Rating images while in slide show mode?

Is it possible to rate images while in slide show mode? I didn't see a reference to it in the manual. If not this would be a very handy feature (you can do this in LR)

I have used full screen and other layouts to do ratings. I was running through my 1st major project and fine tune - wanted to filter out some images by lower ratings. Actually I would like to pause a slide show and do whatever to images, then continue, and have the music continue as well - without starting over. As aperture is mostly flexible in regard to adjusting image settings whenever (as compared to LR, which seems more modal), it seems like slide slow is more limited then it could be. Its sometime nicer to sit back rather than working the keyboard constantly. And i'm not thrilled about using a 3 key combo to explicitly set ratings. that's a 2 handed operation for something, so I mostly end up using the -/= keys.

Similar Messages

  • SharePoint 2010 and PowerPoint 2010: Open PPTX File in Edit Mode and Open PPSX in in Slide Show Mode

    I have the following issue while opening PowerPoint PPTX file and PPSX from the Document ID link provided by SharePoint 2010.
    Issue
    Initially when I opened PPTX file from the DOC ID link from SharePoint 2010, it is opening up in Slide Show mode which is not how we want it to be.
    For PPSX, it is opening in Slide Show mode which is what we wanted.
    Thus, I did some research online and found this article at support.microsoft.com/kb/q299824  which requires some modification to the Registry of the client machine.
    I did the change as follows
    Open Registry
    Look for “Computer\HKEY_CLASSES_ROOT\PowerPoint.Show.12”
    Set BrowserFlags value to a
    After the change, PPTX is opening in Edit Mode in PowerPoint which is correct but PPSX is also opening in Edit Mode in PowerPoint which is not correct
    This issue only occurs if I open the document from the Doc ID link in SharePoint. If the documents are downloaded, it will not have this issue.
    Questions
    Can I set PPTX to open in Edit Mode and PPSX to open in Browser Mode?
    Is this fixed as in if I change the registry setting it will affect both file types?
    Is there other ways I can achieve opening PPTX in Edit and PPSX in Browser Mode?
    [Environment]
    My Client machine is running on I.E 9 and Office 2010.
    Thank you.

    Hi,
    To make the PPTX file open in Edit mode and PPSX file open in Slide Show mode, I recommend to edit the registry key HKEY_CLASSES_ROOT\PowerPoint.Show.12 to 8.
    I tested the scenario in my environment with changing the key value to 8, after that PPTX file opened in Edit mode and PPSX file opened in Slide Show mode.
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • AppleTV: How can I see what song is playing if I am viewing my photos in slide show mode on Apple TV and streaming from my iTunes?

    How can I see what song is playing if I am viewing my photos in slide show mode on Apple TV and streaming music from my iTunes?
    Thanks.

    Thank you Winston. I guess we need to ask that this feature gets added at least as an option in an upcoming release. When someone is using shuffle, it helps to know what is playing while viewing pictures.
    Where is my Apple request button when one needs it ? :-) Cheers, C

  • How can I exchange all the images in a slide show with new ones

    I have 18 slide shows each is a different competition for our camera club. How can I exchange all the images from each slide show with new images as our club competitions commence? I am reluctant to just delete the slide show because I will have set it all back up. I want to leave the size shape and format of the show as is, but just exchange all of the current images with new ones. I am hoping there is a quick way to delete and replace all images for each show? Each slide show has around 40 images and I have 18 shows
    thank you for your help

    1. Activate "thumbnails" in the configuration panel
    2. Select one Thumbnail.
    3. Rightclick and choose "Select same"
    4. Press "backspace"
    5. Open the configuration panel and load the new images.

  • Roll over images in a slide show

    I am trying to make a slide show of before and after images for a client.
    Rather than just have them all one after the other, I want all the after images to display as normal, and the before to display on hover for each slide.
    I can make this work in a basic slide show when rather than adding an image to the Hero Image box, I use the fill and states.
    However this only allows me to do one, as I can't add any more empty Hero Image boxes (or I don't know how to do that, is it possible?)
    When I add an image via the slide show menu it appears on top of any fills, and I can't seem to give images added this way a roll over state.
    Can anyone tell me how to either add extra blank Hero Image boxes, or how to apply the effect I want to the images in the Hero Image boxes.
    Thanks in advance, if there is any further info I can provide about my problem, please let me know!
    M

    Hi,
    You cannot add multiple hero image boxes within the same Slideshow. Now , you can use different slideshows for your different images but that wont give you the slideshow effect but you will be able to see all your after images at once and then if you rollover them you would be able to see the before images.
    Now, In order to create the effect that you want, what I would suggest you is to use a 'Composition widget'. In the composition widget, you can make the triggers as small thumbnails for your images and in the Target you can set the fill as your after image and in rollover state you can use the before image. After this you can use the Autoplay feature available in the composition widget and you will get the desired result.
    Hope this helps
    Regards,
    Rohit Nair

  • ITunes classic visualizer no longer works in slide-show mode?

