Raw and D600 Nikon

I have a D600 Nikon but aperture can not read the raw files, when it would be possible ???

We are users here, not Apple or Nikon. We do not know. Camera manufacturers keep the RAW processing algorithms secret, so folks like Apple and Adobe have to sort of reverse engineer to get an approximation of what Nikon is up to.
However the D600 is a very major new camera and odds are it should not be too long.
Good luck! I too may own one before the RAW conversion is available...
In any event I suggest also owning Nikon NX2 which to my eyes/brain invariably does the very best job on converting Nikon NEF files. I normally use Aperture for the workflow but for a really special image I will convert the RAW file using NX2.
HTH
-Allen

Similar Messages

Adobe camera raw and the nikon D80 in photoshop CS version 8

How can I open RAW files from my nikon D80 in photoshop CS version 8 ? At the moment I have to open and edit my RAW files through Nikon View NX and then convert the files to Jpeg, dump them in a folder and then re-open them as Jpegs in photoshop, it's a very frustrating process so I'd really appreciate it if anyone can tell me how I can open them straight into photoshop, I really can't take this cross platform editing !!!! Thanks

This particular forum (sharing and storage) was created to help those transitioning from Photoshop.com to Adobe Revel. I am moving your post to the correct forum so that it can get proper attention. I understand that it is difficult to determine which forum to post in since there are so many.
I'll put I this posting in the photoshop community so the experts there can help you.
We also have many other forums relating to other Adobe products
http://forums.adobe.com/community/
http://forums.adobe.com
Out of curiosity, can you tell me how you found our forum page?

Raw Files from Nikon D600

What can't I open my raw files using Photoshop Elements 10?

To open a raw files from Nikon D600, you need Adobe Camera Raw version 7.2 or above version. See the link below. It states the cameras supported in different version of Adobe Camera raw:
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
But in PSE10, I am afraid, this version is not available:
http://www.adobe.com/support/downloads/product.jsp?product=40&platform=Windows
You can check the ACR version installed from Elements Editor.
If you are on Windows, go to Help> About Plugins > Adobe Camera Raw.
if you are on Mac, go to Photoshop Elements Editor> About Plugins > Adobe Camera raw.
What you can do now?
Download and install the free Adobe DNG converter to convert your files to the Adobe universal Raw format and the files will open in all versions of PSE (keep your original files as backup).
Windows download : http://www.adobe.com/support/downloads/detail.jsp?ftpID=5519
Mac download: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5518
You can convert a whole folder of images in one click. See this quick video tutorial:
You Tube click here for DNG Converter tutorial

How to view and edit raw images from Nikon d610?

Just bought a Nikon D610 and was surprised that the raw images are not supported by Aperture. Thought they would be the same as the D600. Any easy way to fix this?

Any easy way to fix this?
Not really.
You might import raw+jpeg pairs, while you are waiting for the raw support, and set Aperture to use the jpeg as original file. That can be switched back later. Or import only the jpeg, but keep the raw on the card and add them later.
Another possibility - use te software that came with your camera to develope the raw and import tiffs to Aperture, or use Adobe's dng converter to convert the raw to dng and work with the dng files.
Léonie

When I open a raw file (NEF Nikon 7100) and apply setting then click save, I get an error ( could not complete your request because of a program error ). Ideas?

when I open a raw file (NEF Nikon 7100) and apply setting then click save, I get an error ( could not complete your request because of a program error ). Ideas?

Oh, dear.
If you use PSE as your external editor for iphoto, you need to save the images back to iphoto by using Save, not Save As and not changing anything like the name or format that would bring up the Save As window. (You may need to adjust the editor prefs>saving files>on first save to save over existing.)
OR you can export the photos from iphoto to the desktop, use file>open in the editor and then change whatever you want and either import the saved image to the organizer or import it back to iphoto as a new file. What you are doing is extremely risky, particularly to the iphoto library which you may easily damage by your workflow.
I would start the organizer holding down the shift key, then create a new catalog and switch to the new one. Then try opening the editor without opening an image and see if you get any farther.
PSE and iphoto are not designed to be used as you've been doing. You are trying to write to the iphoto library from outside iphoto, which is the fastest known way to corrupt the library and lose all your photos.

I am trying to update my CS 6 so it can read the RAW from my NIKON D7000 and do get error messages allthe time have tried for a few month now and have not been able and not been able to get any support help either and I think i is realy BAD What to do????

Cant open my Raw from my NIKON D7000 in Photoshop and cant down load updates get error messages all the time have tried at least ten times and tried to get help from support but not succeeded.
Very bad I think but what to do????
Ulf

Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
Mylenium

I have Photoshop CS5 and a Nikon D 810 camera. I have downloaded Camera Raw 8.8 & DNG converter. I can neither open the raw files (.nef), nor process them with the DNG converter. What is going wrong?

I have Photoshop CS5 and a Nikon D 810 camera. I have downloaded Camera Raw 8.8 & DNG converter. I can neither open the raw files (.nef), nor process them with the DNG converter. What is going wrong? Thanks!

