RAR - management view - Role Analysis diagram shows zero

Hello,
we were able to run the Full Sync for role/user/role and Batch Risk Analysis user/Role/Profile and Critical Acess to completion successfully.
In the Informer tab, Managerment View, the risk Violations and Users Analysis shows reasonable figures. However the Role Analysis , it shows zeros for the risk violations and risk violations for user and roles.
Could someone point out where is likely the problem so i could go and check ?
Thanks
CL

Hi Lee,
Have you run Management Report Job as well?
Regards,
Sabita

Similar Messages

  • GRC-AC 5.3 RAR Management view error - Expired users not cleaned-up.

    Hello Gurus,
    I have a problem in RAR Management View:  Users who was valid have been analyzed and their conflicts considered in statistics, but when they become expired, their conflicts remain in the statistics forever, because they are not re-analyzed neither in Full nor in Incremental sync.    Even if all roles are removed from the user in backend, the conflicts remain in Management View.
    I think the Full Batch Risk Analysis should clean-up all users violations from current period statistics before recording the new analysis results. 
    Did you have this problem too?  Am I missing something? 
    I appreciate your thoughts about it.
    Vaner

    Hello Nuno,
    Thanks for your comments.
    My release is 5.3 SP 16.2.
    I also think the full sync should be enough but I already find about 20 users with problems, in 4 different backend and in 2 GRC (Tests and Production)
    I think that depending on some procedures done in the back-end the full sync do neither re-analyze the user nor clean-up previuos statistics, for example:
    1. A user was delete and recreated again with option to maintain old data, and he already had expiration date.
    2. A sand-box environment was created as copy of production, users were created valid but already with expiration date.
    I observed that for these scenarios, there was no Change Document for field "valid to", my guess is that Full Sync process relies on Change Documents to do its job.
    I already opened a message in SAP for this, first level could not solve it, It is in Development Team now.
    Vaner

  • RAR Management view tables

    Hi Experts,
    We need to delete old logs for all sync jobs, batch risk analysis and management view data from RAR. Initially we had run all jobs for all roles but management requirement is that it should show only customer roles. Although we can anytime run new risk analysis but in managemnt view it will show old data also and comparison etc will be confusing to some users.
    Please suggest if there is any workaround to remove old data. If we need ot delete at table level, which tables data need ot be cleared to make sure no old data remains till date.
    Thanks in advance.
    Sabita

    Hi Chinmaya,
    Thank you so much for your reply.
    Are you going to upgrade to SAP GRC AC SP13 ( I am bit confused).
    Thanks in advance.
    Regards
    Poojagopal
    Edited by: POOJAGOPAL on Jun 3, 2011 8:20 PM

  • Management report - Role analysis

    Hi guys,
    So here's my issue, I inadvertently scheduled a role analysis without specifying the project roles which are about 200 +.  Thus, role analysis under the management report view constantly shows the  results of the analysis of about 2000 + roles which is a combination of both SAP delivered roles and project roles. Every subsequent batch and full syncs I've scheduled seemingly gets aggregated with the initial sync which has all the SAP delivered roles.
    Question.
    1. I understand I have to purge the database at the backend. The basis team strongly advices against this. Can I possibly purge the role analysis in the CC front end? What are my options here? I only want to see the role analysis of our 200 + project developed roles.

    Dear Adewale,
    I understand your requirement, please check the following.
    There are two ways to see Role based Risk Analysis, and both depends upon your requirements.
    1) Suppose, You have a requirement to see consolidated Role based Risk Analysis of a particular system. That means you want to generate a report for all the roles and want to see which roles are violating, mitigated, critical, high, medium and low in your system. For this you can go to Informer tab and generate Role based Risk Analysis Report.
    In this report the advantage is that you get a pie chart and bar graph. But you can not generate reports on the basis of some particular roles, because there is no such functionality provided in CC 5.2
    2) In other case if you wish to generate a Role based Risk Analysis report by specifying a condition like (z*), Here you also have option to select Report Type, risk Level etc  but yes, there is no functionality to see the result in graphs or charts in CC 5.2
    So in both ways your requirement to generate project roles risk analysis report in graph format can not be achieved. For this you only have two options.
    1. Raise an enhancement request to SAP Support.
    2. To go with the second option mentioned above, select report type to be management summary and export the results to excel and generate graphs manually.
    I understand this is painful.
    Best Regards,
    Amol Bharti

