Raw CR2 Images Deleted when loading into Bridge.

I was loading raw cr2 images from a compact card reader into Bridge. About half way through, the program stopped, I received an error message and then when I attempted to exit all the files were deleted from the card. Only the photos that had been loaded prior to the error message survived. The camera also has a SD slot and when I then attempted to load the jpeg photos saved to the SD card, the program froze while accessing and displaying the thumbnail images and would not load any content from the SD card. Any answers as to why Bridge failed and the photos were deleted. This is not the first time this has occured.

Thanks very much for that lead, NormanPCN. I do have Auto Tone checked, though the rendered files in the example above do not have XMP sidecars. I will try unchecking Auto Tone even so, and post back when I see what happens.
Thanks again,
Kieren
EDIT: Bingo! I took Auto Tone off in ACR Preferences (in Bridge) and the non-RAW files immediately regenerated thumbs and previews. They now are indistinguishable from the PSD. There is still the very slight difference which I mentioned between the PSD and the CR2. While that seems odd, it is small enough to be relatively trivial.
Many thanks!
Thumbnail view w/o Auto:

Similar Messages

How do I import RAW (CR2) images from Canon S100 into Photoshop Elements 8?

From Adobe support I downloaded Camera_Raw_6_1.zip. Extracted files, cut original Camera Raw.8bi file and pasted in a new folder. Then copied the new version of Camera Raw.8bi into the empty file format location. Still get "Cannot open ...CR2 because it is the wrong type of file."
Thanks for any help.

Hi,
The Canon S100 wasn't supported until version 6.6 of camera raw and that isn't supported by pse 8.
You options are to either upgrade to pse version 10 or use the DNG converter
for windows http://www.adobe.com/support/downloads/detail.jsp?ftpID=5310
or
for mac http://www.adobe.com/support/downloads/detail.jsp?ftpID=5309
Brian

Is it possible to tag a pdf with 'reject', so when it loads into Bridge, it will be pre-rejected?

Is it possible to tag a pdf with 'reject', so when it loads into Bridge, it will be pre-rejected and not view (so long as 'show reject files' is unchecked in Bridge)? - Please see screen shot.
We're wanting to have all pdf's initially set, so they don't view in Bridge, until the 'reject' tag is then removed.
Any help would be great! Thanks.

Well, not possible directly because the Acrobat interface doesn't allow changing Bridge's ratings and labels. But as Omke Oudeman showed over in the Bridge Scripting forum, they are stored in the XMP metadata, where "Reject" seems to be an xmp:Rating of -1. Thus you may be able to add this bit of metadata within Acrobat Pro by using the Append... [XMP template] command -- assuming you can come up with an XMP template, and can find the command buried in the interface (in Acrobat 9 it is behind the Additional Metadata button on the Properties/ Description tab, and then from there under Advanced). Another route might be via Javascript. Either way, before investing much time you should consider that most software won't see labels and ratings you add to the XMP metadata, and, as Omke mentions in that thread, their rendering seems somewhat fragile even in Bridge.
Another route might be adapting a metadata category already available in Acrobt's interface: Keywords, say, "Approved" and "NotApproved". (If you can't touch the Keywords, maybe you could re-purpose another of Acrobat's categories; and of course my suggestions are not related to Acrobat's stock stamps "Approved" and "Not Approved," a different kettle of fish). Keywords might suffice for you to filter views in Bridge, but if you really want Bridge to show files with "Reject" then they must carry that tag. If neither an XMP template nor an Acrobat Javascript serves, I imagine a Bridge script could apply "Reject" to files with the keyword NotApproved. Of course, for any PDFs whose status changes you'd need to adjust both the Reject (xmp:Rating -1) and the keyword; perhaps another script could un-Reject and change the keyword to Approved in one step.

Importing RAW (CR2) images to iPhoto (7.1.1)

I'm having problems importing RAW (CR2) images to iPhoto (7.1.1) from my Canon Powershot G9. It imports the JPEGs with no problem, but says the following for RAW (CR2): "The following files could not be imported (they may be an unrecognized file type or the files may not contain valid data".

