Rasterize Error Brother Printer?

Hello,
I have not been able to get any PDF files to print from a brother 2280DW running mac OS1O.6.8 on a powermac 2.4 Intel Duo?
Updated to the current driver checking both apple and brother. Reinstalled to an older version of adobe reader specifically for 10.6 and just doeant work??
any ideas? I have read a long fix for Linux which I don't believe will work for this situation. http://ubuntuforums.org/showthread.php?t=1993275
Do I need to update the operating system? Because the computer is older and I haven't read that Lion is the best way to roll I'm reluctant to move up.
Any suggestions are greatly appreciated.
Thank you

Hi, not much to go out here.
Might try these two...
Mac OS X: About the Reset Printing System feature ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
Might try Printer Setup Repair 5.1...
http://www.fixamac.net/software/index.html

Similar Messages

I am trying to add my brother printer series HL-2270DW, but I keep getting an error message that the software is currently when it tries to install it.

I am trying to add my brother printer series HL-2270DW, but I keep getting an error message that the software is currently unavailable. How do I fix this?

I am also having this same problem. I have updated my computer. I have downloaded the complete brother driver package from Apple as well as the drivers from Brother. As far as I can tell, all have been installed successfully. It is only when I try to ADD the printer do I get that message. Both my roomate and I have Macbook Airs so we cant use the disk which came with the printer. This is irrelivant anyway as the drivers have been successfully downloaded and installed. SO FRUSTRATING!!!!!

Printing generates an error message E1 on Brother printer

When I print a Firefox webpage on my Brother printer HL-3070 CW it does not work. The printer kicks in but after just one second of fan trust it posts an error message "Unable to print E1" (Kan ej skriva E1 in swedish). I then need to shut off the printer and restart again in order to reset the printer.
With other documents the printer works fine (OS test page, word processor files, pdf files).
I checked with the Brother support without any luck.

Hi hornbacher,
Please check out the troubleshooting steps listed in this kb article: [[Fix printing problems in Firefox]] sometimes Firefox's cached printing settings need to be reset.

Unable to print from HP Pavilion 17-f048ca to Brother printer

Hello, I've recently bought a brand new HP Pavilion 17-f048ca (windows 8.1). However, I've been unnable to connect my Brother printer to the laptop as it always resulted in a driver error. I am doing this via usb cable. I've tried all of the usb ports but the driver error still exists. I tried printing from another laptop with the same usb connection; this time working. I assume there is something wrong with the usb ports of my laptop, even though it has recieved no damage from the 2 days in my possession. Any ideas on how to fix it?

TCNInsanity
Welcome to the HP Forum.
Is is likely you need to update the printer software.
You might go to the Brother printer's support site and look for printer software for Windows 8.1.
In the case of HP printers, it is necessary to disconnect the USB cable from the printer, install the software, and then connect the USB cable to the printer only when directed.
Be sure to read the instructions for the printer software installation for the Brother printer as they may differ from this standard.
Click the Kudos Thumbs-Up to show you appreciate the help and time from our Experts.
Although I strive to reflect HP's best practices, I do not work for HP.
Click Accept as Solution when the Answer is a good Fix or Workaround!
Kind Regards,
Dragon-Fur

Uninstalled epson printer from control panel...installed new brother printer....now i cannot print anything .pdf old or newly downloaded

uninstalled epson printer from control panel...installed new brother printer....now i cannot print anything .pdf old or newly downloaded@

For starters, what exactly do you mean by "cannot print"?
Are you getting an error message? Are you trying to print from within Reader or are you opening these in the browser? What version of Reader. Even though it's a new printer, the drivers that came with it (or the ones that were already on your computer) may be old so, have you downloaded the most recent drivers from the Brother site?

Brother printer and OS X Yosemite.

Help. I've bought a brother printer and it isn't compatible with OS X Yosemite. The disk that came with the machine isn't compatible and the downloads from Brother don't work either. Anyone else had this problem?

With another O.S. in another computer is OK.
Thank you
Juan Carlos Rubio Perez
[email protected]
Este mensaje y los ficheros adjuntos pueden contener información confidencial. Los mismos contienen información reservada que no puede ser difundida. Si usted ha recibido este correo por error, tenga la amabilidad de eliminarlo de su sistema y avisar al remitente mediante reenvío a su dirección electrónica; no deberá copiar el mensaje ni divulgar su contenido a ninguna persona.