This is the last paragraph from my very first response to you, post #1 in this thread:
…Additionally, you need to install the DNG Converter, not just "download" it, and you need to launch it and run it on each folder of NEFs you wish to convert to raw DNGs. [emphasis added]

Can i open and edit nikon d810 raw files in lightroom 4.4

can i open and edit nikon d810 raw files in lightroom 4.4

No. Lightroom 4.x will never be able to open Raw files from the D810.
D810 support has only just been added to the RC version of Camera Raw 8.6. It is never retrospectively added into older versions.
Adobe Photoshop Camera Raw 8.6 RC for CC and CC 2014 Release Candidate | digital camera raw file support - Adobe Labs
Adobe will probably add D810 support to the next version of Lightroom.
Either way you'll have to upgrade to Lightroom 5 to be able to open D810 Raw files in Lightroom.

I have Lightroom 4.4 and a Nikon d800 with firmware upgrade 2.005. raw files are now since upgrade, unreadable. any plugins or advice? Thanks

I have Lightroom 4.4 and a Nikon d800 with firmware upgrade 2.005. raw files are now since upgrade, unreadable. any plugins or advice? Thanks

I select the images I want uploaded, NEF files, click the "IMPORT" button, process bar comes up and shows work in progress, but no progress. after about 2 minutes, dialogue box appears with message: "unable to import because the following files are unreadable: NEFxxxx, etc."

Which version of camera raw will work with elements 9 and a Nikon D5100? How do I download photos to it?

I have Photoshop Elements 9 and use a Nikon D5100. I have downloaded camera raw 6.5 but cannot download photos to it. Does camera raw start automatically or do I have to manual start it?

That did I, thanks.
99jon <[email protected]> wrote:
99jon created the discussion
"Which version of camera raw will work with elements 9 and a Nikon D5100? How do I download photos to it?"
To view the discussion, visit: https://forums.adobe.com/message/7178756#7178756
>

Camera RAW and Nikon D800/CS6

I upgraded to Photoshop CS6 from CS5.X and I can not open RAW files in Camera RAW for my Nikon D800. It functioned properly in CS5 with the latest RAW release but won't work in CS6.

You need Camera Raw 7.1...
http://labs.adobe.com/downloads/cameraraw7-1.html
-Noel

Hi to all, I use Windows 7, 64Bit and Lightroom 5.7, Camera Raw 8.7, when I develop or export files (mostly Raw Fils from Nikon D810) after 10 to 20 pictures my computer shuts down or I get a bluescreen. Please tell me why.

Hi to all, I use Windows 7, 64Bit and Lightroom 5.7, Camera Raw 8.7, when I develop or export files (mostly Raw Fils from Nikon D810) after 10 to 20 pictures my computer shuts down or I get a bluescreen. Please tell me why.

Blue screen/Computer shuts down is almost always a hardware malfunction or a driver problem.
Make sure your video driver is up to date.
If it is, then the next suspect, in my mind, is overheating, make sure all of the fans in your CPU case are working properly.

Photoshop CS3/Camera Raw and Nikon D5100

Hi,
I have Photoshop CS3 and a Nikon D5100 and I am unable to open my RAW files.
Any ideas?

http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
The D5100 has been supported since Adobe Camera Raw (ACR) 6.4 which is only compatible with CS5 and later. CS3 is too old.
Either
Join the Cloud, or
Join the Photoshop Photography Program, or
Buy Lightroom 5, open the Raw files, save to TIFF then edit the TIFFs in CS3, or
Keep CS3. Download the free Adobe DNG converter and convert all your D5100 Raw files to DNGs. Then edit the DNGs in CS3.
http://www.adobe.com/products/photoshop/extend.displayTab2.html

Adobe Capture Raw and Nikon Capture NX

I've just bought a Nikon D80 (lucky me but now broke) and have been playing around with RAW files. I can see great advantages in shooting in this format.
I have PSE 4 on a Mac and it seems to me, from looking at tutorials on the web, that all the features of the RAW plug-in are not available in PSE. I know about the lack of support for Sidecar files but there isn't any colour space support either so far as I can see and there are fewer tabs in the window. Is this correct or am I missing something? I'm not overly bothered but it would be good to know.
Nikon offer a free trial of their Capture NX application. I'm reluctant to try this given the plug-in clashes which arose from installing Nikon's rather poor Picture Project FROM the CD which came with the camera (I've now deleted it). Would Capture NX offer me anything significant beyond what I can do with ACR?

On some photography forums I read that after you manipulate a NEF (RAW) file using Nikon Capture NX the file is no longer recognizable by Adobe RAW.
I also have a new Nikon D80 and like some of the features of Capture NX but usually use Adobe Photoshop Elements (4.0 & 5.0) to organize and do simple edits. Therefore, my current plan is to only use Capture NX to work on key NEF photos and then save as JPEG for PSE 5.0 to handle.
Too bad there wasn't one standard for NEF file edits.

Why does my Photoshop Cs6 not let me view my Nikon D7100 photos in Camera Raw and photoshop when it does my Nikon D700?

Why does my Photoshop CS6 not allow me to download my Nikon D7100 photos into camera raw and photoshop when it does my NIkon d700?

Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
D700 first supported in Adobe Camera Raw (ACR) 5.1 (CS6 ships with ACR 7.0)
D7100 first supported in ACR 7.4
You probably just need to update Camera Raw in CS6 via Help > Updates.
Confirm which ACR version you have installed via Help (Win) or Photoshop (Mac) > About Plug-In > Camera Raw.

Raw and D600 Nikon

Similar Messages

Maybe you are looking for