    I am using iTunes 8.1 (50) and have just noticed that the iTunes classic visualizer no longer works in slide show mode, which means that it just keeps the same colors and patterns without changing automatically, like it used to do. I can press "R" on the keyboard, which loads a new random collection of settings but again it just keeps them without changing. I tried also pressing "D" to go to default settings, but it did not help. Anybody else having this problem? Any ideas for a fix?

    Good to know it's not just me. Sure, the old visualizer is anything but a vital feature, but still it's cool to get some variety sometimes so I hope there comes a fix for it.

  • Is there a limit to the number of images in a slide show?

    I am making a slide show for an event and would like to use lots of pictures, is there a limit in the number of images in a folder? the number of images in a slide show?

    is there a limit in the number of images in a folder? the number of images in a slide show?
    None that I know off. But why are you asking? Did you notice any performance problems or problems to render the slideshow? Then it would help to know more about your hardware RAM, disk, CPU ..
    If you already encountered problems, you may wish to have a look at this thread - although it relates to Aperture 3, not 2:
    Is there a limit on the number of photos you can use in an Aperture slideshow?
    And as I said in that thread:
    I'd expect the limiting factor to the length of a slide show to be the patience and "Good Will" of your intended audience
    Regards
    Léonie

  • System shutting down when using slide show mode in Microsoft power point

    Microsoft Power Point shutting down while clicking slide show on MacBook Air, version mid 2012. Help solicited in resolving this!

    Hi,
    Windows unexpected reboot might also be caused by BSOD, here is a blog talking about that:
    Blue Screen of Death (BSOD)
    Please follow the instructions to collect the dump files if we found any, then upload them into onedrive and post the link here.
    Also a blog talking about crash dump files:
    Understanding Crash Dump Files
    Please take a look in the application log to see if any unexpected stop events.
    Best regards
    Michael Shao
    TechNet Community Support

  • Captions truncated in Slide Show mode

    I have a web site that I designed using iWeb 08, and like to use the full 7 line captions for pictures in some gallery pages. This works fine in normal viewing mode, but I also have Slide Show enabled; when you try to view in this mode, the black square pops up, showing the picture and controls, and works OK except for one thing: you only see about 3 lines of the caption, and there seems to be no way to scroll it.
    Does anyone have any insight on this, or know whether there is some obscure setting that I have missed, which would allow viewing the entire caption in Slide Show mode?
    Thanks

    Justin, I am having the same problem as you. I will look into what Cyclosaurus is saying to do, but it is probably a bit complicated for my brain. One thing you can do without any coding, is to space down your captions 3 or 4 times on the page where the full size version of your picture is. Then, your captions will not have a line through them when viewing in the slideshow mode that includes the thumbnails. Also, the full truncated captions will not appear in the true slideshow. I have the first line showing and then I spaced all the rest of the description down. It is hard to explain, so here is an example that I am working on for a friend. http://www.karenmardis.com/TheJewels/Pages/The_ExpressionsCollection.html One thing to note, your page has to be at least as tall as what the longest caption will need. It's a bit clumsy but it worked for me. Hope that is helpful.

  • Invalid Token while viewing Slide Show Component in Design Mode

    Hi Guys,
    I am having an issue where my SWF files that appear in a slide show component are displaying an invalid token error while in design mode in Xcelsius.  When I export the SWF file to Infoview, this error flashes on the screen for a second before the logon token is passed and the child SWF is loaded.
    I am trying to find a way to solve my issue so the invalid token error message does not appear and therefore does not get flashed to the user before the file actually loads.
    I downloaded Fix Pack 1 for SP3 because there was a line in the fixed issues detailing:
    "An Invalid logon token message appeared in Infoview when you viewed Flash objects (SWF files) that contain a QaaWS or Live Office connection."
    "This issue has been resolved".
    It is still happening even with FP 1 installed.
    Has anyone ever encountered this issue before and found a solution for it.
    Thanks in advance!!
    - Anthony

    Ok, I found out it has definitively something to do with the "Design mode could not load swiz-framework-1.0.0-RC1.swc. It may be incompatible with this SDK, or invalid. (DesignAssetLoader.CompleteTimeout)" warning. This somehow affects the loading of the mx:Image.
    Recompiling the SWC might work with the swiz swc, but there are more swc's giving this error like the google maps swc which does not have the source avalable freely.
    This is a real pain as I like to use a mockup image in Design Mode to place components exactly as provided by the design team.

