Ratings and adjustments staying on the Light Table

I'm working through the Luna and Long Apple Pro Training book. It's excellent. I've got a problem which no amount of re-reading seems to address. I know I've done something wrong, but I can't find any obvious error.
I've worked on a series of images on the Light Table and have adjusted them and rated them there. Following the book's direction, I tried to collect the best rated versions using a Smart Album. No luck--it showed nothing was rated. I was surprised to find that neither the ratings nor the adjustments showed on versions anywhere except on the Light Table itself. In other words, when I selected the Project icon, the image versions in the browser and viewer were unadjusted and unrated. Since this seems to defeat the purpose of the Light Table, I know I've done something wrong along the way.
I'm quite sure I'm not the only person to which this has happened. Anyone have any ideas where I goofed?
Thanks.

How are they being viewed at the trade shows? A digital projector connected to a computer playing the slideshow with iPhoto? An external monitor?
OT

Similar Messages

How to use a picture more than once in the light table?

when i drag a picture from my browser to the light table i get the number 1 in the thumbnail. the book suggests that we can drag more than once the same picture in the light table but i have not yet figured out how to do it? any ideas?

Indeed it do, I have that book, and you and I have both proven, beyond any doubt, the authors are incorrect.
I tried all weekend to build a light table display that would print on half of a piece of paper. I figured I'd just select all, duplicate or copy and paste and set up another display just like it. That way, I'd print one sheet, trim it in half and have two nice assemblies of the same images. Took me many hours of dicking around to arrive at my lame non-solution.
Hope someone else gives us both better advice.
bogiesan

Nsert/Update and Add Column at the same Table and at the "same" Time

Hello,
I want Insert/Update and Add Column at the same Table and at the "same" Time but in different sessions.
Example:
At first the "insert/update" statement:
Insert into TestTable (Testid,Value) values (1,5105);
After that the "add" statement:
Alter table TestTable add TestColumn number;
- sadly now I get the message: ORA-00054: resource busy and acquire with NOWAIT specified
"insert/update" statement:
Insert into TestTable (Testid,Value) values (2,1135);
After that the execute commit.
I don't know when the first session set the commit statement so I want that the DB the "Alter Table..." statement execute if it's possible.
If it's possible I want to save a repeat loop with the "Alter Table..." statemtent.
Thanks for ideas

Well I want to walk in the rain without and umbrella and still stay dry, but it ain't gonna happen.
You can't run a DDL statement against a table with transactions pending. Session 2 has to wait until session commits or rollbacks (or until the session is killed). That's just the way it is.
This makes sense if you think about it. The data dictionary has to be consistent across all sessions. If session 2 was allowed to change the table structure whilst session 1 has a pending transaction then the database is in an inconsistent state. This is easier to see if you consider the reverse situation - the ALTER TABLE statement run by session 2 does a DROP COLUMN TESTID rather than adding a column: now what should happen to session 1's INSERT statement? You have retrospectively invalidated a statement that was perfectly legal when it was executed.
If it's possible I want to save a repeat loop with the "Alter Table..." statemtent.Fnord.
Cheers, APC

Why is my keynote crashing when i try to view in the light table?

My Keynote presentation crashes when I try to view it in the light table view, and the whole system has to be restarted. The file is not huge, only 54 slides, mostly graphics and video plus a little bit of text. It is under 1GB in size, which I can usually manage without issue. Has anyone else encountered this problem? Does anyone know of a solution or a workaround? I'd be so grateful for any help. Thanks!

Try this maintenance routine which has solved quite a few issues:
1
Close all applications
2
Uninstall Keynote; this must be done with an application remover tool to delete the installation properly. Appcleaner is known to work correctly for this purpose, it is free and can be downloaded from here: Appcleaner Download
3
empty the trash
4
shutdown the Mac and restart. After the start up chime, hold down the shift key until the apple logo appears
let the Mac complete the start up procedure completely, it will take longer than usual as the hard drive is being repaired
5
go to; Applications > Utilities > Disc Utility > First Aid > Repair Disc Permissions
when this is completed restart the Mac normally
6
Reinstall Keynote using the original discs or logging into the Mac App Store and installing from there.
Post back to let others know if this helped

