Rapidshare link not working with WRT110 wireless router

I am trying to download using rapidshare but after the countdown timer reaches zero and the download link button appears, i couldn't get the link for the download file. This happens when i am wireless but when i connect my laptop directly to the linksys WRT110 router via LAN cable, i can get the link for the download file without problems.
What settings do i need to do to fix this? The rapidshare says it might be due to a rotating IP address or something. Only the rapidshare website is having this problem, other downloading sites doesn't seem to have this problem.
i am using a WRT110 router, with no security, on a wireless connection on my laptop on windows vista, using firefox.

Tried Internet Explorer 7, its the same problem. it still takes some time before i can get the link for the download file. Although i sometimes can get it faster with IE than with firefox.
Any solutions to this problem? I still thinking its the Routers configuration that has to be modified to solve this problem.

Similar Messages

T42 will not work with new wireless router

Purchased a new router, works great with my T61 and x200 but not with my older T42. The old router worked fine with all 3 thinkpad computers. I am told that the T42 has only an 11mps modemcard inside, and therefore I am out of luck. I have to purchase an external usb modem or slow down the router for the other machines. Is there nothing I can do with my T42 settings to get onto this new router? Steve

Posting the 7-character model number of your T42 would help a lot...
You can replace the wireless card with a newer bg or abg one, and it should work fine with a newer router.
For a list of applicable cards, look at this page under number 14:
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-46474
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Will an OS X Version 10.4.11 work with a wireless router?

Will a OS X Versionb 10.4.11 work with a wireless router?

blue apple > about this mac > more info button. Click on the hardware line. It has a little triangle in front of the work hardware.
If you do not have an airport card.
Ethernet BridgeEthernet Bridge "The versatile Wireless-G Ethernet Bridge can make any wired Ethernet-equipped device a part of your wireless network." from linksys example: http://www.amazon.com/Linksys-RE1000-Wireless-N-Range-Extender/dp/B005FDXMJS/ref =sr_1_1?ie=UTF8&qid=1314563758&sr=8-1 Setup: http://www.linksys.com/servlet/Satellite?c=L_Product_C2&childpagename=US%2FLayou t&pagename=Linksys%2FCommon%2FVisitorWrapper&cid=1134692497433
USB dongle
Introducting RokIt, a new wireless USB adapter that is compatible with Mac OS 10.3, 10.4, and 10.5 Leopard. http://rokland.com/store/product_info.php?products_id=319
Newer Technology MAXPower 802.11g/b Wireless USB 2.0 Stick Adapter $15.99 http://eshop.macsales.com/item/Newer%20Technology/MXP2802GU2/ Newer Technology MAXPower 802.11n/g/b USB Adapter. The easiest way to add Wireless Connectivity to ANY computer! $29.99 http://eshop.macsales.com/item/Newer%20Technology/MXP802NU2C/

HT201412 Safari could not open the page because the server stopped responding- new ipad mini's (2 from separate places) are not working with At & T router but computers work. Can you please help me. I've tried everything. Thanks ya'll!

Safari could not open the page on my new ipad mini's because the server stopped responding- new ipad mini's (2 from separate places) are not working with At & T router but computers work fine. Yesterday I got it to work. Weird. Can you please help me. I've tried everything. Thanks ya'll!

Hello SavannahSweetie,
I was looking into the issue you are desribing, and found a great article for troubleshooting wifi connections with iOS devices. It's called iOS: Troubleshooting Wi-Fi networks and connections and can be found here: http://support.apple.com/kb/ts1398.
Start with this section, and work your way down if needed.
Basic troubleshooting
Tap Settings > Wi-Fi and turn Wi-Fi off and then on again.
Verify that you are in range of your Wi-Fi router or base station.
Confirm that your Wi-Fi router and Cable/DSL modem are connected to power and turned on.
Check whether other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
Update your Wi-Fi router to the latest firmware.For AirPort Base Stations, refer to this article for information about firmware updates. For third-party Wi-Fi routers, check the manufacturer's website for details on updating your firmware.
Restart your iOS deviceHold the On/Off button until "slide to power off" appears. Slide to power off your device. When it is off, press the On/Off button to turn it back on.
All the best,
Sterling