  • Role Analysis in RAR informer tab - reg

    Hi
    We are facing the following issues
    A) In the RAR 5.3, Informer tab > Management view > Role analysis > SOD section - against field 
        Month /Year , No values are determined in the drop down
    B) Further, No data is displayed after selecting button 'Go' in the SOD section  ( 0's are displayed)
    Thanks
    Ram

    HI Harleen & Alpesh
    As mentioned by you, the issue is due to the problem in running the background jobs.
    For this, I have followed the steps mentioned by Harleen in the below mentioned thread, after which the jobs are completed and i could able to get the data in the informer tab ( Risk/ Role/ User Analysis)
    GRC Access Control 5.3: Background Jobs in RAR don't start
    Thanks
    Ram

  • Number of Page View is showing zero for Site web Analytics Reports

    Hi,
    We have enabled Site Web Analytics reports in our Site Collection but the Number of Page views is showing zero for all the dates. We have checked all the events to capture in Site Collection Audit settings, Reporting feature is also activated but still the
    count shows 0 for all the dates.
    There are other Site Collection that exists under that Web Application but they show the count for Number of Page views in Site.
    Any help would be appreciated.
    Regards,
    Vijay

    hi
    1-first check "Usage and Health Data Collection Proxy" is started, if not started:
    find usage proxy id with following command:
    Get-SPServiceApplicationProxy
    then start service with following command:
    $UsageApp = Get-SPServiceApplicationProxy | Where {$_.ID -eq "[usage proxy ID]"}
    $UsageApp.Provision()
    2-check following link:
    Popularity Trends populating 0 results
    yaşamak bir eylemdir

  • Financial Management Application Roles to view HFM application

    Hi all,
    I have created new user for view the HFM application. Can anyone please mention what are all the Financial Management Application Roles to be given to the new user.
    Thanks in Advance,

    See if it helps how to migrate jazn-data.xml to system-jazn-data.xml.
    system-jazn-data.xml migration problem
    Also see this, http://andrejusb.blogspot.in/2010/05/migrating-security-policies-from.html

  • Ipod classic not allowing access to to music or pod casts - shows zero files in music and pod cast but used space shows 3/4 full it is recognized by itunes sometimes on my pc but unable to view content

    ipod classic shows disk 3/4 full  but when i look in the folders  it shows zero for music and zero for podscasts. i can not access these folders on the ipod or when it does connect to my windows computer thru itunes.  it does not connect 90% of the time now.  i let it check the disk when it was connected to my pc which did not good  -  any other ideas?  other than restore?

    Your iPod filesystem is corrupted, so your music and podcastr is in the Others, this is most likely caused by a slow USB connection, which timeout during sync.
    Try the Hard Reset first
    After charging till full charge, at least 2 hours (preferably 4 hours)
    Toggle the Hold switch, make sure you dont see the red mark when you do the  next step
    Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs or till the Apple Logo comes ON
    Then release the buttons
    Select your preferred language.
    Here is the Apple support Article on the 5Rs
    http://www.apple.com/support/ipod/five_rs/classic/
    Then do the iPod Disk Diagnostic, in this earlier post by tt2, it wont fix your problem, but help you decide if your iPod is dying and causing the timeouts.
    Have a nice day!