Brother printer won't print thru labview

I have looked at the two big threads about printing via USB printers, but they don't address my issue. I recently upgraded to Windows 7, and now my report generation code will not work. Anytime i attempt to print thru LV, the LED on my Brother printer begins flashing red and the print doesn't happen. The troubleshooting section of the manual for this label printer mentions a loss of communication, and connecting to the wrong USB ports. Since the Brother software for printing labels works fine on its own, I figure the loss of communication isn't the issue. I have tried the basic Report Express VI, rather than using the Set Margin VI and others, and that won't print either. I even uninstalled and reinstalled the software, and do not achieve different results.

Hi jdezman,
I've got a few questions about the set up. Are you getting any errors in LabVIEW when this happens? It might also be helpful in this situation to post the code that's being used here so that we can check if anything needs to be changed programatically.
I'd also like to check which USB port you're using. Have you tried using a different port? I've heard about Windows 7 sometimes handling USB ports awkwardly. The fact that the Brother software works makes me doubtful that this would change things, but I'd think it would be a pretty quick change to make to see if it makes any changes.
I also want to verify that this issue has been present since upgrading to Windows 7. Stated another way, has this code ever worked since the switch to Windows 7? I'm curious if the dll that LabVIEW is calling to handle it's print has changed in Windows 7 and is causing a problem.
Thanks,
-Dave C
Applications Engineer
National Instruments

Brother Printer CUPS Driver conflict crashed host application

I just bought a Brother MFC-J4710DW multifunction printer but whenever I select Printer Options from the pop-up menu of the print dialogue box, the application I am printing from crashes leaving an error message saying the following (TextEdit is only an example).
TextEdit quit unexpectedly while using the BRInkQuality12 plug-in.
Click Reopen to open the application again. Click Report to see more detailed information and send a report to Apple.
Basically, this means that I have no control over the print quality, which paper is used or which paper tray is selected.
BRInkQuality12 is the Brother CUPS driver and I found virtually nothing about it online, let alone any problems with it. I have spent some time with Brother technical support who basically said that they have not seen this problem before and as a result, I started doing my own troubleshooting.
It seems to be a problem with my user account as I have tried other accounts and it works fine. Permanently using a new user account isn't really an option I want to think about so I set about trying to track down whatever it is that ic causing the crash.
So far, I have repaired permissions, booted in safe mode without success. I then went through everything in my user account library and have eliminated everything systematically - rebooting dozens of times with groups of items removed and then replaced when the problem remained.
In the olden days, I would have been using Conflict Catcher to identify the problem but there doesn't seem to be anything like CC for OS X.
I would be very grateful if anybody has any suggestions on how to determine what is causing this or if anybody else has experienced it.

