Rapidclone - How to find the source?

Hi Experts,
In R12.1.3, is there a way to find out the source of the clone?
I mean any IP addressof the source server or DBID or DBName of the source database.
Expectign your help to resolve this.
Thanks
Sony

If the files/tables of the source instance were not cleaned after the clone then you can find out.
For example, look for <CONTEXT_NAME> under:
$APPL_TOP/*.env files
$TNS_ADMIN
$APPLCSF/$APPLLOG or $APPLCSF/$APPLOUT
Or, FND_CONCURRENT_REQUESTS
Or, startup/shutdown and CM/WF log files
..etc
Thanks,
Hussein

Similar Messages

How to find the Source Table in one corresponding schema?

Hi All,
How to find the Source Table in one corresponding schema?
regards,
DB

DB wrote:
Hi All,
How to find the Source Table in one corresponding schema?
regards,
DBHUH?
I do not understand your question
How do I ask a question on the forums?
SQL and PL/SQL FAQ

How to find the source and target systems of an imported Transport Request?

Hello,
How to find the source and target systems of an imported Transport Request?
chinna.

Hi Chinna,
In your landscape the TMS must have configured.Let assume that you have four six systems in the land scape.
DEV->DEV1->QUA->PRD and other two systems (TR1 ,TR2)are at different domain amd both are connected to QUA and the requests are forwarded from there.Here normally the flow willl be from DEV to DEV1, then DEV1 to QUA and QUA to PRD.For other two systems (TR1 ,TR2 )the source system will always be QUA.
Regards
Ashok

How to find the Source system table

Hi Experts,
How to find table name in SCM APO system, because I am getting error in process chain, the corresponding table in the source system does contain any data. check the data basis in the source system.
Please provide the solutions how to find the table in APO (DP scm bi).
Thanks in advance.
Bye,
Bharathi.

Hi
I guess you knew that in APO, apart from APO tables.. it is Livecache where the actual transaction data is stored.
But, if you just want to find some of the existing table in APO.. simply go to se11 and in the table name put the pattern as /SAPAPO/* and press F4. It will give a list of tables with the descriptions.
You can find out yourself all APO tables application wise with the following steps:
Use transaction SE11 or SE16
- Press F4 in the selection field
- You will get popup... in the below line of the popup selection SAP Applications.
Here you will get the Application list. In that select your own application for which you want to get the table details
e.g. SCM- Supply Chain Management --> SCM-APO --> Advanced Planning and Optimization --->SCM-APO-MD - Master Data --> /SAPAPO/00_PRODUCT
Here are some examples:
/SAPAPO/v_matloc - material, material number location view
/SAPAPO/TSAREAKO - Planning Area details
/SAPAPO/TSAREATE - Planning Area technial fields
Since there are thousands of tables, I cannot list them all here.
or
You can use transaction ST05 (database trace) to help you find the tables you are looking for. You can turn on the trace function, run an APO transaction, and looks at the ST05 logs for the tables

How to find the source code of com.sap.caf.eu.gp.example.tiimeoff.wd.create

Hi Frendz..
I want to know how we can build a callable obj which have a two buttons those r Accept n Reject accordiing to the actions on these buttons flow should forward to next screen(approver ) r sent back to the sender(screen with reject).
I gone thru the Leave process(Time-Off process) which is very suitable for my requirment but in this app there r using predefined CO(com.sap.caf.eu.gp.example.tiimeoff.wd.create).How we see the source code of this predefined CO.
Thanks in Advance
Regards
Rajesh

not answered

How to find the source code of EJB?

I have download the EJB class file on the sun's site,but I wanna download java file of EJB,how to find the java file?

download a decompiler for java ...search in downlaod.com

How to find the source generating DNS Query

Hi team,
we are getting error message for DNS total query
Received/sec is getting more than 250 . can any one help me how i know the source where these query are generated .
DNS Total Query Received/sec is 308.11; >TH = 250
Regards, Triyambak

Note: For this to work correctly you’ll need to run this part of the process from a domain controller. In this example I’m using a 2012 R2 DC but the process should be the same for 2008 and 2008 R2, unfortunately this process doesn’t apply to 2003 DCs, for
sure you can use SPA and get similar information but the good thing is that you’ve got rid of those old 2k3 DCs right?
http://blogs.technet.com/b/askpfeplat/archive/2013/12/16/domain-and-dc-migrations-how-to-monitor-ldap-kerberos-and-ntlm-traffic-to-your-domain-controllers.aspx
You can add the DNS
Regards~Biswajit
Disclaimer: This posting is provided & with no warranties or guarantees and confers no rights.
MCP 2003,MCSA 2003, MCSA:M 2003, CCNA, MCTS, Enterprise Admin
MY BLOG
Domain Controllers inventory-Quest Powershell
Generate Report for Bulk Servers-LastBootUpTime,SerialNumber,InstallDate
Generate a Report for installed Hotfix for Bulk Servers

How to find the source of zfields in ECC where they are extracted to BI ?