Getting an error while fetching the data and bind it in the Tree table

Hi All,
I am getting an error "A navigation paths parameter object has to be defined - " while fetching the data and bind it in the Tree table.
Please find the code and screenshot below
var oModel = new sap.ui.model.odata.ODataModel("../../../XXXX.xsodata/", true);
var oTable = sap.ui.getCore().byId("table");
oTable.setModel(oModel);
oTable.bindRows({
    path: "/Parent",
    parameters: {expand: "Children"}
Can anyone please give me a suggestion to rectify this?
Thanks in Advance,
Aravindh

Hi All,
Please see the below code. It works fine for me.
var oController = sap.ui.controller("member_assignment");
var oModel = new sap.ui.model.odata.ODataModel("../../../services/XXXX.xsodata/", true);
var Context = "/PARENT?$expand=ASSIGNEDCHILD&$select=NAME,ID,ASSIGNEDCHILD/NAME,ASSIGNEDCHILD/ID,ASSIGNEDCHILD/PARENT_ID";
var oTable = sap.ui.getCore().byId("tblProviders");
oModel.read(Context, null, null, true, onSuccess, onError);
function onSuccess(oEventdata){
    var outputJson = {};
    var p = 0;
    var r = {};
    try {
        if (oEventdata.results){
            r = oEventdata.results;
    } catch(e){
        //alert('oEventdata.results failed');
    $.each(r, function(i, j) {
        outputJson[p] = {};
        outputJson[p]["NAME"] = j.NAME;
        outputJson[p]["ID"] = j.ID;
        outputJson[p]["PARENT_ID"] = j.ID;
        outputJson[p]["DELETE"] = 0;
        var m = 0;
        if (j.ASSIGNEDCHILD.results.length > 0) {
            $.each(j.ASSIGNEDCHILD.results, function(a,b) {
            outputJson[p][m] = { NAME: b.NAME,
                                 ID : b.ID,
                                 PARENT_ID: b.PARENT_ID,
                                 DELETE: 1};
            m++;
        p++;
    var oPM = new sap.ui.model.json.JSONModel();
    oPM.setData(outputJson);
    oTable.setModel(oPM);
function onError(oEvent){
    console.log("Error on Provider Members");
oTable.bindRows({
    path:"/"
Regards
Aravindh

Creation of a generic extractor and data source for the FAGLFLEXA table

Hi All,
Need to create a generic extractor and data source for the FAGLFLEXA table to support AR reporting. This table contains the necessary profit center information to perform LOB reporting against the AR data.
Please advice on how to do this.
Regards, Vishal

Hi Vishal,
Its seems a simple a work out.
1.Go to RSO2 & choose the relevant option ie. whether you want to create Transactional DS, Master Data DS or Text DS.
2. Name it accordingly & then create.
3. Give description to it & then give table name FAGLFLEXA.
4. Save it & activate. If you need it to be delta enabled then click over Delta & you can choose accordingly.
If you still face some problem then do mail me at [email protected]
Assign points if helpful
Regards,
Himanshu

Why won't the date and time stay in the menu bar?

I just installed 10.6.2 and even when I use System Preferences to check the box in the Date/Time panel they flicker and disappear from the menu bar. Why won't the Date and Time stay in the Menu Bar? Any suggestions? Thanks.
Frank B

Doesn't any bring up the fact that Apple has so many customers with problems that the refuse to help unless you pay them cash? They update you and screw you over and then offer no useful troubleshooting scenarioius to help their millions of customers. It is because they want millions of our dollars. I hate Apple.

How do you add an image to the Light Table more that once

The Long/Luna book says this is possible. In the browser there is a red number in the corner of my images showing "1". Both of these things suggest that adding an image more that once is possible but I can't figure out how to do it.

