Rapoo Headset Wireless device problem with S205 ideapad

Problem on my s205 wireless lan card with rapoo headset. Once I connected the wireless headset adapter to usb port of S205, my wireless Lan disconnected from internet. First the speed getting slower and wireless connection to internet disconnected. I had updated the drivers but still the same problem. Please help. tnx.

Similar Messages

Wireless printing - problem with MAC integration

Hi everybody.
Just bought a Macbook pro and cannot get it to recognize my printer.
Devices within network:
- Belkin WLAN Router
- HP Laserjet CM1312 multifunctional printer - with HP 2101nw wireless G (printing and even scanning works fine wireless!)
- Acer Notebook with XP Home (used to set up the 2101 wireless)
- Acer Netbook with XP Home (added later to network, no problem with printing, setup took 5 min)
Antivirus software: Avira Premium Security Suite on both XP's
WPA-PSK encryption, no mac filtering.
The Macbook can access internet, but nothing happens when I try to print. I wanted to stop the hassle that Windows is causing occasionally. Frustrating experience with the Mac so far.
Can anybody help?
This question was solved.
View Solution.

I have removed the printer, and added again - a couple of times. I was not sure what protocol to chose (LPD, IPP, Socket).
I took your advice and tried, but with the right click (ctrl pressed), nothing happens. The normal window for the print queue opens, and I cannot select anything like "Reset Printing System".
This does not work either, no Printer with "Bonjour" is offered for selection:
"Select the plus sign to re-add it. Look for the printer with Bonjour next to it, select it and wait until the "Add" button becomes available. Click it."
When I select the plus sign, I can only make settings in the "IP" area. Standard, Fax and Windows have nothing to select or to put in. "IP" offers Protocol to select and Address to fill in. I put in 192.168.2.6 and tried the different protocols. "Print with" offers generic PostScript printer, Generic PCL Laser printer, "other" and printer software - thats where I selected the driver for the cm1312
Can you tell what I did wrong? Thanks for trying

Wireless signal problem with WRT160Nv3 Firmware Version: v3.0.02

My 24" iMac doesn't seem to like the new router very much. Half of the time it can't find the router, half of the time it finds it with very low signal and can't connect to it due to connection time out error. My iPhone seems better, but sometimes I can only see two bars even when I put it on top of the router. PS3 keep loses connection when on wireless.
The PS3 is only 4 meters away from the router, and the iMac is only 1.5 meters away. There is nothing in between these devices apart from me and I am NOT fat at all.
The router is siting on the floor against a wall whereas iMac and PS3 are on a table next to it. I believe any normal wireless devices should operate fine within such short range.
Meanwhile those devices are working fine with Apple's Airport Express before it was replaced by this new router. My iPhone can even do App Store update in my car parked at the ground floor car park, while the Airport Express was at exactly the same place where the router is now, in my flat up at 16th floor!
Setting wise, everything under wireless setting is left as factory default, apart from the security setting which was set to be WPA2 personal.
From what I've experienced, I think this is a faulty device. I just need someone from Linksys to confirm this for me.
Cheers
PS. Wired connections are fine.

Sorry scrooge, I can't log in to the forum for a few days due to keep getting servlet errors when I click the login button.
Anyways, I've changed the channel to 8 with 20MHz because there were three wireless network on channel 11 already. Then the problem seemed solved. But I'm just been curious and correct me if I'm wrong, the 20/40MHz mix setting was operating at 40MHz as I can see it was using two channels 6,1 but unfortunately those two are both also been occupied.
To me, it seems like the router was only trying to stay on three channels 1,6 and 11. I know that those three channels are real "CLEAN" channels but shouldn't the router try to use other overlapped channels as well, when those three are obviously occupied?
I didn't try the beacon interval or Fragmentation/RTS Threshold settings, because I think those settings can only provide a slight advantage over others who are sharing the same channel, and they don't actually solve the conflict problem.
Cheers

Wireless printing problem with hp officejet 100 mobile printer from win 7 dell laptop

My hp officejet 100 mobile printer was working fine with my dell XPS 15 in bluetooth wirelessly until my laptop crashed. Now I can not get it to print internet info except with hard wire connection. Page loads half way and then stops. Must shut down laptop and shut off printer or hard wire and shut off bluetooth. down loaded lastest drivers to no avail. printer will print from cell phone and win 8 computer via bluetooth but not win 7 laptop.