Hi,
We have few zfields in BI datasource, and I want to know the source of these zfields in ECC from where the zfields are extracted. Is there any table either in BI or ECC where we can check the source of extraction. Please let me know the way to find the source of the table ?

Hi Daniel,
There is one scenario to know from which tables data is picking for particular data source, which may helps you.
You need to open two ECC sessions.
1. Goto RSA3 T-code (1st session)
2. Goto ST05 T-code (2nd session) which is for trace analysis.
In RSA3 give your data source name and select few records before executing , go to ST05 screen and select the "Table Buffer Trace" checkbox.
And then press "activate trace" button and after that execute your data source in RSA3 screen.
After getting result in RSA3 screen then goto ST05 and select "Deactivate trace" button and then select "Display trace" which will show the trace list from which data is fetching.In this you will be able to see the source tables.
Hope this helps you,
Thanks,
Sai Chand.S

How to find the source for an particular nuget

Simple question.... with a GUI or Package Manager Console, how do I tell where a specific package came from?
Thank Kevin

Hi Kevin,
>>Simple question.... with a GUI or Package Manager Console, how do I tell where a specific package came from?
Since this forum is to discuss the VS IDE usage, for package manager console, maybe you could use the command line "get-help NuGet" to see all available NuGet commands.
For example:
Enter Get-Package -ListAvailable at the prompt to see a list of all packages that are available in the selected package source.
If we do not know the name of the package we want to remove, enter
Get-Package at the prompt without any flags to see a list of all of the packages that are currently installed.
Reference:
https://docs.nuget.org/consume/Package-Manager-Console-PowerShell-Reference
https://docs.nuget.org/consume/package-manager-console
A simliar thread:
http://stackoverflow.com/questions/11867660/list-all-available-versions-of-a-specific-package-in-nuget-package-manager-conso
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to find the source code in the par files for B Package Projects 50.3

Hi,
I want to modify the par files (related to Business Package Projects 50.3) which i imported into Netweavier Developer Studio. I didnt find any jsp files or any java files in it.
If any one worked in this Business Package for Projects 50.3, please give the solution.
Thanks
Ravi

Ravi,
The recommended appraoch for modifying Business Packages is by using NWDI - Netweaver Development Infrastructure.( new name for JDI)
You should be able to make modification, package/build a new version and deploy. The pre-requisite is you need to set up NWDI on the server, create a Track in CMS(Change Management SErvice) and configure your DTR. Once done you can import the configuration file into your NW Developer Studio and make modifications.
hope this helps.
*points will be appreciated

How to identify the source column and source table for a measure

Does anyone have a query that I can use to positively identify the source column and source table for a cube measure in an SSAS cube? Visual Studio shows ID, Name, and Source, but it is nearly worthless in a large cube and database.
Also - the same for a dimension would be great.
If no query exists for this, can someone please explain how to find the source column/table for a measure and for a dimension?
Thanks.

DMVs don’t expose the DataSourceView content. AMO is much better suited for object model operations like
this than the DMVs. PowerShell is also sometimes an option, but in this case C# code would be much easier because analyzing the contents of the DataSourceView is much easier using the .Net DataSet class.
Hope this helps.
Reeves
Denver, CO

A friend gave me an older Nano 3rd generation. Can anyone tell me how to delete what is on there and how to get rid of his name. It does not connect to my itunes. I cannot even find the source or the place to restore it as suggested in the owners manual.

I have a 3rd generation ipod that a friend gave me. I cannot find anything on how to get rid of his name and music on it. This is what the owners manual says:
"Select ipod nano in the soiurce list and click the summary tab" I cannot find the source or the summary tab on itunes. Can any one help me? I would like to delete everything on it and start over but I am afraid I cannot add anything back on it. I know this is detailed and a lot, but I really need help.

