Rare Problem in Delivery against a Sales Order

Hi Experts,
I am trying to make delivery against a Sale Order, but it is showing Only ZERO quantity available in this product.
I have checked the quantity and no doubt that there is sufficient quantity avialable in the same plant, same storage location.
No stock reservations have been maintained for that item.
I also have checked that there are no Safety Stock maintained for that product in that plant.
Waiting for your precious reply.
Thanks & Regards
Kuldeep Dahiya

Hi Kuldeep,
check the schedule lines and see is it a confirmed dates or not, if the schedule lines are not due system may give you the same message.
once again check for the reservations of the stock in MD04 and confirm it.
hope this will help u, if yes reward points.
venkat cheedalla

Similar Messages

Two Delivery dates in Sale Order against one item

Dear All
I need two delivery dates in sale order. one is default at the time of creation sale order. second i need actual delivery date which will be confirmed by production planning department after analysis the order whether material can be ready on that delivery date or it need to change. Actual delivery date may vary from original delivery date and both need to preserve in system. kindly provide solution. best regards.
Manjit

You need to select the Availability & Transfer of Req. check box in Schedule Line Configuration.It will transfer the req. to PP.So while creating the sale order , schedule Lines will be confirmed as per the Available Stock.
System will give you the Default Delivery Date as the Date added after Lead Time in days in the Configuration.Else system will give the Current Date.
Best regards,
Ankur

Delivery block in sale order

Hi,
I got a problem with registration of a sale order with a BAPI : it set automatically a delivery block , and this not happen when using VA01.
After create the order, for this one will be insert a technical object (serial number) and made some other change (always using BAPIs) like the requested delivery date or some texts.
There is not any block set in customizing (tab. TVAK) for that type of order.
If this was true,the block should have been set even using VA01,or not ?
Thank you in advance.
Luca

I mean your order gets DB if created via BAPI and does not get any DB if created via VA01, right ? What DB did your order get when was created via BAPI ?
Is it your custom DB or SAP DB ? Do you have any special logic in userexits to apply DB in some cases ? If you have any logic which applies DB - does it have a check for sy-tcode ?

Auto-create delivery for multiple sales orders

I would like to ask how to create auto-create 'single' delivery
for multiple sales order during release sales order in R11i.
It is found in my example during release sales order, multiple
sales orders fulfill release sales order criteria, a single pick
slip is generated but it is found that each sales order have
individual delivery with it. It will casue multiple pack slips
for a singles pick slip. Is it normal feature for auto-create
delivery, or any setup to solve it?
Thanks in advance.

Am not able to do Single Delivery for Muktiple sales orders
Have you searched the forum for this question as to why you were not able to generate ?? It could be due to multiple reasons. Please search the forum and update here what steps you have taken after taking the inputs from here, if the problem is still not resolved.
thanks
G. Lakshmipathi

MRP-Delivery Schedule for Sales order is not updating in Production order

Dear Experts,
I have created Sales order and maintained delivery scheduling, Then Run MRP through MD50,
We received Planned order then through this we have converted to Prodcution order.
When we observe the delivery schedule for sales order under assignment Tab in Produciton order which is showing zero instead showing line item of Delivery schedule.
I am able to see Sales order and Line item but i am not abel to get any delivery schedule line item.
Please suggest where settings are missing.
Thanks in advance
Regards
Don

Dear Experts,
Please provide me solution.
after Running MD50 transaction against Sales order.
If I maintained different Scheduling Line Item for First Line item of Sales order.
The Respective Scheduling Lines should update against Each Production order which has converted from Planned order.
Thanks in advance.
Regards
DON

How to create one delivery for two sales orders?

Hi Experts,
I need to create one delivery for two sales orders. But it fails.
The route, shipping point, ship to party are same for both orders but INCOTERMS are different.
Delivery date, Good issue date, loading date,material availability date, transportation planning date for 1st order is 12/07/11 and for second order is 14/07/11.
I have created delivery on 14/07/2011 but the delivery is created for 1st order only, the second order is missing in the delivery.
It not happened because of incorterms.? different dates
Kindly help regarding this.
Thanks
Raghu

Hi
To understand splitting behavior, see SAP Note 546668 - FAQ: Delivery split when creating deliveries. And yes, incoterms happens.
I think that with the help of question 6 you can try to force the merging of SO. Then, see SAP Note 166397 - Delivery split according to customer field ZUKRL, and handling the field ZUKRL in a VOFM in the copy rule I think that you can try to do it.
Finally See Note 4505 - Duprec when adding delivery (VL04, VL01, VL10*) to avoid problems while you are merging.
Regards
Eduardo