Sorry you are having problems with printing from the internet. I have a few more questions to ask you before I can be of much assistance.
What web-browser are you using?
Do you have any problems printing from Word or other non-internet documents?
What did you do to fix your computer (system restore, clean install of the OS, etc)?
Have you tried an alternate web-browser?
Make sure to install all of your Microsoft updates to see if that helps. Otherwise, answer those questions for me please and I will be happy to help.
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

STH 30 headset make some problem with sonyxperia z1 compact

Hello,
My name is Giuseppe. Earlier I buyed a sony xperia z1 compact and in order the headset SHT30. The sound quality is great,
but I have some problem when I listen music(and only when I listen music. If I call someone they work!)
particulary, the problem rises when I try to down the volume(with the commands of headset). when I do this, the volume fall down totally(the smartphone make the shake mode) . If I try to up the volume, with the command of headset, It doen't works.
I try the smartphone with other headset( I have a tablet) and they work well. Thinking that the problem was the headset, I try these with my tablet(and with my smartphone's sister). I listened music and they work.
the problem is only when I listen music with my phone. I think that there's some bug.
can you help me?
regards
giuseppe

Contact your local Xperia Care
http://support.sonymobile.com/global-en/contactUs/
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Wireless printing problems with 10.5.4 and Epson printers

Anyone else know about problems with Epson printers such as this no longer functioning wirelessly with bonjour once upgrade to 10.5.4? It appears they are not supporting this with a new driver yet?
At this time, Epson says they have no drivers for 10.5 and this specific printer but wondered if there are more general problems with 10.5.4 and bonjour with Epson or others?
Thanks
Paul
MacBook Pro Mac OS X (10.5.4) Using Epson CX11-NF printer

I have 5 computers-G4 PowerPC, two G4 12" laptops, G5 Mac Pro dual, Macbook Pro--with the older computers all running 10.4.11, the new ones 10.5.4. Until Friday, I was able to print with all of them to an Epson Stylus Photo R200 via Airport Extreme. After installing software for my new G3 iPhone on the G5 Mac Pro the printer connections on all the computers stopped working. I have so far been able to get the G4 Power PC to print, but none of the others. I have tried Bonjour, Gimp-print v.5.0.0-beta 2, cleared all the print drivers and restarted, and everything else I have been able to find on both Epson and Apple sites. The Printer Set Utility described by Epson does not exist in Leopard machines, and doesn't work for the older laptops. As soon as I select one of the printers in the "selected printer in print dialogue box" it grays out. I have set up sharing on the G4Power PC that does print, but it is not accessible--it shows up but is grayed out. There is a diamond next to the printers in the Print dialogue box in applications' menus, but it still doesn't work. It either cannot make the connection, cannot find the printer, or keeps spinning with the message that it is finishing printing (but it hasn't even started.) Again, everything worked fine until the new iPhone was added to the mix. My old iPhone didn't cause any problems. This is really a problem. Any suggestions welcome.

Lotus Traveler Address Encoding for Apple Devices Problems with Z10

Hi,
we have problems with the Lotus Traveler Address Encoding for Apple Devices IBM Notes and Domino wiki
We are running Traveler 9.0 with BES 10.1 and 10.1.0.2354 on the Z10.
When composing a new mail addresses from our Domino NAB are shown like this: [email protected] instead of the name. It seems to me that name search is first looking to the Internet address field in the Domino NAB. In our case this field is empty (and cannot be filled with an address). If the field is empty, the User name or the Short name field seems to be used. This fields are filled with Domino like names like John Doe/City/Company. The Traveler Server will convert these names (see link above) and the Device (Z10) should only show the common name instead of the converted name.
This is not working on our Z10s. The converted name is always shown like [email protected] and you don't know the real name.
Is the problem known? Any workarounds?
Edit: Further investigations have shown that the conversion works if you use an address in the mailbox the first time. If you use it later again, it is coming unconverted from the address chache. Also if you perform a remote search from the contacts app the converted name instead of the common name is shown.
Regards
Nico

Hi Friend,
While your idevices still having apps downloaded by the old Apple ID, Apple Store will ask you for the old Apple ID and password to updated them. But, if you delete all apps downloaded by the old Apple ID, then download again by the new Apple ID, Apple Store will not ask you anymore for the old one.
Hope it helps

Wireless printing problems with Asus router RT-N56U and HP8500

Neew MacBookPro with Lion. Also have HP 8500a 909a printer hooked up to an Asus router RT-N56U Google search indicates MANY problems with HP printers being used with wireless Mac, even with Airport. Of course we know HP is one of the worse customer support companies on earth,, so I came here in hopes to find a solution. I updated my mac and firmware for router. The Mac doesn't find any printers wirelessly at all. If I hook up with a cable it works fine.. Thanks