Yellowfish
That would be because the G9 RAWs are not supported at this time.
Regards
TD

Images fail to load into the browser

Hello,
Sometimes images fail to load into the browser (they show up as a red "X"). Does anyone know why? Refreshing often loads them correctly, but then a different image will not load (and show a red "X").
Thanks very much,
Andy

Hi Vikas,
Thank you very much for your help on this. I am now using a faster computer and the problem no longer happens. I did understand your suggestion - I was brainstorming ideas to make changes to APEX to account for slow computers, or computers without enough memory. To somehow guarantee a level of service for APEX applications at the end user's browser. Similar to how Oracle Enterprise manager can help guarantee certain SLAs for J2EE web applications, by monitoring performance from the browser all the way back to the disk. (I'm not sure if it 100% can do this today, but I believe this is the direct it is headed).
Well, I suppose if everyone uses fast computers this is no longer an issue. But, sometimes fast computers are hard to come by.
Thanks again for your help,
Andy

Have CS6, but my Mark 5D III CR2 images won't load, can't install plug in 6.7!

I just upgraded to CS6, but my Canon Mark 5D III CR2 images won't load, and everytime I try to download the 6.7 plug-in, it tells me it is "not for me." Help!

Get the ACR 7.1 RC (beta) at Labs.Adobe.com.