I checked this further. Long/Luna say that you can add an image to a Light Table more than once on p266 of that book. Although they don't say how to do so.
Bagleturf's tutorial about the Light Table say's that's not possible.
"Two men say they're Jesus, one of them must be wrong" - Dire Straits

Can we addnew partition and sub partition in the existing table in one shor

can we addnew partition and sub partition in the existing table in one short

nav wrote:
can we addnew partition and sub partition in the existing table in one shortYes,
You can and below is the example for Range-List partition
ALTER TABLE <table_name>
   ADD PARTITION <partition_name> VALUES LESS THAN (<value>
      STORAGE (INITIAL 20K NEXT 20K) TABLESPACE <TS name> NOLOGGING
          SUBPARTITION Clause
          SUBPARTITION Clause
          SUBPARTITION Clause
          SUBPARTITION Clause
           );

HT1430 My Ipad won't start up. The apple logo appears and just stays on the screen. after a while it starts blinking every minute

My Ipad won't start up. The apple logo appears and just stays on the screen. after a while it starts blinking every minute

Try recovery mode as described here.
Note you may have to try to enter recovery mode more than one time to succeed.
HT1808

I deleted the picture in iphoto, then emptied my iphoto trash, but the picture is still showing on my computer when i go into my trash under "all images" How do you delete pictures even when you empty the trash and they stay in the computer?

I deleted the picture in iphoto, then emptied my iphoto trash, but the picture is still showing on my computer when i go into my trash under “all images” How do you delete pictures even when you empty the trash and they stay in the computer?

Wtih iPhoto 9 when the iPhoto Trash is emptied the files get moved to the Trash bin in the Dock as a second chance to change your mind. Look in the Dock's Trash bin.
OT

I use pc windows 7 i downloaded new version fire fox i cant print wirelessly to my hp printer it is set as default when i chouse it from drop down it wont let me and it stays on the konica

i use PC windows 7 i downloaded new version fire fox i cant print wireless to my hp printer it is set as default when i chose it from drop down it wont let me and it stays on the konica after down load new fire fox and chose disable option not compatible

Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

My Ipod had greenpoi0n and it stays on the boot logo and won't turn on

I Turn on my ipod and it stays on the same boot logo. I tried resetting it to factory defauts, format and all, and I think this caused it. Help Me!

That means you jailbroke it. Not a very good idea. Unjailbreak it. This forum won't be able to help you.

HT204400 I turn my Apple TV on and it stays on the setting time anWoke d date scroeen. I've tried the menu button nothing happens except the light flashes about 3 times. I'm trying to connect it to my new wifi but can't cause it won't go on the menu. Gutt

My Apple TV won't go on the menu page it stays on the time and date screen.every time I press the menu button the light flashes 3 times. Been trying to connect my new wifi but can't cause it won't get of that screen. I've treys turning it off and one still no joy. Gutted. Heip

My Apple TV won't go on the menu page it stays on the time and date screen.every time I press the menu button the light flashes 3 times. Been trying to connect my new wifi but can't cause it won't get of that screen. I've treys turning it off and one still no joy. Gutted. Heip

Dbms_redefinition package and COMPRESS attribute of the target table

Hi experts,
we have an already partitioned and compressed table under Oracle 10g R2 wich we want to move to another tablespace using online redefinition.
The table should keep the Partitions and compressed data after the move.
My question is: How much storage we must have in place for the move of the table ?
Example:
tab (compressed size) : 1000 MB
tab (uncompressed size) : 4000 MB
Seems it depends on how redefinition handles the move of the compressed data.
So if redefinition uses INSERT /* APPEND */ .... is should be roundabout 1000 MB ("compress during write")
Is this assumption correct ?
Can anybody shed some light on redefinition wich kind of compression-conserving stragetgy it uses ?
bye
BB

From the 11.2 admin guide:
Create an empty interim table (in the same schema as the table to be redefined) with all of the desired logical and physical attributes. If columns are to be dropped, do not include them in the definition of the interim table. If a column is to be added, then add the column definition to the interim table. If a column is to be modified, create it in the interim table with the properties that you want.The table being redefined remains available for queries and DML during the entire process.
Execute the FINISH_REDEF_TABLE procedure to complete the redefinition of the table. During this procedure, the original table is locked in exclusive mode for a very short time, independent of the amount of data in the original table. However, FINISH_REDEF_TABLE will wait for all pending DML to commit before completing the redefinition.>
If you did not want to create an interim table, then this approach is not going to work for you. There is no requirement for you to create anything other than the interim table, and any dependent objects can be done automatically, including materialized views. Where did you see that you have to create mview logs?

Ratings and adjustments staying on the Light Table

Similar Messages

Maybe you are looking for