Rapid Mart for SAP 4.6b

Hi,
Can anyone tell me if there is Rapid Marts support for 4.6b?
Thanks

Hi,
I believe that SAP rapid marts are supported for SAP R/3 and ERP release 4.6c, 5.0, and 6.0.
Regards,
Stratos

Similar Messages

  • Rapid Mart for SAP - Sales / List of source tables

    Hi,
    a customer would like to have a list of the source tables that are read by
    the Rapid Mart for SAP - sales (SA).
    Has anybody such a list. I can only find information about the target tables.
    Regards,
        Martin

    Before I say this, if a customer wants to know the sourcing, that is intellectual property.  If they own the Rapid Mart, then they have rights to the sourcing information.  I never just give this information away since it's proprietary, and can be used without a software purchase to assist a prospect.
    One approach I use is to install the Rapid Mart into an empty repository, then you can open the source SAP DataStore, and that will be all the source tables references.  This will give you the comprehensive list, but as Werner suggested, you need to open each DataFlow and determine it's source table(s) and lookup table(s) to refine your search.
    Edited by: Robert Spurlin on May 14, 2009 3:59 PM

  • G/L Rapid Mart For SAP Availability

    Hi Experts,
    Is SAP offering G/L Rapid Mart For SAP, could any one please answer.
    Thanks & Regards
    Ramakrishna Kamurtrhy

    DK
    Check this
    http://help.sap.com/businessobject/product_guides/RMxi32/en/xi3_rm_sap_gl_bg_en.pdf
    Thanks & Regards
    Ramakrishna Kamurthy
    Edited by: Ramakrishna Kamurthy on Feb 25, 2010 2:13 PM

  • Rapid Marts for SAP Solutions

    Hello,
    I need to find some documentation about Rapid Marts on Logistics.
    Do you know where  can download the application?
    Best regards.
    Catarina Lourenç

    hi,
    Please refer below links.
    http://datawarehouse.ittoolbox.com/groups/vendor-selection/dw-select/experience-with-business-objects-rapid-marts-2074047
    http://help.sap.com/businessobject/product_guides/RMxi32/en/xi3_rm_sap_idm_ug_en.pdf
    Regards,
    Vamsee

  • Rapid Mart for GL (General Ledger)

    Hi all,
    We want to know where we can find a Rapid Mart for GL (General Ledger), if it exists. We could not find in the SAP marketplace. Is it under a different name?
    Many thanks!
    Bea

    Hi Beatriz,
    try to look for the Data Services area in BusinessObjects offering.
    Ingo

  • Rapid Mart for Generic Legacy ERP

    Is it possible to engineer any Rapid mart to go against a generic legacy ERP? We have a Prospect who has Masterpack ERP and they wanted to know if they could reverse engineer an existing Rapid Mart to pull information from Masterpack into a datastore using the predefined  schema. OR....Do we have a partner (rapid Decisions) that can do this?
    Thanks

    Hi Dirk,
    https://websmp108.sap-ag.de/~form/handler?_APP=00200682500000001943&_EVENT=DISPHIER&HEADER=N&FUNCTIONBAR=N&EVENT=TREE&TMPL=INTRO_SWDC_IU_PSP&V=INST&TA=ACTUAL
    I got them from the above link.

  • Rapid marts for BOBJ

    Has anyone used either of these rapid marts? Purchasing/Supply Chain and Project Systems? How well do rapid marts work in general with BOBJ? Thanks!

    hi,
    Please refer below links.
    http://datawarehouse.ittoolbox.com/groups/vendor-selection/dw-select/experience-with-business-objects-rapid-marts-2074047
    http://help.sap.com/businessobject/product_guides/RMxi32/en/xi3_rm_sap_idm_ug_en.pdf
    Regards,
    Vamsee

