RAPOST2000 error handling depreciation test run

I have a problem with the error handling in ECC 6.0 (RAPOST2000). when I run a test run in foreground, the error list is diplayed nicely and i can doble click to see the problem for each asset. But as we have more than 1000 assets we have to run the test run in background, resulting that the error list is placed in the spool without the possibility to drill down to the problem per asset (only the error no displayed in the list). How to proceed to get a smooth way of handling errors without to use two lists ( first the errors per asset, and then the list explaining the error).

Yes, the "Error Analaysis" indicator was ticked when starting the depreciation test run. So, that does not solve the problem having to match 2 different list/reports to analyze/correct the errors.
Regards

Similar Messages

  • Tax code error in Depreciation Test run

    Hello
    Can anybody help me understand how I can get round the following:
    I am doing a test depreciation run, but against all the assets there is the same error, 'Tax code ** does not exist for jurisdiction code ****'.  I do not wish to maintain the tax code for this jurisdiction code, but how do I get round this.  Is there a setting somewhere I have missed?
    Any advice is appreciated.  Thanks

    The Input and Output Tax has to be specified in FTXP, then go to T.code: OBCL then allocate the Input and output tax code to the company code and save.

  • Error in afab test run in background - very urgent

    Friends
    I have a problem with one of my clients.
    Depreciation ( AFAB) has been run in test mode in foreground. - Run without errors( Successfully)
    The same has run in back ground ( TEST MODE), we are getting errors? ( There are no changes of master data)
    Regards
    HARIKISHAN

    can u please clarifly this error is before removing test run and executing the deprecaition run in background or
    after removing test run and execting the run in background.
    If it is after than take the asset which is showing error and for that assets in afabn run the repeat run. and check whether it is giving any errors.. if yes than go to error log and check it.. if not that
    again run the run in background.
    i hope it will solve ur problem
    sejal

  • Error in Depreciation Psoting Run

    Hi Gurus
    I am getting the problem during Depreciation posting in asset accounting
    In our Company code the fiscal year from Nov to Oct , so now the Fiscal year 2008 is over and fiscal year 2009 has started.
    In asset fiscal year change , we have clsoed fiscal year 2007 using Tcode AJAB and done new fiscal year change 2009 using Tcode AJRW
    The Company has one asset acquired in Sep 2008 ( Fiscal year 2008 ) for which depreciation is only planned but not posted
    Now when we are trying to post depreciation using Tcode AFAB and giving parameters
    1 . Fiscal Year 2008 and Posting period 11 or 12
    2.  Fiscal Year 2009 and Posting period 1
    In both cases we are getting error log as "You can only post in new year after closing the previous year"
    Please check for this and suggest how to rectify the error
    This is the high priority issue and needs to be resolved asap
    Suitable answer will be rewarded
    Thanks
    Jhanvi

    Hi,
    It looks like you have successfully carried out closing for Asset FY 2007. 
    You have problem now in posting depreciation for FY 2008.  But you have already performed a Fiscal Year Change.
    Think the following may work:
    a) First Undo the Year End Closing through TCode OAAQ.
    b) Then Run AFAB in an Unplanned Posting run with your last period for the FY 2008.  This will post Depreciation on the assets.
    c) Then you can close the Fiscal Year and do a Fiscal Year Change.
    Hope this helps.
    Award Points if found useful.

  • "Balance in transaction currency" Error in Depreciation Posting Run-AFAB

    Hi,
    We are having unit testing going on during ECC6.0 upgrade.I am getting following error while posting Asset Depreciation -AFAB.
    Balance in transaction currency
    Message no. F5702
    Diagnosis
    A balance has occurred in transaction currency 'AUD' with the following details:
    Exchange rate '00', amount '           467.00-' and currency key 'AUD'.
    The data in the transaction currency were transferred from the calling application.
    System Response
    Your data cannot be processed in FI.
    Procedure
    The error is probably in the calling application.
    Please advise what can be the reason of this issue.
    Thanks & Regards,
    Prince Kochhar

    Hi shiv,
    Kindly refer this threads,
    Balance in transaction currency
    Error : Balance in Transaction Currency
    Error F5702 Balance in transaction currency VF01
    Re: Balance in  Transaction Currency
    error in Balance in transaction currency
    Balance in transaction currency
    Thanks,
    Swamy H P

  • I am geeting the error in Test run.

