Ratio only 10x with Neo2 and 3200+

Heelp !
I have a Winchester 3200+ with Neo2 board and the max CPU ratio value is 10 !
Just upgraded from Bios 1.3 to Bios 1.36, with no prob, but the ratio problem persists ...
please help,
thx

Isn't that the correct value? I have a 3000 and my max ratio is 9
10 x 200 = 2Ghz = 3200 PR rating

Similar Messages

HT2513 my iCal calendar that I created with the color green keeps changing to purple. no matter how many times I change it to green, it turns it back to purple. Of course this only happens with iCloud and not "from my Mac". Any ideas?

my iCal calendar that I created with the color green keeps changing to purple. no matter how many times I change it to green, it turns it back to purple. Of course this only happens with iCloud and not "from my Mac". Any ideas on how to correct this? This seems like a trivial error, but it's super annoying.

I called Apple and they said that they know about this problem. It's a problem with iCloud which their Engineers know about. (there was a new iCloud release, hence...) No ETA for a fix yet. I asked that this be escalated so Engineering doesn't put it at the bottom of their fix list. I talked to a Senior Advisor and mentioned to them to have QA check their regression tests as this has happened before to me (the problem just didn't take this long to resolve). I like to use green too for important stuff, so I've resorted to creating a new calendar using the normal calendar green for events going forward. They could have picked another color besides green to have this problem with and I wouldn't have been so upset. ;-)

HT1926 I have qicktime and I have quicktime pro...but when i download certain videos they only download with sound and no pic...help

I have qicktime and I have quicktime pro...but when i download certain videos they only download with sound and no pic...help

What do you see instead of video, bobby? A green screen, pretty colors, something else?

Why is my airportxpr only working with Itunes and not with another music program

why is my airportxpr only working with Itunes and not with another music program??
I can not select/see other outputs in my sound selector.

You have not indicated which OS or which music program you have so I have listed a program called Airfoil to try for both Windows and Mac - it may work for you
for Windows - http://rogueamoeba.com/airfoil/windows/
for Mac - http://rogueamoeba.com/airfoil/mac/

D20 now only available with Windows and SATA...??

As of this morning, the Lenovo Thinkstation D20 on the US site is only available with Windows and SATA hard drives. It used to have SAS drives and DOS available.
They may just be low on inventory, or maybe... ?
FWIW
JohnV474
Solved!
Go to Solution.

Kind of funny you mention this as a few of my team members and I were digging through the CTO site today. Considering the crazy number of various parts/options that we have qualified for the S/C/D 20 platforms, there are a ton of omissions on the CTO site. I know they pull some various options from time to time because of inventory or end of life concerns, but the configs that were showing up today as available really made no sense. Unfortunately there's not a lot I can do from my side to get this resolved other than raise the complaint. I'll see what I can do though.

Why my MDM Server can only communicate with ipads and iphones with logging Junos sslvpn.

Why my MDM Server can only communicate with ipads and iphones when either of the iPhone or iPad Junos sslvpn? Any ideas
Our iPad and iPhones users have to log in to Junos SSLVPN to be able to communicate with our MDM Server (via wi-fi). Any ideas where users don't have to log in to Junos SSLVPN?

This bothers me so much. It is absolutely ridiculous. I use my Apple ID as well as a family member's Apple ID to download music.
Every once in a while I will purchase a song and it won't download correctly or will give me an error that my computer is not authorized, a solution I usually fix by deleting and redownloading the song from the cloud. This doesn't work, however, when it happens to both accounts within 90 days.
It is incredibly frustrating to me that I have paid for a song, it downloaded incorrectly, and I must wait 90 days to try downloading it again because of these assinine policies.

When I get messages from Barnes and Noble, the text is blank. If I hit reply or forward, I can then see the content. This only happens with Barnes and Noble. Any suggestions on how to view the content?

When I get messages from Barnes and Noble, the text is blank. If I hit reply or forward, I can then see the content. This only happens with Barnes and Noble. Any suggestions on how to view the content?

I'm sorry, but your sister, unless she had already turned on the "Find my iPhone" feature and the person who took the phone has not disabled it, is out of luck. She should report the theft to local police authorities, including the serial number of her iPhone. While her experience is unfortunate, there are good reasons why Apple cannot do anything else about it.
I hope she gets her phone back.
Best of luck.

