Rating and adding keywords to several pictures

Hi,
Aperture manual says that all I need to do is to select the pictures I want to rate or add keywords to and then choose a rating or keyword and it will be added to all at once. This is not working for me, I only get the keyword and the rating for the first picture I chose. Any tips?
Thanks for help!
-Tuomas

1) Ensure you don't have "primary only" checked.
2) Verify that it works with ratings.
3) If it works with ratings, and not with keywords, you're using one of the methods of keywording that Aperture won't apply keywords to multiple photos. There are 3 or 4 ways of keyboarding a photo… ensure you're using one that can multi-apply.

Similar Messages

I would like to see the added keywords under the picture like iPhoto does it. Is that possible? I cannot find an answer

I would like to see the added keywords under the picture like iPhoto does it. Is that possible? I cannot find an answer in Aperture 3.2.1

Hello Wontolla, I meant the Aperture main menu, there is a sub menu "View", see the Screenshot:
Set all flags in the Metadata Display submenu as I did, to show Metadata in Viewer and Browser, and then select "Customize"
Pick the Metadata fields you want to display for all views.
Make sure, that "Contents -> Keywords" is checked.
Regards
Léonie

Adding keywords to MANY pictures with Bridge CS3?

Hi there,
I am adding keywords to over 10,000 pictures using Bridge CS3.
I'm copying the keywords from their respective sites and pasting them into the metadata fields in Bridge. (Also adding others if they are not included.) I'm also changing them to all lowercase in InDesign so they are not repeated/duplicated. (i.e. "People" and "people".)
There are many folders and sub-folders but they are all under one main folder.
Two questions:
1) Anyone know of a easier way to do this?
2) Is there a way to make the ("People" and "people") problem go away?
Mac OS X 10.5.5 Bridge CS3 2.1.1.9
Thanks.

Thanks again Jim
This was not the answer I wanted to hear. So I contacted Adobe directly- They are very quick- they responded within 24 hours via email of course and reiterated what you said- I guess I just needed "official" word from Adobe, before I went to plan B
Anyways If anyone ever has problems like this where you got a bunch of .m1v files and you need to tag them with metadata- I suggest to do what I am doing and download tmpegenc it is a great little piece of software that will convert your .m1v files to .mpg files that you can now tag within bridge, Beauty
I will NEVER export to .m1v AGAIN
Thanks TMPEG
Thanks Jim and Thanks Adobe
Best Wishes
Tony

Adding keywords to Iphoto and Finder file

I am scanning photos and adding keywords to photos in Iphoto. The original file is in Finder. Is there a way to add keywords to both the photo in Iphoto and the File in the Finder at the same time.
The Finder files are backup in case Iphoto crashes or I do something stupid and loss my photos.
Thanks

I am not sure what you mean by a referenced library.
a referenced library (the advanced option "copy imported items to the iPhoto library") has been unchecked?
Preferences/ Advanced/ Copy items to the Iphoto library ( the box has a check mark)
You then have a managed library so your photos are all copied into the iPhoto library. While there is no problem in keeping an extra copy of your original photos outside of iPhoto as long as it is on the same disk as the iPhoto library it is not a backup - any disk or computer failure will affect both equally - to have a backup it must be on different physical media
LN

How To Upload Picture And adding sound

Hi all...
Anyone if you know how to upload picture in java application and adding sound plz try to help me thx..
I need the coding for this 2 for my java application urgently//!!! I am currently using JFrame as my GUI.

Eh
Upload a picture, to what? Your PDA, an FTP server, what?
and adding sound to the picture? or just to the application? Do you want a simple "Beep", or more?
I need the coding for this 2 for my java application urgently
Thats nice, I can take it then you have read the [url http://java.sun.com/docs/books/tutorial/index.html]tutorials, search google and the forums, and then posted here? It would be much faster.
I am currently using JFrame as my GUI
Good for you.

Adding keywords to multiple photos has stopped working

All day I've been importing photos and adding keywords to them. I add some keywords to all photos during the import, then after importing I go through each photo and add additional keywords as needed. It worked fine all day, but all of a sudden when I highlight several photos and add keywords, it's only applying the new keywords to the last picture highlighted. I've closed the program (LR5) and reopened it, but that didn't help. What have I done wrong?
Thanks

Thank God for this forum! :-) Everyone is so helpful! (btw, as I read your response "d'oh" came out of my mouth.
Thank you.

