Rapidinstall getting struck in Step 3 of 5
Hi All
When I try to install Oracle Applications 11.5.9 on Windows 2003 with Oracle as user, the Rapidinstall is getting struck in Step 3 of 5 while running the command adrundb.cmd. - g performing database charecterset conversion adsvdcnv.cmd
There is no error message or alert after this and its not moving forward.
What could be the problem?
Regards
Rahman
Please verify the following:
- The user who is doing the installation is a member of Administrators(local user), not a member of GUEST or any other group.
- The server is not a domain host controller.
- You are doing the installation locally (not thru remote connection).
If the above is verified then do the following:
1) Comment out the following line in %ORACLE_HOME%\appsutil\template\ad8isqlnet.ora
sqlnet.authentication_services= (NTS)
2) Stop/Start the DB as well as the listener from Windows services
3) Run rapidwiz -restart
If the above does not work, then most probably your staging area is corrupted.
Similar Messages
-
Hi
im using macbook air..suddenly online streaming movies getting struck and it is not streaming properly..my windos laptop works fine ..interntet is good..please suggest1. System Preferences > Flash Player > Advanced > Delete All
Press the "Delete All" button under “Browsing Data and Settings”.
Install Adobe Flash Player.
http://get.adobe.com/flashplayer/
Download it first.
The next step is important.
Click Safari in the menubar and select “Quit Safari”.
Follow the prompts and install it.
Restart computer. Relaunch Safari.
2. Allow Plug-ins
Safari > Preferences > Security
Internet Plug-ins > "Allow plug-ins"
Enable it.
3. Safari > Preferences > Privacy > Cookies and website data:
Press the “ Remove All Website Data” button.
4. Safari > Preferences > Extensions
Turn those off and relaunch Safari.
Turn those on one by one and test.
5. Power off the router. Unplug it from the wall. Wait a while.
Plug it back to the wall. Power the router on. Wait until all the lights are lit properly. It will take a while.
Restart the computer.
Start up in Safe Mode.
http://support.apple.com/kb/PH14204 -
3 Messages getting struck in SMQ2 at same time with difference in seconds
Hi all,
Three EOIO messages with Queue name QBTJ.......................(same Queue id for 3days)
that is day1 QBTJ(message (a) queue id=day2 QBTJ queue id=day3 QBTJ queue id
day1 QBTJ(message (b) queue id=day2 QBTJ queue id=day3 QBTJ queue id
day1 QBTJ(message (c) queue id=day2 QBTJ queue id=day3 QBTJ queue id
.These are getting struck in smq2 at same times (compared the timings 3 days).the time at which these messages are getting struck are same with the difference in seconds.
Other than these 3 different times ,these messages are moving with out strucking in SMQ2.
I have two questions here
1)what could be the reason for only these three messages are getting struck in smq2
2)is there any parameter which could be set in SXMB_ABMIN to unlock the queue automatically with out going to smq2 and manually unlocking.
Please do not send nonrelavent blogs
Thanks,
SrinivasaHello,
you can schedule the report RSQIWKEX in your XI system. This report does automatically unlock all queues.
See the blog for more details.
regards,
Björn -
Please help. Every time I try to sync my iphone with itunes it gets stuck at step 2 and just spins. I have iTunes 10.6.3.25 installed. I've even shut down and rebooted. Nothing helps.
Based on what someone else said, I am getting the "rotating ball of eternal sadness". Yup. That about describes it.
-
Queue is getting struck for every delta change in CRM 5.0
Hi Middleware gurus,
The queues are getting struck with status 'READY' for each of these following scenarios:
1. Individual new sales order upload from CRM to R/3 (CRM - SMQ1)
2. Individual sales order delta changes upload from CRM to R/3 (CRM - SMQ1)
3. Individual new materials donloaded into CRM from R/3 (CRM - SMQ1)
4. Material delta change download from R/3 to CRM (CRM - SMQ2)
5. Knowledgebase delta changes download from R/3 to CRM (CRM - SMQ2)
I have to manually release the queue everytime, so that the changes can be uploaded. Am I missing something?
By the way individual new sales order created in R/3 and delta changes on R/3 orders are getting replicated into CRM without any problem.
Thanks,
KishoreHi Kishore,
We had similar issue before. Do not use the replication scenarios X,Y or Z. You have use the scenario A which will solve your problem for sales order replication issues. Please refer to the note 705200. For rest of issues make sure in both the systems the queue scheduler is running. If not running actively then register the each queue in both the systems using SMQS and SMQR. If still the issue is not solved then let me know.
Award points, if the issue is solved
Cheers,
Paul Kondaveeti -
Message is getting struck in outbound queue
Hi All,
I am doing a simple FILE to FILE scenario . The message is getting struck in SMQ2 (inbound queue). If i go to inbound queue and manually UNLOCK the queue entry then only the message is getting delivered . This is a new installation and we are on PI 7.0 .Please let me know if we have to so some configuration .Hi !