Thanks.
I looked at that earlier and searched online for EXC_BAD_ACCESS (SIGSEGV) but I only found information which spoke of what I had already been doing.
Anyway, here is the first 'paragraph' from Console:
Process:         TextEdit [1327]
Path:            /Applications/TextEdit.app/Contents/MacOS/TextEdit
Identifier:      com.apple.TextEdit
Version:         1.9 (310)
Build Info:      TextEdit-310000000000000~1
Code Type:       X86-64 (Native)
Parent Process: launchd [191]
Responsible:     TextEdit [1327]
User ID:         503
PlugIn Path:       /Library/Printers/Brother/PDEs/BRInkQuality12.bundle/Contents/MacOS/BRInkQualit y12
PlugIn Identifier: com.brother.print.pde.CocoaBRInkQuality12
PlugIn Version:    4.0.2 (11)
Date/Time:       2014-06-19 17:18:05.381 +0100
OS Version:      Mac OS X 10.9.3 (13D65)
Report Version: 11
Anonymous UUID: 15188082-B259-420C-5294-44AAC8D81F85
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: EXC_I386_GPFLT
Application Specific Information:
objc_msgSend() selector name: isEqualToString:
Performing @selector(selectPDE:) from sender NSMenuItem 0x6080002abc40
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0   libobjc.A.dylib               0x0000000105203097 objc_msgSend + 23
1   com.brother.print.pde.CocoaBRInkQuality12 0x00000001164aa3d6 -[BRInkPrintSetting12PDE determineUI:] + 597
2   com.brother.print.pde.CocoaBRInkQuality12 0x00000001164a688d -[BRPrintQualityPDE initializePopup] + 364
3   com.brother.print.pde.CocoaBRInkQuality12 0x00000001164acc22 -[BRInkPrintSetting12PDE initializePopup] + 74
4   com.brother.print.pde.CocoaBRInkQuality12 0x00000001164ab1dc -[BRInkPrintSetting12PDE willShow] + 43
5   com.apple.print.framework.Print.Private 0x00000001164288cb 0x116426000 + 10443
6   com.apple.print.framework.Print.Private 0x000000011642f2b7 0x116426000 + 37559
7   com.apple.print.framework.Print.Private 0x000000011642ef9c 0x116426000 + 36764
8   com.apple.AppKit               0x000000010597f260 -[NSApplication sendAction:to:from:] + 327
9   com.apple.AppKit               0x000000010599a1c8 -[NSMenuItem _corePerformAction] + 394
10 com.apple.AppKit               0x0000000105999f04 -[NSCarbonMenuImpl performActionWithHighlightingForItemAtIndex:] + 117
11 com.apple.AppKit               0x00000001059e940d -[NSMenu _internalPerformActionForItemAtIndex:] + 35
12 com.apple.AppKit               0x00000001059e9289 -[NSCarbonMenuImpl _carbonCommandProcessEvent:handlerCallRef:] + 104
13 com.apple.AppKit               0x000000010598fff6 NSSLMMenuEventHandler + 716
14 com.apple.HIToolbox           0x0000000107cdf1d4 DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*) + 892
15 com.apple.HIToolbox           0x0000000107cde787 SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*) + 385
16 com.apple.HIToolbox           0x0000000107cf2880 SendEventToEventTarget + 40
17 com.apple.HIToolbox           0x0000000107d28640 SendHICommandEvent(unsigned int, HICommand const*, unsigned int, unsigned int, unsigned char, void const*, OpaqueEventTargetRef*, OpaqueEventTargetRef*, OpaqueEventRef**) + 420
18 com.apple.HIToolbox           0x0000000107d5b228 SendMenuCommandWithContextAndModifiers + 59
19 com.apple.HIToolbox           0x0000000107d5b1d0 SendMenuItemSelectedEvent + 178
20 com.apple.HIToolbox           0x0000000107d5b0af FinishMenuSelection(SelectionData*, MenuResult*, MenuResult*) + 94
21 com.apple.HIToolbox           0x0000000107d3919e PopUpMenuSelectCore(MenuData*, Point, double, Point, unsigned short, unsigned int, Rect const*, unsigned short, unsigned int, Rect const*, Rect const*, __CFString const*, OpaqueMenuRef**, unsigned short*) + 1726
22 com.apple.HIToolbox           0x0000000107d382f6 _HandlePopUpMenuSelection7 + 596
23 com.apple.AppKit               0x00000001059e8161 _NSSLMPopUpCarbonMenu3 + 4153
24 com.apple.AppKit               0x00000001059e7116 _NSPopUpCarbonMenu3 + 39
25 com.apple.AppKit               0x00000001059e6dd6 -[NSCarbonMenuImpl popUpMenu:atLocation:width:forView:withSelectedItem:withFont:withFlags:withOpti ons:] + 350
26 com.apple.AppKit               0x00000001059e5a87 -[NSPopUpButtonCell trackMouse:inRect:ofView:untilMouseUp:] + 531
27 com.apple.AppKit               0x00000001059e413d -[NSControl mouseDown:] + 706
28 com.apple.AppKit               0x0000000105965a58 -[NSWindow sendEvent:] + 11296
29 com.apple.AppKit               0x00000001059045d4 -[NSApplication sendEvent:] + 2021
30 com.apple.AppKit               0x0000000105754a19 -[NSApplication run] + 646
31 com.apple.AppKit               0x000000010573f7a3 NSApplicationMain + 940
32 libdyld.dylib                 0x000000010a0625fd start + 1

Since OSX 10.10.3 Brother printer is no longer found

Hi,
after updating OSX and then deleting all printers in system settings (had a problem with an Epson scanner/printer combo... different story but similar...) I'm trying to add my Brother printer again. But it is not found, it won't appear in the list. This seems to be a problem with OSX, because using the Brother Admin Tool (BRAdminLight) I can print a test page - so technically a connection exists (over network). I also updated the printer firmware with the tool from Brother, but it didn't change anything.
What can I do?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Select
/var/log ▹ cups ▹ error_log
from the hierarchical list on the left side of the Console window. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
Each message in the log begins with the date and time when it was entered. Select the messages, if any, from the time of the last failed attempt to add the printer. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
When you post the log extract, you might see an error message on the web page: "You have included content in your post that is not permitted," or "The message contains invalid characters." That's a bug in the forum software. Please post the text on Pastebin, then post a link here to the page you created.