    Dear Friends,
         i am getting this error
    Division by zero not performed
    Calculation rule    ZPPF/810          RTE=TSDIVI RTE-TSDIVP RTEKGENAU RTE
    When i am increasing the salary of the person.
    How should i handle this.
    kindly respond me asap.
    i am getting error in the test run.
    Regards,
    sai prasad.

    ya its solved.
    the main problem why i am getting the error when i am running payroll is that i dint not maintain some importent country specific infotypes properly. thats the reason its showing me errors.
    i maintained them properly and finally the error is resolved.
    Thanks once again to the reply from our friends.
    Regards,
    sai prasad

  • The build directory of the test run either does not exist or access permission is required.

    i am trying to run automated tests
    i follow the steps in the web but when i have 2 issues that does not solve
    1. i created console project and add build definition without drop folder and queue builds that success.
    2. i created C# unit test and add build definition and run it from VS and it worked and done what i want to do.
    3. i built lab with 1 machine and define the controller on this pc ( the machine in the lab is another pc)
    4. i created test suite with test cases and from vs 2013 i associated automation nethod that i created in 2.
    5. when i try to associate the builds for the test plan i have a PROBLEM(1):
    this happened every new build that i try to assign - all the builds appears after refresh and when i press assign to plan button
    a pop up shown with error : " The build that you selected for this plan no longer exist " but he chose it in build in use but there no work item under it - the list is empty even that there are 2 tests under this test suite.
    and than when i try to run the automated tests i have this PROBLEM(2):
    The build directory of the test run either does not exist or access permission is required. and the test failed.
    Please Help
    Roey

    Hi Rory,
    Thank you for posting in MSDN forum.
    According to the error message:
    (1) a pop up shown with error : " The build that you selected for this plan no longer exist "
    I tried to create a build definition without the drop folder location for unit test solution from the VS IDE, and then I try to select the Build in use option to add the Available builds, then click this Assign to plan. I found that I get same error message
    with yours like the following screen shot.
    However, when we try to create a build definition with drop folder location for this same unit test solution and then build successfully in the VS IDE.
    After you add the Available builds and then click this Assign to plan in the MTM, it work fine.
    Therefore, I assume that the issue is related to that you did not specify a build directory for automated test case. MTM need to know where is the drop location of the build building your tests.
    http://stackoverflow.com/questions/20033217/couldnt-run-my-test-using-microsoft-test-manager
    In addition, I did some research about the problem 2:"The build directory of the test run either does not exist or access permission is required. and the test failed."
    I know that the error message occur in either of the following conditions:
    1. The account under which test controller is running does not have read permission on the build directory. (The build directory is same as the drop location of build associated with this test run.) 
    2. The build directory itself does not exist.
    So please refer the following blog to check this issue:
    http://blogs.msdn.com/b/aseemb/archive/2009/11/25/error-starting-the-test-run-build-directory-of-the-test-run-is-not-specified-or-does-not-exist.aspx
    Therefore, I suggest you can try to specify a drop location for build when you run the automated test from the MTM and then check this issue.
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • AFAB - Depreciation Posting Run Error

    When I tried to execute the Depreciation Posting Run, I get the error message "Internal error with background job scheduling RAPOST2000"
    Hv anyone face this problem before? Pls help!
    Thanks.

    Thanks~ I checked with my colleague, he told me that the user is lost few objects in the role. This included the User Authority and the program objects.
    After he added the objects to the user's role. The issue is settle.
    Thanks~!

  • Error in depreciation run - assets under construction

    Hi!
    Could someone please help me with the following:
    My customer has a large amount of assets under construction (AuC) and also other assets. None of the assets under consctruction should have a depreciation key (or depreciation key 0000) and no depreciation accounts are allocated in transaction AO93 for AuC . But my customer now has incorrectly created a few AuC (that should NOT be depreciated at all) with depreciation key LINK. What happened?
    1) Test run depreciation (AFAB) for all assets in period 1 during 2010. In test run no error log was created, everything looked fine.
    2) Executed depreciation in background.
    3) When looking at each of the assets in transaction AW01N I can see that all assets (both real assets and AuC with depreciation key) has depreciation posted in period 1. BUT, no depreciation has been posted in general ledger on any of the asset classes!
    4) I have now changed the depreciation key on all AUC in AS02 to 0000 so that no depreciation will be calculated.
    5) Trying to run AFAB again for period 2 but error message says that period 1 was terminated and that period 1 should be restarted.
    6) Trying to run period 1 again in AFAB with restart but error message says "Account 'Acc.dep. accnt.for ordinary depreciation' could not be found for area 01" and refering to all of the incorrect AuC that I have corrected (to no depreciation key)
    Please how can I go on? I want to reverse the depreciation in period 1 since I didn't get any posting i the general ledger. And then I want to make a new depreciation run only with correct assets (only depreciation on real assets, not on AuC).
    Please help!
    I am very thankful for any help!
    Many many thanks in advance!

