Rapidwiz input error, can it be fixed w/out a re-run?

- doing rel12 upgrade. made an error on rapidwiz input.
- some services on the apps-primary and app-additional should have been disabled.
- rapidwiz has completed the "create upgrade file system" on the "apps-primary" node.
- Is there a way to change the services on the "apps-primary" not to start specific services?
any help?

In Oracle Applications Manager, click on the Auto Config link, then oa_services. Disable any of the enabled services you do not want to run and run autoconfig on that node.

Similar Messages

  • HT3743 I purchased an iphone 3g that was to be open to any carrier, I went to restore it to my itunes account and get a 1015 error, can this be fixed.  I am new to the iphone and like the product but cannot buy new.  Please help. THANKS

    I purchased an iphone 3g that was to be open to any carrier, I went to restore it to my itunes account and get a 1015 error, can this be fixed.  I am new to the iphone and like the product but cannot buy new.  Please help. THANKS

    You got ripped off. You bought a hacked/jailbroken phone. That's what error 1015 means. Return it and get your money back if possible and buy a phone from a legitimate source.
    Discussing jailbroken / hacked phones is forbidden by the terms of service. Jailbreaking / hacking voids any warranty and forfeits your right to support here or from Apple. You can not get help here.

  • Error: Can't connect to auth server at /var/run/dovecot/auth-master: No su

    Error: Can't connect to auth server at /var/run/dovecot/auth-master: No such file or directory
    error showing up, there is no auth-master file in /var/run/dovecot
    this has just happnened over night
    any ideas how to re-install dovecot
    google search goes on about linux but barely any info about max osx server

    auth-master is created when you start the mail service. Deleted if you stop the mail service. If that is not happening, you may have to re-install mail. Dovecot is the IMAP/POP part of the mail service. I am not sure what happens if you disable IMAP. I am guessing it is not there. But that is the extent of any tips I can offer. I suppose you could reinstall, but that seems a bit extreme to me.

  • Boneheaded Install Leads to "Disk Error"  Can it be fixed?

    I installed windows following the instructions (sort of) but missed the note indicating that I should "format the partition using the NTFS file system." So now I get the infamous (based on the number of related posts I've seen) "Disk Error" message Is there any way I can "unformat" my partition or did I just throw away 25GB of my hard drive?
    Note: unlike some others, I have no trouble starting up the OS side of the house.
    Best,
    David
    but it was unanswered.

    Use the convert fs=ntfs (check on syntax and spelling)
    I think it is safer to keep it NTFS. If you need to write to NTFS, use MacFUSE but be aware that it can or use to interfere with the OS X Startup Disk control panel even recognizing and showing "Windows" entry to change default.
    Use WinClone in OS X to backup if you think you need to or want to restore an image later.

  • Itunes gives me an error "can not open url at this time"

    Every time I open Itunes on my computer it asks me to update Itunes and  click on the update... it then gives me an error message stating it can not open URL at this time....

    Entry point errors can often be fixed by deleting the offending dll, then repairing the component it is part of. CoreMedia.dll is part of Apple Application Support.
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If the advice above doesn't resolve things you could try this alternate version:
    iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
    which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
    Or roll back to the previous build:
    iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
    iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
    tt2

  • CRC Error and input Error how can fix these

    FastEthernet0/13 is up, line protocol is up
      Hardware is Fast Ethernet, address is 0004.4d27.66cd (bia 0004.4d27.66cd)
      Description: EDL-P-Box-NO-4
      MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec,
         reliability 250/255, txload 1/255, rxload 1/255
      Encapsulation ARPA, loopback not set
      Keepalive not set
      Auto-duplex (Full), Auto Speed (100), 100BaseTX/FX
      ARP type: ARPA, ARP Timeout 04:00:00
      Last input 18:52:43, output 00:00:01, output hang never
      Last clearing of "show interface" counters never
      Queueing strategy: fifo
      Output queue 0/40, 0 drops; input queue 0/75, 0 drops
      5 minute input rate 12000 bits/sec, 6 packets/sec
      5 minute output rate 24000 bits/sec, 6 packets/sec
         14488019 packets input, 2783320210 bytes
         Received 345346 broadcasts, 0 runts, 0 giants, 0 throttles
         261028 input errors, 259429 CRC, 1599 frame, 0 overrun, 0 ignored
         0 watchdog, 84207 multicast
         0 input packets with dribble condition detected
         19658279 packets output, 3529106068 bytes, 0 underruns
         0 output errors, 0 collisions, 1 interface resets
         0 babbles, 0 late collision, 0 deferred
         0 lost carrier, 0 no carrier
         0 output buffer failures, 0 output buffers swapped out
    PAD-8-1-10.179#cle
    v

