RAW changes in 10.4.8

Looks like the changes to RAW support in 10.4.8 are less than some had hoped for, but every little bit helps. Here's the list of related changes:
• Adds RAW image decoding support for these cameras: Sony DSLR-A100, Nikon D2Xs, Fuji FinePix S2 Pro, Fuji FinePix S3 Pro (+Highlights) and Konica Minolta 7.
• Resolves an issue in which thumbnails may appear blank when importing RAW images from a Canon 30D camera.

Thank you Neomancer for your contribution.
I edited the Raw.plist with Property List Editor.
/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/I mageIO.framework/Versions/A/Resources/Raw.plist
Just added an entry with Minolta-DiMAGE 7i sibling the MINOLTA-MAXXUM 7D settings.
  Mac OS X (10.4.8)  

Similar Messages

  • Camera raw changes color in adobe bridge and photoshop

    Hi all, I am quite new to use RAW. I have raw files that I want to edit. Unfortunately, the moment I click on the raw files, the color changes.
    Is there anything I should do to the color setting?
    I am using a canon 20d and Adobe Photoshop, Bridge CS 3 and Adobe Camere Raw 4.0

    The image is indeed rife with red color.
    The fact that the embedded JPEG isn't quite as oversaturated with red as Adobe's conversion with the lowest color temperature of 2000 just says that Canon's conversions have more range at the low-end of the color temperature setting.
    This is the color from the embedded JPEG.  Clearly it's dominated by a reddish-orange color, though not as red as that from Adobe's software.
    This is the color from Adobe Camera Raw's conversion at the (low-end minimum) color temperature of 2000:
    This is the photo converted with Canon DPP using "click white balance" on the bridge beam on the left:
    Note, however, that (though the dropper seems to have incredible range) DPP does not allow you to specifically SET a color temperature lower than 2500K, which yields this color:
    The bottom line here is that the "Click White Balance" function in Canon's DPP has far more range than ACR, where even the white balance dropper "mins out" at 2000K.
    That's something the Adobe folks may want to look into, to extend the range of ACR's capabilities to suit this kind of IR photography.
    -Noel

  • RAW changed to TIFF in upgrade to iPhoto '08

    When we upgraded from iPhoto 4 to iPhoto ’08, we allowed the newly installed program to convert our old iPhoto library into the new format. Everything seems to be OK except for RAW images from a Nikon D80 with file extension .NEF. All of the .NEF images which were in iPhoto before iPhoto converted them are now identified in the iPhoto information box as "kind TIFF Image". They do not display as sharp images in iPhoto.
    For the record, images uploaded from the same camera after upgrading iPhoto appear as sharp photos and are correctly identified as “kind Nikon Raw”. We knew that iPhoto 4 could not work with RAW photos, but it allowed us to upload them and see and label their chunky images, and we believed that they would be preserved when we upgraded the program. This was one reason we chose to upgrade. Unfortunately, we didn't realize the scope of this problem until after we had deleted our backup of the iPhoto 4 photo library.
    If we export one of these misidentified images, then change the file extension of the exported image to .NEF from .TIF, and then import it into iPhoto again, the problem is corrected, but the description we have entered for the photo is lost. (Keywords would also be lost, but we hadn’t used them.)
    Why did this happen? Could we have prevented it? Is there a way to correct the identification of these images and preserve the descriptions we have entered for them? Is there a way to correct all of our approximately 1000 RAW images all at once or to automate the file extension changes?

    Welcome to the Apple Discussions. Other users have reported similar problems, mostly with Canon raw files. Do a search in the iPhoto forum for "raw to tiff" and you'll get a list of the threads where it is discussed. There may be an solution or explanation in there.
    Metadata can only be written to jpg or tiff files by iPhoto. So exporting the raw files to the desktop cannot include the metadata you added. Keywords and comments added to a Nikon NEF file by other applications, iView MediaPro, do not get imported into iPhoto. iPhoto creates a jpg version of the file for display and editing and the metadata does not get transferred to it.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • Camera Raw changes dimensions of file from 3:4 to 2:3!