TIFF & JPEG renders of RAW files appear different when viewed in Bridge

I am working with the demo of Photoshop CS6, with ACR 7.1. CS6 System Info will appear at the bottom of this post. Summary: AMD Phenom II x6 1090T, 16GB RAM, Win7-64bit, nVidia GTX 460 video w/1GB RAM, approx. 2.5 TB free space on multiple internal physical drives, Canon 50D, CR2 files. I have a camera profile generated through Profile Editor, and the monitor is calibrated with i-1 Match.
I have been practicing with the new Basic Panel controls (Process 2012). When I felt that I was getting the hang of them I started saving JPEG and TIFF files and noticed differences between what appears in Bridge and ACR. I worked on this for some time and searched out some other discussions in the Forum which seemed to talk about similar results. I have now tried Image Processor via Bridge, Save Image in ACR, and Open>Save manually in PS CS6. By whatever route, the TIFFs and JPEGs are different (lighter in the following examples, but this is not always the case), while PSD saves seem to be close, but not identical to the CR2 when viewed in Bridge or Photoshop. Here is a screen capture of Bridge thumbnails which show the differences.
I hope the labels come through legibly. The two images on the second row are CR2 and PSD respectively. What is really odd to me is that when I resaved the PSD file as a TIFF, the same sort of difference shows up in the TIFF. (See _MG_7960_via_PSD.tif above.) I have uploaded the CR2, its XMP, a TIFF and a JPEG on Sendspace (107 MB). I did this earlier in my experiments and regret that the file naming is not as informative as might be.
http://www.sendspace.com/file/t0lhko
I have run a few other ACR adjusted CR2 images through Image Processor and seen a variety of differences between the rendered files and the RAW versions. The differences seem to be in Exposure and Contrast. Most of these looked somewhat darker, unlike the examples above.
I will happily provide any other information on request. Thanks!
Photoshop System Info:
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: AMD CPU Family:15, Model:10, Stepping:0 with MMX, SSE Integer, SSE FP, SSE2, SSE3
Physical processor count: 6
Processor speed: 3511 MHz
Built-in memory: 16382 MB
Free memory: 13415 MB
Memory available to Photoshop: 14766 MB
Memory used by Photoshop: 71 %
Image tile size: 132K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: GeForce GTX 460/PCIe/SSE2
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 1200, right: 1920
Video Card Number: 1
Video Card: NVIDIA GeForce GTX 460
OpenCL Unavailable
Driver Version: 8.17.13.142
Driver Date: 20120515000000.000000-000
Video Card Driver: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Video Mode: 1920 x 1200 x 4294967296 colors
Video Card Caption: NVIDIA GeForce GTX 460
Video Card Memory: 1024 MB
Video Rect Texture Size: 16384
Serial number: Tryout Version
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
Temporary file path: C:\Users\Kieren\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
E:\, 770.4G, 644.1G free
K:\, 931.5G, 482.3G free
L:\, 1.82T, 854.4G free
H:\, 1.75T, 505.2G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
   A3DLIBS.dll   A3DLIB Dynamic Link Library   9.2.0.112
   ACE.dll   ACE 2012/01/18-15:07:40   66.492997   66.492997
   adbeape.dll   Adobe APE 2012/01/25-10:04:55   66.1025012   66.1025012
   AdobeLinguistic.dll   Adobe Linguisitc Library   6.0.0
   AdobeOwl.dll   Adobe Owl 2012/02/09-16:00:02   4.0.93   66.496052
   AdobePDFL.dll   PDFL 2011/12/12-16:12:37   66.419471   66.419471
   AdobePIP.dll   Adobe Product Improvement Program   6.0.0.1654
   AdobeXMP.dll   Adobe XMP Core 2012/02/06-14:56:27   66.145661   66.145661
   AdobeXMPFiles.dll   Adobe XMP Files 2012/02/06-14:56:27   66.145661   66.145661
   AdobeXMPScript.dll   Adobe XMP Script 2012/02/06-14:56:27   66.145661   66.145661
   adobe_caps.dll   Adobe CAPS   6,0,29,0
   AGM.dll   AGM 2012/01/18-15:07:40   66.492997   66.492997
   ahclient.dll    AdobeHelp Dynamic Link Library   1,7,0,56