  • Why do photos pixilate in slide show mode pse 11

    Photo quailty pixilates when in slide show or full screen mode in pse 11 organizer.  Used to have PhotoAlbum 2 and this did not happen, photos used in full screen mode with other software are still fine.

    Hi Dave
      The slideshow editor is only a preview window. It enables you to order and re-order your slides, transitions, pan & zoom etc. The images get rendered at the output stage e.g. when you burn a disk, save a wmv or PDF file, send to a connected TV card, or output to Premiere Elements where many other formats are available.
    To view your actual images select the first thumbnail in an Album or anywhere in the Organizer, hit F11 and click play.

  • Image quality of slide shows using Aperture 3 seems inferior to iPhoto '08

    I haven't previously used Aperture. I've been using a copy of iPhoto '08 for several years. I've shot everything in RAW for the last several years and process it in
    DXO on my Mac Pro (3 1/2 years old with 7 gigs of RAM). I then load the jpegs into iPhoto '08.
    I downloaded Aperture 3 yesterday, and it certainly is impressive in what it can do for improving existing jpegs. I think I could do most touch-ups with Aperture
    instead of Photoshop 3. Because of some glitch, I couldn't load or link to my 37,000 images from iPhoto but I did export about 4000 images as full jpegs into
    a separate file and then imported these images into Aperture. Touch-ups are an order of magnitude better that trying to use iPhoto to do the same.
    I'm an amateur and aside from a fair amount of print making and a few thousand images uploaded to a new Picasa account
    http://picasaweb.google.com/jamesn88888
    I enjoy a lot of my images via slide shows on my 23" Apple monitor, usually sequenced at 3 seconds per slide.
    Comparing slide shows of identical jpegs run with iPhoto '08 and then with the files uploaded to Aperture 3 there is a very subtle loss of definition with Aperture. It's not so
    obvious when viewing relatively large detail but is is very noticeable when running slides containing small detail. When both of these programs are just used to display static images full screen I note no difference in readability. Someone suggested that I check the preferences for preview displays. Sure enough, it was set for relatively low quality. I decided to re-do all 4000 images maximum preview display quality.
    Using the import settings that came already selected on the trial software, the total size of my
    Aperture 3 trial library was a little over 25 GB. The quality of the slide shows did not approximate
    the quality of the slide shows of the identical jpegs included in my iPhoto '08 library.
    I therefore re-processed all of the previews to the "don't limit" in the photo preferences. The total size of my Aperture 3 trial library grew from 25GB to 41.37GB, an increase of 17 GB. With 3926 jpegs in the library that means the average additional size added to each preview image was 4.33 Megabytes. Inasmuch as the original jpeg images that I imported into Aperture 3 were more in the neighborhood of 1.7 to 3.5 Megabytes each (I have DXO output most jpegs @ 90% quality- fine for my purposes), this is an extreme measure to take in order to be able to use Aperture 3 the same way that I used iPhoto '08. In comparing slide shows between the two applications I still get the feeling that there is a very slight loss in acutance when viewing the slide shows. iPhoto still wins out.
    I think that I'm better off staying with iPhoto and continuing to do the RAW processing with DXO and slight file modifications with iPhoto. More elaborate changes can continue to be done using Photoshop 3 and Viveza. It's a shame, because I really like the image processing abilities that are contained in the new Aperture.
    Have any of you compared slide show views on your computer between Aperture and iPhoto?
    Is there any workaround for best slide show viewing- importing or referencing my existing iPhoto library of 37,000 images does not work for me. My copy of iPhoto 7.1.5 get the message that Aperture cannot import or link to iPhoto earlier than 7.1.5 (?)