Standby PRI not working with voice Gateway Router & CUCM

Hi ALL ,
GOOD Day all of you .
I am facing a big problem i.e standby PRI not working with VG & CUCM , I have checked all the configuration parameter on VG & CUCM found ok but I am unable to make any call from standby link also incoming not come on the standby link . When I make a call on my Pilot no but getting busy tone .
I observer the some errors on VG like Cause i = 0x8286 - Channel unacceptable on my second PRI channel .
Please help me to reslove this proem .
Following are the PRI configuration Parameter on CUCM .
Product Specific Configuration Layout
Line Coding : HDB3
Framing : NON CRC4
Clock : External
Input Gain (-6..14 db) 0
Output Attenuation (-6..14 db) 0
Echo Cancellation Enable
Echo Cancellation Coverage (ms) 64
PRI configuration on VG
interface Serial0/0/1:15
encapsulation hdlc
isdn switch-type primary-net5
isdn incoming-voice voice
isdn bind-l3 ccm-manager
BR,
SANDIPAN

Hi Craig ,
Thanks for your reply .
We are using the full 30 channel E1 PRI .
following are PRI Channel Statistics:
%Q.931 is backhauled to CCM MANAGER 0x0003 on DSL 1. Layer 3 output may not apply
ISDN Se0/0/0:15, Channel [1-31]
Configured Isdn Interface (dsl) 1
   Channel State (0=Idle 1=Proposed 2=Busy 3=Reserved 4=Restart 5=Maint_Pend)
    Channel : 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
    State   : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
   Service State (0=Inservice 1=Maint 2=Outofservice 8=MaintPend 9=OOSPend)
    Channel : 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
    State   : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Please find following debug error
VG_RO_01#isdn test call interface serial 0/0/0:15 09665484798
Mar 7 03:00:54.570: ISDN Se0/0/0:15 Q921: User RX <- RRp sapi=0 tei=0 nr=5
Mar 7 03:00:54.570: ISDN Se0/0/0:15 Q921: User TX -> RRp sapi=0 tei=0 nr=4
Mar 7 03:00:54.570: ISDN Se0/0/0:15 Q921: User TX -> RRf sapi=0 tei=0 nr=4
Mar 7 03:00:54.574: ISDN Se0/0/0:15 Q921: User RX <- RRf sapi=0 tei=0 nr=5
CCIL_PUNE_DR_VG_RO_01#
Mar 7 03:00:55.994: ISDN Se0/0/0:15 Q931: Applying typeplan for sw-type 0x12 is 0x0 0x1, Called num 09665484798
Mar 7 03:00:55.994: ISDN Se0/0/0:15 Q921: User TX -> INFO sapi=0 tei=0, ns=5 nr=4
Mar 7 03:00:55.994: ISDN Se0/0/0:15 Q931: SETUP pd = 8 callref = 0x0084
Bearer Capability i = 0x8890
Standard = CCITT
Transfer Capability = Unrestricted Digital
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA9839F
Exclusive, Channel 31
Called Party Number i = 0x81, '09665484798'
Plan:ISDN, Type:Unknown
Mar 7 03:00:56.006: ISDN Se0/0/0:15 Q921: User RX <- RR sapi=0 tei=0 nr=6
Mar 7 03:00:56.018: ISDN Se0/0/0:15 Q921: User RX <- INFO sapi=0 tei=0, ns=4 nr=6
Mar 7 03:00:56.018: ISDN Se0/0/0:15 Q931: RELEASE_COMP pd = 8 callref = 0x8084
Cause i = 0x8286 - Channel unacceptable
Mar 7 03:00:56.022: ISDN Se0/0/0:15 Q921: User TX -> RR sapi=0 tei=0 nr=5
Mar 7 03:00:59.995: ISDN Se0/0/0:15 Q921: User TX -> INFO sapi=0 tei=0, ns=6 nr=5
Mar 7 03:00:59.995: ISDN Se0/0/0:15 Q931: SETUP pd = 8 callref = 0x0084
Bearer Capability i = 0x8890
Standard = CCITT
Transfer Capability = Unrestricted Digital
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA9839F
Exclusive, Channel 31
Called Party Number i = 0x81, '09665484798'
Plan:ISDN, Type:Unknown
Mar 7 03:01:00.007: ISDN Se0/0/0:15 Q921: User RX <- RR sapi=0 tei=0 nr=7
Mar 7 03:01:00.019: ISDN Se0/0/0:15 Q921: User RX <- INFO sapi=0 tei=0, ns=5 nr=7
Mar 7 03:01:00.019: ISDN Se0/0/0:15 Q931: RELEASE_COMP pd = 8 callref = 0x8084
Cause i = 0x8286 - Channel unacceptable
Mar 7 03:01:00.019: ISDN Se0/0/0:15 Q921: User TX -> RR sapi=0 tei=0 nr=6
Mar 7 03:01:03.995: ISDN Se0/0/0:15 Q921: User TX -> INFO sapi=0 tei=0, ns=7 nr=6
Mar 7 03:01:03.995: ISDN Se0/0/0:15 Q931: RELEASE_COMP pd = 8 callref = 0x0084
Cause i = 0x80E6 - Recovery on timer expiry
Mar 7 03:01:03.995: ISDN Se0/0/0:15 **ERROR**: CCPCC_CallOrigination: SETUP timed-out (2nd T303) to NETWORK. The SETUP failed.
BR ,
SANDIPAN