I own the RT-N56U (best router on the market hands-down), along with an HP LaserJet 1320, however it's connected via USB to my computer instead of the router. While it's true that HP don't have a terrific support record for Mac drivers in fairness it may be the Asus router causing the problem; if you Google "Asus RT-N56U" and "mac os x print server", you'll find complaints similar to yours from other users. From what I understand this is partly dependent on your printer and whether it supports network printing, and partly on compliance with the Asus router firmware. I Googled what appears to be a possible solution to configuring the Asus print server, however I haven't yet tested this myself:
http://forums.techarena.in/networking-security/1424669.htm#post5384770

Wireless connection problems with iTunes

After installing iTunes for my PC(using Windows Vista if that matters). Directly after installing iTunes my wireless connection works. Once I start importing my music into iTunes I lose my wireless connection. I can still see the wireless networks but I can no longer connect to any of them.
Does anyone know whats causing this problem. Once I deleted iTunes from my computer my networks started working properly again after rebooting. I tried to download it again and the same thing happened yet again. After deleting agin I am still unable to connect to my wireless conection.

I just saw your post and I resolved this on mine for my wired connection. I'm willing to bet that the issue is the same for wireless. Here's what I found.
Issue:
During the installation, iTunes installs some network components related to mobile device support over ethernet(Apple Mobile Device Ethernet Service - netaapl.inf). At the same time, according the logs, the install process removed OEM18.inf. This almost exactly coincided with the time that I saw the network connection die (preceded it by a few seconds).
Basically, iTunes appears to be removing a required network component.
Resolution:
After installing iTunes and the network connection breaking, remove the network device from Device Manager and allow Windows to reinstall it automatically.
The following instructions are for Windows 7, but they are close enough to follow for other versions of Windows.
1. Click the Start button (Jewel in Vista and Win7).
2. Right-click Computer and click Manage in the menu that appears (type your password or click Yes if prompted).
3. On the left side of hte Computer Management window, click Device Manager.
4. Click the arrow (or plus sign) next to Network Adapters to expand that section.
5. Right-click your network adapter and click Uninstall in the menu that appears.
6. Click OK.
7. Reboot.
Windows should automatically detect and reinstall your network device on boot.

Wireless Networks Problems with Xbox - Airport express

Hi Hope someone can help
Wireless setup & Hardware
I have a PC running XP and the wireless Router is connected directly with RJ45 cable into the Netgear DG834GT
I have a iMac G5 which has no problems getting onto the wireless network
I have a Airport Express unit where all my music is streamed into another room and that works fine, but my problem is I cannot get the xbox I have just purchased to work ie (xbox Live etc) which is attached with RJ45 cable direct to Airport Express.
I have installed lastest firmware for all devices, ie Airport Express, DG834GT
My Wireless Security settings have been set to WPA-PSK (Wi-Fi protected access pre shared key) I must admit I tried to set WEP security at first but had no Luck, so I don't know if I've done right thing
When I look at attached devices on router software it shows me correctly that there are 3 computers on network I can view IP address and MAC address
My Question is should the Xbox work ok with my setup?
Should the Xbox not get all network infomation automatic
Do I need to manual set the xbox with Network settings?
Or am I missing something, any help would be Great

Hello,
I don't know if this link will help but, give it a shot. I have the same setup as you but, I have a PS2 instead. I believe you have to manually adjust some settings on the XBox.
http://compnetworking.about.com/od/wifihomenetworking/ht/xbox2wifirouter.htm
Jason
iMac G5 (iSight) Mac OS X (10.4.5) 12' Powerbook, 5G iPod

HP Wireless Printing - problems with MAcbook Airport

I've read through most of the problems related to printers on here and I think I have a unique one!!
I've just bought and installed a HP C8180 all-in-one printer. Installed as per instructions - on home network and across ethernet. I've reserved an IP address for it so its always in the same place. Works brilliantly (good printer!). However if I then disconnect ethernet and connect to my network via airport - it won't print! It will however, align, print test page (albeit slowly), clean cartridges etc - but no printing.
If I disconnect from Airport and reconnect to ethernet - no problems it prints fine. If I then connect via airport (keeping the ethernet connection at the top of the list) it works fine. If however airport is top of the list - it won't print.
Prints fine on USB too.
So I've deduced that for some reason its the Apple Macbook wireless that's causing the problem.
So does anyone have a solution - 'cause this is driving me nuts!
Thanks in advance.

