Ratings HUD Not Performing Properly

Does anyone know why Rejects would show up when selecting "Show 3 Stars or better" in the rating HUD? I'm also seeing in the same collection images that have not been rated at all. It's giving me all sorts of seemingly wrong answers to whatever rating I'm trying to call up. I'm gussing it's operator error but not sure what I'm dong wrong.

I'm not sure at this point what a smart folder is. I've just been trying to work with the main folder by selecting images and rating them then going to the Rating HUD and seeing how it works. So far it's not. Guess I'll go research the Smart Folder option.

Similar Messages

Battery not performing properly

My iPhone 4 has started to not perform properly. It has the latest software installed but has started to switch itself off at random and also when charged overnight (last night) is only managed to reach 93% battery power.
It switches itself off when the power is at various stages ( not at any particular stage of depletion).
Sometimes when I retrieve it from my pocket it's off sometimes once I type in my password to wake it, it switches off halfway through.

Try fully discharging (till it shuts off and won't turn back on) and then fully recharging (100%) to reclaibrate your battery meter. You might need to do this more than once, i.e. 2-3 times. Once usually does it though. Also, 5.0.2 may come out in the next week or two that might have more 'battery fixes'.

HELP! Ipod sync not performing properly. What can I do?

Yesterday, when I clicked my Itunes icon on my desktop a message came up about some kind of update. Itunes was going to be loading new formats and I was asked if I wanted to keep files sorted. I clicked yes and then continue. I noticed it was doing all kinds of crazy stuff, so I stopped it. Now, I have songs missing, album artwork missing, songs that were supposed to be deleted are back, songs won't play all the way through on my ipod, and MOST annoying of all my ipod is not synching properly. It will get stuck synching random tracks and will just stay synching that one track forever. When I unchecked the songs the ipod was getting stuck on, it synched OK for one disc I'd uploaded. The next time I tried to synch something (5 seconds later) it got stuck. So I stopped the synch, unchecked the tracks and tried again. Now, no matter what, the moment I connect my ipod and try to synch it, it says synch complete. I'm pretty adept at Itunes. Everything is selected and deselected properly. These are not tracks I've downloaded, they're physical, actual discs (not burned discs). I've reset my ipod (holding the center and menu button) I've uploaded, unloaded, deleted, restarted, re-uploaded, checked, unchecked... everything I can possibly think of. I've tried to goole it and can find fairly similar situations, but how do you type just a few keywords into a search engine to explain all of this? Can anyone out there help me understand what may be going on? This is a HUGE pain. I really want to contact Apple about it, but I feel like I'm jumping through hoops of fire to find any decent contact information that doesn't include some fee for having my stuff fixed. I just want someone to talk this out with me. I'm fairly handy with a computer. If I can just get some additional troubleshooting options I may be able to work the problem out if it's easily fixable.

Good job explaining what has happened. That makes it much easier.
Although I am no expert, I surmise that by canceling the update, this left your library's data file "screwed up" for lack of a better phrase.
Here's what I would do:
1. Locate the location of your music on your system. It usually defaults to the C: drive under Music. Write down the file path if you need to, or remember where it is. If you don't know where it is, open Itunes, go to Edit > Preferences > Advanced and copy the file path that is in "Itunes Media folder location" field.
1.5. Go to File > Export Playlist and follow the prompts, if you can. PLEASE NOTE THAT YOU IF YOU CANNOT EXPORT YOUR PLAYLISTS, IF YOU CONTINUE THIS PROCESS YOU MAY NOT BE ABLE TO RETRIEVE THEM, AND WILL HAVE TO REBUILD THEM. (Also, note, you will not be deleting any songs or albums in your library, but the playlists are tied to the files discussed below).
2. Close Itunes.
3. Using explorer or by navigating into your C: drive either paste the file path that you copied earlier into the address bar or type it in if you wrote it down.
a. Within your library, (it may be up a directory or two, like in the one that starts with a folder "Automatically Add to Itunes") locate these files (use search as needed):
Itunes Library Extras
Itunes Library Genius
Itunes Library (the Itunes Database File)
Itunes Library (the XML file)
Itunes Music Library (XML file)
b. Select all these files by either control-clicking or shift-clicking.
c. Copy all the files by right clicking and selecting Copy.
d. Navigate to your desktop.
e. Create a new folder on your desktop by right clicking and selecting New, then Folder.
f. Name the folder Itunes Library Backup.
g. Open the folder.
h. Click once inside the empty folder and then right click and select Paste.
The above listed files should now be copied to the backup folder on your desktop.
4. Go back to your explorer page and reselect all the files above, and then delete them. (This is why you backed them up).
5. Uninstall Itunes.
6. Restart your computer.
7. Download and install the latest version of Itunes.
8. Launch Itunes. You're starting with a fresh copy of Itunes, so it will appear that you have no music. However if you keep your music in the default Itunes music location it will most likely add the music automatically.
9. If Itunes does not add any music, or asks to create a new library, tell it yes.
10. If you use a different location for the Itunes music library go to Edit > Preferences > Advanced and enter the file path of your library from earlier.
11. Finally, if you have no music in your library, in Itunes, go to File > Add Folder to Library, and then navigate to your library location. Depending on the size of your library it may take a few minutes to re-add everything.
12. Sync your Ipod.
I hope that helps. Let us know if you were successful in recreating your library.

Query HUD Not Working Properly

I am trying to do a find, based on a rating, in the Query HUD. I enter Rating is greater than or equal to 1 star. However, the find results show many images that have no stars and does not show other images that have one or more stars. What am I doing wrong?

I have resolved the problem.
afer assign query in $ssQueryText variable I used eval function:

now it works :)

Copy command called through FM SXPG_CALL_SYSTEM not performed properly

Hi Gurus,
I am calling the FM SXPG_CALL_SYSTEM with the command name as COPY maintained for windows NT server and I am passing the additional parameters with the file names ( source file <space> destination file). Source files can be picked using wild characters (for eg:filename_o_*.wrk) and all the files fetched from Source has to be placed into the one target file specified in the destination.
While performing this FM, we are getting error sometimes. suppose if there are two files present in the source, first part of first file and second part of second file is copied and not the whole file. So we are missing second part of first file and first part of second file. This happens randomly like once in a day. Can you please suggest how to rectify this error?
This is in High priority. Any immediate response is highly appreciated.
Please advice me the right forum for posting this if this is not the right forum.

Thx for the explanation, you're right! (very surprising to me)
Well, I tried on my XP SP 3 system:
When we use * or ?, then there's the issue you mention:
- For the test, I created 2 files named source1 and source2, one containing AAAA\[CTRLZ\]BBBB in my local encoding (cp1252), and the other CCCC\[CTRLZ\]DDDD.
- If I use COPY source* result, a new file "result" is created containing AAAACCCC\[CTRLZ\]. Note that \[CTRLZ\] is always added once at the end.
- If I do it with only one file but with a generic character (COPY sourc?1 result), there's the same issue.
- Same issue also if I copy a whole directory to a file (COPY directory result)
When I use COPY source1 result (only one source file, and no generic character * or ?), there's no issue.
When I use /b (COPY /b source* result), it works well. Note: be careful with /b position, COPY source* result /b, /b is ignored if it is at the end.
Doesn't explain why the beginning of a file was not copied, though.