   aif_core.dll   AIF   3.0   62.490293
   aif_ocl.dll   AIF   3.0   62.490293
   aif_ogl.dll   AIF   3.0   62.490293
   amtlib.dll   AMTLib (64 Bit)   6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00)   1.000000
   ARE.dll   ARE 2012/01/18-15:07:40   66.492997   66.492997
   AXE8SharedExpat.dll   AXE8SharedExpat 2011/12/16-15:10:49   66.26830   66.26830
   AXEDOMCore.dll   AXEDOMCore 2011/12/16-15:10:49   66.26830   66.26830
   Bib.dll   BIB 2012/01/18-15:07:40   66.492997   66.492997
   BIBUtils.dll   BIBUtils 2012/01/18-15:07:40   66.492997   66.492997
   boost_date_time.dll   DVA Product   6.0.0
   boost_signals.dll   DVA Product   6.0.0
   boost_system.dll   DVA Product   6.0.0
   boost_threads.dll   DVA Product   6.0.0
   cg.dll   NVIDIA Cg Runtime   3.0.00007
   cgGL.dll   NVIDIA Cg Runtime   3.0.00007
   CIT.dll   Adobe CIT   2.0.5.19287   2.0.5.19287
   CoolType.dll   CoolType 2012/01/18-15:07:40   66.492997   66.492997
   data_flow.dll   AIF   3.0   62.490293
   dvaaudiodevice.dll   DVA Product   6.0.0
   dvacore.dll   DVA Product   6.0.0
   dvamarshal.dll   DVA Product   6.0.0
   dvamediatypes.dll   DVA Product   6.0.0
   dvaplayer.dll   DVA Product   6.0.0
   dvatransport.dll   DVA Product   6.0.0
   dvaunittesting.dll   DVA Product   6.0.0
   dynamiclink.dll   DVA Product   6.0.0
   ExtendScript.dll   ExtendScript 2011/12/14-15:08:46   66.490082   66.490082
   FileInfo.dll   Adobe XMP FileInfo 2012/01/17-15:11:19   66.145433   66.145433
   filter_graph.dll   AIF   3.0   62.490293
   hydra_filters.dll   AIF   3.0   62.490293
   icucnv40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615
   icudt40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615
   image_compiler.dll   AIF   3.0   62.490293
   image_flow.dll   AIF   3.0   62.490293
   image_runtime.dll   AIF   3.0   62.490293
   JP2KLib.dll   JP2KLib 2011/12/12-16:12:37   66.236923   66.236923
   libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)
   libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   10.0
   LogSession.dll   LogSession   2.1.2.1640
   mediacoreif.dll   DVA Product   6.0.0
   MPS.dll   MPS 2012/02/03-10:33:13   66.495174   66.495174
   msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcm90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   msvcp100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1
   msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcp90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   msvcr100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1
   msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcr90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   pdfsettings.dll   Adobe PDFSettings   1.04
   Photoshop.dll   Adobe Photoshop CS6   CS6
   Plugin.dll   Adobe Photoshop CS6   CS6
   PlugPlug.dll   Adobe(R) CSXS PlugPlug Standard Dll (64 bit)   3.0.0.383
   PSArt.dll   Adobe Photoshop CS6   CS6
   PSViews.dll   Adobe Photoshop CS6   CS6
   SCCore.dll   ScCore 2011/12/14-15:08:46   66.490082   66.490082
   ScriptUIFlex.dll   ScriptUIFlex 2011/12/14-15:08:46   66.490082   66.490082
   tbb.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406
   tbbmalloc.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406
   TfFontMgr.dll   FontMgr   9.3.0.113
   TfKernel.dll   Kernel   9.3.0.113
   TFKGEOM.dll   Kernel Geom   9.3.0.113
   TFUGEOM.dll   Adobe, UGeom©   9.3.0.113
   updaternotifications.dll   Adobe Updater Notifications Library   6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   6.0.0.24
   WRServices.dll   WRServices Friday January 27 2012 13:22:12   Build 0.17112   0.17112
   wu3d.dll   U3D Writer   9.3.0.113
Required plug-ins:
   3D Studio 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Accented Edges 13.0
   Adaptive Wide Angle 13.0
   ADM 3.11x01
   Angled Strokes 13.0
   Average 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Bas Relief 13.0
   BMP 13.0
   Camera Raw 7.1
   Chalk & Charcoal 13.0
   Charcoal 13.0
   Chrome 13.0