I have a HP Photosmart 2710 All in One connected to a Aiport Express USB port, it works great, the WIFI in the printer doesn't work because it doesn't support WPA2 so I disabled it. The main router is quite a ways away but I still want to print to the printer wirelessly.
My suggestion:
1. Connect the printer via USB directly to macbook to load and test driver.
2. Use Airport Utility and configure Airport for printer, if it is already listed, remove and reinstall it.
3. On your Macbook it should change the driver from USB to the name of Airport, sometimes it helps to turn off the printer and turn it back on while connected to Airport.
Keep messing with it, it can be stubborn with Bonjour but it finally shows up. Make sure the Airport Utility can see the printer when connected to it.

HP Deskjet 3050A wireless printing problem with Macbook Air

Hello, I have a HP Deskjet 3050A printer that I have been using with my MacBook Air (2012 OS X 10.8.3) until a few weeks ago when it seemed to hang when trying to print and then say no printer found (even though it showed and was selected in the Printer options). So after a few weeks of this I decided to to remedy this issue once and for all by deleting the printer and 'refinding' it.
However, upon 'refinding' printer by adding it through System Preferences no printer is found - I have updated all Macbook air software.
All this time I have been able to continue printing wirelessly using my iPhone 4S and have changed no settings to the iPhone or 3050A which leads me to believe the proble the problem may lie with the Macbook Air?
Can you help resolving this please? Thanks

What router are you using? Have you restarted it by pulling its power plug momentarily?
If that does not work, download and install this: http://support.apple.com/kb/DL907
Restart your Mac.
Finally, reset the printing system:
- Go to System Preferences > Print & Scan
- Right (or control) click in the rectangle listing your printers and select Reset Printing System.
WARNING - this will delete ALL of your printers!
- Select the plus sign to re-add a printer. Select the Defualt tab on the top of the window. Look for the printer, select it and then next to the "Use" pulldown, select the printer model (not AirPrint). Wait until the "Add" button becomes available. Click it.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

802.1X wireless network problems with Intel Mac

To login to the wireless network at my school I have to use an 802.1X connection authenticating with TTLS, TLS, EAP-FAST and PEAP protocols.
This works intermitently. Some days my MacBook logs on quickly with no problems at all but most days it has a self assigned IP address and I can't use the internet. My friend also uses a MacBook, which acts in the same way. Some days she manages to get on, some days I can get on and some days we are both on together. The problem is really irritating!! We get no support from the techs as we are the only Mac people in the school. The rest of the staff have PCs. The techs are just trying to use this issue to justify why letting people lease Macs is a problem and stop other staff from leasing them in the future.
I did find a solution at
http://discussions.apple.com/thread.jspa?threadID=425113&tstart=0
but this was written in 2006 and I wonderered if this was still valid.
Can anyone help? please???

I am a tech at our school and we have the same problems. still trying to find a permanent solution!
If you turn airport off, then turn on again, (from system prefs > network) does it change from "self-assigned IP Address" to "Authenticated via PEAP)?
the macs are more and more popular at our school, so its becoming more and more of an issue.
cheers,
Harry

WRE54G wireless extender problem with WRT600N wireless router

My Vista laptops work fine with the WRT600N router but not with the WRE54G extender. On the other hand my XP laptop works fine with the wireless extender so I know that both router and extender are working. Linksys tech support told me that the WRE54G is not compatible with the WRT600N, which is simply not true. With my XP laptop the signal goes from poor (5-10 Mbps) without the extender to excellent (54 Mbps) with the extender. Also, the lower blue light on the extender blinks indicating data transmission. I can access the setup page of the extender only with the XP laptop and wired desktop computers but not the Vista laptops. I suspect there is a Vista network setting that is the problem. I've turned off the firewall but to no avail. I've also switched between mixed mode and G-only, which made no difference. Anybody have any suggestions?