How can I download a driver for a Brother printer HL2270DW for Mac OSX 10.9.1?

I recently purchased a Brother printer HL2270DW and am running Mac OSX 10.9.1. The brother website has a download available, but in the process of adding the printer I get the error message that "Can't install the software because it is not currently available from the Software Update server." Any ideas?

Just found a solution which involves resetting the printer settings:
To Reset the Printer Setting:
1) Open "System Preferences"
2) Select the "Print & Scan" pane
3) Right click (or control click) anywhere in the "Printers" window (in the white space below any of your existing printers)
4) Select "Reset Printing System..."
That will reset the printing settings, and should happen immediately. You'll know if it worked because any existing printers you had previously set up will disappear from your printers list. Once the system has been reset, click on the "Add printer" button and add the printer that you're trying to add.
As any other printers you had previously added are deleted you'll have to add them again.
Hope that helps

Error while printing.

Error while printing.

PowerPC Mac 10.4.11, Print with Safari with: Error while printing.
Others AP: Printer Setting Utility can't pop up, no effective.

HP LASERJET CP1525nw print error when printing online Gmail emails with Google Chrome

HP LASERJET CP1525nw print error when printing online Gmail emails with Google Chrome. Extra large font sizes and weird formatting issues only when printing emails from Gmail within Chrome. No problems when printing the same email from Gmail+Internet Exolorer or Thunderbird. Using the IE Tab extension in Chrome prints the email correctly but the style of Gmail's message window is completely weird ie: formatting bar is spread out vertically instead of horizontally. I believe it is clear that this is an application specific issue between the HP LASERJET CP1525nw printer and Google Chrome + Gmail. This printing scenario does not occur when printing anything else or when printing via another printer. I would appreciate receiving any suggestions to solve this issue.
OS: Windows 7 Ultimate x64
Browser: Google Chrome 15
HP Print driver: HP Universal Print Driver for Windows PCL6 v5.4.0
Printer is connected by WiFi to 4 computers

Hi AbZu,
You need to contact Google Chromes technical support as this is only an issue with Chrome. You have indicated that the printer functions correctly everywhere else. Check out the link below for Google Chrome technical support. Let me know if you need additional assistance?
http://support.google.com/chrome/?hl=en
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Error when printing reports from forms in Linux