One field is not downloading properly from ALV to EXCEL

Hi,
while downloading ALV out put to EXCEL sheet one field(CSTCTR) is not displaying properly it's truncating left and right side digits,
I have used function REUE_ALV_GRID_DISPLAY
FORM SUMMARY_REPORT .
PERFORM BUILD_FIELDCATLOG.
IF I_FINAL[] IS INITIAL.
    MESSAGE I000 WITH 'NO DATA EXIST'.
    EXIT.
ENDIF.
ST_SETTINGS-EDT_CLL_CB = 'X'.
V_REPID = SY-REPID.
SORT I_FINAL BY WERKS GEBNR PERNR.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
            I_CALLBACK_PROGRAM       = V_REPID
            I_GRID_SETTINGS          = ST_SETTINGS
           I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
           I_CALLBACK_PF_STATUS_SET = 'SET_PF_STATUS'
            IT_SORT                 = IT_SORT[]
            IT_FIELDCAT              = IT_FLDCAT[]
            IT_EVENTS                = IT_EVENTS[]
       TABLES
            T_OUTTAB                 = I_FINAL[]
       EXCEPTIONS
            PROGRAM_ERROR            = 1
            OTHERS                   = 2.
ENDFORM.           " alv_display summary_report
*&      Form build_fieldcatlog
      text
FORM BUILD_FIELDCATLOG.
WA_FLDCAT-FIELDNAME = 'WERKS'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = 'PA'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '1'.
WA_FLDCAT-KEY     = 'X'.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
WA_FLDCAT-FIELDNAME = 'GEBNR'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = 'LOC'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '2'.
WA_FLDCAT-KEY     = 'X'.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
WA_FLDCAT-FIELDNAME = 'PERNR'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = 'SAP #'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '3'.
WA_FLDCAT-KEY     = 'X'.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
WA_FLDCAT-FIELDNAME = 'ADPFN'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = 'ADP #'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '4'.
WA_FLDCAT-KEY     = 'X'.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
WA_FLDCAT-FIELDNAME = 'PERID'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = 'SSN'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '5'.
WA_FLDCAT-KEY     = 'X'.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
WA_FLDCAT-FIELDNAME = 'KOSTL'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = 'CSTCTR'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '6'.
WA_FLDCAT-KEY     = ' '.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
WA_FLDCAT-FIELDNAME = 'NACHN'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = 'LAST NAME'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '7'.
WA_FLDCAT-KEY     = ' '.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
WA_FLDCAT-FIELDNAME = 'VORNA'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = 'FORST NAME'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '8'.
WA_FLDCAT-KEY     = ' '.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
WA_FLDCAT-FIELDNAME = 'HIREDATE'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = 'HAL DATE'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '9'.
WA_FLDCAT-KEY     = ' '.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
WA_FLDCAT-FIELDNAME = 'VACDATE'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = 'VAC DATE'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '10'.
WA_FLDCAT-KEY     = ' '.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
WA_FLDCAT-FIELDNAME = 'GBDAT'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = 'BIRTHDT'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '11'.
WA_FLDCAT-KEY     = ' '.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
WA_FLDCAT-FIELDNAME = 'SENDAT'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = 'SRDATE'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '12'.
WA_FLDCAT-KEY     = ' '.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
WA_FLDCAT-FIELDNAME = 'SERADJDAT'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = 'SVCADJDT'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '13'.
WA_FLDCAT-KEY     = ' '.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
WA_FLDCAT-FIELDNAME = 'TERMDATE'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = 'TERMDT'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '14'.
WA_FLDCAT-KEY     = ' '.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
WA_FLDCAT-FIELDNAME = 'MGTXT'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = 'TERM REASON'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '15'.
WA_FLDCAT-KEY     = ' '.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
WA_FLDCAT-FIELDNAME = 'GESCH'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = '***'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '16'.
WA_FLDCAT-KEY     = ' '.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
WA_FLDCAT-FIELDNAME = 'RACKY'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = 'RACE'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '17'.
WA_FLDCAT-KEY     = ' '.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
WA_FLDCAT-FIELDNAME = 'VTEXT'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = 'VET STAT'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '18'.
WA_FLDCAT-KEY     = ' '.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
WA_FLDCAT-FIELDNAME = 'EXPAT'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = 'EXPAT'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '19'.
WA_FLDCAT-KEY     = ' '.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
WA_FLDCAT-FIELDNAME = 'DISAB'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = 'DISAB'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '20'.
WA_FLDCAT-KEY     = ' '.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
WA_FLDCAT-FIELDNAME = 'PTEXT'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = 'STAT'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '21'.
WA_FLDCAT-KEY     = ' '.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
WA_FLDCAT-FIELDNAME = 'STELL'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = 'JOB'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '22'.
WA_FLDCAT-KEY     = ' '.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
WA_FLDCAT-FIELDNAME = 'STLTX'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = 'JOB TITLE'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '23'.
WA_FLDCAT-KEY     = ' '.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
WA_FLDCAT-FIELDNAME = 'PLANS'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = 'POSITION'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '24'.
WA_FLDCAT-KEY     = ' '.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
WA_FLDCAT-FIELDNAME = 'PLSTX'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = 'POSITION T'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '25'.
WA_FLDCAT-KEY     = ' '.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
WA_FLDCAT-FIELDNAME = 'AAPCT'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = 'JOBGP'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '26'.
WA_FLDCAT-KEY     = ' '.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
WA_FLDCAT-FIELDNAME = 'EEOCT'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = 'EEO'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '27'.
WA_FLDCAT-KEY     = ' '.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
WA_FLDCAT-FIELDNAME = 'ZBAND'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = 'BAND'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '28'.
WA_FLDCAT-KEY     = ' '.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
WA_FLDCAT-FIELDNAME = 'EEOEX'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = 'FLSA'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '29'.
WA_FLDCAT-KEY     = ' '.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
*WHEN DIVG
WA_FLDCAT-FIELDNAME = 'BETRG'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = 'BW/HR'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '30'.
WA_FLDCAT-KEY     = ' '.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
WA_FLDCAT-FIELDNAME = 'ANSAL'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = 'ANNSAL'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '31'.
WA_FLDCAT-KEY     = ' '.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
WA_FLDCAT-FIELDNAME = 'WOSTD'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = 'HRS'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '32'.
WA_FLDCAT-KEY     = ' '.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
WA_FLDCAT-FIELDNAME = 'ZBONPLAN'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = 'PLAN'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '33'.
WA_FLDCAT-KEY     = ' '.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
WA_FLDCAT-FIELDNAME = 'ZTARGET'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = 'TGT'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '34'.
WA_FLDCAT-KEY     = ' '.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
ENDFORM.                    " BUILD_FIELD CATLOG

Also make sure if the reference field name and reference table name in the field cat .
There will be some fields where in when dropped to excel will not hold the field properties and may not download properly,In such cases pass the reference fileds to the field cat .
In the field cat u r using, pass this and check .
WA_FLDCAT-FIELDNAME = ' '. "
WA_FLDCAT-OUTPUTLEN = 'XX'.
WA_FLDCAT-SELTEXT_M = 'XXXXXXXXXXXXXXXXXXx'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
wa_fldcat- -
>reference field name,
wa_fldcat----
>reference table name
WA_FLDCAT-COL_POS = '25'.
WA_FLDCAT-KEY = ' '.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR WA_FLDCAT.
Br,
Vijay.

