RAW-Converter für Olympus OM-D?

Photoshop elements 8 - unter Mac mit der Bridge von CS4 - erkennt nicht mehr die RAW-Daten meiner neuen Olympus OM-D. Den RAW-Converter von Olympus selbst finde ich etwas sperrig, und den Umweg über den Adobe dng-Converter ebenfalls. Deshalb habe ich mir als Testversion jetzt Photoshop Elements 11 heruntergeladen - und stelle fest, dass nicht nur die Bridge fehlt, sondern auch dass die Funktionen des RAW Converters stark eingeschränkt sind! Es gibt überhaupt nur noch drei Reiter mit den Standardfunktionen; ich kann z.B. nicht mehr in die einzelnen Farbkanäle eingreifen, und die Möglichkeit, Verläufe zu ziehen oder einzelne Bereiche aufzuhellen bzw. abzudunkeln fehlt auch. Fehlen all diese Features grundsätzlich bei Photoshop elements 11, oder liegt es an der Kamera, dass nur ein Teil der Software funktioniert? Gibt es Alternativen, also kann ich das Beste aus beiden Versionen - 8 und 11 - zusammenführen

Only Apple will know when updates will be released. If you want an educated guess, look at the support page for updates and downloads.
Apple - Support - Downloads http://support.apple.com/downloads/#digital%20raw%20compatibility%205.05
Recently, there have been new raw support releases for new cameras every one or two months.

Similar Messages

Does Photoshop Touch have a built in raw converter for Canon, Panasonic and Olympus raw cameras?

Does Photoshop Touch have a built in raw converter that you can use with your Canon, Panasonic and Olympus raw shooting cameras ?

Thank you for getting back to me on this. Hopefully, raw conversion will be available soon and this fact will be publicized so people won't miss the opportunity.
Walter

Hi there, I need to be able to read raw files from an Olympus Stylus 1 via CS5 and Lightroom 4. I have downloaded Raw file plug-in v 6.7.1 but still can't read the files.

Hi there, I need to be able to read raw files from an Olympus Stylus 1 via CS5 and Lightroom 4. I have downloaded Raw file plug-in v 6.7.1 but still can't read the files?

Read this table http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
The Olympus Stylus 1 was first supported in Camera Raw 8.3 which is only compatible with CS6 and CC.
It is not compatible with CS5 or older and never will be.
If you do not want to upgrade to CS6 or CC then you can dwonload the free Adobe DNG converter, convert all Stylus 1 Raw files to DNGs then edit the DNGs in CS5.
Camera raw, DNG | Adobe Photoshop CC

Has Lightroom been updated with a good RAW Converter that will work with Fujifilm X-T1 RAW files?

Hello,
I just purchased a Fujifilm X-T1. The camera produces excellent jpeg files. However, I prefer processing my work in RAW. Unfortunately, I'm having trouble deciding to upgrade with Adobe if their RAW converter is not up to par with Fuji.
Fujifilm renders images on their sensors differently than conventional Bayer sensors like Canon, Nikon, Olympus etc. Fuji uses an X-tran sensor with pixels arranged in a different pattern.
This has presents a new challenge because now one has to buy a third party in order to process Fuji RAW files and this disrupts the workflow between Lightroom and Photoshop.
I really love using Adobe and hope they will come up with a fix for this.

Participate in this long thread in the official Adobe feedback forum: Camera Raw/Lightroom: Fuji X-Trans Support?

RAW converter dpi

Our Olympus E-500 writes images in RAW files (.orf) at 314 dpi. The Olympus software opens the .orf files at 314 dpi but Photoshop Elements RAW converter opens the files at 240 dpi.
How do we open the RAW .orf files at it's native 314 dpi??
We have the current version of the RAW converter.
PSE 5.02
Win XP
thank you

There is no "native" resolution. The pixel count is what matters. The DPI setting just tells the software how to print it and is, otherwise, and arbitrary number.
I'm not sure that you can set this number in Camera Raw when hosted by Photoshop Elements. The interface is slightly different and I only see 8/16-bit depth as an option. 240 dpi might be the default (and only) option in Elements.
However,you can change it at any time in Photoshop by going to Image>resize>Image Size and unchecking the "resample image" box and typing in a new number.
John

Before purchasing Elements 12, I would like to know if it will process RAW images from an Olympus OMD-EM1. Can someone advise? or tell me how to find out?

Before purchasing Elements 12 I need to know whether it will process RAW images from an Olympus OMD-EM1. Can someone advise or tell me how I can find out?