    Hi,
    I take photos in raw and jpeg. My raw files have the dimensions 3:4 and jpeg have 2:3. However when I use camera raw, the dimension of the raw file is changed to2:3 which causes me to loose part of the picture. If I save the raw file to tif and open in elements I get 3:4 but then I can not edit in Camera raw!
    Has anyone got the same issue? I have a canon powershot g12 and photoshop elements 11.
    Lisa

      I’ve not come across this but if you are shooting Raw+jpeg try an experiment by switching to RAW only. See if that makes a difference.
    Raw files contain an embedded jpeg in order that they may be viewed on the camera LCD screen and if you are using a different aspect ratio for the jpegs; this may be causing some conflict in the RAW header.

  • Camera Raw changes resolution to lower value (CS4, CS5)

    When I open a tiff file that is 300 dpi in Camera Raw, process it some, then open it in Photoshop and save it, the resolution has changed from 300 to 240. Anyone know why this is and how to prevent it?

    Because you've got the Workflow Options set to 240 PPI. See that info link at the bottom of the Camera Raw dlog? Click that and you can change the settings...

  • Adobe Camera Raw changes not reflecting in Premiere Pro

    I was super excited to try out the new CNDG support in Premiere Pro CC 2014, but I have to be honest - I am a bit disappointed...
    I am using 16bit Cinema DNG files and the source settings sliders really aren't doing it for me (notice the pink highlights)
    That's alright though, I would much rather use Adobe Camera Raw!
    Right click > Edit Original
    There we go, that looks nice - no pink highlights, nicely recovered details in the shadows and highlights. 
    PERFECT, click DONE!
    Nothing...For whatever reason, changes are not reflecting.
    Adobe - please allow us to use Adobe Camera Raw, there are so many folks out there that want to incorporate it into their workflow.  I have tried SpeedGrade and various other color correcting tools and I have found Adobe Camera Raw to work the best IMHO
    Thank you for your time.
    -Loyal Paying Customer

    Hi Ekombokom,
    ekombokom wrote:
    Hello! I too am having this same problem. I used Camera Raw (both in Bridge and Photoshop to make sure) to adjust and correct the Cinema DNG files I shot with my BMPCC; however, the video sequence in Premiere does not reflect any of the changes made. Why would Adobe not support Camera Raw settings in Premiere?
    Sorry, but Premiere Pro does not have a camera raw importer. You adjust the settings in the Source Settings dialog box instead (for RED, ARRI Raw, BMCC and BM Pocket Camera DNG files). You do have access to some controls for these formats, but in some cases, Camera Raw has more controls.
    ekombokom wrote:
    Camera Raw is an amazing tool for refining an image and gives me the best results compared to SG and Davinci. I was so excited to be able to use it once Premiere supported CinemaDNGs but now I'm confused as to why it's not supported.
    Cinema DNG from the Blackmagic Cameras are supported, you just adjust settings in Source Settings, as I mentioned. Have you tried that? The reasoning behind this is that Cinema DNG video coming from camera raw is too difficult to playback and edit with.
    That said, some users bring Cinema DNG footage to After Effects, adjust the video there, then render out files that are suitable to edit with.
    ekombokom wrote:
    I thought the point of using Adobe was that all their products worked together seamlessly? I really hope they fix this.
    You can always make a request here: http://adobe.ly/feature_request, however, I don't see a camera raw importer going into Premiere Pro any time soon (if ever) because of the reasons I previously mentioned (editing with camera raw would be too cumbersome). I think the more realistic feature request would be to add more controls in Source Settings.
    Thanks,
    Kevin