   Cineon 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Clouds 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Collada 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Color Halftone 13.0
   Colored Pencil 13.0
   CompuServe GIF 13.0
   Conté Crayon 13.0
   Craquelure 13.0
   Crop and Straighten Photos 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Crop and Straighten Photos Filter 13.0
   Crosshatch 13.0
   Crystallize 13.0
   Cutout 13.0
   Dark Strokes 13.0
   De-Interlace 13.0
   Dicom 13.0
   Difference Clouds 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Diffuse Glow 13.0
   Displace 13.0
   Dry Brush 13.0
   Eazel Acquire 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Embed Watermark 4.0
   Entropy 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Extrude 13.0
   FastCore Routines 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Fibers 13.0
   Film Grain 13.0
   Filter Gallery 13.0
   Flash 3D 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Fresco 13.0
   Glass 13.0
   Glowing Edges 13.0
   Google Earth 4 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Grain 13.0
   Graphic Pen 13.0
   Halftone Pattern 13.0
   HDRMergeUI 13.0
   IFF Format 13.0
   Ink Outlines 13.0
   JPEG 2000 13.0
   Kurtosis 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Lens Blur 13.0
   Lens Correction 13.0
   Lens Flare 13.0
   Liquify 13.0
   Matlab Operation 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Maximum 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Mean 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Measurement Core 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Median 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Mezzotint 13.0
   Minimum 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   MMXCore Routines 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Mosaic Tiles 13.0
   Multiprocessor Support 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Neon Glow 13.0
   Note Paper 13.0
   NTSC Colors 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Ocean Ripple 13.0
   Oil Paint 13.0
   OpenEXR 13.0
   Paint Daubs 13.0
   Palette Knife 13.0
   Patchwork 13.0
   Paths to Illustrator 13.0
   PCX 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Photocopy 13.0
   Photoshop 3D Engine 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Picture Package Filter 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Pinch 13.0
   Pixar 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Plaster 13.0
   Plastic Wrap 13.0
   PNG 13.0
   Pointillize 13.0
   Polar Coordinates 13.0
   Portable Bit Map 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Poster Edges 13.0
   Radial Blur 13.0
   Radiance 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Range 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Read Watermark 4.0
   Reticulation 13.0
   Ripple 13.0
   Rough Pastels 13.0
   Save for Web 13.0
   ScriptingSupport 13.0
   Shear 13.0
   Skewness 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Smart Blur 13.0
   Smudge Stick 13.0
   Solarize 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Spatter 13.0
   Spherize 13.0
   Sponge 13.0
   Sprayed Strokes 13.0
   Stained Glass 13.0
   Stamp 13.0
   Standard Deviation 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Sumi-e 13.0
   Summation 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Targa 13.0
   Texturizer 13.0
   Tiles 13.0
   Torn Edges 13.0
   Twirl 13.0
   U3D 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Underpainting 13.0
   Vanishing Point 13.0
   Variance 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Variations 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Water Paper 13.0
   Watercolor 13.0
   Wave 13.0
   Wavefront|OBJ 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   WIA Support 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Wind 13.0
   Wireless Bitmap 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   ZigZag 13.0
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
   Mini Bridge
   Kuler
Installed TWAIN devices: NONE