Im having an error when printing a report from a form. The problem is, only with certain forms. when printing a report (to PDF) from other forms, it prints with no problems. The oracle is 10g AS and operating system is Redhat AS 3.
The error, in the log from the reports server is:
[2004/9/7 7:14:59:599] Exception 62204 (): Internal error writing the image BandCombine: a row of the matrix does not have the correct number o
f entries, should be OpImage.getExpandedNumBands(source0.getSampleModel(), source0.getColorModel()) + 1..
exception oracle.reports.RWException {
oracle.reports.RWError[] errorChain={struct oracle.reports.RWError {
int errorCode=62204,
java.lang.String errorString="Internal error writing the image BandCombine: a row of the matrix does not have the correct number of entries, sh
ould be OpImage.getExpandedNumBands(source0.getSampleModel(), source0.getColorModel()) + 1..",
java.lang.String moduleName="REP"
at oracle.reports.utility.Utility.newRWException(Utility.java:604)
at oracle.reports.toolkit.image.writer.JPEGImageWriter.writeImage(JPEGImageWriter.java:130)
at oracle.reports.toolkit.image.ImageManager.writeJPEGImage(ImageManager.java:524)
at oracle.reports.engine.EngineImpl.CRunReport(Native Method)
at oracle.reports.engine.EngineImpl.run(EngineImpl.java:353)
at oracle.reports.engine.EngineClassPOATie.run(EngineClassPOATie.java:84)
at oracle.reports.engine.EngineClassPOA._invoke(EngineClassPOA.java:117)
at oracle.reports.engine.EngineClassPOA._invoke(EngineClassPOA.java:62)
at com.inprise.vbroker.poa.POAImpl.invoke(POAImpl.java:2355)
at com.inprise.vbroker.poa.ActivationRecord.invoke(ActivationRecord.java:104)
at com.inprise.vbroker.GIOP.GiopProtocolAdapter.doRequest(GiopProtocolAdapter.java:492)
at com.inprise.vbroker.IIOP.ServerProtocolAdapter.doRequest(ServerProtocolAdapter.java:64)
at com.inprise.vbroker.GIOP.GiopProtocolAdapter.dispatchMessage(GiopProtocolAdapter.java:653)
at com.inprise.vbroker.orb.TPDispatcherImpl$TPDispatcher.run(TPDispatcherImpl.java:99)
at com.inprise.vbroker.orb.ThreadPool$PoolWorker.run(ThreadPool.java:76)
[2004/9/7 7:14:59:599] Error 50103 (C Engine): 19:14:59 ERR REP-0069: Internal error
REP-62204: Internal error writing the image BandCombine: a row of the matrix does not have the correct number of entries, should be OpImage.get
ExpandedNumBands(source0.getSampleModel(), source0.getColorModel()) + 1..
[2004/9/7 7:14:59:600] Error 50103 (C Engine): Error Writing Image, ID 2
[2004/9/7 7:14:59:601] Error 50103 (rwtic:rwticga): Look up for image attributes for image 2
[2004/9/7 7:14:59:602] Error 50103 (rwtic:rwticgi): Looking up for Image, ID 2 in the cache
[2004/9/7 7:14:59:603] Error 50103 (rwtic:rwticgi): Loading the Image into the cache
[2004/9/7 7:14:59:603] Debug 50103 (ImageManager:getImageSource): Retrieving the Image object for ID : 2
[2004/9/7 7:14:59:603] Error 50103 (rwtic:rwticgi): Image successfully loaded into the cache
[2004/9/7 7:14:59:604] Debug 50103 (ImageSource:getImageHeight ): Start Height : 155
[2004/9/7 7:14:59:604] Debug 50103 (ImageSource:getImageWidth ): Start : width : 138
[2004/9/7 7:14:59:604] Debug 50103 (ImageSource:getImageColorSpace ): Start
[2004/9/7 7:14:59:608] Exception 50125 (): Caught exception: java.lang.NullPointerException
exception oracle.reports.RWException {
oracle.reports.RWError[] errorChain={struct oracle.reports.RWError {
int errorCode=50125,
If anyone could help me, is important !
Thx in advance
Bruno Santos

Raise a TAR I reckon

Error during print request output. l_rc = 1

Hi ,
I have a request to create on ouput device which can copy the spool request to desired location in application server. Our server is not connected to any physical server and is windows NT.
I am tring to create ACCESS TYPE 'L' with host printer name '__default'.
I am using control set to copy file at desired location on server
COPY &F <path for file to be copied>&T
File is being copied to desired location but its returing error message "Error during print request output. l_rc = 1"
Complete log is below:
      SAP spool error log
      =====================
Print request processing log
The host spool is reporting errors
Message from host spool:
1 file(s) copied.
End of message
Command used: COPY E:\usr\sap\D06\DVEBMGS00\data\000002934300001.D06 E:\interface\D06\
Errors occurred processing this print request
Error during print request output. l_rc = 1
There may be no printout
Most important attributes of spool request
Request number 29343
Request name SCRIPT ZRAJ BASISADMIN
Client 220
Owner BASISADMIN
Request attributes
Time created   2008102906203900
Remaining life +00008000000
Dispo 1 (Go/Hold) G
Dispo 2 (Keep/Delete)     K
Dispo 3 (Indirect/Direct) D
Default output device ZRAJ
Default no. copies 1
Format X_PAPER
Main print request characteristics
Spool request number 29343
Print request number 1
Print request attributes
Time created   2008102906203900
Output device ZRAJ
Format X_PAPER
Character converter active when first problem occurred
No information available
Pls help.
Regards
Raj Kiran

If you have done a search with your subject line, you would have got the following [results.|https://www.sdn.sap.com/irj/sdn/advancedsearch?query=%22errorduringprintrequestoutput.l_rc%3D1%22&cat=sdn_all]
so do a search in SCN before posting your question.
Regards
Karthik D

"Print Error Whilst Printing" when trying to print or save as PDF

I don't understand why i can't just print - everytime it says Print error whilst printing whether i'm actually trying to save it or print it. I'm very new to using Macs - 3 days now so not used to how they work yet but i'm running Tiger 10.4.8 on an Intel Mac if anyone can help me please!

Hello Dorin and thank you for your answer.
Yes page 5 is a double page spread and this is not the only one in my book! I will modify the page 5 to see if the error message will appear at the next double page spread....
Thanks again
Richard

Rasterize Error Brother Printer?

Similar Messages

Maybe you are looking for