  • Camera RAW changes not staying in Bridge/Photoshop

    Hi all,
    I've started having trouble with changes in Camera RAW not sticking once they're closed. I've got the XMP files, and Bridge shows the little icon to show it's been changed, but the changes aren't staying. I've tried clearing the cache, restarting the program and rebooting to no avail. To answer the preferred questions:
    Photoshop CC, 14.2.1 64x
    Totally updated
    Windows 8.1 Pro
    Nikon d800 RAW (NEF) files
    No error messages
    Making adjustments in Camera RAW (Photoshop) and then clicking 'done' when complete. This has always in the past saved the changes made until I make more, reset them, or delete the XMP file.
    Always worked previously
    Chrome, anti-virus. Never been an issue previously. Bridge usually runs at the same time.
    Using a Microsoft Surface Pro, 4GB RAM, over 50GB free on the drive. No changes made to the system, since I let it run as-is. No updates to hardware, no brushes, no plugins.
    Anyone have any ideas?
    Thanks in advance!

    Thanks for the reply, Trevor! I've been on this internets for a long while now, and the first thing i notice in forums are that people never seem to follow the posting guidelines and never seem to provide info that's needed to help them (see: many photog forums where people ask for lens/camera recs and never tell us budget, needs, current equipment, or what they actually WANT to photograph!), so I find it's expedient to actually provide necessary information! Gettng gold stars for well-thought out, thorough explanations: what a novel concept!
    Incidentally, I think I just worked it out. I added my external drive to my desktop PC to see if there was a difference, then noticed the same issue occurring. I had a sudden thought that the preview thumbnail wasn't showing up, and realised that the option to choose preview settings ('generate 100% previews' or 'prefer embedded') will make the edits disappear if you also have the cache purged.
    Cheers anyway!

  • How to Save Camera Raw Changes?

    Hi all,
    First time poster here so please forgive my likely ignorance of Bridge's brilliant features.  I have just started to use Bridge as my primary tool in my post-processing workflow.  As I started going through a job I completed recently I started to open some under-exposed JPG in Camera Raw (I find it faster to adjust basic things like exposure than Photoshop).   Anyway, once I had made my desired changes I then clicked Done which returned me to Bridge and the thumbnail showed the changes I had just made.
    My problem is this.  Owing to the fact that Bridge does not contain a Histogram I am using another piece of software to quickly view the histogram. Anyway after making a few changes without switching programs I then switched back to discover that the half a dozen or so Camera Raw adjustments were not visible in the alternative program, owing to the use of sidecar xmp files to store the Camera Raw mods.
    So my question is this.  Say I have 10 images that have all had modifications made to them in Camera Raw (but I haven't opened the image and saved it), how can I bulk export those changes to new JPG images without having to go into each image one by one?  It's gotta be there somewhere, I just can't find it.
    Can anyone help, please?
    Cheers
    Josh

    the .xmp files are only generated if the file you are working on doesn't support metadata but JPG files support it so the information is written inside them. If you want to "flatten" the file so that the pixel information gets changed then you will have to resave the files which isn't something that you should do very often with JPG files (preferably only once).
    To mass save files you can either select them and go to Tools->Photoshop->Image Processor (but this will launch Photoshop) or open them up in Camera Raw, select all of them in the film strip and select Save Images

  • Why does camera raw change my image?

    I have had this issue a while now and can't figure out how to change this. When I upload my images from the camera they are exactly how I wnat them in Bridge. Then when I zoom in on the image or open in ACR the image seems blown out and orange or has magenta tones in it. Because the image changes so much Iend up spending lots of time fixing in ACR rather than inhancing in ACR. Can someone please help me. I am using PS CS4, Windows7 and I shoot in RAW.

