Rate routing table

Hi PP Gurus,
I am making one z report which will show component allocation list. Means which component allocated to which operation no. in rate routing.
Can any body tell me in rate routing, in component allocation operation no. comes under which table
Jayesh Narvankar

PLMZ is the table where you will get the link to rate routing group no to BOM item number. to get the details of BOM you must use MAST and STPO tables.
I wander why do you need Z report? you can get this data in routing display
Use CA51 with option Display Component Assignment tick. You will get all the details what you are asking for.
Raj.

Similar Messages

Difference between sh ip bgp & sh ip route? BGP tables and main routing table.

Difference between sh ip bgp & sh ip route?
sh ip bgp :::: loc-rib ?
sh ip bgp nei x.x.x.x advertised-routes : adj-rib-in.
sh ip bgp nei x.x.x.x recieved-routes : adj-rib-out.
sh ip bgp nei x.x.x.x routes : loc-rib ?
sh ip route = rib ? if yes does it mean its loc-rib ?
so in a given router with bgp running, will there be 5 tables (sh ip bgp; adj-rib-in; loc-rib;adj-rib-out; sh ip route) ? if yes where are they saved ?

sh ip bgp
shows the BGP table (where are stored info coming from BGP update)
sh ip bgp nei x.x.x.x advertised-routes
shows networks that your router will advertise to a specific neighbor
sh ip bgp nei x.x.x.x recieved-routes
shows advertisement received from a specific neighbor; networks (NLRI) filtered with route-map distribute-list,... are included (Inbound soft reconfiguration must be enabled)
sh ip bgp nei x.x.x.x routes
shows only routes sent by a specific neighbor and not filtered or discarded (i.s accepted)
sh ip route
show routing table; it contains the best route for each network (best is first of all the lowest administrative distance, then the lowest metric)
Bye,
enrico.
PS please rate if useful

Problem during Rate Routing Upload using BDC.

Dear Sir/Madam,
I am uploading Rate Routings using a BDC program which is working perfectly but having a single problem.
In the initial screen of the transaction CA21(Create Rate Routing), I need to enter only the Material Number and its Plant and all the other fields should be left blank.
But, here the group number field is automatically getting filled with the previous value and it is incrementing the group counter number.
I want the system to allocate different group number for each Routing. I want the group number to be unique.
Thanks,
Ranjan.

Dear Ranjan,
While doing recording CA21. you would pass only the material number and plant (i mean you did recording of CA21 based on material number as well as plant not for routing number (group counter))
Routing number (group counter) dynamic (In your case Internal number rage has assigned).
So the Problem is:
1st record of you internal table update smoothly because you program will pass only material and plant
group counter (RC271-PLNNR) field is blank, after update 1st record system will regenerates the
group counter number.
ones the system updates the data it will generates Group counter number and assign to filed :(RC271-PLNNR).
after saving the record system will go loop statement of you program. again program will call the call transaction statement with 2nd record of the internal table. call transaction statement pass the material number and plant field at ca21. but group counter number automatically poulated in the screen field because that time system can't be refresh the initial screen of CA21,
so system will shows previous updated screen ( 1st routing record will show)
Remove your bdc perform and add this code in your BDC perform.
* Start new screen *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
 CLEAR BDCDATA.
 BDCDATA-PROGRAM = PROGRAM.
 BDCDATA-DYNPRO = DYNPRO.
 BDCDATA-DYNBEGIN = 'X'.
 APPEND BDCDATA.
ENDFORM.
* Insert field *
FORM BDC_FIELD USING FNAM FVAL.
 IF FVAL <> SPACE.
 CLEAR BDCDATA.
 BDCDATA-FNAM = FNAM.
 BDCDATA-FVAL = FVAL.
 APPEND BDCDATA.
 ENDIF.
* Clearing the Group Counter *
 IF FVAL = SPACE.
 CLEAR BDCDATA.
 BDCDATA-FNAM = FNAM.
 BDCDATA-FVAL = FVAL.
 APPEND BDCDATA.
 ENDIF.
above code: 1st time of call transaction FVAL = space means ( group counter field is blank)
2nd and rest of the time FVAL <> space. means (previous record group number exists for new call transaction ) so system will be by pass with new record.
Check with debugging mode. you will come to whats going in you code.
Even i have go same problem while uploading routing data. i have find out solution after doing my RND.
Regards,
Akshath