  • Mass Role Analysis on RAR

    Hello all, i would like to know if it is possible to get an analysis and report of all Z* Roles using risk analysis.
    It seems that i can just one by one get role analysis and report, so is there a way to get a mass role analysis for example all Z Roles?
    I appreciate your help.
    Thanks

    HI,
    In risk analysis role level screen,for line with role expend drop-down list by defauslt it is ---u have many options there choose--multiple and take your all z-roles into one notepad and save as UTF-8 and upload that file in this screen.
    And run the risk analysis at background and u will get the risk analysis result..
    Regards
    Ravikumar.ch

  • ERROR VIRSA CC 5.2 - Management View -User Analisys - NOT UPDATED!!!!!

    Hi ,
    i executed the JOB of SYNK of users,  the Job of RISK analysis and the JOB of update of management Report .
    When i go in - Management View - User Analisys -( i select date , System , User Group ) Virsa CC shows me the correct number of users actually in the system, for this user group , according to USR02 SAP table , BUT Users with NO Violations and Users With Violations are not correct.
    I show results:
    No. of Users Analyzed : 25                CORRECT
    Users with no Violations : 95 379%     NOT CORRECT
    Users with Violations : -70 -279%        NOT CORRECT
    The Interactive pie chart shows the correct number of users with violations : 2
    Who it' s possible ?
    BEST REGARDS
    Maurizio

    Abdul,
    You stated in your initial comment that the Management Report check box was NOT selected? If this is the case then the graphs on the informer tab have not been updated. You must first execute the SOD (user/role/profile) analysis, once that job is complete then execute a separate job for the management reports. This will then update the informer tab (given that your rule set has been updated with your custom functions and risks).

  • Update on Management View in VIRSA Compliance Calibrator 5.2

    Hello,
    is there a way to delete the Data for the Management View in VIRSA Compliance Calibrator 5.2 and then make a full new data load.
    When I select Full Synchronisation and Management Reports in the Schedule Analysis, the system does not update the Management View correctly, the Management Report shows still roles which are already deleted in the SAP-System.
    Thanks

    Hi,
         You can do a Full sync of Users and Roles first which will be ovewrite and then run the Batch Risk Analysis Management Reports.
          You can try this exercise first if it does not work then go ahead with Alpesh's advice.
    Thanks
    Darshan

  • CC 5.2 SP9 - Management view update problem

    Hello all,
    We are having trouble updating the management view, in CC SP09. After running full synchro jobs on profiles, then roles, then users, and finally updating the management view, the results seem wrong (in production, we were expecting about 50% of users with violations, while the management view did not see any)...
    Any help would be appreciated, thanks!
    Sophie Planchais

    I stole this from another thread but at least it saves me typing it all in
    Follow these instructions
    1. Full user synch
    2. Full role synch
    3. Full profile synch
    4. Batch risk analysis for users (full synch mode)
    5. Batch risk analysis for roles (full synch mode)
    6. Batch risk analysis for profiles (full synch mode)
    7. Batch risk analysis for critical actions (full synch mode)
    8. Management reports by itself.
    Wait for each job to complete before you run the next one.
    Sometimes I even run job 8 inbetween jobs 4-7, just to make sure.  In other words the job order is then 4, 8, 5, 8, 6, 8, 7, 8.  As I have had problems that job 8 will not finish (after 4, 5, 6, 7 have been run) which we surmise is due to too many changes being required.

  • Issue in creating dev plan in talent management specialist role

    Hi ,
    I am facing issue in creating development plan through talent management specialist role . Actually in one system I have 2 location one is india & another one is USA . its working for india but when I search india employee its show no employee found . can you please guide me
    Tarun