4s Hotspot tethering only works with USB and BT but not with wifi

Hi,
XP sp3 - iPhone 4s with ios 5.0.1 - on Three one plan
Tethering with wifi works to a friends Samsung phone, wifi on the pc confirmed working with the apple store wifi, tethering with USB and BT works with good connection speeds on my laptop but when i try to tether with wifi it connects to the laptop at 54mbps and all appears well, even claims to have received a small amount of data packets, but no data comes to any browser. The iPhone reports 1 connection to the hotspot and stays connected with a non-pulsing blue bar after the first minute.
In the PC i have tried this http://windows.microsoft.com/en-US/windows7/Change-the-order-of-network-protocol -bindings
I've deleted my firewall (zone alarm) completely and turned off windows firewall to go naked surfing for a second even though they don't cause a problem with USB tethering, makes no difference
I've deleted the network connection numerous times
"repaired" connection
dissabled and enabled the wifi
turned off the wireless with a hardware switch and on again
disabled bluetooth
rebooted many times
reinstalled itunes (latest)
loads more things i can't remember
This is causing me a nightmare. I've been through everything i can find online, been to the Apple store genius bar (genius appeared to have sub zero knowledge / interest as it involved a MS machine), been to a Three shop (legally not allowed to touch my PC apparently) and been to a Sony shop (laptop make, not their fault if my iphone doesn't work). All very frustrating.
Please help if you can! Any suggestion will be tried unless it involves sledge hammers or lakes, and only then for a few more days at most.

Turned off bluetooth on phone, turned off hotspot and on again, phone asked if i wanted to turn on bluetooth or go with USB and wifi only, said usb/wifi only. Still nothing. Rebooted PC and iphone. Turned on hotspot, pc seemlessly connects to network, still no data comes.
One odd thing is zone alarm asks me to "select a security zone for the wireless network at ip address: *******.0" every time and doesn't seem to remember the setting over sessions. When i get the status of the connection the ip address is *****.2 and default gateway is same ********.1 Not sure if that's anything.
Also getting a javascript error about an undefinded component (trustcheckermozilla) since i updated zonealarm but as i said even completely uninstalling zonealarm made no difference. I'll update firefox as well but tried with IE and still no data.

How can I prevent my screen getting covered with black and white lines while working on the internet which only happens with firefox and only go when I 'go back' or go down a page?

It happens as I surf - horizontal black and white lines particularly when I scroll down and only goes if I can go to a new page or go back a page. It is driving me crazy and only happens with firefox. I have disabled all plug ins but it still happens.

Try to disable hardware acceleration.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
If disabling hardware acceleration works then check if there is an update available for your graphics display driver.
*https://support.mozilla.org/kb/how-do-i-upgrade-my-graphics-drivers

Random reboots K8T Neo2 and 3200+

I am still getting the random reboots. I have noticed the most reboots when having alot of windows open in my web browser, both firefox and maxthon. I have done full virus scan and run both adaware and spybot with no change. Right now I am using 1 windows with my browser and no problem. I can also play games that have high system requirements, AAO and BF2 neither causes any problems. Anyone have a answer or clue to what is happening? Core center says my cpu temp is running what I call wide 37-51 degrees. The fan speed changes alot also. Is there a way to lock the fan speed and still use core center? I don't remeber but think my Intel and 865PE Neo2 setup the fan speed stayed constant.
Thanks
Mickey

Bios 3.3
Cpuz info
CPU-Z Report
CPU-Z version 1.29.
CPU(s)
Number of CPUs   1
Name   AMD Athlon 64 3200+
Code Name   Winchester
Specification   AMD Athlon(tm) 64 Processor 3200+
Family / Model / Stepping   F F 0
Extended Family / Model   F 1F
Brand ID   4
Package   Socket 939
Core Stepping   DH8-D0
Technology   0.09 µ
Supported Instructions Sets   MMX, Extended MMX, 3DNow!, Extended 3DNow!, SSE, SSE2, x86-64
CPU Clock Speed   2000.1 MHz
Clock multiplier   x 10.0
HTT Bus Frequency   200.0 MHz
L1 Data Cache   64 KBytes, 2-way set associative, 64 Bytes line size
L1 Instruction Cache   64 KBytes, 2-way set associative, 64 Bytes line size
L2 Cache   512 KBytes, 16-way set associative, 64 Bytes line size
L2 Speed   2000.1 MHz (Full)
L2 Location   On Chip
L2 Data Prefetch Logic   yes
L2 Bus Width   128 bits
Mainboard and chipset
Motherboard manufacturer   MSI
Motherboard model   MS-6702E, 1.0
BIOS vendor   American Megatrends Inc.
BIOS revision   Version 07.00T
BIOS release date   04/02/01
Chipset   VIA K8T800 Pro rev. 00
Southbridge   VIA VT8237 rev. 00
Sensor chip   Winbond W83627THF
Graphic Interface   AGP
AGP Status   enabled, rev. 3.0
AGP Data Transfer Rate   8x
AGP Max Rate   8x
AGP Side Band Addressing   supported, enabled
AGP Aperture Size   128 MBytes
Memory
DRAM Type   DDR-SDRAM
DRAM Size   512 MBytes
DRAM Frequency   200.0 MHz
FSB:DRAM   CPU/10
CAS# Latency   2.5 clocks
RAS# to CAS#   3 clocks
RAS# Precharge   3 clocks
Cycle Time (TRAS)   7 clocks
Bank Cycle Time (TRC)   11 clocks
DRAM Idle Timer   16 clocks
# of memory modules   2
Module 0   Kingston DDR-SDRAM PC3500 - 256 MBytes
Module 1   Kingston DDR-SDRAM PC3500 - 256 MBytes
Software
Windows version   Microsoft Windows XP Professional Service Pack 2 (Build 2600)
DirectX version   9.0c
Cell menu
Dram clock manual
Memory clock DDR400
Cas latency 2.5
Burst length 8Beat
Bank interleaving Auto
Trcd 3clk
Tras 7clk
Trp 3clk
Dram 1 timing enabled
High performance mode manual
cool n quiet disabled
HT frequency 1000mhz
Dynamic overclocking disabled
Adjust cpu ratio auto
Adjust fsb frequency 200mhz
Agp frequency By default
HT voltage auto
memory voltage 2.6
Cpu voltage auto
Agp voltage auto
Spread spectrum enabled
Curently using the 4n1 453 drivers Had used newest version 500a from viaarena
Clean install again today currently using ati 5.2 video driver have used newest 5.7 and 5.8 when I had the newest via chipset drivers installed.