pfl wrote:
I have a secure wireless network (WPA). Perhaps my 4-5 year old XP laptop is the only laptop on the planet that works with the WRE54G-WRT600N combination. But I can assure all the doubters that this laptop categorically works flawlessly when I would otherwise be out of range without an extender. Good luck to spalaw. Please let me know if you are get your WRT160n to work with the WRE54G, especially you're able to connect with a Vista laptop.
Hi
I am Afraid and wont be surprised if ya all people are nt able to use a N series Router with a G series Range Expander !
the Reasons is simple - N series is not BackWard Compatible as u check out the sources around. (Back Ward Compatible means compatible with the previous versions for its wireless Band , e:g - G band and B band.)
as far as my experience is concerned regarding the Range Expanders , me and my bud wasted a whole Week Configuring a WRT350N and WRE54G v3 , and it worked somehow on the seventh day for an hour and Lost the connection again! Dayumm !
and we tried setting up with the same expander with WRT54GS v7.2 , it worked like a charm.
Conclusion : " WRE54G is a g series 2.4 Ghz expander which will work fine with all g series router though may not work with N Serious routers."
and if you really wish to Use something which can actually Extend the range for ur N routers signals , Better go for WAP4400N !!!!!!
And if someone still wish to run around , wanna try some tweaks (which i dont preferr )!
for WRT600N , just enable 2.4ghz band . as Range expander doesnt support 5 Mhz.
Use Only standard Channels . e.g : 1,9,3,11 .(No Wide and stuff.)
Try using WEP encryption first . (cause thats how we made WRT350N worked for a while. sighs)
At last , Wish u Luck.
Pe@c3
"What u Give , is wht u better start expecting to take back".. - http://Forsakenbliss.wordpress.com

Windows 7 Wireless Logon - Problems with 802.1X Machine & User Authentication

Hello All,
We’ve had difficulty with our Windows 7 clients authenticating to our wireless network. I’m hoping someone out there has experienced the same thing and can offer some help.
Some info about our environment:
Single Windows 2008 R2 domain with 6 DCs
MS Radius server
Aruba wireless controllers
The Problem:
The client computer boots,
Auths as machine (802.1X successful)
User enters creds
User auth (802.1X successful)
To this point, everything is working normally. Next is where it gets weird.
During the logon process, there is another machine auth
2-5 minutes later another User auth
OS is up and usable (connected to wireless network); however, no homefolder is mapped and GPP didn’t apply properly.
From what I understand, after the user has logged in, Windows never attempts another machine authentication. When the user logs out, Windows can attempt it.
Can anyone offer some insight to what is causing this? I have logs available if anyone is interested.
Thanks in advance for any help you can offer!
Brett
-- Brett

I did a network trace to gain more insight. I don’t understand why after 802.1X auth is successful on port 1, it then initiates 802.1X auth on port 2.
Can you offer any insight?
10487    3:50:19 PM 8/23/2012    63.0340126
ONEX_MicrosoftWindowsOneX                ONEX_MicrosoftWindowsOneX:Port(1 (0x1)): Authentication Starting   {ONEX_MicrosoftWindowsOneX:126, NetEvent:5}
10867    3:50:19 PM 8/23/2012    63.3403904
ONEX_MicrosoftWindowsOneX                ONEX_MicrosoftWindowsOneX:Port(1 (0x1)): Time taken for this authentication = 281 (0x119) ms
{ONEX_MicrosoftWindowsOneX:126, NetEvent:5}
Then >>>
11718    3:50:35 PM 8/23/2012    79.3196653
ONEX_MicrosoftWindowsOneX                ONEX_MicrosoftWindowsOneX:OneXDestroySupplicantPort     {ONEX_MicrosoftWindowsOneX:126, NetEvent:5}
11938    3:50:36 PM 8/23/2012    80.0530315
ONEX_MicrosoftWindowsOneX                ONEX_MicrosoftWindowsOneX:Finished initializing a new port with id=2 (0x2) and friendly name=Dell Wireless 1504 802.11b/g/n (2.4GHz)
{ONEX_MicrosoftWindowsOneX:126, NetEvent:5}
11959    3:50:36 PM 8/23/2012    80.0556734
ONEX_MicrosoftWindowsOneX                ONEX_MicrosoftWindowsOneX:OneXStartAuthentication           {ONEX_MicrosoftWindowsOneX:126,
NetEvent:5}
11964 3:50:36 PM 8/23/2012
80.0557074 svchost.exe (1036)
ONEX_MicrosoftWindowsOneX ONEX_MicrosoftWindowsOneX:Port(2 (0x2)): Starting a new 802.1X authentication (MSM initiated)
11965 3:50:36 PM 8/23/2012
80.0557333 svchost.exe (1036)
ONEX_MicrosoftWindowsOneX ONEX_MicrosoftWindowsOneX:Port(2 (0x2)): Authentication Starting
-- Brett

Rapoo Headset Wireless device problem with S205 ideapad

Similar Messages

Maybe you are looking for