    Hi Luke ,
    According to one of your article , I run  HRALXSYNC in r/3 , in that all indian employee are green but USA employee in RED . I found following error , can you please guide me that what is mean by that ?
    The error occurred in program CL_HRRCF_INFOTYPE=============CM003 line 117
    Qualification 90007487 does not exist
    The incorrect HR object has the key 01NA90011026
    The incorrect infotype record is 40601NA900110265105    1  1900010199991231
    The error occurred in program CL_HRRCF_QUALIFICATION========CM001 line 69
    Serious error; see log
    The error occurred in program CL_HRRCF_CANDIDATE_INFOTYPE_BLCM00B line 99
    Serious error; see log
    The error occurred in program CL_HRRCF_INFOTYPE=============CM003 line 117
    Qualification 90007487 does not exist
    The incorrect HR object has the key 01NA90011026
    The incorrect infotype record is 40601NA900110265105    1  1900010199991231
    The error occurred in program CL_HRRCF_QUALIFICATION========CM001 line 69
    Serious error; see log
    The error occurred in program CL_HRRCF_CANDIDATE_INFOTYPE_BLCM00B line 99
    Thanks
    Tarun

  • Vendor code in Purchase order changed after invoice,net price showing zero.

    Dear Experts ,
    In one purchase order , user had done GR & invoice for a line item ( service ),item category "D" , and
    thereafter somehow the system allowed user to change the vendor code. The PO line is now having amounts in
    the sub-service line items , but net price for the line item is showing as zero. Since the PO was made
    directly without any contract/RFQ/PR , there is no reference document or info record shown against the line
    item.
    In the conditions tab of Item details,the condition for basic price is not seen & since there are no amounts
    applicable for the other conditions such as insurance , octroi etc., the NET price shown for the item is
    Zero, which is also getting printed in the PO as zero , which is not acceptable , as we can not send to the
    vendor PO copy having prices for individual services printed correctly but the total gross price showing
    zero.
    Pl advise what can be done so that Net Price is shown correctly & not zero.

    I think the new vendor is having a different pricing schema than the old vendor. Check the pricing schema for the old vendor (in purchasing view in field 'Schema Group. vendor) and compare it to the new vendor. I think they're different.
    If it is then what i think happening is the user already input the price for the condition type in pricing schema A, then the vendor is changed and the new pricing schema is kiciking in thus making the old condition type missing.
    Try to either:
    A. Change to the old vendor back,
    B. Change the pricing schema of the new vendor to be the same with old vendor

  • Usage Report Shows Zero (0) Hits

    All:
    When I view the Excel Usage report for my site collection as described here
    here, it shows zero hits.  Same for my top-level site page.  I've gone into Central Admin and confirmed the Usage and Health Data Collection service is running
    as described
    here and that it is properly configured.  Via PowerShell, I've also confirmed the EnableReceivers property is set to true as described
    here .
    Still no luck.  Nothing but 0 hits reported.   Any other suggestions on how I can get this working?
    Thanks,
    Bill
    Bill Davidson

    User analytics take 24 to generate data so check after 24 hours.
    Also hope you have followed
    http://sharepoint.stackexchange.com/questions/32858/web-analytic-show-0-visitor-since-last-2-weeks
    id you configure Usage Collection from the SharePoint Central Admin.
    Central Administration > Monitoring > Configure usage and health data collection
    Please ensure Enable usage data collection (is checked)
    Events to log:
    Content Import Usage
    Content Export Usage
    Page Requests (This option must be checked)
    Feature Use
    Search Query Usage
    Site Inventory Usage
    Timer Jobs
    Rating Usage
    After you enable Web Analytics , SharePoint automatically does not start making analytical data unless we specify data that needs to be captured and saved on the analytics service application database.
    SharePoint will created a service application database typically named as "WSS_Logging" after you provision Usage Collection Service.
    If this service is already present , then I would suggest to reconfigure usage and logging service once again. It should work.
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/30d11d27-6708-4bfe-a7d3-4b0aed522e7d/site-web-analytics-reports-no-more-data?forum=sharepointadminprevious
    Try this hotfix, it fixed mine.
    http://support.microsoft.com/kb/2459125
    If this helped you resolve your issue, please mark it Answered

Maybe you are looking for