    Hi, Can you please how the issue is solved because i have the same problem which i need to resolve immediately. Please reply me as soon as possible
    with regards,
    Prabhakar

  • Error when run Depreciation Posting Run AFAB

    Hi,
    I found error when run Depreciation Posting Run for period 7 2007.
    FYI. I had run Unplanned Depreciation (TCode: ABAA) with document date 31.10.2007 and posting date 31.10.2007, trans. type 640. After that, i want to run Depreciation Posting Run (TCode: AFAB) with fiscal year: 2008, posting period: 7, reason for posting run: repeat. Select on Test Run. Then i found error message as below. 
    Error Message:
    Documents manually posted within dep.doc.number range
    Message no. AA728
    Diagnosis
    In the number range interval for the document type for posting depreciation, a document  has been posted which was not created within the framework of depreciation posting. The last document posted by depreciation posting was assigned the number .
    Procedure
    Contact your Systems Specialist. When changing the number range interval for the document type in depreciation posting, you have to specify a new interval in which no documents exist. Using organizational measures, you can guarantee that there are no documents apart from those created by depreciation posting in this number range.
    Can any one help how to solve this issue?

    Hi Paul,
    Now I go to TCode: FBN1 - Accounting Document Number Ranges, then i want to change the range for year 2008.
    No Year  From No          To No           Current No          Ext
    03  2001   0300000000   0399999999   -                          /
    03  2002   0300000000   0399999999   -                          /
    03  2003   0300000000   0399999999   -                          /
    03  2004   0300000000   0399999999   -                          /
    03  2005   0300000000   0399999999   -                          /
    03  2006   0300000000   0399999999   -                          /
    03  2007   0300000000   0399999999   -                          /
    03  2008   0300000000   0399999999   -                          /
    03  2009   0300000000   0399999999   -                          /
    Referring back to Asset Accounting, the Reference Document: 19.
    Do it mean that my FI doc. no is 0300000019 ? I bit confuse on this..
    Can you guide me more details on it?
    Thanks in advance.
    Edited by: Nur Aman Abdul Manap on Apr 15, 2009 2:09 AM

  • Asset   Depreciation -  In test Run Value got posted

    Hi All ,
    1. I did the test run in 'AFAB'  . SAP throwed the error becasue of some problem in Cost Center.
    2. So i fixed that bug and tried again .  
    3. But when i see the Asset Explorer  for that asset '1234',  Asset value of the Error Doc got posted in 'Test Run'. How can i able to reverse back that asset value which got posted.
    I want to know, why it got posted eventhough i selected the " Test Run ".
    I want to reverse back that posted value . (onlyError Doc got posted). Or I want to do the depreciation without this asset number '1234'. How can i block that asset number for not to perform the depreciation.
    Kindly advice Pls.
    Thanks.
    Vivek.
    Message was edited by:
            vivek mohan

    Hi Vivek,
    In my experience,
    - If you selected "Test Run" then it should be not posted value. So I think there was an accident.
    - You cannot reverse depreciation which has been posted.
    - If depreciation for asset no : "1234" has been posted , let say in period 11, then when you repeat the depreciation for period 11, system will not post duplicate value. So here are what you have to do :
    1. Run AFAB using parameter Reason for Posting Run = "REPEAT RUN". Please tick "TEST RUN"
    2. Check wether asset "1234" will be posted again ( See in Column "Amount to be posted").
    3. If you're okay with the result then execute AFAB again but now, untick the "TEST RUN".
    Hope this helps.

  • Depreciation Posting Run Error

    i'm trying to run depreciation posting for company code X from AFAB. but during test run i got the following error message;
    "Field Bus. Area is a required field for G/L account MEYA 2572530000"
    however all asset's "field area" are filled by a value. what may cause this problem.
    thank you for your help

    hi,
    pls make  business area as a optional in the field status variant by using t.code obc4
    Thanks
    phaneendra

  • Profit Center blocked error in depreciation run

    We are upgrading SAP system from 4.6 to 6.0. It was noticed that Profit Center blocked error is being captured in depreciation run test run in the upgraded version. In 4.6, this error is not being captured. Is this an enhancement in the upgraded version?