Hi,
This document defines the supported cameras
Camera Raw plug-in | Supported cameras
According to that, the OM-D E-M1 is supported by Camera Raw 8.3 which is compatible with Photoshop Elements 12. You should try the trial download first to make sure you are happy with it.
Once you have downloaded and installed the trial version you will need to go to the help menu and select Updates..
If you decide to buy it, you can convert the trial version to the full version by supplying the new serial number.
I would avoid the Mac App version and don't get the upgrade version unless you have an older version.
Good luck
Brian

I've just installed CS6 creative suite mainly for photoshop CS6. It comes with camera raw 7.0.something, but need something newer to use my canon 6d. When I download camera raw 8.5 and install the raw converter doesnt work anymore, wont even open or isnt

I've just installed CS6 creative suite mainly for photoshop CS6. It comes with camera raw 7.0.something, but need something newer to use my canon 6d. When I download camera raw 8.5 and install the raw converter doesnt work anymore, wont even open or isnt available anymore in the plugin list. Tried to reinstall everything for a few times, but nothing helps.

When I search for updates the raw converter doesnt get update automaticly. Frustrating, is costing me the whole morning.

Raw converter stopped working and is missing -- running CC and Windows Vista SP 2.

I have reinstalled Photoshop twice from the cloud. RAW converter still missing. Please help.
If I try to install the 7.1 Converter download, I get a failed message saying this update is not for me. The 8.3 DNG converter installed, but the problem persists.

ACR 8.3 is what you want, that is the current version for Photoshop CC. You can check the installed ACR version in Help > About Plug-In > Camera Raw (or open the CC desktop app and see if it reports Photoshop as up to date).
You don't have any need for the DNG converter, since you have Photoshop CC and thus the very latest ACR version with all the newest camera support.
(The DNG converter is a standalone application, completely independent from Photoshop. It converts native camera files to the universal DNG format, so that they can be read by older ACR versions that don't have direct native support for that camera).
If ACR 8.3 is indeed installed, but not working as it should, or even missing, that's a different problem.

Disappointed in the quality of the 1.1 raw converter at high isos

I've been using Lightroom since the first Windows beta, and the very first thing that jumped out at me was the wonderful way it handled digital noise at high isos. It seemed to convert it to a unique kind of grain -- I thought of it as digital grain.
I started shooting at ISO 1600 intentionally just to get that look. ISO 1600, jam the color noise reduction up to 100 percent, and leave the luminance slider at 0. Ah, heaven!
I upgraded to 1.1, and since I've been doing some high-key work at lower isos recently, I didn't notice a change. Then, a few weeks ago I was editing some old stuff, and I zoomed in, and thought "That's odd. It looks like there is some luminance smoothing going on." I checked the luminance slider, and it was still at 0.
I was absolutely positive I found a bug, so I googled, and that lead me here, where I read numerous threads on the subject. OK, I get it, the new de-mosiacing algorithms can reduce the level of noise for a certain level of perceived detail. I've checked it out, and in some of my images I can see what that means. I'd have to say I like the new look in 3 out of the 250 or so ISO 1600 images I've looked at so far. I tried just living with it -- maybe I was being too afraid of change, and maybe I would get used to it over time. Sadly, that wasn't the case.
The fact is, even if the overall level of noise has gone down since v. 1.0, the
type of noise changed, and it's something that I can clearly see in my larger prints. Do I see it in my smaller prints? Not really. But every time I zoom in to 100 percent on an image, I grate my teeth, and become just a little bit more resentful.
For me the whole point of Lightroom is that I'm able to process my images, come back in six months, and have them be exactly the same as they were before. If my older images start shifting around and changing themselves behind my back every time I upgrade, what's the point?
I butt my head against this every time I process stuff at high isos, and I get extremely frustrated when working with some of the 1.5k+ shots I intentionally shot at 1600 just to get the wonderful luminance noise look.
So I'm going to plead with the development team here:
please give me my old noise profile back! Don't make me downgrade my entire library to 1.0 and live with version 1.0 on Windows forever. Give me some hope!

I knew about this issue with the version 1.1 but, sincerely, I was quite happy with the new improved sharpen and noise reduction tools, and also with the clarity tools and all the improvements... until now.
I just have printed a more or less big print (20x25cm), I looked at the print and... "what's that?". My print seems a paint. It just seems this kind of pics you get after applying some "oil paint" filter in your favorite image editing software. HORRIBLE. I don't know if the print interpolation (I just added some resolution in the print module) also accentuated this effect.
Definitively I don't like this "look". It's too different from any other raw converter. It doesn't seems a photograph, digital or not. Version 1.0 had some issues, maybe it was too noisy and the sharpening wasn't good but you could use your favorite noise reduction sw or your editing sw and improve noise/sharpen. What can I do with this "paint"?.

I can't open Sony NEX-5 raw files with PS-CS6 and latest raw converter plug-in 7.1.

When I try to open raw files from Sony NEX-5 instead of going to PhotoShop like all my NEF files, they go to another software suite that I have (On-One). I am running MAC OS 10.7.5 with latest PS-CS6 and latest raw converter plug-in 7.1. On-One seems to hi-jack these Sony raw files and won't give me the opportunity for the adjustments that I get with the Adobe Raw File converter. Any help??

Great news!
Since you have the solution, you might want to see this article: http://forums.adobe.com/thread/1058744?tstart=0
Marking your thread as Answered will be helpful to many.
Good luck,
Hunt

I use photoshop elements version 11 and just bought a nikon d750. Photoshop elements can't open/read the raw/NEF-file. Does a photoshop elements raw converter exist for Nikon d750 ??? And where can I get it ?