Check if your queues are registered in the SMQS transaction (for outbound queues) or SMQR (inbound). Go there, then enter the queues you need or reactivate them. They should be activated to process the message automatically whenever they receive something.
Try this:
http://help.sap.com/saphelp_nw2004s/helpdata/en/96/8412417301ee6fe10000000a1550b0/frameset.htm
Regards,
Matias. -
Get Digit String Step on UCCX 8.0.2
Hello,
I'm using the "Get Digit String" step to prompt callers for their account number. I am using this step to collect account numbers from Spanish speaking callers. I have created a spanish prompt asking the callers for their account number and am playing that when the call enters the "Get Digit String" step. I have also configured the "Timeout" and "Unsuccessful" steps to also play Spanish prompts before sending the call to the next step in the strip. The problem that I'm having is that if I don't enter a number, after the initial prompt, I hear a message, in English, that says "Are you still there" and then I'm prompted to enter my account number again. How do I change the "Are you still there" message to a Spanish message? Can this even be done?
Any help would be greatly appreciated.
Thanks.If you modify the system prompt, chances are in the future an upgrade can overwrite your recording. What you should do is set your retry and timeout counts to 0, put an increment node and increment an int variable, and use an if statement to check the index of that int to see how many times you retied. Within the timeout and and unsuccessful node put an audio file there to represent each message.
-
Extends read only vo get error in step 4
when i extend read-only vo, for example add a attribute , it will get error in step 4,
the error :each row in the query result columns must be mapped to a unique query attribute in the Mapped entity columns.
for example :the orgi vo is oracle.apps.irc.offers.server.OfferTemplateDetailsVO and the sql is "Select distinct XTM.Template_id,
XTM.APPLICATION_SHORT_NAME,
XTM.TEMPLATE_CODE,
XTM.TEMPLATE_TYPE_CODE,
XTM.DS_APP_SHORT_NAME DS_App_Short_Name,
XTM.DATA_SOURCE_CODE,
XTM.DEFAULT_TERRITORY default_locale,
XTM.TEMPLATE_NAME,
fnd_profile.value('IRC_DEF_OFFER_LETTER_TYPE') default_offer_letter_type
from xdo_templates_vl XTM
where XTM.Template_id = :1
and i extends vo is CUXOfferTemplateDetailsVO and the sql is "Select distinct XTM.Template_id,
XTM.APPLICATION_SHORT_NAME,
XTM.TEMPLATE_CODE,
XTM.TEMPLATE_TYPE_CODE,
XTM.DS_APP_SHORT_NAME DS_App_Short_Name,
XTM.DATA_SOURCE_CODE,
XTM.DEFAULT_TERRITORY default_locale,
XTM.TEMPLATE_NAME,
XTM.START_DATE,
fnd_profile.value('IRC_DEF_OFFER_LETTER_TYPE') default_offer_letter_type
from xdo_templates_vl XTM
where XTM.Template_id = :1
my ebs is r12.1.1
please help me .thanks.Ming,
Try to append the new attribute to the end of the existing Attribute list.
Regards,
Gyan -
My workflow emails are getting struck in SOST
Hi Guru's,
Workflow emails are getting struck in SOST, when i manually send it it is going to outlook mailbox.
How to automate it ? Do i need to set up some job to run frequently?
regards
VinayRSCONN01 - Check this program - this report send the outgoing mails.
is it offline approavl work item held in SOST ?
what is the error message there?
you may need to some piece of configuration to connect your EBP system and mail box in SCOT with help of basis. -
Recently my pc crashed and I had to have a new profile built. Now when syncing my iphone 4s to the computer the sync gets stuck on step 8 and "syncing artwork" It never finishes syncing...just sits there for hours. Subsequently most of my music and apps are missing from my iphone because it never finishes syncing. How do I fix this?
1) ensure iTunes is authorized for your iTunes store account(s)
2) connect your device and right-click or control-click it in the iTunes Source list, then choose transfer purchases from the shortcut menu that appears.
3) sync the device
iTunes will wipe the iPhone but, since you transferred your purchases in the previous step, your content will be in your library and you can re-populate the iPhone with it.
above works for purchases from the iTunes store. for everything else, check out this post by Zevoneer. -
Ignoring Keys in "Get Digit String" steps
I have a "Get Digit String" step to allow users to press '1' to bypass some announcements. The Prompt for this step is set to play the announcments. On the Input tab, I've set Maximum Retries = 0, so that I don't hear "Are you still there?" after the announcements play. On the Filter tab, I've set only the '1' key as a valid option. I've also set the Input Length = 1. What happens is that if any key other than '1' is pressed, then the Unsuccessful branch executes, and the announcements are terminated. But I only want the announcements terminated if the '1' is pressed. All other keys should just be ignored, and the announcements should continue playing.