Hi ALL i have a BDC code it is not working properly

this BDC code is not working properly , when ever the file is transfering BDC is aborting in the case of   invalid material/batch comes into teh picture... so please could you ''Check for invalid material/batch combinations so they are not processed by the BDC in the program and correctly output in an exception report''
*****************************CODE HERE*****************************
S E L E C T I O N S C R E E N
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
PARAMETERS: p_file LIKE rlgrap-filename,
p_arch LIKE rlgrap-filename. "RM080107
SELECTION-SCREEN SKIP.
PARAMETERS: p_mode LIKE ctu_params-dismode DEFAULT 'N'.
SELECTION-SCREEN END OF BLOCK b1.
I N C L U D E S
INCLUDE zwm_np_stock_recon_top.
INCLUDE zwm_np_stock_recon_f01.
I N I T I A L I Z A T I O N
INITIALIZATION.
PERFORM get_interface_filename USING c_interface_file p_file.
PERFORM get_interface_filename USING c_archive_file p_arch."RM080107
S T A R T O F S E L E C T I O N
START-OF-SELECTION.
PERFORM read_file USING p_file.
PERFORM pre_processing.
E N D O F S E L E C T I O N
END-OF-SELECTION.
PERFORM process_checks.
IF w_no_change = 'X'.
WRITE: / text-b03.
WRITE: / sy-uline(34).
ELSE.
PERFORM bdc_mi09.
PERFORM file_check_report.
PERFORM bdc_report.
ENDIF.
PERFORM post_process_checks.
*-- Move the processed file to archive directory
PERFORM move_file.
...*************.........first include...................************
INCLUDE ZWM_NP_STOCK_RECON_TOP *
Data declaration ----------------------------------------------
TYPES: st_rawdata(2000) TYPE c.
TYPES: BEGIN OF st_stck_cnt,
werks TYPE iseg-werks, "plant
lgort TYPE iseg-lgort, "storage location
matnr TYPE iseg-matnr, "material number
charg TYPE iseg-charg, "batch
vfdat TYPE mch1-vfdat, "Sell by date
lwedt TYPE mch1-lwedt, "Manufacture date
quarn(8) TYPE n, "qaunrantine quantity
menge(8) TYPE n, "quantity on hand
message(1), "Message Type (E/W/I)
msg_txt TYPE t100-text, "Message Text
zerostck(1), "Zero stock identifier "RM220307
END OF st_stck_cnt.
TYPES: BEGIN OF st_batch_errors,
matnr TYPE iseg-matnr, "material number
charg TYPE iseg-charg, "batch
clabs TYPE mchb-clabs, "Stock Balance
END OF st_batch_errors.
DATA:
t_rawdata TYPE TABLE OF st_rawdata,
w_rawdata TYPE st_rawdata,
t_stck_cnt TYPE TABLE OF st_stck_cnt,
d_stck_cnt TYPE TABLE OF st_stck_cnt, "RM191006
w_stck_cnt TYPE st_stck_cnt,
t_batch_errors TYPE TABLE OF st_batch_errors,
w_batch_errors TYPE st_batch_errors,
t_messtab LIKE bdcmsgcoll OCCURS 0,
w_messtab LIKE LINE OF t_messtab,
w_no_change.
CONSTANTS: c_interface_file(26) TYPE c VALUE 'ZNP_STOCK_RECON',
c_archive_file(26) TYPE c
VALUE 'ZNP_STOCK_RECON_ARCHIVE'. "RM080107
.*************................second include..........************
***INCLUDE ZWM_NEXTPHARMA_STOKRECON_F01 .
*& Form read_file
reads NextPharma file sent through via webmethods
-->P_FILENAME
FORM read_file USING p_filename.
CLEAR: t_rawdata,
w_rawdata.
REFRESH: t_rawdata.
OPEN DATASET p_filename FOR INPUT IN TEXT MODE.
IF sy-subrc <> 0.
MESSAGE e720(01).
ENDIF.
DO.
READ DATASET p_filename INTO w_rawdata.
IF sy-subrc <> 0.
EXIT.
ELSE.
APPEND w_rawdata TO t_rawdata.
ENDIF.
ENDDO.
CLOSE DATASET p_filename.
ENDFORM. " read_file
*& Form pre_processing
Read file values into internal table
FORM pre_processing.
DATA: lw_matnr TYPE iseg-matnr.
LOOP AT t_rawdata INTO w_rawdata.
lw_matnr = w_rawdata+21(20). "RM031006
lw_matnr = w_rawdata+22(18). "RM031006
CALL FUNCTION 'CONVERSION_EXIT_MATN1_INPUT'
EXPORTING
input = lw_matnr
IMPORTING
output = lw_matnr
EXCEPTIONS
length_error = 1
OTHERS = 2.
MOVE: lw_matnr TO w_stck_cnt-matnr.
w_stck_cnt-werks = w_rawdata+14(4).
w_stck_cnt-lgort = w_rawdata+18(4).
w_stck_cnt-charg = w_rawdata+84(25).
w_stck_cnt-vfdat = w_rawdata+109(8).
w_stck_cnt-lwedt = w_rawdata+117(8).
w_stck_cnt-quarn = w_rawdata+141(8).
w_stck_cnt-menge = w_rawdata+125(8).
APPEND w_stck_cnt TO t_stck_cnt.
CLEAR w_stck_cnt.
ENDLOOP.
SORT t_stck_cnt BY werks
lgort
matnr
charg.
DELETE ADJACENT DUPLICATES FROM t_stck_cnt.
ENDFORM. " pre_processing
*& Form bdc_mi09
Run file data via BDC TCODE: MI09
FORM bdc_mi09.
DATA: t_bdcdata TYPE TABLE OF bdcdata,
w_bdcdata TYPE bdcdata,
lw_datum(10) TYPE c,
lw_count(2) TYPE n.
WRITE sy-datum TO lw_datum DD/MM/YYYY.
Front Screen
CLEAR w_bdcdata.
w_bdcdata-program = 'SAPMM07I'.
w_bdcdata-dynpro = '0700'.
w_bdcdata-dynbegin = 'X'.
APPEND w_bdcdata TO t_bdcdata.
Enter
CLEAR w_bdcdata.
w_bdcdata-fnam = 'BDC_OKCODE'.
w_bdcdata-fval = '/00'.
APPEND w_bdcdata TO t_bdcdata.
Count Date
CLEAR w_bdcdata.
w_bdcdata-fnam = 'RM07I-ZLDAT'.
w_bdcdata-fval = lw_datum.
APPEND w_bdcdata TO t_bdcdata.
Document Date
CLEAR w_bdcdata.
w_bdcdata-fnam = 'RM07I-BLDAT'.
w_bdcdata-fval = lw_datum.
APPEND w_bdcdata TO t_bdcdata.
Plant
CLEAR w_bdcdata.
w_bdcdata-fnam = 'IKPF-WERKS'.
w_bdcdata-fval = w_stck_cnt-werks.
APPEND w_bdcdata TO t_bdcdata.
Storage Location
CLEAR w_bdcdata.
w_bdcdata-fnam = 'IKPF-LGORT'.
w_bdcdata-fval = w_stck_cnt-lgort.
APPEND w_bdcdata TO t_bdcdata.
LOOP AT t_stck_cnt INTO w_stck_cnt.
Do not submit items with Errors against them
CHECK w_stck_cnt-message NE 'E' AND
w_stck_cnt-zerostck NE 'X'.
"RM220307
lw_count = lw_count + 1.
Input Screen
CLEAR w_bdcdata.
w_bdcdata-program = 'SAPMM07I'.
w_bdcdata-dynpro = '0731'.
w_bdcdata-dynbegin = 'X'.
APPEND w_bdcdata TO t_bdcdata.
Page Down
CLEAR w_bdcdata.
w_bdcdata-fnam = 'BDC_OKCODE'.
w_bdcdata-fval = '=P+'.
APPEND w_bdcdata TO t_bdcdata.
Material
CLEAR w_bdcdata.
w_bdcdata-fnam = 'ISEG-MATNR(01)'.
w_bdcdata-fval = w_stck_cnt-matnr.
APPEND w_bdcdata TO t_bdcdata.
Batch
CLEAR w_bdcdata.
w_bdcdata-fnam = 'ISEG-CHARG(01)'.
w_bdcdata-fval = w_stck_cnt-charg.
APPEND w_bdcdata TO t_bdcdata.
IF w_stck_cnt-menge NE 0.
Quantity
CLEAR w_bdcdata.
w_bdcdata-fnam = 'ISEG-ERFMG(01)'.
w_bdcdata-fval = w_stck_cnt-menge.
APPEND w_bdcdata TO t_bdcdata.
*-- Begin RM220307 - We need to create an item when the quantity is zero
*-- in file and is non-zero in SAP
ELSE.
Zero Stock indicator
CLEAR w_bdcdata.
w_bdcdata-fnam = 'ISEG-XNULL(01)'.
w_bdcdata-fval = 'X'.
APPEND w_bdcdata TO t_bdcdata.
*-- End RM220307
ENDIF.
ENDLOOP.
CHECK lw_count NE 0.
After all line items have been input
Final Screen
CLEAR w_bdcdata.
w_bdcdata-program = 'SAPMM07I'.
w_bdcdata-dynpro = '0731'.
w_bdcdata-dynbegin = 'X'.
APPEND w_bdcdata TO t_bdcdata.
Save Document
CLEAR w_bdcdata.
w_bdcdata-fnam = 'BDC_OKCODE'.
w_bdcdata-fval = '=BU'.
APPEND w_bdcdata TO t_bdcdata.
