Raw 6.7 RC forces use of process 2010. Why and What is the point?*

I installed it and every time I try to make a picture use the 2012 item it forces me to use the old one. I have never seen such a useless go round the pole! Far as I see it does nothing. At least LR4 lets you use the thing. If this is what it does how do I uninstall? Thank you for the time to answer. Richard

Sorry, I do not see the point here. CR 6.7 is the current one used w/ CS5. If you have CS5 you need to keep CR 6.7. My original question was about the interface of CR 7 (in LR4!) and CS5. Adobe will (would not) not let CS5 use CR 7. If you use the beta of LR4 like I did then you might see the same question. The answer to that is that when/if you get CS6, the problem will go away as they then have the same version. Additionally, it is correct that, using LR4, either beta or purchased, you can use the "render in lightroom" option in the Camera Raw dialog box that comes up and it will then open in CS5 if you choose not to upgrade. hope ths is a bit more clear and helpful.

Similar Messages

Photoshop and Illustrator updates fail using Adobe Application Manager, why and what can I do?

In the Adobe Application Manager, it says there are updates for both Photoshop and Illustrator. When I click to update, they both downloaded and attempted to install and in the middle of this process, Application Manager shows that the updates fail. After this, upon restart of my Mac–running Lion–Illustrator shows that it's up to date in the Application Manager and Photoshop shows an update is available. Upon trying to re-update Photoshop again, the update fails again and again.
I have updated before a few days ago with no problem, so I don't understand why the updates are failing and why after doing so, now Illustrator shows that it is up to date and Photoshop does not.
Has anyone else had this problem and if so, does anyone know why and what I can do about it?
Thank you.

Hi Richei Creative,
These would be my suggestions:
Create a new user account with administrative rights, log out of your current account and into that one, launch Adobe Application Manager and attempt the Photoshop update again.
Instructions if you need them - http://support.apple.com/kb/PH11468
If this fails, uninstall Photoshop (Applications > Utilities > Adobe Installers) and reinstall Photoshop then from Adobe Application Manager the attempt the Photoshop update again, also from the newly created user account.
Hope these help,
-Dave

Bridge will not now let me use camera raw, though I had been using it every day. It says that "the parent application is not active. Bridge requires that a qualifiying product has been launched at least once to enable this feature." What am I to do?

Bridge will not now let me use camera raw, though I have been using it every day. It ways that "the parent application is not active. Bridge requires that a qualifiying product has been launched at least once to enable this feature." What am I to do?

Usually this points to having some kind of earlier trial version still installed on your system. However without more details you are not likely to find an answer. Try this for a start:
How To Get Help Quickly

I tried updating iphone 6 to 8.1.3 But the phone went dead. I have tried using restore options - both update and erase, but the process stops when it tries to update Iphone firmware.

I tried updating iphone 6 to 8.1.3 But the phone went dead. I have tried using restore options - both update and erase, but the process stops when it tries to update Iphone firmware.

Put your phone in DFU mode,
Hold the Power Button (3 secs)
Continue holding the power button and also hold the home button (15 secs)
Release the power button while continuing to hold the home button (10 secs)
Your device should prompt with the "Connect to iTunes Screen"
Restore.

How to map journal fields and whats is the better process type

/Journal/JournalSuspenseCostCentre     NULL
/Journal/JournalBalancingCentre     Lookup from Organisation ID
/Journal/JournalMultiCompany     u2018Nu2019
/Journal/JournalBatchNumber     NULL
/Journal/JournalNumTransactions     Total number of /Journal/JournalLine transactions
/Journal/JournalBaseDRTotal     Sum of /Journal/JournalLine/JournalLineBaseValue u2013 Debit Values only
/Journal/JournalBaseCRTotal     Sum of /Journal/JournalLine/JournalLineBaseValue u2013 Credit Values only
How to map journal fields and whats is the better process type idoc/proxies?please let me know
Journal Line
Multiple journal lines per header:
Schema Element     Data
/Journal/JournalLine/JournalLineCostCentre     Bank account control Cost Centre
/Journal/JournalLine/JournalLineAccount     Bank account control Account Code
/Journal/JournalLine/JournalLineMoneyTotal     Transaction Line Amount
/Journal/JournalLine/JournalLineVolume     NULL
/Journal/JournalLine/JournalLineDescription     Payee Name
/Journal/JournalLine/JournalLineChequeBookReference     NULL
/Journal/JournalLine/JournalLineMatchField     Cheque Number
NB Contra accounting entries should be posted to:
Schema Element     Data
/Journal/JournalLine/JournalLineCostCentre     Bank account control Cost Centre
/Journal/JournalLine/JournalLineAccount     Bank account control Account Code
/Journal/JournalLine/JournalLineMoneyTotal     Transaction Line Amount * -1
/Journal/JournalLine/JournalLineDescription     Payee Name
/Journal/JournalLine/JournalLineMatchField     Cheque Number
/Journal/JournalPeriod     Current General Ledger Period
/Journal/JournalYear     Current General Ledger Year

It looks you are new to PI,
you have to develop scenario end to end, by creating source data type and target data type(if you have XSD's not required),then use Graphical mapping (message mapping) to map source and target structures.
Search in sdn for one end to end scenario you will understand easily
Regards,
Raj

Acurrate process to clone and transfer all the disk to another tiger computer....