    First, I only have CS5 so I may have given some preferences to look at that you don’t have or are available via a different set of clicks in CS4; however, from your responses, the situation seems relatively clear: the image in Bridge is the camera-rendered JPG thumbnail/preview while the image in ACR is the Adobe-rendering and is all you’ll ever be able to produce.
    There are two issues:
    1)      Bridge is not showing you the Adobe Rendering for some reason.  Perhaps Bridge CS4 still has a setting of whether to show high-quality thumbnails/previews or not and if you set this, then you’ll see the Adobe-rendering in Bridge as well.
    2)      You expect the Adobe-rendering to be the same as the camera-rendering, which it can never be.  This is the main issue, although if item 1 was working, you wouldn't be distracted by the in-camera rendering.
    How to produce the camera-rendering is known only to the manufacturer of the camera and anyone who has licensed their technology.  Adobe is a separate corporate entity with no access to the camera-manufacturer’s intellectual property governing how they produce their JPGs,  so Adobe has no way to produce the camera-rendering, nor do they want to.  Adobe wants to produce similar output from different cameras.  Presumably you are using the Adobe Standard camera profile.  If your camera is a Canon or Nikon or one of a few others, then besides Adobe’s standard camera-profile there are others that you can choose from where Adobe has attempted to approximate the in-camera rendering via a profile, although this may or may not be that close, it will be closer than using Adobe Standard as your profile.  You can find the camera profiles in ACR using the tab that looks like a black camera, 3rd from the right.  If you find a different camera profile more to your liking, then you can set that as your ACR default so newly processed images will have that new profile.  Besides chaning the profile, you can also dial back the saturation or vibrance and save that as your new ACR defaults.
    I should warn you that the images in your screen-shot from Bridge have a slight greenish tinge and is quite pale-looking to my eyes, and the ACR view looks more natural.  It may be that your monitor, being uncalibrated, is distorting the colors and so your processing produces colors that everyone else will see as odd if they are viewed on different computers.  If you only ever use your processing to create prints and those prints look ok,  then perhaps this is not a problem, but if you produce web galleries for outsiders to view on their own computers, then it could be a problem.  It also could be that you and I are seeing the same thing and just differ in our preference for natural skintones.  If I had to guess, I'd say the screen-capture you have opened in Photoshop was done with an sRGB profile assigned as your monitor profile, but your color-settings in Photoshop assigned an Adobe RGB profile without doing the profile conversion and so the screen-capture as displayed in Photoshop does not actually look like the original screen in Bridge.

  • Camera Raw changes not saving

    Changes done in Camera Raw are not saving to be usable in PS or other programs.
    I am using CS6 with windows 7.
    I accidentally took a heap of photos in jpeg. I edited them in Camera Raw - then save the changes in jpeg format but still no changes showing in PS. I have tried Save As, Done, Open image but the changes are not appearing in my PS

    Penny,
    The button at bottom, "Open Image", doesn't mean "open an image in Camera Raw". It means "open the currently displayed image in a new document in Photoshop".
    "Open Image" will pass the adjusted image that you are viewing, not the file itself, to Photoshop where a new document will open and contain the image. The current Camera Raw adjustments for the file it has open will simultaneously be saved and Camera Raw will close.
    Hold down Shift key to see the button change to "Open Object" which will result in a new Photoshop document being opened containing a Smart Object which encloses an independant duplicate of the file and adjustments which you are currently viewing in Camera Raw. The current Camera Raw adjustments for the file it has open will simultaneously be saved and Camera Raw will close.
    Hold down Option/Alt key to see the button change to "Open Copy" which is like "Open Image" except the adjustments which you are currently making in Camera Raw will only affect the image that is sent to Photoshop and adjustments will not be saved.

  • Adobe Camera Raw: changing mode default from 8bit to 16bit

    I'm using ACR 5.7 with Ps CS4 Mac. When I call up a DNG image, ACR always comes up in 8bit mode, and I have to manually change it to 16bit before converting. I used to have CS2 and ACR 3.x. It always came up in 16-bit. Whay can't ACR 5.7?

    Not for nothing, but normally, the Camera Raw Worlflow Options should be sticky...meaning, whatever option you set should be picked up the next time you launch ACR. If this doesn't happen, it would be useful to know what OS you are working with (just Mac doesnt tell us much).
    You need to help us help you resolve the issue...

  • LR1 undoes CS2 and CS3 Raw Changes

    I imported a full wedding of already adjusted CR2 files into LR1. On random images it undoes my RAW adjustments (from CS2 and CS3) and sets them back to default. It still does show the little icon that says something was changed but when opened the settings are default...

    thanks John Joslin
    CS4 is faster than CS3 on a computer which supports it.
    which are the computer that supports it ? i run xp
    why did the uninstaller do a mess up ?
    thanks

  • RAW changes...