Will Macbook late 2008 aluminum work with N wireless router?

I see in the tech specs that it is a/b/g compatible. Will it work with an N router?

Welcome to Apple Support Communities.
The short answer is 'Yes', it will work with an N router.
http://support.apple.com/kb/sp500
Why the 'draft' notation?
The 802.11n draft specification was originally introduced in 2003.
It was not finalized by IEEE until September 2009.
Details here, but fair warning: The IEEE pending/finalized/withdrawn 802.11 spec chart is enough to make your eyes bleed!
http://www.ieee802.org/11/Reports/802.11_Timelines.htm

No Problem hooking up Vista laptop with WRT110 Wireless Router but can not get XP laptop to see it

I purchased a WRT110 Linksys wireless router this afternoon and had no problem configuring it for my wired desktp and my wireless Vista laptop, but my Acer XP wireless laptop will not even see the network. I have tried WEP, WAP, and no security, but I can see the neighbors routers but I can not see mine. My XP laptop is an Acer 3680-2574 with a Broadcom 802.11g network adapter.

Is the SSID enabled on the router ?
What is the firmware on the router ?
Click here to check the updated list of firmwares.
For information on upgrading the firmware on the linksys routers :
http://linksysfirmwares.googlepages.com/upgradingfirmware
For information on wireless security :
http://linksysfirmwares.googlepages.com/wirelesssecurity
C | EH
linksyshelp.blogspot.com

IPhone 5 still not working with 5GHz wireless frequency?

Even with the latest 6.0.2 update, for sure the iPhone 5 has some sort of bug that prevents it from streaming properly using the 5GHz frequency in dual-band routers. I just got a brand new Netgear 600N wireless router (for home) and brand new Belkin 750 dual band (for work). Both have 5GHz band frequency option, but on either one, the iPhone 5 hardly downloads, or at all. It's as if a 14.4 K modem and molases had a baby.
Switching to 2.4GHz, and download speeds are normal relative to my service provider.
It's not the distance of the iPhone to the routers either, because they're literally an arm's length away when I'm testing it.
APPLE, what do you have to say about this?

Hi Tom from Jabra - One question - I got IPhone 5 do I NEED to spend the extra bucks on a HALO2 Apple version, or save the dollar for other accessories ?
In other words: Will the HALO2 (not the Apple version) work with Apple and non Apple devices?
In advance thanks for your time!
-Lundsgaard

Can't get airport express to work with new wireless router

I just swapped out a linksys wrt54gl for a linksys E1200 wireless router on my home network. My PCs and iPads, and TV all made the switch to the new network fine, but the airport express isn't working. All I want to use it for is to transfer iPad audio to my home speakers. but my iPad AirPlay shows the old Airport as an option, I can switch to the Airport, no sound comes out the home speakers, then the iPad reverts AirPlay back to iPad. This model Airport just has power, USB, and LANA ports, so it doesn't seem like it would be complicated. A CAT 5 cable goes from the airport WAN port to one of the ports on the back of the new wireless router. What did I overlook?