Please guys would be kind enough to show me an easy and acurrate process which incude process to clone AND transfer all the disk from my powerbook G4 (10,4,11) to a macbook (2,1)also tiger computer 10,4,11....
(Carbon copy cloner or easier again you can think of....)
TY

Unfortunately, this can't be done. Although you are using the same OS version (Tiger) the PowerPC version (your G4) is not compatible with the Intel version (your MacBook). There was never a Universal Binary (version compatible with both platforms) for Tiger. Apple only produced separate PPC and Intel versions. If you were to clone your PPC version over to your Mac, it simply wouldn't run at all.
You can use Migration Assistant which will move over all of your files and settings. However, none of the applications you have installed will run as they are all PPC. You would need to see if there are more current versions that are Universal Binaries.
I wouldn't really recommend migrating at all between platforms. I would start with a fresh install of a more current OS on your MacBook and then reinstall your apps one by one. You can manually move over any personal files (pictures, music, office-type documents) by copying them over to a flash drive or by putting your G4 in Target Disk Mode.

I am using iphoto 6.0.6 and after opening the application it drops below the dock. I can see it when I use expose to reveal all open windows but once selected it drops below the dock.

I am using iphoto 6.0.6 and after opening the application it drops below the dock. I can see it when I use expose to reveal all open windows but once selected it drops below the dock.

Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder.
(On 10.7: Hold the option (or alt) key while clicking on the Go menu in Finder to access the User Library)
(Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
What's the plist file?
For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.

Iv downloaded the 0845 wizard from the App Store. Registered my details and it has been working. But for some reason it won't let me log in and keep saying failed every time I try to use it. Iv deleted and re-downloaded the app and it still says the same?

Iv downloaded the 0845 wizard from the App Store. Registered my details and it has been working. But for some reason it won't let me log in and keep saying failed every time I try to use it. Iv deleted and re-downloaded the app and it still says the same?

I would say to start by looking on their web site... unfortunately, that appears to be dead.
Based on the horrible ratings on the App Store (1 star for the current version), I'm not surprised it doesn't work well.

I am extremely upset. I purchased my iPad in SA and I am traveling in Greece. When I want to make use of the free apps, I get a message that the app is not available in the SA store. What is the point of having an iPad if you cannot use it worldwide?

I am extremely upset. I purchased my iPad in SA and now I am in Greece. I cannot download free apps as I get a message that the apps are not available in the SA store and only in US stores. When I change to the US store the same thing happens. What is the point of having an iPad if I cannot use it worldwide??? I feel that I wasted my money purchasing it as I specifically purchased it to use when I travel. How can I get access to all the available apps and why are they restricted.

You can use your iPad worldwide. However, each AppleID is tied to
a specific country's store. To use the AppStore in any country, you
must be in that country and have a credit/debit card issued by a financial
institution in that country with a verified billing address in that country.
It is the developer's choice which AppStores he makes his app available
from, and some countries prohibit certain apps.
To make a purchase from the US store (including downloading a free app
available in the US store), you must be in the US and have card issued
in the US with verified billing address in the US.
You can use your purchases from the SA store worldwide, but you
cannot make purchases in other than the SA store unless you meet
the aforesaid conditions.

What is the point of the download window if you use stacks?

Greetings,
One of the most annoying things about the download window was the fact that the window always hung around after completing dowloads in Tiger when using safari. To me, that was just a time waster of always pressing Apple+W to close that window.
When Leopard was released, I was excited to realize that one function of the download stack was to recevie downloads from safari after completed. However, after completion, the download window still sticks around and I still have to close it... then navigate to my stack of downloads to mount the image. What is the point of the download window is I use stacks now? Why can't the window disappear after completion?
//Cheers

Aaargh!! Me too - it's so annoying! Firefox has a downloads window as well - I just don't see the point of it. I didn't like it in Tiger either.
As a way to see the progress of downloads, it's fine, but it should at least close when all the downloads are finished, and completed downloads should not display.
Ideally it should look & work exactly like the Copy window in Finder - the one that comes up when you are copying or moving a large file or number of files from one folder to another.
Is there a hack that will make it work like that?

Every time I try to upload a video to youtube (or pictures to blog services like tumblr) using Firefox, I cannot upload them unless I use the "basic uploader" function. Why and what can be done?