CALL TRANSACTION 'MI09' USING t_bdcdata
MODE p_mode
MESSAGES INTO t_messtab.
ENDFORM. " bdc_mi09
*& Form bdc_report
Write BDC Messages.
FORM bdc_report.
DATA: lw_text TYPE t100-text.
SKIP.
WRITE: / text-b01.
WRITE: / sy-uline(21).
SKIP.
Write BDC Messages
LOOP AT t_messtab INTO w_messtab WHERE msgspra = sy-langu.
MESSAGE ID w_messtab-msgid TYPE w_messtab-msgtyp
NUMBER w_messtab-msgnr
WITH w_messtab-msgv1
w_messtab-msgv2
w_messtab-msgv3
w_messtab-msgv4
INTO lw_text.
WRITE: / lw_text.
ENDLOOP.
ENDFORM. " bdc_report
*& Form process_checks
Perform process check before creating BDC Session
FORM process_checks.
DATA: lw_clabs LIKE mchb-clabs,
lw_menge LIKE mchb-clabs,
lw_matnr LIKE mara-matnr,
lw_charg LIKE mch1-charg,
lw_fail,
lw_vfdat TYPE mch1-vfdat,
lv_sell TYPE c, "RM191006
lv_qty(8) TYPE c. "RM191006
CLEAR: d_stck_cnt[], d_stck_cnt. "RM191006
Check if any of the stock figures differ from current stock figures
LOOP AT t_stck_cnt INTO w_stck_cnt.
lw_menge = w_stck_cnt-menge.
SELECT SINGLE clabs INTO lw_clabs
FROM mchb
WHERE matnr = w_stck_cnt-matnr
AND werks = w_stck_cnt-werks
AND lgort = w_stck_cnt-lgort
AND charg = w_stck_cnt-charg.
IF sy-subrc = 0.
IF lw_clabs NE lw_menge.
lw_fail = 'X'.
*-- Begin RM220307 - Do not create PI item if the stock is zero in the
*-- file and is zero in SAP
EXIT.
ELSEIF lw_clabs = 0 AND lw_menge = 0.
w_stck_cnt-zerostck = 'X'.
MODIFY t_stck_cnt FROM w_stck_cnt.
ENDIF.
*-- End RM220307
ELSE.
lw_fail = 'X'.
ERROR
ENDIF.
ENDLOOP.
If no differences are found set NO CHANGE Flag
IF lw_fail NE 'X'.
w_no_change = 'X'.
EXIT.
ENDIF.
Check for Errors in file data
LOOP AT t_stck_cnt INTO w_stck_cnt.
CLEAR lv_sell. "RM191006
SELECT SINGLE matnr INTO lw_matnr
FROM mara
WHERE matnr = w_stck_cnt-matnr.
IF sy-subrc NE 0.
Invalid Material (E)
w_stck_cnt-message = 'E'.
w_stck_cnt-msg_txt = 'Invalid Material'.
MODIFY t_stck_cnt FROM w_stck_cnt.
CONTINUE.
ENDIF.
SELECT SINGLE charg vfdat
INTO (lw_charg, lw_vfdat)
FROM mch1 "KOB01 - changed from MCHA
WHERE matnr = w_stck_cnt-matnr
AND charg = w_stck_cnt-charg.
AND werks = w_stck_cnt-werks.
IF sy-subrc NE 0.
Invalid Material Batch (E)
w_stck_cnt-message = 'E'.
CONCATENATE 'Invalid Material Batch for plant' w_stck_cnt-werks
INTO w_stck_cnt-msg_txt SEPARATED BY space.
MODIFY t_stck_cnt FROM w_stck_cnt.
CONTINUE.
ELSE.
IF w_stck_cnt-vfdat <> lw_vfdat.
Sell by dates do not match (W)
w_stck_cnt-message = 'W'.
w_stck_cnt-msg_txt =
'Sell by Date does not match Shelf life Expiry Date'.
MODIFY t_stck_cnt FROM w_stck_cnt.
lv_sell = 'X'. "RM191006
CONTINUE. "RM191006
ENDIF.
ENDIF.
IF w_stck_cnt-quarn > 0.
Quarantine balance not Zero (W)
w_stck_cnt-message = 'W'.
*-- Begin RM191006
*-- We do want all warning messages on the report
lv_qty = w_stck_cnt-quarn.
CONDENSE lv_qty NO-GAPS.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
EXPORTING
input = lv_qty
IMPORTING
output = lv_qty.
w_stck_cnt-msg_txt = 'Quarantine balance is not zero'.
CONCATENATE 'Quarantine balance is ' lv_qty '- not zero'
INTO w_stck_cnt-msg_txt SEPARATED BY space.
MODIFY t_stck_cnt FROM w_stck_cnt.
CONTINUE.
IF lv_sell = 'X'.
APPEND w_stck_cnt TO d_stck_cnt.
CLEAR lv_sell.
ELSE.
MODIFY t_stck_cnt FROM w_stck_cnt.
ENDIF.
*-- End RM191006
ENDIF.
ENDLOOP.
*-- Begin RM191006
*-- Finally get all the records into dummy table to report
APPEND LINES OF t_stck_cnt TO d_stck_cnt.
SORT d_stck_cnt.
DELETE ADJACENT DUPLICATES FROM d_stck_cnt.
*-- End RM191006
ENDFORM. " process_checks
*& Form file_check_report
Write warning and Error messages from File checks
FORM file_check_report.
WRITE: /2 'Material',
22 'Batch',
32 'Sell By',
45 'Message Text'.
WRITE: /2 sy-uline(115).
SKIP.
LOOP AT t_stck_cnt INTO w_stck_cnt. "RM191006
LOOP AT d_stck_cnt INTO w_stck_cnt. "RM191006
CHECK w_stck_cnt-message NE ' '.
WRITE: /2 w_stck_cnt-matnr,
22 w_stck_cnt-charg,
32 w_stck_cnt-vfdat,
43 w_stck_cnt-message,
45 w_stck_cnt-msg_txt.
ENDLOOP.
ENDFORM. " file_check_report
*& Form post_process_checks
Check Material Batches in SAP against NP File
FORM post_process_checks.
RANGES: r_matnr FOR mchb-matnr,
r_lgort FOR mchb-lgort,
r_werks FOR mchb-werks.
SORT t_stck_cnt.
LOOP AT t_stck_cnt INTO w_stck_cnt.
AT END OF matnr.
r_lgort-sign = 'I'.
r_lgort-option = 'EQ'.
r_lgort-low = w_stck_cnt-lgort.
APPEND r_lgort.
r_werks-sign = 'I'.
r_werks-option = 'EQ'.
r_werks-low = w_stck_cnt-werks.
APPEND r_werks.
r_matnr-sign = 'I'.
r_matnr-option = 'EQ'.
r_matnr-low = w_stck_cnt-matnr.
APPEND r_matnr.
ENDAT.
ENDLOOP.
Select all material batches for NP Materials
SELECT matnr charg clabs
INTO TABLE t_batch_errors
FROM mchb
WHERE werks IN r_werks
AND lgort IN r_lgort.
IF sy-subrc EQ 0.
Check if the Material Batches are in the NP file
LOOP AT t_batch_errors INTO w_batch_errors.
Disregard Batches without positive unrestricted stock
IF w_batch_errors-clabs LE 0.
DELETE t_batch_errors.
CONTINUE.
ENDIF.
READ TABLE t_stck_cnt INTO w_stck_cnt
WITH KEY matnr = w_batch_errors-matnr
charg = w_batch_errors-charg.
IF sy-subrc = 0.
DELETE t_batch_errors.
ENDIF.
ENDLOOP.
ENDIF.
CHECK NOT t_batch_errors[] IS INITIAL.
Write Batch chak results to report
SKIP.
WRITE: / text-b02.
WRITE: / sy-uline(74).
WRITE: /2 'Material',
22 'Batch'.
WRITE: /2 sy-uline(32).
SKIP.
LOOP AT t_batch_errors INTO w_batch_errors.
WRITE: /2 w_batch_errors-matnr,
22 w_batch_errors-charg.
ENDLOOP.
ENDFORM. " post_process_checks
G E T _ I N T E R F A C E _ F I L E N A M E
FORM get_interface_filename USING filename lw_path.
DATA: i_file TYPE filename-fileintern,
out_filename LIKE v_path-pathextern.
CLEAR: out_filename.
i_file = filename.
get the interface filename to be used when creating file
CALL FUNCTION 'FILE_GET_NAME'
EXPORTING
logical_filename = i_file
IMPORTING
file_name = out_filename
EXCEPTIONS
file_not_found = 1
OTHERS = 2.
IF sy-subrc = 0.
MOVE out_filename TO lw_path.
IF filename NE c_archive_file. "RM080107
CONCATENATE lw_path 'NP_StockBalance.dat'
INTO lw_path.
*-- Begin RM080107 - Add timestamp to the archived file
ELSE.
CONCATENATE lw_path 'NP_StockBalance' sy-datum sy-uzeit '.dat'
INTO lw_path.
ENDIF.
*-- End RM080107
ELSE.
ENDIF.
ENDFORM. "get_interface_filename
*& Form move_file RM080107
Move the processed file to archive directory
FORM move_file.
*-- At last move the file to archive directory
OPEN DATASET p_arch FOR OUTPUT IN TEXT MODE.
IF sy-subrc = 0.
LOOP AT t_rawdata INTO w_rawdata.
TRANSFER w_rawdata TO p_arch.
ENDLOOP.
ENDIF.
CLOSE DATASET p_arch.
DELETE DATASET p_file.
ENDFORM. " move_file

