RAW Converter Problem

my pictures with the extension .NEF in Aperture all look wrong. Somehow they are either blown out, or purple or green. Can anyone help? I usually import images in jpg and NEF. The jpg images are ok once imported in the aperture library, but the NEF images are as what was described above. What's wrong?
ps. i tried to re-install aperture but the same problem exists

Please send feedback to the Aperture team at Apple, they already must know about it, but the more folks complain, the better. It really has been a very hard ride for most users of Aperture with this buggy release. I love Apple and Aperture, but their total silence on important issues like this is so frustrating.
http://www.apple.com/feedback/aperture.html

Similar Messages

Canon Powershot S120 Adobe Lightroom RAW converter problem

Have a MacBook running Yosemite. I am an underwater photographer so rely on using White Balance to get colour into my photos. Since upgrading Lightroom from 5.3 or 5.6 to 5.7 all my Canon S120 RAW files change colour after import and become a wishy washy green. As one moves along the filmstrip, the Histogram shows calculating and all the photos lose their colour, as if the White Balance is being removed. My previous catalogue, same camera, Lightroom 5.3 or 5.6 photos import as they look on the camera. Have discussed with Canon and they think an Adobe Codec RAW converter problem. Do you have additional Codecs for Canon S120? Canon happy to discuss problem. Their reference: 1-3374995525. Please help.

If you look at the Tint slider with As Shot WB set, you’ll see it is maxed out at 150 for all three of your sample images.
I think this means that LR’s DNG Profiles don’t have the range to entirely neutralize the WB so your images are left with the wrong WB and no way to fix it.
Adobe profiles don’t do a good job in extreme lighting situations, especially with an overabundance of blue light which underwater pictures typically have.
You can mess with the Calibration sliders a bit and get some of the colors to be more like the camera-JPGs have, but some colors will still be different.
If you have an X-Rite color-checker, that you could photograph without getting it wet, then you could make a custom camera calibration profile for that specific lighting scenario and maybe it’d work, but maybe the profiles still can’t extend beyond a certain point. I am also not sure how you’d keep the color-checker dry underwater.

Problems upgrading raw converter for cs6

I have a cs6 license and recently had an update applied to the raw converted to handle my sony a7s. I also wanted to upgrade the raw converted for my cs6 version on an mac I use at a second home. It did do an upgrade but not high enough to deal with the new camera.
I'm on a mac mini running osx 10.6.8. When I try to open a sony arw file in camera raw if gives a dialog box indicating it can't open the file and gives a link to a spread sheet showing the minimum version of camera raw of 8.5 to open the a7s arw file. If I look at the version of camera raw I'm using I get 7.0.0.308. To do an update for the raw converter while I am in bridge I go to help and use the update item. I did an update to 7.0.0.308 when I originally ran the update option but hat is obviously not high enough to deal with the sony arw files. I basically did the same thing on my main computer and had no problem.
Any ideas?

Here is an installer for camera raw 8.3, so at least you'll have the newest version that mac os x 10.6.8 supports.
http://swupdl.adobe.com/updates/oobe/aam20/mac/PhotoshopCameraRaw7-7.0/8.3.52/setup.dmg
If the above doesn't work, you can try a manual install by following the instructions in the following adobe kb.
Adobe Camera Raw Help | Camera Raw/DNG Converter 8.4 on Mac OS 10.6, Windows XP, and Vista

After having installed Mavericks I have problems with PSCS5 and the RAW converter. The glider for Exposure goes back to zero, when I use the fill in glider.

When I use PSCS5 after having upgraded to Mavericks I have problems when I use the RAW converter. The glider for exposure goes back to sero, hven I use the glider for fill in light, that means that my PSCS5 program not can be used. What do I do?

Single click on the Home button. Then double click on the Home button. In the recently used row, touch and hold the Contact app till they start to wiggle and then tap the minus sing by the contacts app.
Also make sure the Contact program on your computer is closed.

Problem with dng raw converter

I install 8.5 raw converter but Lightroom did not see that Why?

These are two separate programs that do not know about each other's existence.
You use the DNG converter as a standalone program to convert RAW photos to DNG. Then you import the DNGs into Lightroom.

Raw converter stopped working and is missing -- running CC and Windows Vista SP 2.