Problem with NEO2 and sata controller card

1.Product Type: MSI K8N Neo2 Platinum (MS-7025)
and the controller card is a InnoVision DM-8301 and the hard drive is a Seagate ST3320620AS
2.BIOS version: The newest one, 1C0 or something.
3.External VGA Type: Geforce 6800 GT
4.CPU Type: AMD 64 3500+
5.Memory Type: G Skill ZX 2048mb.
6.Power Supply Type:
7.Operating System: Xp Pro
8.Problem Description:
Hello. I have a strange problem with my controllercard. I wrote this text to InnoVision suport and they send me files and bios updates for a whole week and it was still the same problem. And then i tried the card in an older computer and everything worked fine.
I wrote
"Hello. I got some problems with my new controller card. I can find my new harddrive ,that's conected to the controller card, when iam inside windows and it's seems to be no problem. I can look on every seting on it and everywhere i look i can read "No problem". I Also did some test with the seatools programe and everything was fine. But when i schould copy files to it the coumputer start lagging after a few seconds and i cant do anything. After a while i can move the mouse around but the it laggs again. My computer is overclocked at the time but i have tried to use the harddrive when it's not clocked also. Also when im goin in to teh controlpanel and starts the setings for Sillicon Images sata controll and have music on my computer, the music laggs for a very very short moment. Something must be wrong and i can not find it."
It's still the same problem in my computer. The older computer had a MSI moderboard with a VIA chip and i have a nForce 3. InnoVison said i should talk to you about this problem. I have 3 harddrives but i use this controllercard because i want to have my computer overclocked and then i can't use 2 of the sata ports as i think you know.
I would be very thankful if you could help me with this problem.
//Martin

I've used a noname SATA pci card (non raid) with SIL3112 on my neo2 without problems with 1C bios.
Think you may try with a disk lower than 48bitLBA need (137GB barrier), eg a 120GB disk
Quote:
have the InnoVision EIO DM-8301 and had alot of problems using it with WD 160MB SATA drive.
I am using Intel 865 based MB with 2 original SATA channels. The original SATA channels are bootable.
I could not used the EIO card with 160G HDD. The whole setup is working only after I connected oine of my 120G Segate SATA HDD to the EIO Sata card.
I think this card do not properly support HDD above 120G.
Please respond to: [email protected]
http://www.devhardware.com/forums/storage-devices-80/sata-as-boot-20080-2.html
Btw: you have xp sp2 ?
48bitLBA is not enabled in the first version.
http://www.48bitlba.com/winxp.htm
Edit:
Here's another with complete different setup and same problems
http://forum.tweakxp.com/forum/Topic212148-4-1.aspx
I doubt it has anything to do with your motherboard and/or bios.
Btw: I looked at innovision and their drivers in download area are very old.
Get the latest SIL3112 drivers for XP here:
http://www.siliconimage.com/support/supportsearchresults.aspx?pid=63&cid=3&ctid=2&osid=4&
And remember 3112 is sata150 only , so it's not sure it will work with your drive at all .
Anyway it should be set to fixed sata1.5G with jumper - not certain the controller can autonegotiate
without trouble. You cannot have command queing enabled either , disk support only NCQ and controller TCQ
so having command queing set ON will cause major conflicts in data transfers.