  • OBIEE VS BO RAPID MARTS FOR FINANCIAL

    Can some one explain me or brief me like what are pros and cons with OBIEE and BO Rapidmarts. This will be a real helpful to me

    https://wiki.sdn.sap.com/wiki/display/BOBJ/RapidMarts

  • Documentation for Business Content Rapid Marts Reports for SAP R/3

    Hi,
    As we have technical documentation for SAP BI business content BI reports on SAP HELP Portal,
    is there any link where we can find the technical documentation for business content reports supported by SAP BOBJ Rapid marts for R/3 solution like for HR module.
    I would like to know what kind of reports are available as a part of rapid mart business content and what are the measures ( key figures ), dimensions ( characteristics ) supported by each of these standard business content rapid mart reports.
    I have referred business guide and user guide for HR rapid marts but they just give an overview of what analysis can be done.But there is no technical documentation for each of the possible rapid mart reports.
    Thanks,
    Tarun Brijwani.
    Edited by: Tarun Brijwani on Feb 10, 2011 4:00 PM

    Tarun,
    Please share if you got some help on your post.

  • Rapid Marts Packages for SAP

    Hi all,
    where can i get Rapid Marts Packages for SAP ? externally stored some where?

    Tarun,
    Please share if you got some help on your post.

  • Combining SAP Rapid Marts

    Is there detailed documentation or best practice guidleines on combing/merging SAP Rapid Marts?
    Along the line of...
    -Pros/cons of doing such?
    -Does it make sense for some to be combined, not all?
    -Master Universe approach or keep to the individual Universes (sounds like a multiplier of maintenance overhead)
    Thanks in advance.

    Just caught the part where the target schema for SAP RMs includes all tables for all RMs so the target schema script is only run once.
    So I guess it is just a matter of building out a custom Universe if there are needs accross the different areas

  • Rapid Deployment Solution for SAP CRM - Landscape

    Hi
    For the first time we have applied the Rapid Deployment Solution for SAP CRM ITSDO into our new DEV system.  The activation of this RDS creates 2 transports  (one WORKBENCH, one CUSTOMIZING)
    I now need to apply the RDS to our QA and PRD systems - is it enough to just transport the 2 transports or do I need to do the entire activation again in both QA and PRD systems?
    I would really appreciate any assistance here.
    Thanks

    Hi Leigh,
    Just wondering how you got on with those transports.. Was it sufficient for you to release the Solution Builder transports to target system or did you need to carry out manual activities in the target system?
    Also, What did you do with regard to activating the reporting client in the target system? did the transport take care of everyting?
    Any assistance would be greatly appreciated.

  • Accounts Payable Rapid Mart Performance Issue

    We are currently running the SAP AP Rapid Mart 3.2 and facing a performance issue on the SAP side for the data flows: DF_VendFinDocFactOpenDelta_SAP and DF_VendFinDocFactClearDelta_SAP.  These data flows pull from the same tables and one of them being BSEG which is a rather large table.
    Has anyone found a means to pull data for these two dataflows within a reasonable amount of time?  I'm looking for a two hour or better abap run time for five years worth of data.

    Hi Chuck,
    I wish I could say that I have a solution. I ran nto the exact same problem a few months ago. Unfortunately we did not have enough time to come to a resolution of the issue, and then I moved on.
    I would also love to hear anyone's suggestions regarding this issue.
    BSEG is not a real table but a "virtual" table (like a view), so there are issues with how DI is able to pull data from BSEG.
    Thanks

  • Issues while executing Jobs - Rapid Mart Accounts Payable

    Hello,
    We are implementing A/c Payable  rapid marts at customer location.
    We installed dataservices and above it installed RM AP XI3.0.
    We successfully configured  source and target DS.
    When we validated the Jobs ,
    we faced the following error :
    [Query:SetLoadDateTime]
    Invalid mapping expression for column <SetLoadDateTime.EXCHANGE_TYPE_ID>. Additional information: <Cannot parse expression.
    Column <EXCHANGE_TYPE_ID> was not found in table <Effective_Date_1>. Please check the spelling of the referenced column and ensure such a column exists in the table.. (BODI-1112351)>. (BODI-1111081)
    [Query:SetLoadDateTime]
    Invalid mapping expression for column <SetLoadDateTime.FROM_CURRENCY_ID>. Additional information: <Cannot parse expression.
    Column <FROM_CURRENCY_ID> was not found in table <Effective_Date_1>. Please check the spelling of the referenced column and ensure such a column exists in the table.. (BODI-1112351)>. (BODI-1111081)
    [Query:SetLoadDateTime]
    Invalid mapping expression for column <SetLoadDateTime.TO_CURRENCY_ID>. Additional information: <Cannot parse expression.
    Column <TO_CURRENCY_ID> was not found in table <Effective_Date_1>. Please check the spelling of the referenced column and ensure such a column exists in the table.. (BODI-1112351)>. (BODI-1111081)
    and some more errors with same query SetLoadDateTime.
    We uploaded the file "fiscal_dates.dat"  in the SAP server "
    JUB02SAPJRD\BO_SHARE" ( which is used in DS setting )
    as mentioned in the Installation log.
    Would really appreciate any pointers wrt this issue.
    Thanks and regards,
    Vinay