In Photoshop Elements12 (with Windows 8.1) added titles to my pictures do not appear in Windows. Formerly, in PSE 6 (with Windows Vista) added tiltles also appeared in Windows.

Formerly using Photoshop Elements 6 with Windows Vista I could add (or change) titles to my pictures in the Organizer and find the same titles afterwards also in Windows. Nowadays using Photoshop Elements 12 with Windows 8.1 and adding titles to my pictures in the Organizer I do not find these titles in Windows any more. That makes me sad because I want to have the titles in Windows but adding the titles is much more comfortable in Photoshop Elements than in Windows. Please tell me: Is there a help for me?

I have a Dell U3014 as well as a couple of older Dells turned up sideways as "ears".
Other than supplying the desktop "theme" (if you can call a complete lack of style along with a fair bit of inconsistency a "theme"), the OS really shouldn't be causing you to have a washed-out desktop experience. That's more a
matter of your display driver not really doing its job. What video card do you have?
FYI, one of the reasons I like Aero Glass for Win 8.1 (a 3rd party package) is that it allows me to make the desktop more pleasant to use and helps set the client areas (i.e., where work gets done) apart from the window chrome.
From what I can see, the color-management logic in Windows 8.1 is essentially unchanged from what it was in Windows 7. That there has been NO progress in this area is really a disappointment. It's an area where Microsoft has again just stopped
trying to make improvements.
If it's at all interesting to you, here's a screen grab of a REALLY cluttered up desktop. I don't normally work this way; this was an exercise to see how much I could get running. I finally gave up starting more stuff as I grew tired
and it just kept working fine...
http://Noel.ProDigitalSoftware.com/ForumPosts/Win81/BusyDesktop.png
-Noel
Detailed how-to in my eBooks:
Configure The Windows 7 "To Work" Options
Configure The Windows 8 "To Work" Options

PSE 9 Organizer Error Adding Keyword Tags and Other Woes

Hello, everyone. I am having a ton of problems with PSE 9 Organizer. The most frustrating and biggest problem is that I believe my catalog has been corrupted beyond repair. I spent all of yesterday tagging my photos. I had no problems and everything seemed to be going well until all of the sudden, the organizer suddenly froze up. I had to use the Windows task manager just to get it to close. This happened several times. Finally, the organizer locked up my computer and I had to restart. I opened the catalog and didn't seem to have any problems at that point. I was able to view all of the images, video files etc. I was even able to open the editor from the organizer. When I tried to add a tag to a photo it gave me an error. All it said was "error adding keyword tag" then nothing. I tried to delete the photo and all it said was "error deleting photo". This "error" shows up any time I try to make any changes to all of the images. I can't add any new photos, can't delete, or add tags. I have repaired the catalog several times. It found errors the first time, but evidently that didn't fix my problem. I also optimized and deleted my thumbnail cache to see if that was the issue. Still nothing. I have other catalogs and they work fine, so it is something to do with this particular catalog. Any suggestions on what to do next? Can I move the pictures to a new catalog without losing the tags? And no, I didn't write the tags to the images because I wasn't done tagging. Besides, PSE doesn't always write the tags correctly, as you probably know. Next problem. When I first open PSE and select the organizer, it doesn't alway open. I can see it on my taskbar (Windows 7 64 bit), but I can't get the window to maximize. I have to close and open several times to get the window to open. Sometimes it randomly jumps to my second monitor like it can't decide where to go. Very frustrating. I would appreciate any suggestions about what to do. Thanks.

