Raw device valiadation during dbca RAC installation
When i am trying to create Cluster DB by using dbca, i received
"Raw device validation check for control file /var/opt/oracle/oradata/orcl/Control01.ctl" failed stat for /var/opt/oracle/oradata/orcl/Control01.ctl file failed.
Any idea about this error........
My Env: oracle 9.2.0.4, RH 2.1AS, OCFS.
Thanks.
I followed metalink Doc ID:217319.1 Raw Device Validation Check When Using DBCA to Create a RAC Databae.
but no use.
Any idea why i am getting this error.
Thanks.
Similar Messages
-
Root.sh failing at node2 during 10g rac installation on vmware
Hi All,
I'm very new to Oracle RAC. I was trying to install 10gr2 rac on vmware. But while running root.sh script at node 2 I'm getting error like "Failure at check of Final Oracle Stack" . For the same I tried a lot to find the solution from this forum and also from other sources but did not get any proper solution. So any help from you experts is highly appreciable. Let me tell you how I'm getting this error.
1.Install vmware and RHEL 4 as guest OS.
2.Create a virtual machine as RAC1 and configured shared storage by adding 5 virtual disks(1-ocr,1-voting,3-asm)
3.Then clone RAC1 to a new virtual machine RAC2.
4.After binding and assigning permissions all raw devices(raw1,raw2,raw3,raw4,raw5) are available in both the virtual machines.
5. Then create user equivalence for both the system and each node is reach from other node also.
6. Now when I tried to install Oracle 10gr2 clusterware it got completed at RAC1 and I ran the required scripts but while running root.sh on RAC2 I got the above mentioned error.
I did OCR check at both the nodes and found both are different. Also the cssd.log gives error message like OCR mismatch.
Now here my question is as Firewal is disabled and all the configurations are proper though I'm getting the same error.
Can anyboy provide some suggestion on resolving this issue.
Thanks/dev/raw/raw1 /dev/sdb1
/dev/raw/raw2 /dev/sdc1
/dev/raw/raw3 /dev/sdd1
/dev/raw/raw4 /dev/sde1
/dev/raw/raw5 /dev/sdf1
The 1st one is for OCR and the next one is for Voting Disk and the rest are for asm. Also the permission are same across the two virtual machines.
root:oinstall /dev/raw/raw1
oracle:oinstall /dev/raw/raw2
oracle:oinstall /dev/raw/raw3
oracle:oinstall /dev/raw/raw4
oracle:oinstall /dev/raw/raw5
Thanks -
CRS-0213 error during 10g RAC installation
The two nodes are 2 Sun machines. The Oracle CRS installation went smoothly without incidents. I then kicked in the 10g DB RAC installation. At the end of the installation, I got error. I took a snapshot here:
http://bostonfx.com/temp/ora10g.gif
Any advise is much appreciated,
LucasHi Lucas -
This sounds simliar to Bug 3584146 PRKR-1008 adding instance to CRS via SRVCTL. The published workaround follows:
The workaround is to give permissions on the vip resources for all oracle users on the machine.
crs_setperm ora.<nodename>.vip -u user:<orauser1>:rwx
crs_setperm ora.<nodename>.vip -u user:<orauser2>:rwx
Repeat this for all oracle users on the system.
Hope this helps
-shawn -
Shared raw devices not discover during Oracle11g r2 RAC/Grid Installations
Dear Gurus
Our Platform: Redhat Linux Enterprise Editions5.3 64bit
We are installing Oracle11g r2 Grid(Clusterware+ASM) and want to use ASM for storage OCR,VOTING,DATA and FLASH Storage.