Interface Vlan is not installed in routing table

Dear All,
Today I faced a strange problem and I want to share it with you to find what is the problem ?
we have a VRF for one customer and we use interface vlan to define customer's branch.
The customer interface is VLAN 422 and it is defined under customer VRF probably .
PE#sh running-config vrf V3056:RIYADHBANK
Building configuration...
Current configuration : 1321 bytes
ip vrf V3056:RIYADHBANK
rd 65000:3887
maximum routes 1400 80
route-target export 65000:5405
route-target import 65000:5405
route-target import 65000:5406
interface Vlan422
description By *****
ip vrf forwarding V3056:RIYADHBANK
ip address 172.29.12.97 255.255.255.252
service-policy input 2M_IN
PE#sh vlan id 422
VLAN Name Status Ports
422 422 active Gi3/0/11 efp_id 422
VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
422 enet 100422 1500 - - - - - 0 0
Remote SPAN VLAN
Disabled
Primary Secondary Type Ports
PE#
we can see the interface vlan is up
PE-L3Agg-Khu-107-2#sh int vlan 422 description
Interface Status Protocol Description
Vl422 up up ****
PE#
and we can see the vlan 422 belongs to the correct VRF
PE#sh vrf V3056:RIYADHBANK
Name Default RD Protocols Interfaces
V3056:RIYADHBANK 65000:3887 ipv4 Vl627
Vl775
Vl422
PE#
when we tried to troubleshoot the customer routing we found :
PE-L3Agg-Khu-107-2#ping vrf V3056:RIYADHBANK 172.29.12.97
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 172.29.12.97, timeout is 2 seconds:
Success rate is 0 percent (0/5)
PE-#
we could not ping the ip address of interface vlan 422.
PE#sh ip route vrf V3056:RIYADHBANK 172.29.12.97
Routing Table: V3056:RIYADHBANK
% Subnet not in table
PE#
PE#show ip route vrf V3056:RIYADHBANK connected
Routing Table: V3056:RIYADHBANK
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
+ - replicated route, % - next hop override
Gateway of last resort is 192.168.111.16 to network 0.0.0.0
172.29.0.0/16 is variably subnetted, 338 subnets, 2 masks
C 172.29.12.44/30 is directly connected, Vlan627
L 172.29.12.45/32 is directly connected, Vlan627
PE-L3Agg-Khu-107-2#
PE-L3Agg-Khu-107-2#
My question is: Why the interface vlan 422 is not installed in VRF Table as it is UP ??
thanks in advance!
Rashed Wardi.

what platform is this? can you please paste the output of show version and show run?
Also when you tested this was int Gi3/0/11 up/up?
Best Regards,
Bheem

Vrf routes into global route table

Dear All
I am stuck with a design I am trying to come up with for our EDGE network and looking for ideas from the community.
It is similar to what is described here:
http://www.cisco.com/en/US/docs/solutions/Enterprise/Network_Virtualization/ServEdge.html#wp86450http://www.cisco.com/en/US/docs/solutions/Enterprise/Network_Virtualization/ServEdge.html#wp86904
In short we have a multi-context FWSM at 2 sites creating an EDGE network, each site operate independently. The sites are linked internally in a single routing domain using OSPF. Each of the outside networks are in seperate VRFs, single-tier model.
I need to find a way to:
1) link the 2 sites (currently is done with a GRE tunnel between the site vrfs, looking at replacing this with mp-bgp and l3vpn encapsulation)
2) redistribute routes from each of the vrf into the common global route table (running ospf)
1 is working nicely with mp-BGP peer between the sites and routes distributed between, however I am stuck on how to achieve 2.
The only way I can see is to change the global route table to a vrf, then use rt import/export. This is commonly described as shared services. When I did that I got stuck with how to do the BGP peering as the loopback I was using for the peering is inside the new vrf.
Basically I want dynamic routing from the global route table to learn routes from each of the sites vrf. Then if a particular site's vrf is unavailable, it can pick up the other site's route.
Am I missing something here? The document linked makes it sound incredibly easy yet I am struggling with how to implement it.
Any advice is much appreciated