Restore
Note: Because Restore erases all of the songs and files on iPod, make sure toback up any files you've saved on the iPod disk. All of your songs, videos, podcasts, audiobooks, and games can be loaded back to your iPod provided that you have them stored in your iTunes Library.
How to restore your iPod:For Windows:
1. Make sure you've reinstalled the latest version of iTunes.
2. Open iTunes, and then connect your iPod to your computer.
3. After a few moments, it will appear in the source list in iTunes. If the iPod's display doesn't show "Connected" or "Do not disconnect" you may need to put the iPod into disk mode to proceed.
4. Select your iPod in the source list and you will see information about it appear in the Summary tab of the main iTunes windows.
5. Click the Restore button. You will be prompted with one or more restore options that may prompt iTunes to automatically download of the latest iPod Software. The 4 possible restore options are:
Restore Option 1: Restore - Restores with same iPod Software version already on iPod.
Restore Option 2: Use Same Version - Restores with same iPod Software version already on iPod even though a newer version is available.
Restore Option 3: Use Newest Version - Restores with the latest iPod Software on your computer.
Restore Option 4: Restore and Update - Restores with the latest iPod Software on your computer.
6. A progress bar will appear on the computer screen indicating that the first stage of the restore process has started. When this stage is completed, iTunes will instruct you to leave iPod connected to your computer to complete restore.
7. During the stage 2 of the restore process, the iPod will show an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remains connected to the computer or iPod Power adapter during this stage. Note: The progress bar may be difficult to see since the backlight on the iPod display may be off.
8. After stage 2 of the restore process is complete and the iPod is connected to the computer, the iTunes Setup Assistant window will appear asking you to name your iPod and choose your syncing preferences similar to when you connected your iPod for the first time.
For Mac:
1. Make sure you've reinstalled the latest version of iTunes.
2. Open iTunes, and then connect your iPod to your computer.
3. After a few moments, it will appear in the source list in iTunes. If the iPod's display doesn't show "Connected" or "Do not disconnect" you may need to put the iPod into disk mode to proceed.
4. Select your iPod in the source list and you will see information about it appear in the Summary tab of the main iTunes windows.
5. Click the Restore button. You will be prompted with one or more restore options that may prompt iTunes to automatically download of the latest iPod Software. The 4 possible restore options are:
Restore Option 1: Restore - Restores with same iPod Software version already on iPod.
Restore Option 2: Use Same Version - Restores with same iPod Software version already on iPod, even though a newer version is available.
Restore Option 3: Use Newest Version - Restores with latest iPod Software version on your computer.
Restore Option 4: Restore and Update - Restores with latest iPod Software version on your computer.
6. A message will appear prompting you to enter an administrator's name and password.
7. A progress bar will appear on the computer screen indicating that the first stage of the restore process has started. When this stage is completed, iTunes will instruct you to leave iPod connected to your computer to complete restore.
8. During the stage 2 of the restore process, the iPod will show an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remains connected to the computer or iPod Power adapter during this stage. Note: The progress bar may be difficult to see since the backlight on the iPod display may be off.
9. After stage 2 of the restore process is complete and the iPod is connected to the computer, the iTunes Setup Assistant window will appear asking you to name your iPod and choose your syncing preferences similar to when you connected your iPod for the first time.
Source:
iPod nano (3rd generation) Troubleshooting Assistant
Message was edited by: michael08081

How to find the foreign function source code of srw.user_exit in report?

Hi,
We know that srw.user_exit can invoke a foreign function,for example SRW.USER_EXIT('FND SRWINIT').
But how can I find the source code of the foreign function in SRW.USER_EXIT(e.g. the source code of FND SRWINIT)?
Thanks in advance,

Hi,
You build user exits when you want to pass control from Report Builder to a program you have written, which performs some function, and then returns control
to Report Builder.
So you will have to know the foreign function you want to invoke.
For information on writing a user exit, see the following note on Metalink:
179324.1
And the "Programmer's Guide to the Oracle Precompilers, 1.8"
Navneet.

How can I find the source of report in the executable method= "Spawned" ?

Dear all:
how can I find the source of report in the executable method=>"Spawned" ?
Regards,

Hi,
Please see this thread.
To View Spawned Concurrent Program Source Code
To View Spawned Concurrent Program Source Code
Regards,
Hussein

How to find the Data source name on linux server

Hello All,
Good Morning...
I created a rpd in my local machine and deployed on the server through Fusion middle ware.
and copied the catalog file there in the server.
While working on my local machine I have two odbc connections... one is for development and other is for production.
at the time of deployment to the server I changed the development instance to production instance throught the connection pool.
I am encountering the following error while working on the analyis....
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 16001] ODBC error state: IM002 code: 0 message: [DataDirect][ODBC lib] Data source name not found and no default driver specified. (HY000)
I think this is because of the mismatch of the datasource name in server and my local machine...could you please tell me how to find the datasource names on the server?
Thanks!

Hi Dpka-
I created two ODBC connections in my system.
one for development and another for Production.
while deploying the rpd to the server I changed the development login credentials with production login.
The problem here is I just want to know whether Iam giving the same datasource name which was presented on the server or not.
I don't have access to the server now.
Is there any way to find out the datasource names which were presented on the server with the help of admin console?
Thanks!

Rapidclone - How to find the source?

Similar Messages

Maybe you are looking for