One delivery for Multiple sales orders

Dear friends,
Am not able to do Single Delivery for Muktiple sales orders. Can you guide me what r the configuration settings i have to do on this?
Regards,
Madhav

Am not able to do Single Delivery for Muktiple sales orders
Have you searched the forum for this question as to why you were not able to generate ?? It could be due to multiple reasons. Please search the forum and update here what steps you have taken after taking the inputs from here, if the problem is still not resolved.
thanks
G. Lakshmipathi

Changing proposed delivery date in sales order for one specific sales org

Hi All,
I want to change proposed delivery date in sales order automatically for one specific sales org only without changing lead time in VOV8.
For that can I use MV45AFZZ. But it is asking access key to make changes. Is there any other user exit for the same. And how does exactly change it.
Thanks in advanced.
Points will be awarded.
Regards,

EXIT_SAPFV45E_001 has nothing to do with this - it is meant to update the purchase order from a sales order. It might not even be triggered if the sales order has no link to a purchase order.
USEREXIT_SAVE_DOCUMENT is not really good for this either, because the delivery date has to be changed before that. If memory serves, it also influences the schedule lines and probably the ATP check and such. I would strongly advise against it. One of the other routines in MV45AFZZ should do just fine, USEREXIT_MOVE_FIELD_TO_VBAK for example.

Uploading Purchase Order Against the Sales Order through DTW

Hi Experts,
I searched the forum but could not see anything regarding this.
Can I upload Purchase Orders against the Sales Orders using DTW upload facility? Manually we do it through the Logistics Tab in Sales Order.
Thank you in advance.
Kind Regards,
IC

Hi,
You can use the BaseType, BaseEntry and BaseLine columns for this in the row level template (DLN1):
BaseType: it's the Object Type of base document (ORDR.ObjType) which is '17' in case of Sales Order
BaseEntry: it's the Document Entry of the base document (ORDR.DocEntry)
BaseLine: it's the row number of the line in the base document (RDR1.LineNum)
If you import your Delivery Notes with this info, the link to the Sales Order will be updated just as if you used Copy To in SAP.
Regards,
Nat

Steps to dispatch a Material against a Sale Order

Dear Sir,
We have created a Sale-Order . The Material to be dispatched is available in the Stock .
Pl guide us as what steps are rqeuired to be followed to finally dispatch & Invoice this Material against the Sale Order .
Also pl guide , the steps involved incase the Material is Exciseable and Excise Duty is also to be paid .
We assure to give full points for the suggested solution pl .
Regards
B Mittal

Dear Mittal
Please follow the steps
- Go to VA02, input the sale order and execute. There go to schedule line tab and see whether the stock is flowing under the tab Confirmed quantity. If not do availability check and save.
- Go to VL01N, give shipping point, sale order reference and execute. There click on Picking tab and input the quantity to be delivered in Picked Qty column. Press Post Goods Issue on top. Make a note of the delivery reference.
- Go to VF01 by default, the delivery reference will flow in your screen. Press F8 and check whether the conditions are flowing correctly and if so, save the billing document and make a note of the billing reference.
- Go to J1IIN, click on From Billing here again by default the billing reference will flow; if not give the above billing reference and execute. Save the document.
The above steps are applicable whether the material is excisable or not. The control is in J1ID. If the material is excisable, you have to select Material and Chapter ID combination in J1ID and for that material, maintain 1 under the tab Declared. If excise duty is not applicable, dont maintain any value there.
thanks
G. Lakshmipathi

Required delivery date in sales order shoud not be less than the inhouse pd

Customer Requested Dates (CRD) entered in orders are often shorter than Product form wise lead time.
Logic to be configured in SAP : SAP should capture the CRD as per the lead time of Products or Date entered by sales persons (whichever is later).
Required delivery date in sales order shoud not be less than the inhouse production lead time.
Please help.
Regards

IMG - Sales and Distribution - Basic Functions - Availability Check and Transfer of Requirements - Availability Check - Availability Check with ATP Logic or Against Planning - Carry Out Control For Availability Check
Here select the combination of your Availability Check & Checking Rule.
Under Replenishment Lead TIme, you need to put a Tick Mark in the Check Box of "Check without RLT"
This will make sure that system considers either the Requested Delivery Date or actual Material Availability Date, which ever is earlier.
Hope this helps.
Thanks,
Jignesh Mehta
Edited by: Jignesh Mehta on Nov 9, 2011 12:18 PM
Edited by: Jignesh Mehta on Nov 9, 2011 12:23 PM

Automatic delivery dates in sales order.