Back to the original question, after thinking about this for a couple days I have had two ideas for workarounds:
1) Copy my tag names into the photo metadata and create a new catalog to bring all of my images into. This will allow me to keep all of my existing tags, and it MIGHT solve the tag display problem based on a test with a couple images in a new catalog. The downsides to this are a) permanently writes my tags into the photo metadata which will be bad if I decide to change something later, b) loses all version sets, and c) loses all albums (although I don't have that many). I found instructions for this workaround at http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Merging_Catalogs.
2) Live with the lack of color tag display in Organizer, and use reverse searches to find missing tag categories. For example, if I want to find all photos that do not have a "Places" tag, I check the box next to the "Places" category (which also selects all sub-categories and tags below this). Then I go to the Options drop-down in the Find Bar and "Hide best match results" and "Show results that do not match". This gives me every image in my catalog that does not have a tag from the "Places" category, so I can go through and tag these as appropriate.
I would have gone with #1 if it weren't for the permanence of the keywords. I guess I have a commitment problem (or I just haven't got my tag hierarchy figured out yet). Instead, I am going with #2 which should give me most of what I need for now. I will still hold out some small glimmer of hope that Adobe manages a fix for this issue down the road.

Outlook 2011 for MAC, how do I stop "to protect your privacy some pictures in this message were not downloaded" I've added to safe senders and added to contacts, it still happens with every single email

Outlook 2011 for MAC, how do I stop "to protect your privacy some pictures in this message were not downloaded" I've added to safe senders and added to contacts, it still happens with every single email

Ask on the Microsoft Mac forums since it's their software you have questions about..
http://answers.microsoft.com/en-us/mac

I started making a movie and all was well. I added a few more pictures and some sound and played it back. It plays so far and then the pictures break up into colors and then the screen turns green. The sound continues.

I am making a movie from still pictures. I used no theme and then started adding pictues. When I played it back, all was well. Then I added a few more pictures and some sound. When I play iot back it plays just so far and then the sound continues, but the screen turns green or the pictures break up into colors.

Sorry, everyone. I think I may have figured out what it was all down to...........
I had left the IDE ribbon cable plugged into my third HDD, with the power cable unplugged. I did this so as not to endanger my years of work on the third drive, until Windows had setup. I have in the past, accidentally chosen the wrong partiton to format, so this seemed a good way to avoid it from then on.
This was not a problem on my old system, but it seems this system doesn't like it.
I must have left the drive completely unplugged, the times Windows did setup. Amazing really. I couldn't see the woods for the trees.
Anyway, I'm sorry to have bothered everyone with my problem.
Cheers
Marcus
edit : Sorry Syar2003, I didn't see your reply until I had posted mine. Many thanks for taking the time to try and help me, it seems as though I may have sorted it now. I am using IDE drives until I can afford SATA. But many thanks for the heads-up on the NF4-SATA compliance, I'll be sure to bare that in mind.
I didn't actually check the NVRAID/IDE ROM version before updating the bios, so I have no idea if the revision was changed when Liveupdate flashed the Bios, I'm afraid. I didn't know they would be updated at the same time.
Again, cheers
Marcus

Adding a keyword to several images in A2 - not working

I imported new RAW files into A 2 today for the first time.
I then started my normal routine of adding some of keywords to all of the images at once.
I did a select all, dragged over "Wildlife Refuge", but it was only applied to that one image instead of all of them.
In A 1 I did the exact same thing and the keyword was applied to all I selected.
Checked the manual and I do not see what I am doing wrong.
I would have thought it would still work the same way, but that is OK.
What am I missing? Something simple I am sure!
Thanks!
Charles

check to make sure primary only isn't checked under edit menu ...
icon is also the one on right side with '1' inside the rectangle ...

Adding keywords and description to filename

I've built myself an online gallery system to let my clients view and purchase their photos online. To streamline my workflow, the script that imports my photos and resizes them for web display will also parse the file name to pull out a description and tags (keywords). So I went in and added descriptions and keywords to a few test images and went to save them out to try running through the script, but when trying to save from Camera Raw neither keywords nor description were available to add to the jpg file name. I figured I could get around this by simply using Bridge to rename the NEF files using the keywords and description, then I could just have CR save the jpgs using the current filename, but even Bridge doesn't seem to be able to access this metadata (and this would add addition time to the process anyway).
I know I can work around this by simply batch renaming the sets of files that I would otherwise add this metadata to, and creating the file names manually before export, but that would add a fair amount of time into the process and eliminates me being able to use keywords in Bridge. I work two jobs right now and anything I can do to my workflow to shave precious minutes off of it is huge to me.
So I guess my questions are:
1) Is it possible to get keywords and the description into my filenames (without spending more time than this process was designed to save)?
2) If not, what's the point of having that metadata?
3) Is this functionality available in a newer version of PS?
I'm using Photoshop CS3 and the format my final JPG files need to have is: "[4 digit sequence number]_[Description]_[comma delimited keyword list].jpg"
Thanks for reading, and hopefully helping.