    I haven't my camera with me at present so cannot test these ideas.
    If the incamera settings are set to certain values, say sharpening Max, Tone B&W then when the RAW is imput direct from camera into Aperture I would assume the RAW image that is viewed will have MAX camera sharpening and be B&W.
    Why then if I alter the settings in another RAW converter, say Nikon Capture or NX with its powerful upoint function, the input will default back to the camera capture?
    The reason behind this post is that the key to RAW is the ability to change certain camera controlled aspects after the image has been initially created, and if one viewer cannot see what another has done then really it means a RAW - TIFF/JPEG into Aperture which then defeats alot of what aperture is about. Any thought or workflow ideas?

    If you are shooting in RAW then those settings do NOT have any effect on the RAW file itself - they are just instructions to the RAW conversion software. And the instructions are proprietary to each manufacturer - they only work in the manufacturer's software.
    Basically there are no examples of conversion software that is capable of reading the conversion settings from another app, apart from Lightroom and ACR which come from the same company and are based on the same engine.
    Ian

  • Removing Camera Raw changes to jpeg

    Just upgraded to CS3. I mostly shoot jpegs, but do like being able to edit images in camera raw. My question is: If I make some changes to a jpeg image in camera raw and decide that I want to restore the image to it's original state, what do I do? I know the changes are not saved with the image, but I just want it to be just like the original so I can start from scratch editing in Photoshop.
    Thanks

    "Clear Imported Settings" sets all "invisible" controls to their default values. "Invisible" control are controls that the engine supports, but don't have a UI. For example, many of the new Lightroom controls when running in Camera Raw 3.7. If these controls are set using Lightroom, Camera Raw 3.7 will obey them. This command allows the user to remove them if they need to.

  • Can I transfer a Raw Photo to PSE 9 with a direct link and keep changes

    I have limited expertise in all of this stuff so please understand.
    I recently upgraded to PSE 9 because I bought the Nikon D7000.
    Unfortunately I have had nothing but nightmares with the upgrade.
    PSE has eliminated BRIDGE and I can no longer open a RAW file in PSE 9 from the camera.
    They have something called Organizer but the Adobe Forum is full of issues about it.
    I have found it useless and it may stem from both having a MAC and the D7000.
    *Here is my question :*
    I can use Nikon Transfer to Nikon View NX2 to open the RAW files.
    However if I make any changes in View they do not carry over to PSE and ACR (Adobe Camera RAW)
    AND
    I cannot find a way to have a direct link from View NX2 to PSE 9 and ACR.
    I have to drag and drop onto the desktop and then drag and drop into PSE / ACR.
    *If I purchase Aperture ($80.00) can I make changes in Aperture and then have a direct link to PSE 9 if I need to make changes or adjustments in PSE and keep the RAW changes from Aperture ?*
    I hope I made my dilemma clear.
    Thanks,
    Greg

    Your question pivots about several issues, each of which will bear on what you end up doing.
    Briefly, what you'll find is that Aperture does its own RAW conversion (and does it well). You can follow that with either of the following:
    - use PSE9 as an external editor, in which case Aperture creates a copy of the converted RAW file in either TIFF or PSD format (you choose), sends it to PSE9, and receives the changed file back. At this point you have two images in Aperture: your converted image (with Aperture adjustments, if added) and your externally-edited image. Note that your original RAW file is never changed, and remains available.
    - using Aperture, export a copy of your RAW original, and then open it in any program you want. In this case, that program will need to be (or include) a RAW converter. And Aperture will not track the file in any way at all once it is exported.
    ... can I make changes in Aperture and then have a direct link to PSE 9 if I need to make changes or adjustments in PSE and ...
    So that's "Yes" to the first part and ...
    ... and keep the RAW changes from Aperture ?
    ... I'm not sure what you mean to specify in this part.

Maybe you are looking for