Hello philip,
It is really hard to help you, if you do not provide topology where you would like to implement these changes, so just some thoughts to your points:
2) redistribute routes from each of the vrf into the common global route table (running ospf)
You can use PE - CE design. VRFs are terminated on PE with all routes you need in respective VRFs. On PE, MP-BGP routes are redistributed into respective VRF's OSPF process . PE is connected with CE via separate physical interface for each VRF or you can use one physical interface with dedicated sub-interface for each VRF. PE is peering with CE using OSPF. All routes end up in CE global routing table.
Problems with this design ->
- for each VRF you have to create separate OSPF process on PE and CE, also OSPF process ID has to be unique on PE for each VRF. Also OSPF process ID has to match to establish OSPF neighborship between PE-CE, so on CE you will have to redistribute OSPF routes from each process to your main OSPF process.
other workarounds ->
1) instead OSPF you will use as peering protocol BGP between PE-CE, but you still have to redistribute BGP routes to OSPF on CE
2) you will use different PE to redistribute each VRF -> BGP routes will be redistributed from VRF into OSPF (same process ID as your main OSPF ID). Routes will be advertised via OSPF into CE global routing table.
You will use on PE per VRF to redistribute routes into OSPF with same process ID as your main process ID. Thanks to different PEs, you can have same OSPF process ID, all these PEs will peer with same CE via OSPF.
I hope I made my thoughts understandable, cause its quite hard to explain
When I did that I got stuck with how to do the BGP peering as the loopback I was using for the peering is inside the new vrf.
This should not be a problem. You can have same IP on all VRF and also global table, so peering can still be done. After BGP routes are exchanged you can leak prefixes from one vrf to another or into global table as you need.
Best Regards
Please rate all helpful posts and close solved questions

Standard routing and rate routing

Hi All,
Can someone tell me what tables I should use to get the standard routing and rate routing for the query?
Thanks
Edward.

Dear,
Yes you are right.
The main difference between routing and rate routing is you can not create parallel sequence in rate routing CA21 only nothing else.
There are lot of different opinion on this topic but there is no too much difference in them only we use rate routing in REM and normal in Discrete manufacturing.
Also check this thread ,
Difference between routing and rate routing
Hope clear to you.
Regards,
R.Brahmankar

Transfer Master Data Rate Routing

Hello Gurus,
We need to transfer Master Data (Rate Routing) with ALE. We already configure the ALE connection. We need to know which is the Process Code in the Inbound Table.
Anyone can help us, please.
Thanks in advance.
Best Regards.

Check this link
http://help.sap.com/saphelp_47x200/helpdata/en/92/58d455417011d189ec0000e81ddfac/frameset.htm
For BOM and materials there are transaction codes...but i could not get for WC and Routing...

The growth of the internet routing table + LISP

I have been challenged with the task of putting together a 15-20 minute presentation of how I might go about solving the problem of the growth of the internet routing table.
If I am understanding the question correctly - as the internet grows so will the number of IPv4 and (moreso) IPv6 prefixes that appear in the global internet routing table. This will mean that the PE and P routers in a Service Provider network will find themselves having to deal with more prefixes that will in turn increase the possibility of bogons interferring with proper routing and increase the load on the routers themselves.
Besides being a very open ended question, I am trying to look at it from the perspective of a Service Provider (whom I work for) and have come up with the following options (admittedly this is only after a quick google on the topic):
> Improvise in the short term by adjusting CAM table allocation
> Use selective hearing by filtering prefixes that are not important
> Use external assistance like LISP and DNS
> Spend Money and upgrading existing routers to handle the load
Obviously with only a 20 minute window I cannot talk about much and I would like the options to be innnovative and interesting. LISP seems like an interesting option and I would like to learn about it - however I am having trouble tracking down resources that give a basic introduction to exactly what and how LISP works (every time I try and search for it a get pushed to sites talking about the programming language ).
So this leads me to two questions:
1. Is there anything important, vital or interesting that I have not included in my quickly put together list above.
2. Is anyone aware for a good site/resource that explains LISP from a beginners/tutorial-type perspective.

I have been challenged with the task of putting together a 15-20 minute presentation of how I might go about solving the problem of the growth of the internet routing table.
If I am understanding the question correctly - as the internet grows so will the number of IPv4 and (moreso) IPv6 prefixes that appear in the global internet routing table. This will mean that the PE and P routers in a Service Provider network will find themselves having to deal with more prefixes that will in turn increase the possibility of bogons interferring with proper routing and increase the load on the routers themselves.
Besides being a very open ended question, I am trying to look at it from the perspective of a Service Provider (whom I work for) and have come up with the following options (admittedly this is only after a quick google on the topic):
> Improvise in the short term by adjusting CAM table allocation
> Use selective hearing by filtering prefixes that are not important
> Use external assistance like LISP and DNS
> Spend Money and upgrading existing routers to handle the load
Obviously with only a 20 minute window I cannot talk about much and I would like the options to be innnovative and interesting. LISP seems like an interesting option and I would like to learn about it - however I am having trouble tracking down resources that give a basic introduction to exactly what and how LISP works (every time I try and search for it a get pushed to sites talking about the programming language ).
So this leads me to two questions:
1. Is there anything important, vital or interesting that I have not included in my quickly put together list above.
2. Is anyone aware for a good site/resource that explains LISP from a beginners/tutorial-type perspective.