Thanks very much for that lead, NormanPCN. I do have Auto Tone checked, though the rendered files in the example above do not have XMP sidecars. I will try unchecking Auto Tone even so, and post back when I see what happens.
Thanks again,
Kieren
EDIT: Bingo! I took Auto Tone off in ACR Preferences (in Bridge) and the non-RAW files immediately regenerated thumbs and previews. They now are indistinguishable from the PSD. There is still the very slight difference which I mentioned between the PSD and the CR2. While that seems odd, it is small enough to be relatively trivial.
Many thanks!
Thumbnail view w/o Auto:

How do I get my XML numeric values to show up when loaded into flash?

Hi there,
I've created an AS2 3D carousel It loads text values in the "content" section of the code below - including numbers and special characters into the .swf but...
What I can't figure out, is how to get it so that the "Tooltip" loads the text into the movieclip, but can also have numeric and special characters in it.
For example, I need the title of one of the icons on this carousel to be "3D Images," but only the "D Images" shows up from the XML text for the tooltip. The content when a user clicks on the icon can include numbers, just not the titles for some reason.
http://iongeo.com/collaboration_test_dev/video_arctic_imaging.html
I think it has something to do with the way that my text is loaded from the xml document specifically for the tooltip and tipText for the movie clip. Can numeric values be loaded into a movie clip in AS2? PLEASE HELP!
import mx.utils.Delegate;
import mx.transitions.Tween;
import mx.transitions.easing.*;
var numOfItems:Number;
var radiusX:Number = 300;
var radiusY:Number = 75;
var centerX:Number = Stage.width / 2;
var centerY:Number = Stage.height / 2;
var speed:Number = 0.05;
var perspective:Number = 130;
var home:MovieClip = this;
theText._alpha = 0;
theHeader._alpha = 0;
var tooltip:MovieClip = this.attachMovie("tooltip","tooltip",10000);
tooltip._alpha = 0;
var xml:XML = new XML();
xml.ignoreWhite = true;
xml.onLoad = function()
    var nodes = this.firstChild.childNodes;
    numOfItems = nodes.length;
    for(var i=0;i<numOfItems;i++)
        var t = home.attachMovie("item","item"+i,i+1);
        t.angle = i * ((Math.PI*2)/numOfItems);
        t.onEnterFrame = mover;
        t.toolText = nodes[i].attributes.tooltip;
        t.content = nodes[i].attributes.content;
        t.header = nodes[i].attributes.header;
        t.icon.inner.loadMovie(nodes[i].attributes.image);
        t.r.inner.loadMovie(nodes[i].attributes.image);
        t.icon.onRollOver = over;
        t.icon.onRollOut = out;
        t.icon.onRelease = released;
function over()
    //BONUS Section
    home.tooltip.tipText.text = this._parent.toolText;
    home.tooltip._x = this._parent._x;
    home.tooltip._y = this._parent._y - this._parent._height/2;
    home.tooltip.onEnterFrame = Delegate.create(this,moveTip);
    home.tooltip._alpha = 100;
function out()
    delete home.tooltip.onEnterFrame;
    home.tooltip._alpha = 0;
function released()
    //BONUS Section
    home.tooltip._alpha = 100;
    for(var i=0;i<numOfItems;i++)
        var t:MovieClip = home["item"+i];
        t.xPos = t._x;
        t.yPos = t._y;
        t.theScale = t._xscale;
        delete t.icon.onRollOver;
        delete t.icon.onRollOut;
        delete t.icon.onRelease;
        delete t.onEnterFrame;
        if(t != this._parent)
            var tw:Tween = new Tween(t,"_xscale",Strong.easeOut,t._xscale,0,1,true);
            var tw2:Tween = new Tween(t,"_yscale",Strong.easeOut,t._yscale,0,1,true);
            var tw3:Tween = new Tween(t,"_alpha",Strong.easeOut,100,0,1,true);
        else
            var tw:Tween = new Tween(t,"_xscale",Strong.easeOut,t._xscale,100,1,true);
            var tw2:Tween = new Tween(t,"_yscale",Strong.easeOut,t._yscale,100,1,true);
            var tw3:Tween = new Tween(t,"_x",Strong.easeOut,t._x,150,1,true);
            var tw4:Tween = new Tween(t,"_y",Strong.easeOut,t._y,250,1,true);
            var tw5:Tween = new Tween(theText,"_alpha",Strong.easeOut,0,100,1,true);
            var tw5:Tween = new Tween(theHeader,"_alpha",Strong.easeOut,0,100,1,true);
            theText.text = t.content;
            theHeader.header = t.header;
            var s:Object = this;
            tw.onMotionStopped = function()
                s.onRelease = unReleased;
function unReleased()
    //BONUS Section
    var sou:Sound = new Sound();
    sou.attachSound("sdown");
    sou.start();
    delete this.onRelease;
    var tw:Tween = new Tween(theText,"_alpha",Strong.easeOut,100,0,0.5,true);
    var tw:Tween = new Tween(theHeader,"_alpha",Strong.easeOut,100,0,0.5,true);
    for(var i=0;i<numOfItems;i++)
        var t:MovieClip = home["item"+i];
        if(t != this._parent)
            var tw:Tween = new Tween(t,"_xscale",Strong.easeOut,0,t.theScale,1,true);
            var tw2:Tween = new Tween(t,"_yscale",Strong.easeOut,0,t.theScale,1,true);
            var tw3:Tween = new Tween(t,"_alpha",Strong.easeOut,0,100,1,true);
        else
            var tw:Tween = new Tween(t,"_xscale",Strong.easeOut,100,t.theScale,1,true);
            var tw2:Tween = new Tween(t,"_yscale",Strong.easeOut,100,t.theScale,1,true);
            var tw3:Tween = new Tween(t,"_x",Strong.easeOut,t._x,t.xPos,1,true);
            var tw4:Tween = new Tween(t,"_y",Strong.easeOut,t._y,t.yPos,1,true);
            tw.onMotionStopped = function()
                for(var i=0;i<numOfItems;i++)
                    var t:MovieClip = home["item"+i];
                    t.icon.onRollOver = Delegate.create(t.icon,over);
                    t.icon.onRollOut = Delegate.create(t.icon,out);
                    t.icon.onRelease = Delegate.create(t.icon,released);
                    t.onEnterFrame = mover;
function moveTip()
    home.tooltip._x = this._parent._x;
    home.tooltip._y = this._parent._y - this._parent._height/2;
xml.load("icons.xml");
function mover()
    this._x = Math.cos(this.angle) * radiusX + centerX;
    this._y = Math.sin(this.angle) * radiusY + centerY;
    var s = (this._y - perspective) /(centerY+radiusY-perspective);
    this._xscale = this._yscale = s*100;
    this.angle += this._parent.speed;
    this.swapDepths(Math.round(this._xscale) + 100);
this.onMouseMove = function()
    speed = (this._xmouse-centerX)/8000;

Kglad, you are my HERO!
Thanks so much for your reply, I did not know about the embed options within flash...
Mike

Why does LR name my images "Edit8bit" When opening into Photoshop?