    Hi,
    Check out the below explanation for CRC error and farme error and few useful links to trouble shoot these type of problems
      The CRC error rate is 1.75915% (greater than 1 in a million packets),
      and the collision rate is less than 0.1%.
      This can indicate excessive noise or transmission problems on the LAN or the LAN
      bus itself. A high number of CRCs is usually the result of collisions or a station
      transmitting bad data.
      TRY THIS: Check cables to determine whether any are damaged. If 100BaseTX is being
      used, ensure Category 5 cabling is being used and not another type, such as Category
      3.
      There have been 1599 'frame errors' reported.
      This indicates the number of packets received incorrectly, having a CRC error
      and a non-integer number of octets. On a LAN, this is usually the result of collisions
      or a malfunctioning Ethernet device.
    TRY THIS: Monitor the level of frame errors over time. If they are increasing,
      try swapping interfaces and or ports to identify the problem.
    http://www.cisco.com/en/US/customer/products/hw/modules/ps2033/products_tech_note09186a008009446d.shtml
    http://www.cisco.com/en/US/docs/internetworking/troubleshooting/guide/tr1904.html
    http://www.cisco.com/en/US/docs/internetworking/troubleshooting/guide/tr1904.html
    Hope that helps out your query !!
    Regards
    Ganesh.H

  • Part of Photoshop isn't functioning.  Under adjustments, when HDR toning is clicked on I get a code:  Error 48: File or folder does not exist.  Line:11  - $.evalFile(g_StackScriptFolderPath   "StackSupport.jsx");  How can it be fixed?

    The phone company was here working on something while I was gone.  They sat down at my computer (iMac) and since then HDR toning doesn't work.  Get the code:   Error 48: File or folder does not exist.    Line: 11     ->  $.evalFile(g_StacScriptFolderPatch + "StackSupport.jsx");   How can this be fixed?   

    Go to //Applications/Adobe Photoshop [Version]/Presets/ Scripts/Stack Scripts Only/ and see if StackSupport.jsx is there. If it is not, uninstall and reinstall Photoshop to have it added back in. If it is there, first try recreating the Photoshop Preferences (hold down Command+Option+Shift while launching Photoshop).

  • HT201210 My iPad is not recognized by Finder or iTunes when it is plugged into the computer.  i ran the Restore sequence and got an error message stating "The iPad could not be restored.  An unknown error occurred (1611).  Can this be fixed?

    My iPad is not recognized by Finder or iTunes when it is plugged into the computer.  i ran the Restore sequence and got an error message stating "The iPad could not be restored.  An unknown error occurred (1611).  Can this be fixed?

    iTunes: Specific update-and-restore error messages and advanced troubleshooting - http://support.apple.com/kb/TS3694 - relating to iPad, iPhone, iPod touch, iTunes
    Security software issues covered in: iTunes: Troubleshooting security software issues - http://support.apple.com/kb/TS3125

  • Windows 8 Recovery USB causes UEFI error: "Grub error: Can't find gpt 7" [FIXED]

    Hello everyone,
    Here is my situation.  I had a dual boot setup on my toshiba S855D (Win 8/Ubuntu 12.10).  After a few months my win 8 install was giving me strange errors.  I decided to do a full reinstall using the recovery USB I made. (I had reinstalled once before)  When I plugged in my USB after restarting the computer (in USB as first boot), I got the error: 'Grub error. Can't find gpt 7' If I tuned off UEFI, the computer could at least detect the USB but not do a reinstall.  Thinking it was a Grub error I formatted the HD (using an ubuntu liveUSB).  The problem persisted. I installed boot-repair on ubuntu and tried that, but no effect.  I have tried to install an updated bios from the CD image in the bios zip, but it wouldn't execute the commands in the ini file.  I even tried to install an old xp disk I had to see if I could install the bios update that way, but the windows install  repeatedly froze.
    Quick version: dual boot (win8/ubuntu)->try to reinstall win8, "error: Grub Error: Can't find gpt 7", when usb is attempted to be booted from. ->Wiped hdd, but problem persisted. -> tried many ways to fix, but nothing works.
    I have been reading many forums for the past few days, and nothing looks to work.  Any and all help would be really helpful.
    Solved!
    Go to Solution.