Hi,
S E L E C T I O N S C R E E N
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
PARAMETERS: p_file LIKE rlgrap-filename,
p_arch LIKE rlgrap-filename. "RM080107
SELECTION-SCREEN SKIP.
PARAMETERS: p_mode LIKE ctu_params-dismode DEFAULT 'N'.
SELECTION-SCREEN END OF BLOCK b1.
I N C L U D E S
INCLUDE zwm_np_stock_recon_top.
INCLUDE zwm_np_stock_recon_f01.
I N I T I A L I Z A T I O N
INITIALIZATION.
PERFORM get_interface_filename USING c_interface_file p_file.
PERFORM get_interface_filename USING c_archive_file p_arch."RM080107
S T A R T O F S E L E C T I O N
START-OF-SELECTION.
PERFORM read_file USING p_file.
PERFORM pre_processing.
E N D O F S E L E C T I O N
END-OF-SELECTION.
PERFORM process_checks.
IF w_no_change = 'X'.
WRITE: / text-b03.
WRITE: / sy-uline(34).
ELSE.
PERFORM bdc_mi09.
PERFORM file_check_report.
PERFORM bdc_report.
ENDIF.
PERFORM post_process_checks.
*-- Move the processed file to archive directory
PERFORM move_file.
...*************.........first include...................************
INCLUDE ZWM_NP_STOCK_RECON_TOP *
Data declaration ----------------------------------------------
TYPES: st_rawdata(2000) TYPE c.
TYPES: BEGIN OF st_stck_cnt,
werks TYPE iseg-werks, "plant
lgort TYPE iseg-lgort, "storage location
matnr TYPE iseg-matnr, "material number
charg TYPE iseg-charg, "batch
vfdat TYPE mch1-vfdat, "Sell by date
lwedt TYPE mch1-lwedt, "Manufacture date
quarn(8) TYPE n, "qaunrantine quantity
menge(8) TYPE n, "quantity on hand
message(1), "Message Type (E/W/I)
msg_txt TYPE t100-text, "Message Text
zerostck(1), "Zero stock identifier "RM220307
END OF st_stck_cnt.
TYPES: BEGIN OF st_batch_errors,
matnr TYPE iseg-matnr, "material number
charg TYPE iseg-charg, "batch
clabs TYPE mchb-clabs, "Stock Balance
END OF st_batch_errors.
DATA:
t_rawdata TYPE TABLE OF st_rawdata,
w_rawdata TYPE st_rawdata,
t_stck_cnt TYPE TABLE OF st_stck_cnt,
d_stck_cnt TYPE TABLE OF st_stck_cnt, "RM191006
w_stck_cnt TYPE st_stck_cnt,
t_batch_errors TYPE TABLE OF st_batch_errors,
w_batch_errors TYPE st_batch_errors,
t_messtab LIKE bdcmsgcoll OCCURS 0,
w_messtab LIKE LINE OF t_messtab,
w_no_change.
CONSTANTS: c_interface_file(26) TYPE c VALUE 'ZNP_STOCK_RECON',
c_archive_file(26) TYPE c
VALUE 'ZNP_STOCK_RECON_ARCHIVE'. "RM080107
.*************................second include..........************
***INCLUDE ZWM_NEXTPHARMA_STOKRECON_F01 .
*& Form read_file
reads NextPharma file sent through via webmethods
-->P_FILENAME
FORM read_file USING p_filename.
CLEAR: t_rawdata,
w_rawdata.
REFRESH: t_rawdata.
OPEN DATASET p_filename FOR INPUT IN TEXT MODE.
IF sy-subrc <> 0.
MESSAGE e720(01).
ENDIF.
DO.
READ DATASET p_filename INTO w_rawdata.
IF sy-subrc <> 0.
EXIT.
ELSE.
APPEND w_rawdata TO t_rawdata.
ENDIF.
ENDDO.
CLOSE DATASET p_filename.
ENDFORM. " read_file
*& Form pre_processing
Read file values into internal table
FORM pre_processing.
DATA: lw_matnr TYPE iseg-matnr.
LOOP AT t_rawdata INTO w_rawdata.
lw_matnr = w_rawdata+21(20). "RM031006
lw_matnr = w_rawdata+22(18). "RM031006
CALL FUNCTION 'CONVERSION_EXIT_MATN1_INPUT'
EXPORTING
input = lw_matnr
IMPORTING
output = lw_matnr
EXCEPTIONS
length_error = 1
OTHERS = 2.
MOVE: lw_matnr TO w_stck_cnt-matnr.
w_stck_cnt-werks = w_rawdata+14(4).
w_stck_cnt-lgort = w_rawdata+18(4).
w_stck_cnt-charg = w_rawdata+84(25).
w_stck_cnt-vfdat = w_rawdata+109(8).
w_stck_cnt-lwedt = w_rawdata+117(8).
w_stck_cnt-quarn = w_rawdata+141(8).
w_stck_cnt-menge = w_rawdata+125(8).
APPEND w_stck_cnt TO t_stck_cnt.
CLEAR w_stck_cnt.
ENDLOOP.
SORT t_stck_cnt BY werks
lgort
matnr
charg.
DELETE ADJACENT DUPLICATES FROM t_stck_cnt.
ENDFORM. " pre_processing
*& Form bdc_mi09
Run file data via BDC TCODE: MI09
FORM bdc_mi09.
DATA: t_bdcdata TYPE TABLE OF bdcdata,
w_bdcdata TYPE bdcdata,
lw_datum(10) TYPE c,
lw_count(2) TYPE n.
WRITE sy-datum TO lw_datum DD/MM/YYYY.
<b>select single MATNR
                   WERKS
                   CHARG
           from MCHA
           into (l_matnr, l_werks, l_charg)
           where matnr = w_stck_cnt-matnr
              and werks = w_stck_cnt-werks.
              and charg = w_stck_cnt-charg.
if sy-subrc ne 0.
continue.
endif.</b>
Front Screen
CLEAR w_bdcdata.
w_bdcdata-program = 'SAPMM07I'.
w_bdcdata-dynpro = '0700'.
w_bdcdata-dynbegin = 'X'.
APPEND w_bdcdata TO t_bdcdata.
Enter
CLEAR w_bdcdata.
w_bdcdata-fnam = 'BDC_OKCODE'.
w_bdcdata-fval = '/00'.
APPEND w_bdcdata TO t_bdcdata.
Count Date
CLEAR w_bdcdata.
w_bdcdata-fnam = 'RM07I-ZLDAT'.
w_bdcdata-fval = lw_datum.
APPEND w_bdcdata TO t_bdcdata.
Document Date
CLEAR w_bdcdata.
w_bdcdata-fnam = 'RM07I-BLDAT'.
w_bdcdata-fval = lw_datum.
APPEND w_bdcdata TO t_bdcdata.
Plant
CLEAR w_bdcdata.
w_bdcdata-fnam = 'IKPF-WERKS'.
w_bdcdata-fval = w_stck_cnt-werks.
APPEND w_bdcdata TO t_bdcdata.
Storage Location
CLEAR w_bdcdata.
w_bdcdata-fnam = 'IKPF-LGORT'.
w_bdcdata-fval = w_stck_cnt-lgort.
APPEND w_bdcdata TO t_bdcdata.
LOOP AT t_stck_cnt INTO w_stck_cnt.
Do not submit items with Errors against them
CHECK w_stck_cnt-message NE 'E' AND
w_stck_cnt-zerostck NE 'X'.
"RM220307
lw_count = lw_count + 1.
Input Screen
CLEAR w_bdcdata.
w_bdcdata-program = 'SAPMM07I'.
w_bdcdata-dynpro = '0731'.
w_bdcdata-dynbegin = 'X'.
APPEND w_bdcdata TO t_bdcdata.
Page Down
CLEAR w_bdcdata.
w_bdcdata-fnam = 'BDC_OKCODE'.
w_bdcdata-fval = '=P+'.
APPEND w_bdcdata TO t_bdcdata.
Material
CLEAR w_bdcdata.
w_bdcdata-fnam = 'ISEG-MATNR(01)'.
w_bdcdata-fval = w_stck_cnt-matnr.
APPEND w_bdcdata TO t_bdcdata.
Batch
CLEAR w_bdcdata.
w_bdcdata-fnam = 'ISEG-CHARG(01)'.
w_bdcdata-fval = w_stck_cnt-charg.
APPEND w_bdcdata TO t_bdcdata.
IF w_stck_cnt-menge NE 0.
Quantity
CLEAR w_bdcdata.
w_bdcdata-fnam = 'ISEG-ERFMG(01)'.
w_bdcdata-fval = w_stck_cnt-menge.
APPEND w_bdcdata TO t_bdcdata.
*-- Begin RM220307 - We need to create an item when the quantity is zero
*-- in file and is non-zero in SAP
ELSE.
Zero Stock indicator
CLEAR w_bdcdata.
w_bdcdata-fnam = 'ISEG-XNULL(01)'.
w_bdcdata-fval = 'X'.
APPEND w_bdcdata TO t_bdcdata.
*-- End RM220307
ENDIF.
ENDLOOP.
CHECK lw_count NE 0.
After all line items have been input
Final Screen
CLEAR w_bdcdata.
w_bdcdata-program = 'SAPMM07I'.
w_bdcdata-dynpro = '0731'.
w_bdcdata-dynbegin = 'X'.
APPEND w_bdcdata TO t_bdcdata.
Save Document
CLEAR w_bdcdata.
w_bdcdata-fnam = 'BDC_OKCODE'.
w_bdcdata-fval = '=BU'.
APPEND w_bdcdata TO t_bdcdata.
CALL TRANSACTION 'MI09' USING t_bdcdata
MODE p_mode
MESSAGES INTO t_messtab.