    I think I've solved my problem with a Google Search. I came across a free slide show generator
    (contributions requested) that shows much higher quality slide shows than either iPhoto or Aperture 3.
    You click on a folder of jpegs and it almost immediately generates thumbnails and within a few seconds
    I can be viewing a full screen, tack sharp, slideshow of all of the files in the folder. Much sharper than
    I'm used to seeing.
    I think I'll keep the Aperture 3 and use if for the purpose it's intended for in the future. I'll also redo the
    image preview files to the small size it started with and then I'll copy all of the files I'm interested in from
    iPhoto into a separate folder on another disk. I'll use Aperture to catalog and to perform image manipulations
    on but I won't try to use it as an iPhoto replacement. I don't think I'll be using iPhoto much as an image
    viewer in the future either after I finish moving my favorite pictures to the Phoenix Slides folder.
    The name of the free program is Phoenix Slides. It's free to download and try, free to keep (though I
    think you'd want to pay the small amount requested) and fast. My pictures have never looked so good
    before.
    http://blyt.net/phxslides/
    Message was edited by: Jimbo2001

  • Duplicating an image in a slide show for ending

    I need to duplicate an image in slide show to put at the end ( this image is already in the begining I need to use it at the end also).

    To duplicate a photo: Photos Menu -> Duplicate
    Regards
    TD

  • Adding images to a slide show

    I'm sure this has been asked a bazillion times here but I'm
    so new to Flash (we're talking a couple of days) that I wouldn't
    know what to search on much less what question(s) to ask. That
    having been said I'm tasked with adding images to an existing Flash
    site that has 4 slide shows (it's for a photographer). I have all
    of the .fla files and I can successfully change an image but when
    it plays it's taller than the other existing images (even though
    they are the same height in pixels) and I'm sure fixing that is
    just a couple of clicks.
    He said with false self-confidence...
    I have other, more specific, questions but it's better to ask
    them in
    this
    image to be more clear about what I'm referring to (without
    knowing the correct terminology).
    I know Photoshop, ImageReady, Illustrator and GoLive (so I'm
    no knucklehead) but Flash is a whole new ball game so I apologize
    for my ignorance. Once I get up to speed with Flash I won't be
    asking dumb stuff like this.
    As a sidebar question what's the best way to get up to speed
    with Flash? Is Lynda.com any good?
    TIA

      I had to restart and opened the file. It asked me if I wanted to try to recover the operations in process before. I said yes. Then it gave me this error which was similar to one of the first two errors I got but did not write down.
    [SQLC/interOpen] SQLError: ‘Error #3125: Unable to open the database file.’, details: ‘Connection closed.’,operation: ‘open’, detailID:’1001’

  • HT201077 Viewing shared photo stream in web browser in slide show mode

    The pictures in my photo stream used to fill the whole web page when in slide show view
    now they sit in the middle of the page surrounded by a black boarder.
    Can this behaviour be changed back to full page display?

    If you are using iOS 7, open the Photos app on your iPhone, tap Shared at the bottom, tap Edit at the top, then tap the icon next to the album you want to delete.  If you only want to delete selected photos in it, tap the album, tap Select at the top, tap the photos you want to delete, then tap the trash icon at the bottom.

Maybe you are looking for

  • Public Holiday calendar not to be taken into account for Sick Leave

    Dear All, I need help. Public Holiday calendar not to be taken into account for Sick Leave. Eg -When I employee applies for sick leave, the public holiday in between the dates shouldnt be considered. How can I configure this requirement. Please help.

  • Issues with Adobe and their Acrobat XI Pro product

    A couple of problems I am having with Adobe products. First, you tell me I can't get Acrobat XI Pro in Papua New Guinea and yet you allowed me to have the free trial. Now I want to buy it and you won't let me. Second, your chat which says is availabl

  • Some Dowloaded music that is in Itunes Music Folder Does not appear in Itun

    I downloaded about a dozen songs from itunes yesterday. Four out of twelve songs do not appear in itunes. I checked and these four missing songs are in my purchase history, these songs are in my itunes music directory on my windows xp computer and I

  • Named query problem with "like" statement

    I'm having issues with a named query that contains a 'like' statement in it. I have other named queries that have like statements that have hardcoded like values in them that work fine. (i.e. select * from foo where foo.col1 like 'foo%' ) But when th

  • Unable to connect to the database to product shared services

    Hi I got an error in configuring shared services with the Oracle server database "" Unable to connect to the database to product shared services "" I created a database that is working properly when accessed by a client. I typed everything in config