    1. Can you check whether the System User ID with which Data Services try to fetch the auxillay files placed folder?
    2. How did you test the configurations? Have test run any job to test all the connectitivities required?

  • IDOC types required for SAP FI

    Hi All,
    How to find the various IDOC types/messages types available for total SAP FI module.My client wants to generate interfaces to get the data from legacy into SAP and from SAP to legacy.I think Client provides only description of the interface like Vendor Account posting and Customer payment so I want all the IDOC types/Message types that are related to SAP FI.
    I have the below interfaces :
    Accounts Posting : (AP)
    1)Vendor Mastre update - FK01
    2)AP open items to be Paid - FB60 - VENDOR INVOICES
    3)Open Items that were Paid in SAP - VENDOR PAYMENTS
    4)Postive Pay EDI feed - > EDI - Bank Payments to Vendor for a Company Code
    5)AP Rapid Mart 
    6)Positive Pay Feedback file -> EDI - Bank Statement for Payment to Vendors for Company Code
    Accounts Receivable : (AR)
    1)Customer Master Update - XD01
    2)Sales Invoice Batch  - Sales Invoices - FB70
    3)Credit, Debit & Adjustments, Receipts -> AR Debit / Credit Memo - FB70
    4)Dunning Letters feed -> AR Dunning Letters FOR A Company Code
    5)Customer Statements -> AR Customer Statements - FOR A CompaNY CODE
    6)lock BOX PAYMENTS ->EDI - AR Customer Lock Box payments
    7)Quarterly Charge Off  -> AR Credit Memos - FB70
    GENERAL LEDGER : (GL)
    1)TZG Journal Entries (GL XFR) -> GL entries - FB50
    2)Hyperion feed -> GL Balances to Hyperion 
    3)ADP Payroll feed -> GL Transactions - FB50 - ADP -> SAP feed
    4)PowerTrack freight expense -> EDI - GL enries - FB50
    Please help me out and your help will be appreciated.
    Thanks,
    Ramesh.

    Hope this helps:
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/db/8d6b46163f11d2893a0000e8216438/frameset.htm
    http://www.erpgenie.com/sapedi/message_types.htm
    http://www.erpgenie.com/sapedi/message_types_bp_ac.htm
    http://www.erpgenie.com/sapedi/message_types_bp_lo.htm
    Regards,
    David

Maybe you are looking for

  • Query help in select Distinct on one column.

    CREATE GLOBAL TEMPORARY TABLE Table1 ( ID1 varchar2(100) , Name1 varchar2(100), Name11 varchar2(100) insert into Table1 values ('a','n1','h3'); insert into Table1 values('b','n2','h2'); insert into Table1 values('a','n3','h1'); insert into Table1 val

  • Flash Player will NOT load

    I recently insatlled IE11.  Since that installation I am asked to update Flash Player but it will NOT install.  It gets part way, stops and says to retry.  When I do so the same thing happens.  HELP!

  • Push SAP passwords to all child systems

    Hi, I use IDM 8.0 to connect a CUA. Has anybody been able to push IDM password to CUA and all child systems (ECC, BI, SAP Portal, Solution Manager...) ? I can only change password on the CUA but not on the child systems the users have access to. When

  • I cannot download new firefox versions. I keep getting the message that I don't have permisson.

    The box that pops up says that I don't have the permission to use all the features of this program. When I click on Current User the box disappears and nothing happens...no download.

  • Pink/purple box when I try to load webpage

    Starting yesterday, anytime I try to load a webpage, I get a pink/purple box on the tab and the page doesn't load at all. In some cases, the page will load and in places where there should have been a picture, there's a box with a yellow background a