I have preferences>external editing>Bit Depth set to 16 bits/component. So why when I open my images is the file name saying they are 8 bit? Photoshop shows them as "RGB/16". The image mode shows 16 bit inside of photoshop.
These images start out in Lightroom as 12 or 14 bit RAW (NEF) images. I'm just concerned that some sort of 8 bit conversion is happening before my images get loaded into photoshop and I am losing some color information in the process? Am I?
I am currently on LR 5.2 and Photoshop CC 14.1.2 But this has been happening for many versions of LR and Photoshop

What have you got set as the External Editing File Naming scheme, bottom of the External Editing tab in the Lightroom Preferences? That's where the file name is (user) controlled:

Reduce file size of image a user loads into image field in form

Hello,
I'm a Mediadesigner from Germany and I started to work with Lifcycle Designer about a year ago.
I already made some smaller forms with different fields.
Now I have a special form with empty image fields, that allow the user to put in his images.
For the form goes out to so many different people, some of them just take the images as they are, load them into the form and so the filesize of the pdf grows. For your information: the filled out pdf will be sent back to us by e-mail.
So here is my question: is it possible to reduce the filesize of that images when it is loaded into the fild or when the filled in form is saved.
For example that I can say: "Take all images and make them 72dpi and max. height 500px"?
Thanks for your help in advance!
Carola

Hi,
there is now way to reduce the real file size or dimension of an imported image.
But you can checkt the file size and show a warning to the users to use a smaller file.
Here's a sample which describes how to do so:
http://blogs.adobe.com/formfeed/2011/09/validate-image-size.html

Master data check not working when loading into and ODS object

Hi guys,
we are loading transactional data into an ODS from a flat file.
In the infopackage, we have checked the option :
"Do not update data if no master data exists for a characteristic".
This option seems to be unreliable :
For some characteristics (it seems those loaded using transfer rules (routines)), incorrect data is still loaded into the ODS even if no entry exist in the associated infoobject master data table.
Any help appreciated.
Many thanks !
Pierre-Yves

Hi Dear,
please delete all the incorrect master data from the master data characteristic first and then try to uploading the data again .It should work, because there migth be some master data created when data were loaded with out the check before.
And please check whether all your characteristic info object are of master data , I mean that in the infoobject defination you have checked the master data check box on the info object. If you have only text then it might fail the master data check.
hope this help.
cheers,
balaji
Message was edited by: Balaji NS

Dump ASSIGN_TYPE_CONFLICT when loading into Cube

Hi,
since an few weeks we have sometimes a problem when loading data from DSO to cube.
After transport a changed cube the first dataload into the cube dumps with ASSIGN_TYPE_CONFLICT.
We always activate all transformations and all DTPs which belong to the changed cube and also transport them.
When we repeat the dataload after the dump there is no problem and the data will be loaded successfully.
The dump appears on a very strange coding-place:
* FORM WRITE_DATA_CHAVL                                              *
* Kommentar: incoming data is based in characteritic values!        *
*              Transformation to Dimension Id's needs first to        *
*              translate the charateristic values into SID's          *
FORM write_data_chavl
USING
    i_r_data       TYPE REF TO data
    i_simulation   TYPE rs_bool
    i_trexaggr     TYPE rs_bool
    i_req_sid      TYPE rssid
    i_t_tabix      TYPE gt_t_tabix
    i_ncum_loadtp TYPE ncum_loadtype
    i_pkg_id       TYPE rssid
CHANGING
    c_subrc        TYPE i.
DATA:
    l_recno       LIKE sy-tabix,
    l_erridx      LIKE sy-tabix,
    l_nexterr     LIKE sy-tabix,
    l_errnumbers TYPE i,
    l_subrc1      LIKE sy-subrc,
    l_pdimid      TYPE rssid.
FIELD-SYMBOLS:
    <l_t_cubeval> TYPE g_t_cubecha,
    <l_s_cubecha> TYPE g_s_cubecha.
IF i_pkg_id <> 0.
*   bug, cube is not delta write enabled...
    cl_rsdd_cube_writer=>monitor_log(
      i_recno    = 0
      i_msgid    = 'DBMAN'
>>>      i_msgno    = '971'
      i_errtp    = ''
      i_errnm    = ''
      i_fieldnm = '' ).
    c_subrc = cl_rsdd_cube_writer=>nc_error-no_continue.
    RETURN.
ENDIF.
Does anyone else have this problem?
Or does anyone even have the solution?
I haven't found anything useful in SDN and SAP-Notes....
Christian