Hi all,
The problem is that, The sales order is taking current date as delivery date , although ther are all config exist for availabiltity chek and Delivery & Transportation scheduling. The goods reciept processing time is 5 days in master record(MRP 2 View).
so if order is created on 18.04.08 , the delivery dated also been shown as 18.04.08. why?
Thanks in advance.
Edited by: Gaurav S on Apr 18, 2008 11:20 AM

Hi,
System takes the requested delivery date from the sales doc type settings-
goto VOV8- choose your sales doc type-details,
in req.del date/pricing date/po date- maintain the lead time in days field- as desired.
the above settings you made in material master is to confirm the delivery date in sales order, but not for the requested del date.
hope it clears.
*rewards

Not getting single delivery for two sales orders

Hi Sapians,
I am getting one delivery for two sales orders in VL10A. But in another case, out of two sales orders, for one order I went to partner functions and changed the address line of ship to party while creating sales order.(Since for that particular order the ship to address is different). then as usual I proceeded to VL10A. But this time system gives two seperate delivery document numbers instead of one which is given earlier. Can any of the experts help me in this regard.
Thanks for your response in advance.
Raksha Agarval

Hi Raja,
Just now I came out with exact problem. While creating sales order, in the header data partner function tab, if we select the ship to party line item and go for details tab and change the address first line item (that is street number), the same change is also if we do in second sales order also, then if we go for delivery in VL10A, then system gives two delivery documents instead of one.( though, all the requirements are met, like same plant, shipping point, shipping conditions, incoterms.. etc).
Even after meeting the requirements, as per SAP standards also why system giving two delivery documents? is the problem.
Please come with possible reasons
Thanks in advance,,
Raksha.

Need help on IDoc for Picking, Packing and PGI against the Sale order

Hi All,
I am new to this IDoc stuffs. Below is the scenario for which I would like to know the details of the IDoc...
Business Case:
1. Storage location is a HU Managed but not WM managed.
2. This storage locations is managed by a third party
3. Outbound delivery document against the SO will be created by our personnels in SAP for this storage location.
4. Picking, Packing and PGI needs to happen/post via Idoc. (By packing here, i refer to assign the HUs that are already created for the materials and is available in the storage location and not repacking)
Is there any standard IDoc that can be used here to Pick, Pack and post PGI. We would like to have picking and packing in a first idoc and PGI on the second idoc.
Thanks,
Prashant

Hi Typewriter,
Thanks for your reply on this post..
The business process is as below (it was changed recently to have the creation of OBD, pick HUS and then post GI via single IDOC)
1. We have a storage loc in our enterprise structure that is HU managed but not WM managed.
2. This storage loc is being maintained by a third party.
3. SO will be created to be shipped out of this plant/sloc.
3. The stocks at this storage loc will be Special stock "E" against the sales order. And the stocks will be Packed in HUs.
4. The third party is informed to deliver the stocks (HUs - that do have the special stock number which internally refers to the the SO number and the line item number) directly to ship to party address in SO.
5. The 3rd party will physically ship the HUs to customer and send in the details that they have shipped goods against the sales order.
6. The details sent by the 3rd party will be received in SAP to create OBD for the sales order, Pick, Pack and post GI. This can happen via a single IDOC..
I am now planning to create a custom IDOC type referring to the standard IDOC type DELVRY03 and message type DESADV and to use a custom BAPI/FM.
Do you think I am using the right ones?
Thanks,
Prashant Kumar

Cant change delivery date on Sales Order posted in prior period

Hello All,
Scenario: A sales order which was processed in prior period but since then delivery date had changed due to request from our customer. When we try to go back and change the delivery date, we find it greyed out. To get around this, we have to open the period again, change date and then close the period. Problem is that not all dates get changed, so our late delivery report look bad, shows that 90% of our deliveries are late, when in fact they are on time, the new time which we could not record on the Sales Order. We have similar problem with our purchase Orders.
Is there anything in Administration we can do to enable us to easily chnage delivery dates on Sales order and purchase orders?

Hi,
Welcome you to post on the forum. What is your B1 version and PL?
Thanks,
Gordon

Rare Problem in Delivery against a Sales Order

Similar Messages

Maybe you are looking for