We are not want to use ASMLib.
plz find the shared raw partitions details
RAC Node-1
[root@xyz-ch-aaadb-01 ~]# fdisk -l
Disk /dev/sda: 145.9 GB, 145999527936 bytes
255 heads, 63 sectors/track, 17750 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 13 104391 83 Linux
/dev/sda2 14 6540 52428127+ 83 Linux
/dev/sda3 6541 11370 38796975 83 Linux
/dev/sda4 11371 17750 51247350 5 Extended
/dev/sda5 11371 17358 48098578+ 82 Linux swap / Solaris
/dev/sda6 17359 17750 3148708+ 83 Linux
Disk /dev/sdb: 3221 MB, 3221225472 bytes
100 heads, 62 sectors/track, 1014 cylinders
Units = cylinders of 6200 * 512 = 3174400 bytes
Device Boot Start End Blocks Id System
Disk /dev/sdc: 549.7 GB, 549755813888 bytes
255 heads, 63 sectors/track, 66837 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
Disk /dev/sdd: 549.7 GB, 549755813888 bytes
255 heads, 63 sectors/track, 66837 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdd1 1 66837 536868171 83 Linux
Disk /dev/sde: 549.7 GB, 549755813888 bytes
255 heads, 63 sectors/track, 66837 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sde1 1 66837 536868171 83 Linux
Disk /dev/sdf: 549.7 GB, 549755813888 bytes
255 heads, 63 sectors/track, 66837 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdf1 1 66837 536868171 83 Linux
Disk /dev/sdg: 3221 MB, 3221225472 bytes
100 heads, 62 sectors/track, 1014 cylinders
Units = cylinders of 6200 * 512 = 3174400 bytes
Device Boot Start End Blocks Id System
/dev/sdg1 1 1014 3143369 83 Linux
Disk /dev/sdh: 549.7 GB, 549755813888 bytes
255 heads, 63 sectors/track, 66837 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdh1 1 66837 536868171 83 Linux
RAC Node-2
[root@xyzl-ch-aaadb-02 ~]# fdisk -l
Disk /dev/sda: 145.9 GB, 145999527936 bytes
255 heads, 63 sectors/track, 17750 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 13 104391 83 Linux
/dev/sda2 14 6540 52428127+ 83 Linux
/dev/sda3 6541 11240 37752750 82 Linux swap / Solaris
/dev/sda4 11241 17750 52291575 5 Extended
/dev/sda5 11241 15940 37752718+ 83 Linux
/dev/sda6 15941 16332 3148708+ 83 Linux
Disk /dev/sdp: 3221 MB, 3221225472 bytes
100 heads, 62 sectors/track, 1014 cylinders
Units = cylinders of 6200 * 512 = 3174400 bytes
Device Boot Start End Blocks Id System
Disk /dev/sdq: 549.7 GB, 549755813888 bytes
255 heads, 63 sectors/track, 66837 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
Disk /dev/sdr: 549.7 GB, 549755813888 bytes
255 heads, 63 sectors/track, 66837 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdr1 1 66837 536868171 83 Linux
Disk /dev/sds: 549.7 GB, 549755813888 bytes
255 heads, 63 sectors/track, 66837 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sds1 1 66837 536868171 83 Linux
Disk /dev/sdt: 549.7 GB, 549755813888 bytes
255 heads, 63 sectors/track, 66837 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdt1 1 66837 536868171 83 Linux
Disk /dev/sdu: 3221 MB, 3221225472 bytes
100 heads, 62 sectors/track, 1014 cylinders
Units = cylinders of 6200 * 512 = 3174400 bytes
Device Boot Start End Blocks Id System
/dev/sdu1 1 1014 3143369 83 Linux
Disk /dev/sdv: 549.7 GB, 549755813888 bytes
255 heads, 63 sectors/track, 66837 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdv1 1 66837 536868171 83 Linux
Disk /dev/sdw: 3221 MB, 3221225472 bytes
100 heads, 62 sectors/track, 1014 cylinders
Units = cylinders of 6200 * 512 = 3174400 bytes
Device Boot Start End Blocks Id System
Disk /dev/sdx: 549.7 GB, 549755813888 bytes
255 heads, 63 sectors/track, 66837 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
Disk /dev/sdy: 549.7 GB, 549755813888 bytes
255 heads, 63 sectors/track, 66837 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdy1 1 66837 536868171 83 Linux
Disk /dev/sdz: 549.7 GB, 549755813888 bytes
255 heads, 63 sectors/track, 66837 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdz1 1 66837 536868171 83 Linux
Disk /dev/sdaa: 549.7 GB, 549755813888 bytes
255 heads, 63 sectors/track, 66837 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdaa1 1 66837 536868171 83 Linux
Disk /dev/sdab: 3221 MB, 3221225472 bytes
100 heads, 62 sectors/track, 1014 cylinders
Units = cylinders of 6200 * 512 = 3174400 bytes
Device Boot Start End Blocks Id System
/dev/sdab1 1 1014 3143369 83 Linux
Disk /dev/sdac: 549.7 GB, 549755813888 bytes
255 heads, 63 sectors/track, 66837 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdac1 1 66837 536868171 83 Linux
plz suggest the solutions.....