Hi Christian,
In that case check if this helps.....
1905680 - SP32: 'ASSIGN_TYPE_CONFLICT' in transformation during loading data using DTP
It says
SAP NetWeaver BW 7.31 (SAP NW BW 7.3 EnhP 1)
Import Support Package 10 for SAP NetWeaver BW 7.31 (SAPKW73110) into your BW system.
Regards

" Error when inserting in PSA table RSTSODSPART" when loading into PSA

Hello,
Did anyone encounter something similar, and found a solution ?
BI 7.0 - EnhP 1 - SP5
When loading data from R/3 into PSA, we encounter following error message:
" Error when inserting in PSA table RSTSODSPART"
===============================================================
- the first datapackage is written successfully to PSA,
but from the second datapackage onwards the error message pops-up
" Error when inserting in PSA table RSTSODSPART"
- The original dataselection in the infopackage is somewhere stored
If the selection in the InfoPackage is reduced (e.g. only one document i.o. a period)
it stil starts loading according the original selection (the month)
- If we create a new InfoPackage and select very few data (only one datapackage)
then we can load to PSA succesfully, but when we load to DSO we can't activate the DSO.
- We remarked that:
Two versions of the PSA exist for that datasource 0FI_GL_40:
a Table(/BIC/B0000555000) in version 1 exists,
a Table(/BIC/B0000555001) in version 2 exists
Thanks in advance,
Best regards

Hello All,
We had a problem similar to what Ilse Depoortere describes. The problem happens in our BW QA system a few days/weeks after it has been copied from Production. Data loads start failing with these two error messages:
RSM2 851 - Error when writing in PSA (Caller 32)
RSAR 130 - Error 7 when adding to PSA (Caller 70)
We have just implemented the fix described in note 1340371 (replaced the LIB_DBSL with patch level 247), and the problem is gone. Failed data load process chains can be restarted and finish successfully.
This has been a really useful discussion, thanks all! And thanks to my coworker Bob who found it.
Vince Vajda

Image will not load into item master

Is anyone aware of any specific issues that would prevent an image from loading into the Item Master. NOTE 952632 just suggests that the file is corrupt but it opens in several image editors so I am relatively convinced that it is not corrupt. It is also not a size issue in that I have larger images loading. It is occurring with a variety of images. I have hundreds that load just fine but some that do not. The permissions and location of all images, those that load and those that do not, are the same.

Editing and changing the name did not have any affect. Converting it to TIF or BMP enabled it to load. Seems odd that it works most of the time but not always. Unfortunate that we will have to have inconsistent image types and we use the same image for multiple purposes but for now, I will change those that don't load, strictly for the purpose of displaying them in SAP.
Thanks for your time Gordon

Weird Problem when importing Raw .CR2 Image sequences.

I am trying to import some CR2's image sequences into my AE CS5.5.
System specs:
OSX 10.7.4
Mid 2010 Mac Pro
2 x 2.66ghz 6-Core Intel Xeon
ATI Radeon HD 5770 1024MB
6gb Ram.
The images are 5616x3744. I also brought in a couple image sequences at 2784x1856, these were brought in fine. But the bigger (let's call them 5k files, even though they aren't technically 5k) images are almost being auto scaled down. See screenshot below.
This is what they look like when previewing from source clip, its as if they have been scaled down by 1/4. The info on the clip still reports that they are the full 5k resolution. Why could this be happening?

Could be an embedded preview JPEG/ TIFF instead of the actual RAW data. Verify the files in Photoshop or another program and suppress the preview image on import.
Mylenium

Raw CR2 Images Deleted when loading into Bridge.

Similar Messages

Maybe you are looking for