ENDFORM. " bdc_mi09
*& Form bdc_report
Write BDC Messages.
FORM bdc_report.
DATA: lw_text TYPE t100-text.
SKIP.
WRITE: / text-b01.
WRITE: / sy-uline(21).
SKIP.
Write BDC Messages
LOOP AT t_messtab INTO w_messtab WHERE msgspra = sy-langu.
MESSAGE ID w_messtab-msgid TYPE w_messtab-msgtyp
NUMBER w_messtab-msgnr
WITH w_messtab-msgv1
w_messtab-msgv2
w_messtab-msgv3
w_messtab-msgv4
INTO lw_text.
WRITE: / lw_text.
ENDLOOP.
ENDFORM. " bdc_report
*& Form process_checks
Perform process check before creating BDC Session
FORM process_checks.
DATA: lw_clabs LIKE mchb-clabs,
lw_menge LIKE mchb-clabs,
lw_matnr LIKE mara-matnr,
lw_charg LIKE mch1-charg,
lw_fail,
lw_vfdat TYPE mch1-vfdat,
lv_sell TYPE c, "RM191006
lv_qty(8) TYPE c. "RM191006
CLEAR: d_stck_cnt[], d_stck_cnt. "RM191006
Check if any of the stock figures differ from current stock figures
LOOP AT t_stck_cnt INTO w_stck_cnt.
lw_menge = w_stck_cnt-menge.
SELECT SINGLE clabs INTO lw_clabs
FROM mchb
WHERE matnr = w_stck_cnt-matnr
AND werks = w_stck_cnt-werks
AND lgort = w_stck_cnt-lgort
AND charg = w_stck_cnt-charg.
IF sy-subrc = 0.
IF lw_clabs NE lw_menge.
lw_fail = 'X'.
*-- Begin RM220307 - Do not create PI item if the stock is zero in the
*-- file and is zero in SAP
EXIT.
ELSEIF lw_clabs = 0 AND lw_menge = 0.
w_stck_cnt-zerostck = 'X'.
MODIFY t_stck_cnt FROM w_stck_cnt.
ENDIF.
*-- End RM220307
ELSE.
lw_fail = 'X'.
ERROR
ENDIF.
ENDLOOP.
If no differences are found set NO CHANGE Flag
IF lw_fail NE 'X'.
w_no_change = 'X'.
EXIT.
ENDIF.
Check for Errors in file data
LOOP AT t_stck_cnt INTO w_stck_cnt.
CLEAR lv_sell. "RM191006
SELECT SINGLE matnr INTO lw_matnr
FROM mara
WHERE matnr = w_stck_cnt-matnr.
IF sy-subrc NE 0.
Invalid Material (E)
w_stck_cnt-message = 'E'.
w_stck_cnt-msg_txt = 'Invalid Material'.
MODIFY t_stck_cnt FROM w_stck_cnt.
CONTINUE.
ENDIF.
SELECT SINGLE charg vfdat
INTO (lw_charg, lw_vfdat)
FROM mch1 "KOB01 - changed from MCHA
WHERE matnr = w_stck_cnt-matnr
AND charg = w_stck_cnt-charg.
AND werks = w_stck_cnt-werks.
IF sy-subrc NE 0.
Invalid Material Batch (E)
w_stck_cnt-message = 'E'.
CONCATENATE 'Invalid Material Batch for plant' w_stck_cnt-werks
INTO w_stck_cnt-msg_txt SEPARATED BY space.
MODIFY t_stck_cnt FROM w_stck_cnt.
CONTINUE.
ELSE.
IF w_stck_cnt-vfdat <> lw_vfdat.
Sell by dates do not match (W)
w_stck_cnt-message = 'W'.
w_stck_cnt-msg_txt =
'Sell by Date does not match Shelf life Expiry Date'.
MODIFY t_stck_cnt FROM w_stck_cnt.
lv_sell = 'X'. "RM191006
CONTINUE. "RM191006
ENDIF.
ENDIF.
IF w_stck_cnt-quarn > 0.
Quarantine balance not Zero (W)
w_stck_cnt-message = 'W'.
*-- Begin RM191006
*-- We do want all warning messages on the report
lv_qty = w_stck_cnt-quarn.
CONDENSE lv_qty NO-GAPS.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
EXPORTING
input = lv_qty
IMPORTING
output = lv_qty.
w_stck_cnt-msg_txt = 'Quarantine balance is not zero'.
CONCATENATE 'Quarantine balance is ' lv_qty '- not zero'
INTO w_stck_cnt-msg_txt SEPARATED BY space.
MODIFY t_stck_cnt FROM w_stck_cnt.
CONTINUE.
IF lv_sell = 'X'.
APPEND w_stck_cnt TO d_stck_cnt.
CLEAR lv_sell.
ELSE.
MODIFY t_stck_cnt FROM w_stck_cnt.
ENDIF.
*-- End RM191006
ENDIF.
ENDLOOP.
*-- Begin RM191006
*-- Finally get all the records into dummy table to report
APPEND LINES OF t_stck_cnt TO d_stck_cnt.
SORT d_stck_cnt.
DELETE ADJACENT DUPLICATES FROM d_stck_cnt.
*-- End RM191006
ENDFORM. " process_checks
*& Form file_check_report
Write warning and Error messages from File checks
FORM file_check_report.
WRITE: /2 'Material',
22 'Batch',
32 'Sell By',
45 'Message Text'.
WRITE: /2 sy-uline(115).
SKIP.
LOOP AT t_stck_cnt INTO w_stck_cnt. "RM191006
LOOP AT d_stck_cnt INTO w_stck_cnt. "RM191006
CHECK w_stck_cnt-message NE ' '.
WRITE: /2 w_stck_cnt-matnr,
22 w_stck_cnt-charg,
32 w_stck_cnt-vfdat,
43 w_stck_cnt-message,
45 w_stck_cnt-msg_txt.
ENDLOOP.
ENDFORM. " file_check_report
*& Form post_process_checks
Check Material Batches in SAP against NP File
FORM post_process_checks.
RANGES: r_matnr FOR mchb-matnr,
r_lgort FOR mchb-lgort,
r_werks FOR mchb-werks.
SORT t_stck_cnt.
LOOP AT t_stck_cnt INTO w_stck_cnt.
AT END OF matnr.
r_lgort-sign = 'I'.
r_lgort-option = 'EQ'.
r_lgort-low = w_stck_cnt-lgort.
APPEND r_lgort.
r_werks-sign = 'I'.
r_werks-option = 'EQ'.
r_werks-low = w_stck_cnt-werks.
APPEND r_werks.
r_matnr-sign = 'I'.
r_matnr-option = 'EQ'.
r_matnr-low = w_stck_cnt-matnr.
APPEND r_matnr.
ENDAT.
ENDLOOP.
Select all material batches for NP Materials
SELECT matnr charg clabs
INTO TABLE t_batch_errors
FROM mchb
WHERE werks IN r_werks
AND lgort IN r_lgort.
IF sy-subrc EQ 0.
Check if the Material Batches are in the NP file
LOOP AT t_batch_errors INTO w_batch_errors.
Disregard Batches without positive unrestricted stock
IF w_batch_errors-clabs LE 0.
DELETE t_batch_errors.
CONTINUE.
ENDIF.
READ TABLE t_stck_cnt INTO w_stck_cnt
WITH KEY matnr = w_batch_errors-matnr
charg = w_batch_errors-charg.
IF sy-subrc = 0.
DELETE t_batch_errors.
ENDIF.
ENDLOOP.
ENDIF.
CHECK NOT t_batch_errors[] IS INITIAL.
Write Batch chak results to report
SKIP.
WRITE: / text-b02.
WRITE: / sy-uline(74).
WRITE: /2 'Material',
22 'Batch'.
WRITE: /2 sy-uline(32).
SKIP.
LOOP AT t_batch_errors INTO w_batch_errors.
WRITE: /2 w_batch_errors-matnr,
22 w_batch_errors-charg.
ENDLOOP.
ENDFORM. " post_process_checks
G E T _ I N T E R F A C E _ F I L E N A M E
FORM get_interface_filename USING filename lw_path.
DATA: i_file TYPE filename-fileintern,
out_filename LIKE v_path-pathextern.
CLEAR: out_filename.
i_file = filename.
get the interface filename to be used when creating file
CALL FUNCTION 'FILE_GET_NAME'
EXPORTING
logical_filename = i_file
IMPORTING
file_name = out_filename
EXCEPTIONS
file_not_found = 1
OTHERS = 2.
IF sy-subrc = 0.
MOVE out_filename TO lw_path.
IF filename NE c_archive_file. "RM080107
CONCATENATE lw_path 'NP_StockBalance.dat'
INTO lw_path.
*-- Begin RM080107 - Add timestamp to the archived file
ELSE.
CONCATENATE lw_path 'NP_StockBalance' sy-datum sy-uzeit '.dat'
INTO lw_path.
ENDIF.
*-- End RM080107
ELSE.
ENDIF.
ENDFORM. "get_interface_filename
*& Form move_file RM080107
Move the processed file to archive directory
FORM move_file.
*-- At last move the file to archive directory
OPEN DATASET p_arch FOR OUTPUT IN TEXT MODE.
IF sy-subrc = 0.
LOOP AT t_rawdata INTO w_rawdata.
TRANSFER w_rawdata TO p_arch.
ENDLOOP.
ENDIF.
CLOSE DATASET p_arch.
DELETE DATASET p_file.
ENDFORM. " move_file
Best regards,
Prashant

Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install.

Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install. Once I wrote my password, and for now on, everytime I start the session, another window advise me that "Java SE 6" is missing, due that, the computer can't run some "CS5Service Manager". If I try to install it, the download ends with an error. If finally, you skip the istallation, you arrive to the dock, but the menu bar at the top of the screen doesn't show up.
In addition, my trackpad doesn't works either. I can move the arrow but i can't click anywhere, probably because the option of clicking by touching is disabeled and I can't performance a regular click.
I'll be very glad if someone know what the heck is happening with my computer. Anyway, I'm going to the genius bar next Saturday. Thx!

We're sorry.
We can't find the article you're looking for.
Please return to the Apple Support homepage.
Sigh.

Windows 7 Brightness and Function key not Working Properly

i have HP 15-af024AU APU Quad Core A8-7410 - (4 GB DDR3,1 TB HDD) Noteboook and it came with windows 8.1 preinstalled than i installed windows 7 ultimate.
i have problem in Display Brightness i am not able to change Brightness by function key or by manually from windows settings.
2. my Function key are not working properly . all key are fliped whiout holding function key it work as function key. 3. bluetooth is not working when i search for new device not able to find any available discouable bluetooth device. 4. wireless button software is not wokring in windows 7 i already updated my bios that available in drivers support and install alll drivers too properly so please give proper drivers for windows 7 for this product that works perfect.

Sorry that driver didn't work. You can try this graphics driver and if that doesn't work, unfortunately, I won't be able to help you with that issue. This package provides the AMD High-Definition (HD) Graphics Driver and Catalyst Control Center for supported notebook models that are running a supported operating system. For notebooks with switchable graphics modes, this package includes drivers for both graphics processing units (GPUs). Switchable graphics enable users to switch between a power-saving graphics mode (normally used under battery power) and a high-performance graphics mode. If high-definition multimedia interface (HDMI) video output is supported, this package also installs the HDMI Audio Driver. File name: sp71253.exe As far as the Fn keys being 'flipped,' I have no idea what you mean by that, or what to do about it. Did you install the software that controls the funtion keys? This package contains the HP System Event Utility, which enables special function keys on supported notebook models to be programmed. For example, HP System Event Utility enables users to press the Fn+ESC keys to view system information. This software works with the supported operating systems. File name: sp71156.exe

Mouse is not working properly on a one month old HP Pavillion 15-NO28US

I'm sure it's already been talked about on here, but I haven't found a successful fix or the same exact problem as I'm having. I went thru the latest Windows 8.1 update recently (at least I think it was the update) and when I restarted my computer yesterday the mouse was not working properly. Like a lot of other people who are complaining about it, the two-finger scrolling and other similar features are not working, but what really bothers me is the the mouse is almost acting like it was changed to a left handed mouse. I've checked the settings and it is still set on right-handed, but when I click the left mouse button the small window opens up next to where I clicked, which has the copy, delete and paste options (and other regular options) in it. When I click the right mouse button, nothing happens. Double tapping on the touchpad doesn't do anything either. I downloaded and install the latest synaptic drivers and nothing happened. I even performed a system recovery last night to reset all setting and it's still not working. This really sucks because I've only had this computer for about a month and I've already lost everything I've put on it...most importantly all of my school work and music apps. Is there anything to fix this or can anyone tell me what's going on with this stuff, before I have to call into HP and have a melt down?