I use photoshop elements version 11. I just bought a nikon d750. Photoshop elements can't read/open the raw/NEF-file.
Does a raw converter exist for this camera and where can I find it ?
Thanks for any help.
erwing97792269

You need Adobe camera raw version 8.7. Unfortunately your software pre-dates the camera. ACR 8.7 is only compatible with PSE13. But it is possible to download and install the free DNG converter to convert your raw files to the Adobe universal Raw format and the files will open in all versions of PSE (keep your originals as backups and for use in the camera manufactures software)
Windows download (.exe file) click here DNG Converter 8.7
Mac download (.dmg file) click here DNG Converter 8.7
You can convert a whole folder of raw images in one click. See this quick video tutorial:
You Tube click here for DNG Converter tutorial

RAW converter, PSE 9 and Windows 8

I've just upgraded from Windows 7 to 8 and now find that when I try and open Canon CR2 files in the PSE 9 RAW converter, I get a message saying PSE can't open the file because it is "the wrong type of file". TIF and Jpeg files open without any problem, so it seems to be just the RAW converter that is the problem.
Also, when I download pictures from my camera into the Organiser, I am no longer given the option to select only certain images to be downloaded and given a particular folder. The only route that seems to be available is to download everything on the camera card.
Anybody got any ideas how to solve these two problems? All suggestions gratefully received.
Julian

Launch Full Edit and go to the menu:
Help >> About Plug-in >> Camera Raw
Check the installed version.
The last update for PSE9 was version 6.5
Have you changed your Canon model?

Photo 6 RAW photos don't all open in PSE 6 RAW converter

I have iphoto 6 and PSE 6 installed on an Intel iMac OS X 10.4.11 with: 2GB RAM, 250GB HD and over half of that free.
Recently have begun shooting RAW. From iPhoto I have been editing everything in PSE6 without a problem. To open the RAW photos in the "RAW Converter" I have gone to iPhoto preferences, clicked on Advanced tab, and checked the box "Use RAW file with external editor".
My problem is this: Most of the RAW(NEF) photos in iphoto will open in the RAW converter as they are designed to do when I double click on the thumb nails in iPhoto. However, about 25% of them will not go to the converter. They go, instead, to the regular PSE6 editing window as a JPEG, and nothing I can do will get that photo into the RAW converter. And these are photos from the same series just uploaded to iPhoto6. It makes no sense to me.
What am I missing and what can I do to correct this problem. I would appreciate any help anyone can give. Thanks.
David

TD
I'm feeling just a little sheepish right now.
It was your statement that it was either a) I'm imagining it or b) it's a very rare problem. I knew it wasn't (a) and I suspected (b) was probably not it either because too often when something is very rare, there is something simple hidden in the problem.
So I did some serious reviewing of the problem. I tried to think of anything I had done to those 3 photos that kept them from opening in RAW converter, when all others did fine. It suddenly occurred to me that I had cropped those three, and would have done it in iPhoto before going to RAW converter. I "Reverted to Original" all three photos, after which I was able to open all of them in RAW Converter without a problem.
So, MANY thanks, TD, for leading me to the solution. And you also taught me some new techniques. Every little bit helps.
David

Cs5 bridge has option..open in raw converter...greyed out

i just purchased and installed cs5, love the updates i have seen yet.....but cs5 bridge has stopped opening raw files, it actually never did open the first one..the option to open in camera raw is greyed out...i can use photoshop to open raws, one at a time...tried updating to raw converter 5.7,. cs5 still works, bridge does not...any thoughts?
Malcolm

ACR 5.7 is for CS4.
For CS5 you need Camera Raw 6.1.
You have to have the ACR in the correct folder and only one file there.

PS CC 2014 DNG and RAW 8.5 did not update with the rest of the CC package. I downloaded/installed the DNG/RAW converter but how do you install w/i CC 2014 plugins

PS CC 2014 DNG and RAW 8.5 did not update with the rest of the CC package. I downloaded/installed the DNG/RAW converter but how do you install w/i CC 2014 plugins

Thanks John. I have tried solutions 1 to 3 from (-http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.h tml) and they do not work. So I presume that all I can do is to remove all 25 CC applications and start again!
Incidently, ( http://www.adobe.com/downloads/updates/ ) does not list Adobe Camera Raw 8.4 as an update even though Adobe have announced that it is available (http://blogs.adobe.com/lightroomjournal/2014/04/camera-raw-8-4-and-dng-converter-8-4-now-a vailable.html). The same applies for Adobe Premiere Pro 7.2.2 (http://blogs.adobe.com/premierepro/2014/04/premiere-pro-cc-7-2-2.html). If they are not available this would explain why I cannot download them but I am very suprised that Adobe didn't mention this when I contacted them.
Anyway thanks again

RAW-Converter für Olympus OM-D?

Similar Messages

Maybe you are looking for