I have reinstalled Photoshop twice from the cloud. RAW converter still missing. Please help.
If I try to install the 7.1 Converter download, I get a failed message saying this update is not for me. The 8.3 DNG converter installed, but the problem persists.

ACR 8.3 is what you want, that is the current version for Photoshop CC. You can check the installed ACR version in Help > About Plug-In > Camera Raw (or open the CC desktop app and see if it reports Photoshop as up to date).
You don't have any need for the DNG converter, since you have Photoshop CC and thus the very latest ACR version with all the newest camera support.
(The DNG converter is a standalone application, completely independent from Photoshop. It converts native camera files to the universal DNG format, so that they can be read by older ACR versions that don't have direct native support for that camera).
If ACR 8.3 is indeed installed, but not working as it should, or even missing, that's a different problem.

RAW converter, PSE 9 and Windows 8

I've just upgraded from Windows 7 to 8 and now find that when I try and open Canon CR2 files in the PSE 9 RAW converter, I get a message saying PSE can't open the file because it is "the wrong type of file". TIF and Jpeg files open without any problem, so it seems to be just the RAW converter that is the problem.
Also, when I download pictures from my camera into the Organiser, I am no longer given the option to select only certain images to be downloaded and given a particular folder. The only route that seems to be available is to download everything on the camera card.
Anybody got any ideas how to solve these two problems? All suggestions gratefully received.
Julian

Launch Full Edit and go to the menu:
Help >> About Plug-in >> Camera Raw
Check the installed version.
The last update for PSE9 was version 6.5
Have you changed your Canon model?

Photo 6 RAW photos don't all open in PSE 6 RAW converter

I have iphoto 6 and PSE 6 installed on an Intel iMac OS X 10.4.11 with: 2GB RAM, 250GB HD and over half of that free.
Recently have begun shooting RAW. From iPhoto I have been editing everything in PSE6 without a problem. To open the RAW photos in the "RAW Converter" I have gone to iPhoto preferences, clicked on Advanced tab, and checked the box "Use RAW file with external editor".
My problem is this: Most of the RAW(NEF) photos in iphoto will open in the RAW converter as they are designed to do when I double click on the thumb nails in iPhoto. However, about 25% of them will not go to the converter. They go, instead, to the regular PSE6 editing window as a JPEG, and nothing I can do will get that photo into the RAW converter. And these are photos from the same series just uploaded to iPhoto6. It makes no sense to me.
What am I missing and what can I do to correct this problem. I would appreciate any help anyone can give. Thanks.
David

TD
I'm feeling just a little sheepish right now.
It was your statement that it was either a) I'm imagining it or b) it's a very rare problem. I knew it wasn't (a) and I suspected (b) was probably not it either because too often when something is very rare, there is something simple hidden in the problem.
So I did some serious reviewing of the problem. I tried to think of anything I had done to those 3 photos that kept them from opening in RAW converter, when all others did fine. It suddenly occurred to me that I had cropped those three, and would have done it in iPhoto before going to RAW converter. I "Reverted to Original" all three photos, after which I was able to open all of them in RAW Converter without a problem.
So, MANY thanks, TD, for leading me to the solution. And you also taught me some new techniques. Every little bit helps.
David

Mac OS-X Raw Converter for Canon produces sometimes wrong colors

I have just acquired a Canon 5D Mark II and I have some problems with the RAW converter supplied with Mac OS. The image is 21 Megapixels and it is the result of a long exposure.
If I use the Canon Digital Photo Professional to produce the JPEG, I get correct results. If I use the
RAW converter supplied by Apple (used in Aperture, IPhoto, and Preview), then the picture has a
mauve-violet color. I can supply the test images along with the JPEG produced by the Canon software.
Thanks in advance,
Jean

Sounds like you may want to file a bug report with Apple. You can use Aperture's "submit feedback" button.
This is a user to user forum, so we can't help you here with this kind of issue.

Camera Raw noise problem in Photoshop CS6

Opening a Canon .CR2 in Photoshop CS6, Camera Raw generates a significant amount of noise or graininess in the image compared with the simultaneously saved .JPG file. This results in the image from the raw file being of reduced quality. I never had this problem using Photoshop CS5.
Is this the result of some setting being turned on? If so, I have been unable to figure out which one. The only other possibility is that there is a severe flaw in the latest version of the Camera Raw plugin.
Can anyone out there shed any light on this?