How to count number of default routes in routing table

Is there a way for java to count the number of default routes in the routing table?

Hi Sathish,
If you are using table mean surely you are binding the table to some model like JSON model. You can bind the checked value of the column with the checkbox in the template. So while checking you can directly check the property by taking the reference from the model. Navigate through all the objects in the model and check the property you wanted.
This is the logic I have used to get the checked property form the table column. My table id is "tableId" and it is being binded with "/tableModelData" of json model.
var myModel = sap.ui.getCore().getElementById("tableId").getModel().getProperty("/tableModelData");
for(var i= 0 ; i< myModel.length ; i++)
var singleObject = myModel [i];
if(singleObject.checked == true){
your logic.

Eem script monitor routing table - multiple entries into 1 email

I have the following script running to report on routing table changes
event manager applet route-table-monitor
event routing network 0.0.0.0/0 ge 1
action 0.5 set msg "Route changed: Type: $_routing_type, Network: $_routing_network, Mask/Prefix: $_routing_mask, Protocol: $_routing_protocol, GW: $_routing_lastgateway, Intf: $_routing_lastinterface"
action 1.0 syslog msg "$msg"
action 2.0 cli command "enable"
action 4.0 info type routername
action 5.0 mail server "10.*.*.*" to "roger.perkin@****" from "Switch1" subject "Routing Table Change" body "$msg $_cli_result"
It works perfectly however if multiple routes change I get multiple emails.
Last night we had a site go out and I got about 20 separate email for each subnet change.
What I would like to do is get this script to take all routes changed in a 1 minute interval and then output them into an email.
Not quite sure how I would go about that?
Thanks
Roger
Currently studying for my CCIE and just started on EEM, have not done much scripting before so this is all good stuff to know.

You can't do this with one policy. However, you could accomplish this with a timer policy that will batch up the pending updates, though. Something like this would work.
event manager applet route-table-monitor event routing network 0.0.0.0/0 ge 1 action 0.5 set msg "Route changed: Type: $_routing_type, Network: $_routing_network, Mask/Prefix: $_routing_mask, Protocol: $_routing_protocol, GW: $_routing_lastgateway, Intf: $_routing_lastinterface" action 0.6 syslog msg "$msg" action 1.0 handle-error type ignore action 2.0 context retrieve key RTRCTXT variable msgs action 3.0 if $_error ne FH_EOK action 4.0 set msgs "$msg\n" action 5.0 else action 6.0 append msgs "$msg\n" action 7.0 end action 8.0 handle-error type exit action 9.0 context save key RTRCTXT variable msgs!event manager applet route-table-batcher event timer watchdog time 60 action 1.0 handle-error type ignore action 2.0 context retrieve key RTRCTXT variable msgs action 3.0 if $_error eq FH_EOK action 4.0 info type routername action 5.0 mail server "10.*.*.*" to "roger.perkin@****" from "$_info_routername" subject "Routing Table Change" body "$msgs" action 6.0 end action 7.0 handle-error type exit

VPN connection created with CMAK fails to update routing table on Windows 8.1 with error 8000ffff

