Raq3 does not boot properly (please Help)

Ok ill cut to the problem to save your time...
I turn on the raq 3 at the power, then the switch on the raq its self then the cobalt sign (C) lights up but on the display screen all i get is the top line of the display screen with each square where letters should be just black squares and nothing on the bottom row.
This does not let me log into my raq3 or do anything with it. I have tried giving it a break by not using it but it has not worked can any 1 surgest anything that may/will help?
Thanks
Phil
Prefered method of reply: email: [email protected]

Public discussion forums aggressive frown on private email communications, because that denies others from learning about the issue that is being discussed.
Be that as it may...
Please see my response in this August 2006 posting:
http://forum.java.sun.com/thread.jspa?threadID=5104763

Similar Messages

Since upgrading to version 8.02 my iPad2 Safari does not work properly.please help

Since I upgraded to version 8.02 on my iPad2 Safari and Google Chrome do not work beyond displaying a series of websites.
When I want to enter a website they do not respond .
Can anyone tell me what I can do about this?

Try some basic troubleshooting:
(A) Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
(B) Try reset all settings
Settings>General>Reset>Reset All Settings
(C) Setup as new (data will be lost)
Settings>General>Reset>Erase all content and settings

My ipod touch does not work properly please help me get through this

My ipod touch (5th gen) dosent connect to itunes or app store or find my iphone even if i go to settings to logout and login it still dosent work can someone help me on this please

Never mind it worked now thanks

Freeze Frame Does Not Work Properly Please help

I have a sequence that will be cut into a master sequence consisting of six video tracks. When I invoke the Freeze Frame command, the resulting freeze frame only has the video from the bottom track (V1). This happens no matter where the playhead is when I select Freeze Frame. Even after rendering the sequence a Freeze Frame will only contain the video from the bottom track. Why???
FCP HD 4.5
Mac OS 10.3.9
QT 6.5.2
G4-500DP Mac OS X (10.3.9)

The Freeze Frame function targets the bottom most track with the AUTOSELECT button active. Autoselect is the gray box to the right of V1, V2, etc.
Are all your video tracks composited so that they are all visible at once? Then try nesting them, THEN making the freeze frame.
Shane
"There's no need to fear, UNDERDOG is here!"

Brand new Mac user help please! How do you connect a 17" monitor to the MacBook? I have the monitor plugged into the Mac, but the F8 that I am used to with PC does not work. Please help. Thanks.

Brand new Mac user help please! How do you connect a 17" monitor to the MacBook? I have the monitor plugged into the Mac, but the F8 that I am used to with PC does not work. Please help. I am getting lots of spelling errors as the MacBook laptop screen is too small. Thank you so much! .

Contentmom6 wrote:
Brand new Mac user help please! How do you connect a 17" monitor to the MacBook? I have the monitor plugged into the Mac, but the F8 that I am used to with PC does not work.
Normally, you just connect the monitor to the MacBook using a VGA adaptor that you can buy from an Apple Store. Now try System Preferences > Displays > Detect Displays. You should now be able to select a display mode for the monitor. If it still doesn't work, then I'd check that everything is properly connected. I've had problems with colours disappearing due to a faulty connection in the VGA adaptor.
Bob

I have updated itunes and the newest software. My home button does not work. Please help

I have updated itunes and the newest software. My home button does not work. Please help

It could be that your button has justy gone out. You may try getting compressed air to blow out any dust in there. If that doesn't work, you may have to get your button and ribbon replaced.

My mac camera does not work ! please help i need my camera for an interview !

my mac camera does not work ! please help i need my camera for an interview !

CLICKY CLICK---> http://support.apple.com/kb/HT2090 How to Troubleshoot iSight

I cannot send some emails, I can reply but I cannot start an email, an error comes up in outbox stating 'does not allow relaying' please help?

I cannot send some emails, I can reply but I cannot start an email, an error comes up in outbox stating 'does not allow relaying' please help?

Try going into Settings > Mail, Contacts, Calendars > select the account > account name , tap on SMTP (under the 'Outgoing Mail Server' heading) and then tap on your Primary Server and try entering your email account and password and see if it then works

I use macbook and lion os. I want to sync gmail contact with address book. For this i goto preference in address book and select "sync with google". I put my gmail details. However, the sync does not happen. Please help.

i use macbook and lion os 10.7.2.
I want to sync gmail contact with address book.
For this i goto preference in address book and select "sync with google".
I put my gmail details.
However, the sync does not happen.
Please help.

You should have signed in with that address in the first place, but there is a workaround: go to System preferences>Mail, Contacts@ Calendars and add your @me.com address as an account there.

I cannot sync Xerox M138 with my Macbook Air. Printing is paused and does not resume. Please Help, I cannot sync Xerox M138 with my Macbook Air. Printing is paused and does not resume. Please Help

I cannot sync Xerox M138 Printer with my Macbook Air. Printing is paused and does not resume. Please Help.

I FIXED IT MYSELF.
I simply let the iPod run out of battery.
Then it said CONNECT TO POWER.
And then I did.
And after 15 minutes, it worked!
Self-solved problem!

