is MS SQL SERVER 2000 and not Enterprise edition ? consider that this version of DB was included in RI pack installation
    thanks in advance,
    frank.

  • Rapid Installer includes Visual Composer?

    Hi all,
    I want to install and run NetWeaver Portal. It is planned to be connected to SAP BI. In a later step, it should be possible to create applications/models via the Visual Composer.
    Now my question: Could anybody say something about their experience with the Rapid Installer and if it's recommendable for purpose at all? I'm afraid that VC is not part of the Rapid Installer, am I right? If so, is it difficult to implement it later on?
    Thanks for your posts!
    Best regards,
    Tobi

    Hello Tobias,
    If you want to use the Rapid Installer (RA) for NetWeaver 2004s, the answer is YES the VC is included
    For previous version is not included and you must install your portal with the RA and afterwards install the Visual Composer.
    I hope this clarify your doubts.
    Kindest Regards,
    Luis

  • Rapid Installer ESS / MSS

    We installed Portal using Rapid Installer. SAP Netweaver 2004s EP 7 SP11 with ESS MSS Scenario. I do not know what version of ESS MSS version it is. I am expecting it to be ESS MSS 1.0.
    Now with respect to SCAs for the code when I navigate the CMS screens I see ESS MSS 700. But when I try to download SCA's the latest release I see is ESS MSS 600. Any body know about the actual version of SCA's that I should be using keeping in mind of the Rapid Installer.
    Any help appreciated.

    Thanks for confirning chitti. I also felt the same.
    1- Does this include backend(SAP r/3)configuration as well?
    2. in addition to basic ESS and MSS like pers data,address, family details, bank ...they want benefit module to include as well.
        which will be the best approach (ABAP-webdynpro / Java Webdynpro).

  • Rapid Installer Insallation Error  "password wrong"

    Hi I am doing a "rapid" installation and I have and error "FSL-01002 Unable to create account SAPSERVICEJ2E", I have solved creating manually the user.
    I have set to the user the same password that I specified in the intallation, now I have the following error:
    "CJS-20004 Invalid password. IDAGNOSIS: The password you specified for user 'SAPSERVICEJ2E' is wrong. SOLUTION: Enter the correct password"
    My questions:
    1.->  have I to reset the installation ?
    2.-> Which password is ok, Have I to set the password to the user manually and then begin the installation again?
    3.-> I have set that is about sytem policy, Someone know which policy?
    Thanks in advanced.

    Hi, thanks for the information but I have that guide.
    I have solved the problem I have created manually the user and I have reintalled.
    But now I have another one; I am installing on Primary controller on Windows 2003, the error is:
    INFO 2006-03-02 17:37:56
    Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'OPTIMA\j2eadm' on host '.'.
    INFO 2006-03-02 17:37:56
    Switched to user: j2eadm.
    FSL-00001  System call failed. Error 1332 (No mapping between account names and security IDs was done. ) in execution of system call 'LookupAccountName' with parameter (NULL, server\SAP_LocalAdmin, ...), line (305) in file (synxcaccmg.cpp).
    ERROR 2006-03-02 17:37:56
    FSH-00008  A system error occurred when executing function LookupAccountName. ErrorNo=1332
    it seems that is calling to "lookupaccountname" with "server\user" and I think that the correct way is "domain\user". My domain is named OPTIMA and the machine SERVER.
    Thanks in advanced.

  • Nw2004s Rapid installer problem

    I am attempting my first portal installation.
    I am using the 2004s Rapid installer for MS-SQL Server.  My installation is erroring out in the Import Java Dump step.  The error says to look in the jload.log and jload.java.log files.
    This is the error I see in both log files.
    SEVERE: java.util.zip.ZipException: invalid literal/length code
         at java.util.zip.InflaterInputStream.read(InflaterInputStream.java:140)
         at java.util.zip.GZIPInputStream.read(GZIPInputStream.java:87)
         at com.sap.inst.jload.io.ChoppedInputStream.read(ChoppedInputStream.java:130)
         at java.io.BufferedInputStream.read1(BufferedInputStream.java:220)
         at java.io.BufferedInputStream.read(BufferedInputStream.java:280)
         at java.io.DataInputStream.read(DataInputStream.java:170)
         at com.sap.inst.jload.db.BlobHandler.setValue(BitHandler.java:147)
         at com.sap.inst.jload.db.DBTable.load(DBTable.java:274)
         at com.sap.inst.jload.Jload.dbImport(Jload.java:323)
         at com.sap.inst.jload.Jload.executeJob(Jload.java:397)
         at com.sap.inst.jload.Jload.main(Jload.java:621)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
    I am not sure where to begin debugging this problem.  Any suggestions?
    Thanks,
    Steve

    First thing I would check is that you have full permissions on the directories you are installing into and reading from.
    Mike

  • Rapid Installer for ABAP stack

    Hi,
    Can anyone help me find the links to download of Rapid Installer for ABAP stack?
    I have downloaded NW Rapid Installer 2.5 but apparently that is just Web AS Java. That's what I could conclude from the documentation that was downloaded with Rapid Installer 2.5. I might be wrong as I am a newbie.
    Thanks in advance.

    Rapid installer is only for stand alone Java stack.
    - Digesh Joshi

  • Rapid Installer 2004s EP or NW

    HI,
    I want to order Rapid Installer 2004s for EP, but when I go into the Software Catalog I see that there are 2 versions EP & NW!
    Could someone please tell me the difference between them
    Thank you in advance

    Hi,
    Go through the contents under the caption 'Versions' in the following doc,
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/503f02a7-1244-2a10-afa2-af1e8e5e4773
    Hope this helps !
    Regards
    Srinivasan T

Maybe you are looking for