    I finally got it!
    After much poking around the internet, I was finally able to identify my problem.  My bootx64.efi in the EFI/Boot folder wasn't working.  I found this out by putting UEFI shell on another usb and using that to test my *.uefi files.  Thankfully, I had a backup of my EFI folder from my initial Ubuntu install.  This had a backup made my ubuntu. (bkpbootx64.uefi) I ran the backup and the USB worked!  
    On another forum someone (Agent268) said this, which may help.  I'm guessing you need to have a windows pe DVD/USB to make this work though. 
    "You should be able to use DISM to manually reimage this bad boy using the WIM or SWMs on that USB recovery flash drive."
    Hope my research helps someone out there.  Cheers to everyone who looked.

  • I can't open Itunes on my mac. error 130001. how to fix?

    I can't open Itunes on my mac. error 130001. how to fix?

    Hi gingerjacker,
    Welcome to the Support Communities!
    Did you restart your Mac and try again?  Sounds simple, but it's a good first step when troubleshooting.
    If the issue persists you may need to delete iTunes from the Applications folder and download a fresh copy.  This does not affect your iTunes library, which is in a different location.
    Troubleshooting iTunes installation on Mac OS X
    http://support.apple.com/kb/ht2311
    Apple - iTunes - Download iTunes Now
    http://www.apple.com/itunes/download/
    Cheers,
    - Judy

  • What's the fix for this error: Can't create the file "feed.xml."

    I try to publish my site from iWeb but I get an error which is below.
    Publish Error
    Can’t create the file “feed.xml.” The disk may be damaged or full, or you may not have sufficient access privileges.
    Anyone know the fix?

    Whether 'feed.xml' is the first file it is trying to upload, indicating a general failure to connect, or whether it's choked at that particular point would be the question. It would be worth your getting an FTP program if you don't already have one - Cyberduck is free - and checking whether any files at all have been uploaded.
    Is this the first time you've tried to publish or are you updating an existing site? If it's the first you should check carefully that your settings are correct, in particular the 'path' which varies between different hosts and may be blank or may be something like 'public.html' or 'htdocs' - this would lead to the actual webspace which may not be the root level as you access the FTP server.
    You could also try publishing to a local folder - create a special folder somewhere and specify it when setting iWeb to do this, check the contents are OK, then upload the contents of the folder (not the folder itself) using Cyberduck.

  • Error code B81AA24C on my officejet pro L680 all-in-one ... can printer be fixed? how??? thanks..

    error code B81AA24C on my officejet pro L680 all-in-one ... can printer be fixed?  how???  seems to not power up ...thanks..

    Hello
    Is it possible to do a reset on the unit? Via: http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c00841912&cc=us&dlc=en&lc=en&product=2512009&tmp​...
    To try to get it in default mode
    Kind regards
    Best regards,
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"
    Although I work for HP my posts and replies are my own .....

  • I have cs4. Had to rebuild my mac OS after malware infected it. Now getting an error code 150:30 when trying to open PS. Can this be fixed or do I have to upgrade to cs6?

    I have cs4. Had to rebuild my mac OS after malware infected it. Now getting an error code 150:30 when trying to open PS. Can this be fixed or do I have to upgrade to cs6?

    150:30 means licensing is broken. It's a common CS4 error. On Macs it usually happens when Photoshop is retrieved from backup or migrated from another Mac. Photoshop is never meant to be moved that way. As advised, you should uninstall and reinstall from your discs.
    Sine reinstall only apply the base install and the CS4 Help > Update function is outdated, you will have to manually download and install your updates from here:  Product updates for Bridge and Photoshop.
    Gene

  • When trying to convert PDF to Word I get message "An Error occurred while trying to access this Service"  Never had problems before   how can it be fixed

    When trying to convert PDF to Word I get message "An Error occurred while trying to access this Service"  Never had problems before   how can it be fixed??

    It appears that you have a subscription to one of Adobe's online subscription sersvices.
    Here, you have a user-2-user forum for users of the free desktop PDF viewer Adobe Reader.
    Some resources for following up with question about Adobe online services.
    To contact support for acrobat.com subscription services: 
    https://www.acrobat.com/misc/en/contact-support.html 
    Other links to support:
    http://helpx.adobe.com/contact.html
    http://helpx.adobe.com/support.html
    contact Adobe Customer Care on Twitter @AdobeCare.
    Phone support (for a fee - have credit card ready)
    800-833-6687, Mon - Fri, 5AM - 7PM PT
    Be well...

  • When trying to sync my ipod 5th generation i get error -69 can this be fixed please

    when trying to sync my ipod 5th generation i get error -69 can this be fixed please and if so could you explain to me how to fix ive restored it and it still does it
    thanks for any help regards charmaine

    This is about the only suggestion I have for you.
    http://support.apple.com/kb/ht1210
    If you do happen to run into a bad file, try converting it to a different format and resyncing the new version over to your iPod.
    B-rock

Maybe you are looking for