I thought I'd jump in here with you network experts for some help with a related networking problem.
Equipment: iMac 24-inch, Early 2009 2.93 GHz Intel Core 2 Duo; 2 MBP w/Retina Display; AirPort Express version 7.6.4 (Conncected Using: DHCP; Router Mode: DHCP and NAT); Comcast/Xfinity Gateway 1 Modem w/2.4 GHz WiFi.
#1. Comcast forced me to change modems to their Gateway 1 saying mine was at “End of Life.” Previously, my home network was set up with AP Express and worked fine using my iMac as a server. After installing the Gateway 1, I could not get my network to work after repeated calls to their support, online chats, trial and error, reading community chats and articles, etc. I put the Comcast modem in passive mode using the “Bridge” setting and re-established my network with my AP. I’m using my iMac as a server for file sharing with my two MBP’s. The network isn’t recognized in sleep mode and will not wake from sleep and I can’t find it or Connect to Server when the computer is asleep. I’ve tried all combinations within the Energy Saver/Screen Saver/Security preferences. I’ve reset the SMC and other like resetting to factory defaults. How can I fix this and what are the correct settings for my home network to function again with my AP Express?
#2. TimeMachine stops doing backups when the computer is in sleep mode, understandably because I’m not making any changes on the iMac that need to be backed up. But using my laptops on the network, I am making changes in shared files that are hosted on the iMac that I would like backed up. I cannot get the schedule feature to work to wake up the computer long enough to do a backup nightly because, as a security feature, I log out after 30 minutes of inactivity. I understand the schedule doesn’t work unless you’re logged in. Is there a way for me to make this work?
Thanks!

Kernel 2.6.32 does not work with RT2860 Wireless Card

since 2.6.31 my RT-2870 is not longer working
ifconfig says that the Wireless ra0 was renamed to wlan0 and since then its not longer working
since 2.6.32 my RT-2860 (build in) is not longer working too
it was renamed from ra0 to wlan0 too and read above^^
whats happening there?
since now i used wpa_supplicant but i already tried with NetworkManager and WICD
//Edit: 2870 works in 2.6.32
Last edited by Vamp898 (2009-12-17 06:58:27)

The Official RT-2860 from the RaLink homepage does not work too
Homepage: http://www.ralinktech.com/support.php?s=2
Error:
make -j3 HOSTCC=i686-pc-linux-gnu-gcc CROSS_COMPILE=i686-pc-linux-gnu- LDFLAGS= -j1 -C /usr/src/linux M=/var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux PLATFORM=PC CHIPSET=2860 RT28xx_DIR=/var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0 RT28xx_MODE=STA clean modules
make: Entering directory `/usr/src/linux-2.6.32'
CLEAN /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/Module.symvers /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/modules.order
LD /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/built-in.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/crypt_md5.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/crypt_sha2.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/crypt_hmac.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/crypt_aes.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/crypt_arc4.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/mlme.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/cmm_wep.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/action.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/cmm_data.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/rtmp_init.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/cmm_tkip.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/cmm_aes.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/cmm_sync.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/eeprom.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/cmm_sanity.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/cmm_info.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/cmm_cfg.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/cmm_wpa.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/dfs.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/spectrum.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/rtmp_timer.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/rt_channel.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/cmm_profile.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/cmm_asic.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/cmm_cmd.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../sta/assoc.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../sta/auth.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../sta/auth_rsp.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../sta/sync.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../sta/sanity.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../sta/rtmp_data.o
/var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../sta/rtmp_data.c: In Funktion »STAHandleRxMgmtFrame«:
/var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../sta/rtmp_data.c:689: Warnung: Variable »pRxD« wird nicht verwendet
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../sta/connect.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../sta/wpa.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../os/linux/rt_linux.o
/var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../os/linux/rt_linux.c: In Funktion »RtmpOSNetDevAttach«:
/var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../os/linux/rt_linux.c:1689: Fehler: »struct net_device« hat kein Element namens »open«
/var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../os/linux/rt_linux.c:1690: Fehler: »struct net_device« hat kein Element namens »stop«
/var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../os/linux/rt_linux.c:1691: Fehler: »struct net_device« hat kein Element namens »hard_start_xmit«
/var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../os/linux/rt_linux.c:1692: Fehler: »struct net_device« hat kein Element namens »do_ioctl«
/var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../os/linux/rt_linux.c:1702: Fehler: »struct net_device« hat kein Element namens »get_stats«
/var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../os/linux/rt_linux.c:1736: Fehler: »struct net_device« hat kein Element namens »validate_addr«
make[1]: *** [/var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../os/linux/rt_linux.o] Fehler 1
make: *** [_module_/var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux] Fehler 2
make: Leaving directory `/usr/src/linux-2.6.32'