Any ideas on how to get this done?That's not possible for one simple reason. The script executes in a serial fashion. One step at a time.
What you are asking requires asynchronous activity.
In one instance you need to play a message, and in another you need to validate user input.
From what I can think of, your best solution is to eliminate the exclusivity of the number 1 and just allow any digit.
I did think of an alternate method, but it requires greater knowledge of CallManager an MOH sources.
Here's an example:
2 CTI Port Groups, 1 for the call to land on, and 1 for your to redirect to which has a special MOH source that plays messages to the caller.
Call comes in on port group 1
You process some info
You redirect the caller to the messages phone number in port group 2
Place Call Hold
Get Digit String (filter "1")
Success
Call Unhold
Call Redirect somewhere else
Failure
Loop Get Digit Step
EDIT: Again, I want to stress that this method requires exceptional knowledge of CallManager's ability to handle MOH. There's a lot to consider on this one. -
Trying to set up my new iphone 5c using the iTunes back up from my iPhone 4. It keeps getting stuck on step 2 of 5 "syncing calendars" Considering I hardly use the calendar I don't know why it would take so long. (18 hours and counting)
Any advice would be greatly appreciated!Did you ever resolve the iCloud problem.I am in the same position and its driving me mad!!! If you have a link to an solution I would appreciate it.
-
I upgraded to itunes 10.7 and now when I try to sync my iphone 5 it gets stuck in step 6 of 8 determining tracks. I reload 10.7 and rebooted everything. What do i do?
Had the same thing happen to me when I tried syncing my iPhone this a.m. - talked to Apple 7 hours ago and evidently there's an "issue" with the iTunes server. The Apple adviser told me to try syncing in an hour. Well, rather than do that, I've continued to check Twitter, searching on "itunes sync" or "itunes server" - seems the problem's still going on.
I'm going to wait it out til tomorrow. Or whenever.
The REASON I was synching is that ever since the iOS 5 "upgrade" photos that were in albums synced from iPhoto had disappeared. Not all the photos, just all the photos in some albums. Weird.
Too many bugs in iOS 5 (syncing, Bluetooth connectivity, etc.). They should have waited til it was right before releasing it. -
My mobile get struck whenever i try to connect to ...
Hello, I am using Nokia C5-00.2 mobile and whenever i try to connect my mobil to pc, mobile will get struck.. And to come over from it i must open my battery and re-fix my battery and have to turn my mobile switch on. I don't know why is it happening like this, please help.
What Windows OS version are you using?
Happy to have helped forum in a small way with a Support Ratio = 37.0 -
Why i cann't get the executed step index of main segment of a sequence?
Hi, Everyone!
Could someone help me ,Pls?
Query:
How can i get the executed step index of main segment of a executed sequence?
Aim:
I want to let Teststand reveal the executed step index no matter when it running in main segment, setup segment or cleanup segment when i terminate executing sequence.
My action:
I add a Statement step in SequenceFilePostStep , the content is FileGlobals.GetArrayOffset1= RunState.Sequence.Main.GetArrayOffset("Pass/Fail Test1",0,"0").
but it cann't work, and it is error.The backslashs are escape characters which tell the expression to interpret the " " as actual quotes. Since the expression Doug posted had other quote marks in it here: ("", 0, "[\"Pass/Fail Test1\"]") we have to escape the inner quotation marks so that the expression will be interpreted correctly. The backslash does this.
Daniel E.
TestStand Product Support Engineer
National Instruments
Maybe you are looking for
-
I have numerous VCR family tapes I'd like to digitize and edit on my mac in iMovie. Any ideas?
-
How to View iPhone Screen on Laptop (PC) screen?
Hi The question is How to View iPhone Screen on Laptop (PC) screen? It is not a jailbreak Iphone. I know there is an opp to hook it up to desktop computer screen via HDMI, but will I get the same result plugging Iphone into laptop via HDMI? Are there
-
My iPod isn't recognized in itunes or windows
I recently got a new 30gb iPod and a few days ago, i plugged it in. Then i went to iTunes and my ipod wasn't connected. So i went to apple.com and the whole nine yards. I did everything it said to do in that specific situation and it still doesn't wo
-
Goods Receipt and Goods Return entries shows as Zero in PO history.
Dear All, The Goods Receipt and Goods Return entries are showing as "Zero" in Delivery Cost Quantity, Amt. in local currency fields in PO History (T.Code: ME23N) What could be the reason? How to find out the error? Expectiing valuable guidelines fr
-
Blue Screen on Ipad and then not switching on
have a 3rd gen iPad.... got a blue screen while using it (on the top the pixels were flickering). tried to restart the device... - Hard press of lock button and home screen - the ipad did switch off but didnt turn up back again! curretnly its dead an