Sorry about that, was too early in the morning when i posted that. No, you can't use Batch Rename to add keywords to files, i was thinking about metadata in general. The point of keywords is that you can search images for keywords and you can also use the Filter panel to show only images that contain certain keywords.
If you want Bridge to have this functionality then i suggest that you make a feature request here: http://www.adobe.com/go/wish

Using Windows 7 and LR 5 when I look at the Keyword List a certain keyword has 7 pictures but when I check the Library Filter with that keyword 350 pictures are shown which includes the 7 pictures that have the keyword. Why does the Library Filter showi

Using Windows 7 and LR 5, when I look at the Keyword List a certain keyword has 7 pictures but when I check the Library Filter with that keyword 350 pictures are shown which includes the 7 pictures that have the keyword. Why does the Library Filter showing pictures that do not match the query

Dan,
Here's what's going on in the catalog you sent me, "Joel & Caitlin's Wedding". There is the keyword "gwenn", which is explicitly assigned to 7 pics. But keyword "schwartz" has a number of synonyms, including "gwenn", and it is assigned to 25 pics. There is no overlap between the two sets of pics.
I discovered these two occurrences by doing Metadata > Export Keywords, opening the exported file in an editor, and then searching for "gwenn". I found two occurrences of "gwenn":
gwenn
schwartz
{gwenn}
From this, you can see that the keyword "schwartz" has 9 synonyms, of which "gwenn" is one.
The filter criterion "Keywords Contain gwenn" will match the 7 pics that are explicitly assigned the keyword "gwenn", and it will also match the 25 pics assigned the keyword "schwartz", because that keyword has a synonym "gwenn".
This illustrates the behavior I mentioned above: The criterion "Keywords contains x" will match against any of a pic's assigned keywords, any of those keywords' ancestor keywords, and any of the synonyms of the assigned keywords and their ancestors.
So LR is operating correctly here, if not in a way that's easy to understand.
It appears that you are using the synonyms of "schwartz" to represent individual members of the Schwartz family. A better way of representing family relationships is to have a parent keyword "Schwartz", with subkeywords for each family member, e.g. "Gwenn Schwartz", "Joe Schwartz", "Jane Schwartz", etc. Repeating the family name in the subkeywords has a couple of advantages. LR usually only displays the "leaf" name of a keyword, so instead of showing you just "Joe", it will show you "Joe Schwartz", helpful when there are a number of different people whose first name is "Joe". Also, if you ever export your pics to other software, it may not understand the LR hierarchy and won't show the parent keywords, so again it's more informative to see a keyword named "Joe Schwartz" rather than "Joe".

After update 6.1.1 I can't send pictures on iMessage and im on wifi. But if I send the picture as a text message it going through. I sent out several pictures before the update now I can't.

After update 6.1.1 I can't send pictures on iMessage and im on wifi. But if I send the picture as a text message it going through. I sent out several pictures before the update now I can't.

HI,
So you have updated past this point ?
http://support.apple.com/kb/TS5419
There also seems to be no issues listed here.
http://www.apple.com/support/systemstatus/
8:44 pm Friday; April 25, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

I created a new playlist and added tunes to another. When I synched my ipod showed the new playlist heading but 0 songs, although it correctly received the new songs on the updated playlist. Tried to synch several times with the same result.

I created a new playlist and added some songs to another existing one. When I synched with my PC, it loaded the new playlist heading but 0 songs, but did add the new songs to the existing playlist. Repeated the process several times without success.

This earlier post may help.
https://discussions.apple.com/message/10859194#10859194
For me, (long winded way) I drag the playlist from the bottom tree to the iPod branch.
Then select iPod.
Click the music tab on the right window.
click sync tick music
go down to the playlist section and tick the playlist.
Apply.
Good Luck.

Rating and adding keywords to several pictures

Similar Messages

Maybe you are looking for