IWeb Page Navigational Links not working with Internet Explorer 7

I'm hoping someone can help me out here? My wife created her 1st website using iWeb. I am testing the sites functionality before we publish it. All the pages and links work fine on Firefox and Safari for windows. However, the page navigational links are not working on Internet Explorer 7. All I see is a dot to the left side of where the page links should be. When I start the site in IE7 I get an Active X script warning and I am asked if I want to allow the script to run; to which I reply yes. After I allow the Active X script the dot to the left side of where the page links should be disappears, but the links do not appear.
Is there anyway to resolve this? Most of the members of her club have Windows based PCs and are using IE7.
Message was edited by: cviz821

Yes, Javascript is running on IE7 and other java script applets appear to be working with the exception of the Navbar script.
It would be great if my wife's friends used a "real" browser, unfortunately 70% of the people on the web use IE7, so this is a real concern if we can't get this to work. I'v seen other iWeb site on IE7 that seem to function fine, so I'm not sure what the issue is here.
Message was edited by: cviz821

Airplay not working with non-apple router

I use an airport express only for playing music in a remote location. It stopped working after I switched my main wireless router from a Time Capsule to a Linksys running Tomato USB firmware.
The Express is set up as "join a wireless network" with the correct SSID and password. The light on the Express is green and the main router status page shows it is connected, but Airplay cannot see the Express from either iTunes on my macbook or my iPhone. Also I cannot see the device in Airport Utility. When I connect the Express to my computer with ethernet, Airport Utility can see it and so can iTunes.
I have another Express hooked to the network via ethernet and everything works fine with that one.
Surely Airplay should work with non-apple wireless routers. Any suggestions would be appreciated.
thanks

Factory reset the express, and try to make it join again...

Macbook pro not working with BT infinity/ router?

Hi, well basically our family got BT infinity about 2 weeks ago, and it worked with my macbook for about 3 days or so, but after that just suddenly stopped working. It says it's connected in airport and gives full connection, but chrome, spotify, skype, etc do not work. However the rest of the computers in the house which run on windows do work. For the last week or so I have been using a neighbour's open wireless (Netgear) which has been pretty consistent if a little slow. So basically, is there anything i can do? i've pretty extensively looked at all the forums regarding MBPs and routers, and it seems it may be a mac fault (meaning i may be in the wrong forum.) but any help would be appreciated. thanks.

kategreat wrote:
Hi, well basically our family got BT infinity about 2 weeks ago, and it worked with my macbook for about 3 days or so, but after that just suddenly stopped working. It says it's connected in airport and gives full connection, but chrome, spotify, skype, etc do not work. However the rest of the computers in the house which run on windows do work. For the last week or so I have been using a neighbour's open wireless (Netgear) which has been pretty consistent if a little slow. So basically, is there anything i can do? i've pretty extensively looked at all the forums regarding MBPs and routers, and it seems it may be a mac fault (meaning i may be in the wrong forum.) but any help would be appreciated. thanks.
Hi there,
It sounds to me like you're having troubles with the wireless channels on the Home Hub.
Here's what I'd suggest you do: Download istumbler on your Mac (or inssider 2 on your PC) and use this to check which wireless channel you're currently on and if need be, change to a less congested channel.
I hope this info helps.

Auto-capitalization not working with apple wireless keyboard?

My ipad settings have auto-cap on. When using the on-screen keyboard the auto-cap works. When I switch to the wireless apple keyboard auto capitalization fails to work.
Any suggestions?
Does anyone have the wireless apple keyboard working with auto cap on iPad?

Did you ever find a solution to your problem? I have the same issue but mine also includes the period shortcut.
If I am hooked up to my keyboard the auto stuff doesn't work even if I manually tap the screen to type.
The fact that this does not work is the issue - not laziness in relying on shortcuts. This needs to be fixed.

Appletv worked with old wireless router but now wont with airport extreme

I purchased an appeltv and mac mini in December. Connected everything through my old linksys wireless router and everything worked great.
past weekend I purchased a macbook and so I decided to get an aiport extreme also and keep it all in the family.
well i now have my mini, macbook, printer everythings sharing printers and streamin itunes back and forth....but now my appletv wont sync.
I cant get the appletv to popup in either of my macs itunes.
any ideas???

If the OP has used both routers then this is correct.
I suspect though that the OP has simply swapped out the router for the new extreme. In which case they may need to delete the tv's from the itunes prefs and relink them (the pass code thing). Streaming is initiated from the tv, syncing from itunes, if streaming works and syncing doesn't it may well be that the tv sees the itunes library but itunes doesn't see the tv, or at least doesn't see it as the same device it's linked to.

Rapidshare link not working with WRT110 wireless router

Similar Messages

Maybe you are looking for