When my clients connect their CMAK-created VPN, it fails to run the script to set their routing table with the following error:
Custom script (to update your routing table) failed (8000ffff)
My objective is to create a VPN connection with split tunneling - does not use the VPN connection as the client's default gateway.
All my clients are on Windows 8.1 64-bit, and are logged in with Administrative privileges
My VPN Clients are on 10.242.2.0/24, my internal network is on 10.172.16.0/24
I want only traffic for 10.172.16.0 to go via the VPN. Everything else should go via the client's internet connection
My Connection Manager Administration Kit profile, was created on Windows 2012 R2 CMAK with the following settings:
"Make this connection the client's default gateway" is UNticked on the IPv4 tab.
Define a routing table update is specified with a text file containing:
+++ Start of txt file +++
REMOVE_GATEWAY
add 10.172.16.0 mask 255.255.255.0 default metric default if default
+++ End of txt file +++
The txt file is saved in DOS/Windows format (not Unicode or UTF-8 which I've read causes problems)
I've tried everything in lower and upper case in the txt file after reading that the file might be case sensitive
The following appears on the client with logging enabled:
[cmdial32] 10:42:34
03 Pre-Init Event CallingProcess = C:\WINDOWS\system32\rasautou.exe
[cmdial32] 10:42:40
04 Pre-Connect Event ConnectionType = 1
[cmdial32] 10:42:40
06 Pre-Tunnel Event UserName = UserName Domain = DUNSetting = VPN (L2TP x64 NoGW) Tunnel DeviceName = TunnelAddress = vpn.mydomain.tld
[cmdial32] 10:42:43
07 Connect Event
[cmdial32] 10:42:43
09 Custom Action Exe ActionType = Connect Actions Description = (none) ActionPath = CMDL32.EXE. The program was launched successfully.
[cmdial32] 10:42:43
08 Custom Action Dll ActionType = Connect Actions Description = to update your routing table ActionPath = C:\Users\UserName\AppData\Roaming\Microsoft\Network\Connections\Cm\VPN64\CMROUTE.DLL ReturnValue
= 0x8000ffff
[cmdial32] 10:42:43
21 On-Error Event ErrorCode = -2147418113 ErrorSource = to update your routing table
[cmdial32] 10:42:43
13 Disconnect Event CallingProcess = C:\WINDOWS\system32\cmdial32.dll
Where can I find out what error codes 8000ffff or -2147418113 mean?

That was it. Thanks, Steven
"By default, the dial-up entry and the VPN entry have Make this connection the default gateway selected.
Leave this default in place, and remove any gateways by using the REMOVE_GATEWAY command in the routing table update file itself."
It seems counter-intuitive to leave
Make this connection the default gateway selected, when I specifically don't want that behaviour, but leaving it selected and using REMOVE_GATEWAY works for me.

VRF Best Practice: LAN only VRF, Mgmt VRF, Global Routing table or VRF?

I am setting up a routed LAN (not a WAN) environment on two 6500 switches (sup-720). My goal is to create 32 routed environments separated by logical firewalls (multi-context ASA's). So I want a âcoreâ router in each environment, and don't want to buy 32 pairs of 6500's-sorry Cisco.
Each of these environments are tied together by a core routing environment, running on the same pair of 6500's. No WAN MPLS is going on and I am trying to use VRF for each of the routed environments core router. The management functions of the 6500 shall run off the VRF Core router and ip range (the one that ties all the other VRF's together. Here is a simple diagram:
VRF1
||
FW1
||
VRFCOR
||
FW2
||
VRF2
So to go from VRF1 to VRF2, you traverse two firewalls and VRFCOR.
Several questions related to this design:
1) Am I nuts to use VRF's in this application?
2) Is there a better choice than VRF's to do what I want?
3) Should VRFCOR be the global routing table (IOW, not a VRF)? Or should be its own VRF? Another way to ask this is: Shall a router ever run entirely in VRF tables, or should there be at least one global table in use?
4) Are there problems with any management protocols on a VRF, such as NTP, AAA, SNMP, LOGGING, TELNET? Or have all those been worked out?
5) Any other suggestions?
TIA, Will

VRF is suited for such kind of an application. Refer to URL http://cisco.com/application/pdf/en/us/guest/netsol/ns171/c649/ccmigration_09186a0080851cc6.pdf to get an idea about the

How to use "Routing Table" option in Proxy service in OSB ?

Hi,
I have created Business and Proxy services in my OSB console. I have used "Custom Query" option while creating the Database Adapter and I'm passing one input parameter to the query. My input parameter is "Name".
Based on the input values for this parameter, I need to pass a corresponding values to the query. For example, If I pass the following values to "Name" input parameter (India) I need to pass "Value1" to my query -
India --> Value1
China --> Value2
America --> Value3
To achieve this requirement, I have used "Routing Table" option. I have specified the values as follows -
Expression - $body/fet:FetchCustDataInput/fet:Name
Operator- '='
Compare value - India
Service - "My Webservice"
Operaton- "My Service Operation"
In the "Request Actions:" I have added the "Add an Action --> Messaging Processing --> Replace" and provided the following values -
Replace <XPath> = $body/fet:FetchCustDataInput/fet:Name
in Variable = "Name"
with Expression = xs:string('Value1')
and selected "Replace node contents" option.
No validation errors I faced. I have created the Routing table in Proxy service. But when I try to execute the proxy service in my Test Console, I get the following error message -
"The invocation resulted in an error: Unknown error while processing message for service ProxyService OSBQueryService/FetchByCustomQuery/FetchByCustomQueryPS."
I have even enabled "Direct call" and "Include Tracing" options as well. The message under "Tracing" give "(echoing request)
Routed Service. No Service has been invoked, the request is echoed.".
Can anyone please help me to resolve this issue.
Thanks in Advance,
Udaya