New system does not boot properly

I just set up a new system with:
a MS-6728 Neo2 FIS2R Mobo,
1gb Geil PC-3500 RAM (2x512),
2.6C proc.
2 Maxtor 120gb IDE drives RAID 0 with the onboard promise controller.
Lite-On DVD burner
ATI radeon 9800 video card
Enermax 300 watt power supply with:
3.3v - 28amp
5v - 30amp
12v 22amp
170watt total 3.3/5 combined
My problem is that my system NEVER boots up normally. It always freezes in the bios startup. The D-bracket stops at almost every possible combination of led's, which according to the manual the problems were: Testing RTC, Initialize Video interface, Testing memory, Initializing floppy controller, Memory detection, Decompressing bios to ram, possibly more. Sometimes I also just get beeping, either a continuous beep or 8 beeps. A few times it would display the bios startup screen, but halfway down would be gibberish characters and would be locked up. When I then turn the computer off then on again, the bios is reset at least somewhat(i know because I usually disable the full screen image on startup) and says memory timings are too tight, and I have the choice to enter bios or hit any key to automatically fix things. If I hit any key it will boot up ok. However when I restart/turn off the computer, the next time it again does not boot. I tried upping the ram voltages from 2.5-2.9v, and that seems to stay that way in the bios, even when it resets itself. Everything else is set to auto/slow. If I try to manually adjust the memory timings, even to the slowest possible settings, it does not boot, and I must turn it on/off a few times till the bios resets again, with the boot process stopping at one of the possiblilitys mentioned above. Using the info tab on speedfan, I got the memory info, and it displayed the voltage at 2.5v, not sure what that means but it is strange.
What I have already attempted:
I sent back the ram and got a new set, which hasn't changed anything. The first time the other ram failed memtest, this time it passed(for about 2 hrs). So I don't think its the ram.
I borrowed an antec truepower 430w powersupply, which had no effect.
I went back to bios version 1.3 from 1.9, which also seems to have no effect.
I was hoping to overclock the system a bit and enable performance mode etc etc, but now I'll be happy to just not have to go through a song and dance everytime I restart the computer. This is only the second computer I have built from scratch, and the first with raid, but that seemed to all go ok. Please help me diagnose the problem!

I too am having problems with my system.
865PE Neo2-FIS2R
2 Maxtor 120GB S-ATA drives, RAID 0, Promise
2 512MB Geil Ultra CL2-3-3-6
HP CD-RW
What IDE settings are you using?
E.g...Native? P-ATA Only...all of those settings
For me...sometimes XP will install and boot...but eventually system is unstable and XP crashes and corrupts itself...Event Manager errors different each time
Someone mentioned problems with Maxtor and AMI BIOS...anything I should keep in mind?
Sorry about all the different questions. I'm sure exactly where my problem lies. MSI thinks it may be my memory AND/OR on-board IDE controller since I can't get the on-board Intel RAID setup to consistently "see" and setup my RAID drives...even when it has worked...XP doesn't like the Intel configured RAID drives. Also tried just one S-ATA drive through on-board Intel and Promise. Next I will try a plain old IDE Hard Drive...no S-ATA...and make sure my memory passes memtest86+ testing.
Any other gems you can offer for this config??? Thanks.

My adobe acrobat 7.0 professional keeps telling me that i have to activate - I cannot do this as the information to the web site does not work. please help

my adobe acrobat 7.0 professional keeps telling me that i have to activate - I cannot do this as the information to the web site does not work. please help

Activation no longer works. A replacement download and serial number are available Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3

I have downloaded and installed Photoshop Elements 12 on Windows7. It does not work properly. Help?

I downloaded Photoshop Elements 12 to work on my new platform Windows 7. It does not work properly. Specifically my problem is that I can only load one picture at a time onto the work area even if I have chosen two separate pictures. In other words I can not cut and paste not can I join pictures together.
If I load the program on my older computer with WindowsXP it works fine.
Any suggestions would be appreciated.

You have probably forgotten. In recent versions of PSE you must go to the edit>preferences>general and turn on Allow Floating Documents.

Help! Computer turns on but then will not boot up - Please Help!

I have no idea what happened to my Apple. Someone please help me. My powerbook currently is running on no battery (recall victim) and now the entire computer is no longer functioning at all. I installed iTunes 7.0 and then the trouble began. I had to restart the computer, so I did that and then the computer just wont boot up. It goes to the grey screen which shows the Apple symbol and occurs right before my log in then just continues to read. The green light for the battery is function and nothing at all is working. The computer simply will not boot up, I have tried unplugging it for the night and then rebooting it and nothing. Please someone help, what has went wrong?

You mentioned in your other thread that you had trouble with a cpu(0) hardware error trying to use the hardware test disk. Is this the hardware test disk which came with that particular machine? If not, then you need to find the original hardware test disk that came with that machine. If the restore disks that say 12" Powerbook include the words hardware test, use those instead and follow these directions:
http://docs.info.apple.com/article.html?artnum=86287
If you are using the correct hardware test disk and you get a cpu(0) error using it, then the machine has a hardware problem.

HT201263 my iphone 4 switched off on 70% battery and now wont switch on? also my home button does not work?please help

My iphone 4 suddenly switched off on 70% battery and now it wont switch back on? my home button does not work either so i can not do the normal reset please help!!

Sophierose21 wrote:
my home button does not work
Then it looks like a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is required... Be sure to make an appointment first...

Raq3 does not boot properly (please Help)

Similar Messages

Maybe you are looking for