Every time I try to upload a video to youtube or a pictures to a blog service, such as tumblr, I am unable to do so with the default uploading options (usually something that allows multiple uploads, etc). Instead, I can upload these media using their "basic upload" functions. Why and what can be done?
== URL of affected sites ==
http://www.youtube.com; http://www.tumblr.com

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Trying to save files on "PC" side of Mac, using a FreeAgent external harddrive. I get the error message E:/not accessible or something similar. Can I not use an external harddrive, if not, what is the best way to back up PC side of a Mac

Trying to save files on "PC" side of Mac, using a FreeAgent external harddrive. I get the error message E:/not accessible access denied. Can I not use an external harddrive, if not, what is the best way to back up PC side of a Mac

Apple has really crappy NTFS read-only that does not always work. And it is probably a licensing issue.
Paragon Software is constantly being updated and supported with their NTFS for Mac OS X - they also have an HFS+ driver for Windows that works - Apple's HFS+ read-only driver for Boot Camp / Windows does not.
I keep seeing problems and lack of support for MacFUSE, that could change.
http://www.bing.com/search?q=ntfs+for+mac

HT5287 If DVD Movies, Audio CD's and even burning CD and DVD's are not supported, what is the point of DVD & CD Sharing then? Wouldn't it just be better to remote in or use a thumb drive if it's only able to be used for data transfer?

If DVD Movies, Audio CD's and even burning CD and DVD's are not supported, what is the point of DVD & CD Sharing then? Wouldn't it just be better to remote in or use a thumb drive if it's only able to be used for data transfer?
Or am I missing the bigger picture?

As long as you have a Superdrive or an external burner/drive, burning, watching, installing, etc. from CD or DVD will work just fine. And so will sharing.

I am using Numbers on my iPhone5 and cannot get the app to do a simple (SUM) calculation. It shows the formula correctly in the cell, but all I get for my long list of numbers to add is 0. How can I get this to work?

I am using Numbers on my iPhone5 and cannot get the app to do a simple (SUM) calculation. It shows the formula correctly in the cell, but all I get for my long list of numbers to add is 0. How can I get this to work?

Oaky, at least we got that far. Next step is to determine if all those "numbers" are really numbers. Changing the format to "number" doesn't necessarily change the string to a number. The string has to be in the form of a number. Some may appear to you and me as numbers but will not turn into "numbers" when you change the formatting from Text to Number. Unless you've manually formatted the cells to be right justified, one way to tell if it is text or a number is the justification. Text will be justified to the left, numbers will be justified to the right.
Here are some that will remain as strings:
+123
123 with a space after it.
.123

Using BI Content as prototype and re-create the whole thing as custom obj

Dear SDN fellows,
Currently in my project I encountered the case where 1 BW system is shared by 2 source systems (R/3 and ECC6) and the master data from the 2 source systems are overlapped (eg. same material no from R/3 and ECC6 have different meaning).
One of the suggestions is to use BI Content as prototype and re-create the whole thing as custom objects. For example:
0MATERIAL is created as ZMATERIAL, thus all "0" objects are for ECC6 source system and "Z" objects for R/3.
It will require enormous effort to do, and we try to automate as much as possible in every stage of development (to avoid human error as well) such as:
u2022 Re-create all BI Content InfoObjects programmatically using BAPI functions (BAPI_IOBJ_GETDETAIL, BAPI_IOBJ_CREATE and BAPI_IOBJ_ACTIVATE_MULTIPLE). Does anyone know what function module or ABAP class to get like "Create InfoObject from template in RSA1"?
u2022 Re-create all BI Content Transfer & Update Rules programmatically (copying and automatically changing the InfoObjects from "0" to "Z" in the mapping). We are still researching on class CL_RSAU_UPDR and function module RSAU_UPDR* for this.
Our main worries is when re-creating the transfer & update rules, as most of the SAP complex logics are implemented here using start routines, transformation routines, formulas, rule groups, etc. Using copy-paste & find-replace the routine may not be sufficient, full understanding of the logic might be required, and there are many of them, which makes it even more difficult.
If anyone ever did this approach before, please share how did you go about it? Thanks alot.
regards,
arie

Thanks Akashdeep for your input. Yes we are aware to add 0SOURSYSTEM compounding in all master data InfoObjects to handle multiple source systems.
We would like to get practical advice on how to do the re-creation of all BI Content objects (InfoObjects, Transfer & Update Rules, Queries, etc) in the most efficient way, probably programmatical way, to reduce the huge effort required and avoid human error if we are doing it manually.
Also our main worries with re-creating the transfer & update rules, as most of the SAP complex logics are implemented here using start routines, transformation routines, formulas, rule groups, etc. Using copy-paste & find-replace the routine may not be sufficient, full understanding of the logic might be required, and there are many of them, which makes it even more difficult.

Raw 6.7 RC forces use of process 2010. Why and What is the point?*

Similar Messages

Maybe you are looking for