Did you put any loggers in the proxy at request pipeline prior to route node ? Can you trace if the request has entered request pipeline aleast.
If not just check the transport headers under the request window in the test console. There should be a text box for entering username/password which should be left blank. I have faced this unknown exception from test console in some browsers where an incorrect username/password used to get populated here. Check this ..
Edited by: atheek1 on Jul 22, 2010 2:02 AM

How to stop windows ipv6 route table auto-update

In ipv6 , windows xp can get one global ipv6-address. how to delete the address and del the route in route table persistent? And stop route table auto update?

The WsusContent folder is filled with 256 folders that are two-characters long (e.g. 00, 0A, 0B, etc), and each of those folders are filled with exe and cab files all with what appears to be a GUID as a filename.
Currently the C:\Program Files\Update Services\WsusContent folder is 27.5GB in size with 256 folders and 15,361 files.
Classifications are confirmed matching exactly when viewed from either the WSUS console or the Software Update Point Component Properties on the CAS server:
Critical Updates
Definition Updates
Security Updates
Service Packs
Update Rollups
Updates
Product selection is confirmed matching exactly when viewed from either the WSUS console or the Software Update Point Component Properties on the CAS server:
Developer Tools (VS 2005 - 2013, etc)
Exchange 2007, 2010, 2013
Forefront Endpoint Protection 2010, TMG Definition Updates for HTTP Malware and NIS, TMG, TMG Firewall Client
BitLocker Admin
Lync 2010, Lync Server 2010 and 2013
System Center DPM 2006 and 2010
Office Dictionary updates, new dictionaires, XP, 2003, 2007, 2010, 2013
Silverlight
SQL Server 2012, 2000, 2005, 2008, 2008 R2, 2012, feature pack
System Center 2012 (all), 2012 R2 (all), 2012 SP1 (all)
Windows (all except EU browser choice and graphics drivers for 8.1 upgrade)
Admittedly we could update that list a bit, but it sounds like you don't think there should be any content downloading to the WsusContent folder at all?

SMTP routing table does not seem to be working correctly.

Why isn't the SMTP routing table working properly?

First, make sure you have the routing table setup correctly.
Entries in the Routing table are in the following format:

<incoming recipient domain>:<route to this host>

For example, if you want all mail addressed to [email protected]
to be routed to mailhost1.realdomain.com, you would add the following
line to the SMTP routing table:

virtualdomain.com:mailhost1.realdomain.com

With the above option, any mail coming in addressed to <anyone>@virtualdomain.com
will be routed to mailhost1.realdomain.com. The recipient email
address will not be re-written, so mailhost1.realdomain.com needs to
accept mail addressed to the original address, @virtualdomain.com,
even though it is in realdomain.com.

Before adding, changing or deleting any SMTP routing table entries, double-check
with the DNS Administrator that the host names you specify are valid,
registered host names. If in doubt, you can use IP addresses for the
"route to" host, but not for the "incoming recipient domain".

Wild cards can be used in mail routing table options, but they indicate that a
hostname will fill that spot. For example:

*.domain.com:mailserver1.domain.com

In the above example, any mail addressed to <anyone>@<anyhost>.domain.com
will be routed to mailserver1.domain.com. However, mail addressed to
<anyone>@domain.com will not be routed. To fix this, add this
line:

domain.com:mailserver1.domain.com

Note: You cannot use the SMTP routing table to route all mail
addressed to a specific domain to a specific account. You would need to use
a "Mail Pool" account for this, which is only available in Messaging Server
3.5+.

is this entry valid for routing table in nms v 4.15 p6
* : anotherhot.mydomain.com:5000
assuming that my anotherhost is listening and accepting on port 5000 for smtp connections. and i wanna forward all the mails to that host
regards
Prashant

Rate routing table

Similar Messages

Maybe you are looking for