PDF Embedding only work with rwservlet, and not rwserver?

For 9iAs 9.0.2.x the PDFEMBED command is documented as being allowed with rwservlet, but not rwserver. Since we are only running rwserver (for batch-only reports), does that mean that embedding PDF fonts in the reports will not happen?
TIA,
ROC

Hi there foxsquirrel3,
You may want to try force closing all open apps and resetting the device as an initial troubleshooting step. Take a look at the articles below for more information.
iOS: Force an app to close
Turn your iOS device off and on (restart) and reset
-Griff W.

Narrowing down stability issues with NEO2 and PSU

I have been having problems for 1-2 weeks now with my setup and i am very thankfull to this forum for leading me to the point that i am now. Using Prime95 i think that i have been able to narrow my problem down to PSU being the culprit.
I was initally getting intermittant problems trying to POST (cd drives keep initiallizing) and seemed to solve this by getting my 6800GT a molex connector with nothing else on it. This was not the solution as i continued to get BSOD's, and general instability. Memtest off a boot CD was always fine but Prime95 never made it past the 2nd test, usually failing quite quickly. I then pulled everything but my SATA Raid 0 array off the board and swapped out the 6800GT card with a Radeon 9000. Prime95 worked! Tested for 5 hours no problem. Then i added my floopy,CDDrives,USB devices and now i am fully loaded and Prime95 tests NO PROBLEM.
68000GT appears to push my dual rail 12v PSU over the edge. My 520 volt OCZ PSU comes on tuesday and i hope that i will finally have a stable kick ass system.
I just wanted to post this for all others to view and comment, as my config is probably a very common one (actually i built it based upon sharky extreme's reccomendation!! see: http://www.sharkyextreme.com/guides/MHGSBG/article.php/3415901 - this is exactly my config except for i have the XMS memory and some other add ons) I am real disapointed with AMD/MSI for not being more forthcoming about PSU requirements, as i have spent a good 10 hours troubleshooting this problem, lost some needed sleep, etc.)

Well - it is finished.
My problems are 100% solved!!
I have determined that 2 symptoms existed. With my current config, i was getting false starts from a cold boot (about 1 in 4). Over time, i also noticed instability and BSOD's, corruption etc.
Step 1 - this forum - thanks for all the advice
Step 2 - Upgrade power supply. This ELIMINATED my BSOD's although there was minor stuff happening (event viewer with littered dead bodies, certain programs would not run) but i feel this was a result of running at full load with inadequate PSU
Step 3 - Shame on me for not doing it sooner, but upgrading bios to 1.3 solved the false start problem. I dont know how, i can only assume some incompatabilty with a piece of hardware i had with 1.2 was causing the problem.
Step 4 - format and reinstall. I have been working FLAWLESSLY for 3+ days now without 1 crash, false start, or any weirdness whatsover. My system is purring!
I would like to thank all for your reminders and ideas, as this was the longest 2 weeks for me. I have never had a problem with a build like this and i was ONE DAY from RMA'ing the board. I am glad i did not.
Advice to all - 1) purchase an adequate PSU 2) If you have 1.2 bios, dump it!
PS - also, thanks for the reccomendation NOT to install the IDE driver from Nvidia, my CDDrive never really worked right until this latest install and the only difference from the last XP install was that i did NOT install that driver.
Thanks Again!

HT4623 My iPad 2 audio only works with headphones and orientation does not work at all

My iPad 2 volume button does not work with the integrated speakers of my iPad, once a headphone is connected to the jack output of my iPad the OSD volume displays fine and works to the external headphone but once the headphone jack is removed, there is no more a volume bar and the side volume buttons don't work at all, this has affected the screen orientation as well, screen does not orientate as well,
Please help

If you deleted files from the operating system, you wrecked your installation and the first thing you need to do is either restore those files from a backup or reinstall the OS. Doing that is never the solution to any problem. Back up all data before making any changes.

I attach a file in mail and the whole thing shows there ie. attach a PDF and the whole pdf content is displayed in the mail. Anyone know how I just get the icon toi appear as the attachment rather than the whole file? This only happens with pdf and jpg

Hi Folks,
When I attach a jpg or pdf to a mail it shows as the whole document "pasted" into the mail. Anyone know how I get the file to just show as an icon and not as a mass of pasted in docs?
Thanks,
Pedro

For your own viewing, you can of course control-click on the attachment and select "View as Icon".
For others' viewing, it depends upon their email reader. To ensure that attachments are not displayed expicitly you can put them all in a zip file (via control click and "Compress") then attaching them, or you can use third party stuff like Attachment Tamer.
charlie

Ratio only 10x with Neo2 and 3200+

Similar Messages

Maybe you are looking for