Hi Kevin3047,
Thank you for your query, I will do my best to assist you!!
I understand that after updating from Windows 8 to 8.1 your mouse is not performing correctly. You have tried the built in troubleshooter but to no avail.
You checked the settings and they appear ok, but when you click the left mouse button the small window opens up next to where you clicked, which has the copy, delete and paste options (and other regular options) in it. When you click the right mouse button, nothing happens. Double tapping on the touchpad doesn't do anything either. I grasp that you did a recovery but it did not help. You also stated you lost your data once, and that in itself is extremely aggravating, I agree.
Here is a step that may help.
Go to the Command Prompt and right click on it to run as Administrator
type sfc /scannow and press enter. This will scan for corrupted files and try to repair them.
Here are links to two documents that may aid with this process.
Troubleshooting Mouse Problems (Windows 8)
Using and Troubleshooting the TouchPad or ClickPad (Windows 8)
Would you also please try a clean boot to see if it persists. Here is a Windows document to assist you.
How to perform a clean boot in Windows
If none of this has alleviated the issue, I suggest you do a Refresh Your PC to Resolve Problems (Windows 8).
If the issue still pesists, I would do a recovery again. You will be prompted during the recovery to backup your personal files to prevent data loss. I would suggest you choose yes, to prevent data loss.
Performing an HP System Recovery (Windows 8)
Restoring Files that were Backed Up Using HP Recovery Manager (Windows 8)
This will take it back to factory. Here is a document on Updating Windows 8 to 8.1 to assist you with doing the update again.
If you are still experiencing the issue, as @visruth stated I would contact HP support for assistance. They are able to remotely log onto your system to help with this difficulty.
Please call HP technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region HP Technical Support Sitemap.
Good Luck!!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Siri is not working properly

I have just updated my new ipad to ios6 yesterday, siri is not working properly how can i fix this problem?

Irishkatrina_09 wrote:
... siri is not working properly...
This is very vague...
Try this...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
There is also this...Troubleshooting Siri
http://support.apple.com/kb/TS4079

My iMac is disconnecting all my media hard drives and giving "Disk Not Ejected Properly" message since updating to OSX 10.9

Ever since I updated to OSX version 10.9 on my iMac, it is disconnecting all of my media hard drives and giving me the message: "Disk Not Ejected Properly." My hard drives are connected to my iMac through a Nitro Professional 8-port Firewire 800 hub/repeater, and a Firewire 800 cable from the Nitro hub connects to the back of my iMac. This configuration has been working fine for over a year. Suddenly, and immediately after performing the update about a week ago, the drives won't stay connected for more than a few seconds before the iMac disconnects from my drives. I've tried restarting and reconnecting many times and the same thing keeps happening.
I have a new MacBook Pro (one month old) that I've been using temporarily to work with my photos and video on these drives as the drives are able to stay connected to this computer—I put a Thunderbolt adapter onto the Firewire 800 cable to connect to it. Luckily I had not yet updated it to the new operating system and I am afraid to do that. I've had the persistent message that Updates are available for my computer on my MacBook but I will not perform any updates for fear that I will lose access to my media drives. I am a professional photographer, so it's pretty disasterous if I can't access my drives. Please advise me what to do to keep my hard discs connected to my iMac and what to do to keep this from happening with my MacBook.
Thanks in advance for your knowledge and assistance!

Hello Roma2001,
Thank you for the details of the issue you are experiencing with your FireWire hub.
I recommend following the steps in the section titled "Top troubleshooting tips" in the following article:
USB and FireWire Quick Assist
http://support.apple.com/kb/HT1151
Thank you for using Apple Support Communities.
Best,
Sheila M.

In XML Output the values of Number column tags are not displayed properly

Hi,
Our Client have been using AR Invoice Print Program for a long time and it is heavily customized. Also they are using an old version of the RDF. So we have taken the latest version of the RDF (RAXINV.rdf) for Oracle Apps 11.5.10.2 by raising a SR and implement Client's old RAXINV.rdf into it.
All was ok, but when we are running the program, the XML Output did not generate properly. For the Q_INVOICE query (G_ORDER_BY, G_INVOICE and G_INV_TERM group), the value of some of the scaler number columns are not appeared properly. The tags are coming correctly, but the value is appearing as '*', instead of the correct value. We have checked in the RDF Level (By putting srw.message and check in the log file) that those columns are having proper value. So there is no issue with the RDF.
But because of the above mentioned problem, the some of the PDF output field values also is not generated correctly.
I think that because of the lexical parameters which was implementing the Q_INVOICE query (&COMMON_QUERY) this issue is coming. Because the issue is only in the Q_INVOICE query group (G_ORDER_BY, G_INVOICE and in G_INV_TERM group) not in any other query group.
There is no problem with the scaler character columns. The issue is only with the number columns.
Also we have checked that if we hardcode the value of the number columns in the above mentioned lexical parameter, this problem doesn't appear.
If we put TO_CHAR function to those number columns in the lexical parameter (COMMON_QUERY), then this issue get solved. But we can't do it because of performance issue and also Client won't approve it.
Please help.
With Thanks and Regards

I don't know how to read the code you pasted or I would have checked this myself.
Do your fields in the internal table reference dictionary objects or elementary types? If not using dictionary types, the column names will be blank by default. If you can't change your fields to be dictionary types, you can try this to change the column names:
I made a method inside my local class to add the names:
        call method set_colname
          EXPORTING iv_tab = alv_tab
                    iv_colid = 'xxxx' "fieldname from the table
                    iv_stxt = text-t54
                    iv_mtxt = text-t55
                    iv_ltxt = text-t55.
METHOD set_colname .
data:
          alv_cols type REF TO cl_salv_columns_table,
          alv_col type REF TO cl_salv_column.
TRY .
*... Change fieldnames
        call METHOD iv_tab->get_columns RECEIVING value = alv_cols.
        call method alv_cols->get_column EXPORTING columnname = iv_colid RECEIVING value = alv_col.
        IF iv_stxt <> ''.
          CALL METHOD alv_col->set_short_text EXPORTING value = iv_stxt.
        ENDIF.
        IF iv_mtxt <> ''.
          CALL METHOD alv_col->set_medium_text EXPORTING value = iv_mtxt.
        ENDIF.
        IF iv_ltxt <> ''.
          CALL METHOD alv_col->set_long_text EXPORTING value = iv_ltxt.
        ENDIF.
   CATCH cx_salv_not_found.
ENDTRY.
ENDMETHOD. "set_colname

Since the last update to iTunes 11.0.3 (42) the airplay connection is not working properly , keeping breaking up

since the last update to iTunes 11.0.3 (42) the airplay connection is not working properly , keeping breaking up, while the airplay works fine with my iPad and iPhone. Anyone has experienced the same? any fix available?

Hi Erdelestre,
Thanks for visiting Apple Support Communities!
See this article for some tips about troubleshooting AirPlay:
Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/ts4215
Troubleshooting performance issues with AirPlay or AirPlay Mirroring
If you are experiencing intermittent playback or significant network lag with AirPlay or AirPlay Mirroring, it could be due to a weak Wi-Fi connection, interference, or the distance between the Wi-Fi router and your iOS device, Apple TV or AirPort Express. Try the following suggestions:
Ensure that other devices are not trying to stream to the same Apple TV at the same time.
Turn off Bluetooth on your iOS device by tapping Settings > General > Bluetooth.
Ensure that your Wi-Fi router is set up with the recommended settings for the best performance.
Certain external devices, such as microwave ovens and baby monitors, may interfere with a Wi-Fi network. Try moving or disabling these devices.
If possible, try to locate your Wi-Fi router in the same room as your Apple TV and iPhone/iPad.
If your wireless and wired networks are the same, try connecting your Apple TV to the router via Ethernet instead of Wi-Fi.
If the Wi-Fi router has an external antenna, check to see that is it connected properly and in good condition.
Use the Wi-Fi network troubleshooting guide to resolve interference and other issues.
Best,
Jeremy

My iPod Touch Front Camera Is Not Working Properly.

My iPod Touch Front Camera Is Not Working Properly.When I Try To Take A Picture ,It's Very ,Very Blurry. When I Put My Finger Close To The Camera It Looks Perfect. You Can See My Skin Lines{I Dont Know What They're Actually Called} It's Like It I Had It On Zoom Or Something . My Back Camera Is Perfect,And When I Put My Finger Close Its Just Blurry. Can You Help? I've Tried Everything ,Cleaning It, And Reseting It.
Please Help.
Thank You.

The poster said he has iOS 5.1 which is the latest update.
apple81 wrote:
Hi: I had the same problem but it was fixed by performing software upgrade iOS 5. Go to settings-general-slect-update software.. Fixed it right way and now is even better with more features..

Ratings HUD Not Performing Properly

Similar Messages

Maybe you are looking for