You're using a raw converter to increase your access to more control. Among the controls you now have at your disposal are color and luminance noise reduction.
The thing is, what you'll want to do is to develop a set of Camera Raw Defaults that start your conversions off as you would like, then save that default so it pre-sets all the controls for each new image you open. In my case, I have a fair bit of noise reduction dialed-in by default for my Canon EOS-40D images.
You may also want to turn down the default sharpening, which will bring up noise in itself. I've done that as well, as you can see.
-Noel

How to open non-RAW file in RAW Converter

I'm unable to open a non-RAW (i.e. jpg) file in the RAW Converter in either Organizer or Editor, using instructions in Brundage book.
Would appreciate a suggested procedure.

Barbara B.
Your suggestion to try another file resolved the Converter issue. I found that I can open any jpg or tif file in any album that appears in the
Windows Explorer. So the problem was not with the RAW Converter. Instead, I found another problem. The ENTIRE Album
containing the file I had been trying to open is missing from the Windows Explorer (and I cannot open the file from the Album
showing in the Organizer -- while I'm in the Editor!).
So -- can you give me any help with this new problem of an Album that shows in the Organizer but not the Windows Explorer?

Raw conversion problem

I have Photoshop Elements 6 (Camera Raw 4.2) and a Nikon D7000 (Camera Raw 6.3 minimum). I am using DNG converter 8.1 to create DNG files, but these still will not open in Elements. I am selecting compatibility of Camera Raw 4.1 in the conversion program. What else can I do?

Sorry it took me a long time to reply. If I send to dropbox (which I can), can I restrict the images to specific email addresses, or will it be accessible to anyone? Not that I care about the image particularly, as it was only a test.
Once I have an idea of this, I will do a final test & send the data to dropbox.
Date: Wed, 19 Mar 2014 15:12:51 -0700
From: [email protected]
To: [email protected]
Subject: Raw conversion problem
    Re: Raw conversion problem
    created by ssprengel in Photoshop Elements - View the full discussion
It seems like you're doing everything that you're supposed to be doing, and it is not working. I don't have an explanation why that is, but can you share an original NEF and its DNG via www.dropbox.com or similar and others can test with a newer version of ACR to make sure there isn't something corrupted wtih the files.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6225513#6225513
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6225513#6225513
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6225513#6225513. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Photoshop Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Can anyone help me find the raw converter for Nikon D4/ I have Aperture 3.0 with Snow Leopard. thanks in advance

hi,
Having problems finding the correct download for a Nikon D4 raw converter.
Can anyone help direct me to the right link?
I am using Aperture 3.0 with Snow leopard.
thanks in advance
Mark

Nikon D4 is supported by Digital Camera RAW Compatibility Update 3.10:
http://support.apple.com/kb/DL1510
Check the System requirements, if it is compitability with your installation Mac OS X 10.6.8.
Regards
Léonie

Using old raw converter - why?

Aperture 3.2.3 has started importing images and processing them with an old raw converter for some reason. When I look at the image the first brick of the Adjustments tab contains a warning that the raw file was convertered using an old raw converter and giving me the option to update the processing. This has just happened all of a sudden, and I can't find any preferences to change the processing engine to the proper converter. Any ideas? Thanks.

I just noticed that there's an update to 3.2.4 anf to the raw converter. I applied those updates and the problem has gone away. Not sure why it happened in the first place 'though. One of those things...

Lightroom Photoshop and Camera Raw Converter

Hi,
I use Adobe creativ Cloud with Lightroom 5 and PS CC CS6. And I installed Topaz Adjust as a Plugin. On my Computer is Windows 8.1, 64 Bit installed,
I tryd to open a Photo *.CR2 in order to develop it with the Camera Raw Converter from PS CS6, but the converter does not start, it opens only PS CS6
Can any body help me with this Problem?
Thanks a lot,
Trusty

The support for that camera was added in the very latest release of Lightroom, version 5.7.1. Having downloaded Camera Raw 8.7.1 will have no effect on Lightroom because Lightroom doesn't use the Camera Raw plug-in. You need to make sure you have updated Lightroom to the very latest release in order to have support for that camera.

RAW Converter Problem

Similar Messages

Maybe you are looking for