    I have not search information about it. I found this change only positive. Now you have direct to solve the error (wrong profit center) and not later with the retirement. It is only when they block profit centers or assign an other profit center to a cost center that they have to contact asset accounting for changing the asset. In the old version the values on the profit center where wrong, now you have to correct them. I see this more as a bug in the old version that is solved now.
    When you don't want this have a look to the error message and turn it of when that is possible, but then you accept that the vallues in profit center accounting are wrong

  • Break execution after custom run-time error handler callback

    I am using Teststand 2010 SP1 and have written a custom runtime error handler based on the ErrorHandlerExample example that ships with TestStand. It has been implemented as a StationPostStepRuntimeError callback in my Station Callbacks folder.  I have modified the example as follows:
    (1) Added code to turn off the UUT transmitter if it was on.
    (2) Added a call to an executable that sends an email to the currently logged in user.
    (3) Calls the standard TestStand run-time error dialog using the Engine DisplayRunTimeErrorDialog method.
    (4) Processes the user's selection, then turns on the UUT transmitter for any option other then Abort.
    The callback also checks the status of the Break and "Don't Show again for this execution" options selected by the user.  If the user selects Break then the only option I can find is to call the API Execution.Break() method which breaks the execution right there in my callback. The user then has to single step there way out of the callback.   Is there a way of instructing TestStand to complete the callback execution and break immediately after completing the callback (i.e.at the step following the error)?  I've zipped up and attached my modified sequence.
    Alternatively, is there a better way of doing this?
    Regards,
    David
    Solved!
    Go to Solution.
    Attachments:
    StationCallbacks.7z ‏13 KB

    Didn't have a chance to try it yet but maybe StepOut is your solution?
    From the TS Help:
    StepOut Method
    Syntax
    Execution.StepOut
    Purpose
    Resumes the execution from a suspended state and then suspends the execution again after execution of the current sequence completes.
    jigg
    CTA, CLA
    teststandhelp.com
    ~Will work for kudos and/or BBQ~

  • Distribution Cycle KSV5 Resulting in error when deselected the test run chk

    Hi Experts,
    Please help me out
    iam getting an error while running a Distribution Cycle KSV5 Resulting in error when deselected the test run chk box.
    When run the same in the test run, there isn't any error log. but when i deselect the same & run iam getting an error like
    First Message:
    Balance per segment 9999 is not zero
    Message no. FAGL_COFI025
    Diagnosis
    Balance per segment 9999 is not zero.
    The balance on segment 9999 is 50.00 (transaction currency), 0.00 (object currency), and 50.00 (controlling area currency).
    System Response
    With the standard settings, postings cannot be made to the document because the balance for segment and partner segment does not amount to zero. This may be due to a programming error, or this setting may have been made (perhaps unintentionally) in the BAdIs for determining the segment or partner segment.
    Procedure
    If there is a programming error, please inform your system administrator.
    If this behavior is intentional, you can deactivate error message FAGL_COFI 025 in Customizing or change the error message into a warning message or an information message.
    2nd Message
    Balance per segment 1000 is not zero
    Message no. FAGL_COFI025
    Diagnosis
    Balance per segment 1000 is not zero.
    The balance on segment 1000 is 50.00- (transaction currency), 0.00 (object currency), and 50.00- (controlling area currency).
    System Response
    With the standard settings, postings cannot be made to the document because the balance for segment and partner segment does not amount to zero. This may be due to a programming error, or this setting may have been made (perhaps unintentionally) in the BAdIs for determining the segment or partner segment.
    Procedure
    If there is a programming error, please inform your system administrator.
    If this behavior is intentional, you can deactivate error message FAGL_COFI 025 in Customizing or change the error message into a warning message or an information message.
    3rd Message
    No update performed due to an error
    Message no. GA719
    Diagnosis
    A serious error occurred during processing.
    System Response
    Processing is continued as far as possible, but results are not posted.
    Procedure
    This error is shown in the error list before this error message. Here you can find more information about this particular error.
    I would appreciate an early reply........!!!
    Thanks & Regards,
    Neela

    Hi,
    Check notes 764652 and 897086; it might be helpful.
    Regards,
    Eli

Maybe you are looking for