Edited by: hitgon on Aug 20, 2011 3:49 AM
Edited by: hitgon on Aug 20, 2011 3:50 AMwe are still not able to discover the shared raw device partitions,
plz help us......
now my fdisk -l shown the shown the consistent raw device partitions
plz find the details...........
[root@xyz-ch-aaadb-01 grid]# fdisk -l
Disk /dev/sda: 145.9 GB, 145999527936 bytes
255 heads, 63 sectors/track, 17750 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 13 104391 83 Linux
/dev/sda2 14 6540 52428127+ 83 Linux
/dev/sda3 6541 11370 38796975 83 Linux
/dev/sda4 11371 17750 51247350 5 Extended
/dev/sda5 11371 17358 48098578+ 82 Linux swap / Solaris
/dev/sda6 17359 17750 3148708+ 83 Linux
Disk /dev/sdb: 3221 MB, 3221225472 bytes
100 heads, 62 sectors/track, 1014 cylinders
Units = cylinders of 6200 * 512 = 3174400 bytes
Device Boot Start End Blocks Id System
Disk /dev/sdc: 549.7 GB, 549755813888 bytes
255 heads, 63 sectors/track, 66837 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
Disk /dev/sdd: 549.7 GB, 549755813888 bytes
255 heads, 63 sectors/track, 66837 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdd1 1 66837 536868171 83 Linux
Disk /dev/sde: 549.7 GB, 549755813888 bytes
255 heads, 63 sectors/track, 66837 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sde1 1 66837 536868171 83 Linux
Disk /dev/sdf: 549.7 GB, 549755813888 bytes
255 heads, 63 sectors/track, 66837 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdf1 1 66837 536868171 83 Linux
Disk /dev/sdg: 3221 MB, 3221225472 bytes
100 heads, 62 sectors/track, 1014 cylinders
Units = cylinders of 6200 * 512 = 3174400 bytes
Device Boot Start End Blocks Id System
/dev/sdg1 1 1014 3143369 83 Linux
Disk /dev/sdh: 549.7 GB, 549755813888 bytes
255 heads, 63 sectors/track, 66837 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdh1 1 66837 536868171 83 Linux
RAC Node-2
[root@xyz-ch-aaadb-02 ~]# fdisk -l
Disk /dev/sda: 145.9 GB, 145999527936 bytes
255 heads, 63 sectors/track, 17750 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 4700 37752718+ 83 Linux
/dev/sda2 4701 11227 52428127+ 83 Linux
/dev/sda3 11228 11619 3148740 83 Linux
/dev/sda4 11620 17750 49247257+ 5 Extended
/dev/sda5 11620 17750 49247226 83 Linux
Disk /dev/sdb: 3221 MB, 3221225472 bytes
100 heads, 62 sectors/track, 1014 cylinders
Units = cylinders of 6200 * 512 = 3174400 bytes
Device Boot Start End Blocks Id System
Disk /dev/sdc: 549.7 GB, 549755813888 bytes
255 heads, 63 sectors/track, 66837 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
Disk /dev/sdd: 549.7 GB, 549755813888 bytes
255 heads, 63 sectors/track, 66837 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdd1 1 66837 536868171 83 Linux
Disk /dev/sde: 549.7 GB, 549755813888 bytes
255 heads, 63 sectors/track, 66837 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sde1 1 66837 536868171 83 Linux
Disk /dev/sdf: 549.7 GB, 549755813888 bytes
255 heads, 63 sectors/track, 66837 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdf1 1 66837 536868171 83 Linux
Disk /dev/sdg: 3221 MB, 3221225472 bytes
100 heads, 62 sectors/track, 1014 cylinders
Units = cylinders of 6200 * 512 = 3174400 bytes
Device Boot Start End Blocks Id System
/dev/sdg1 1 1014 3143369 83 Linux
Disk /dev/sdh: 549.7 GB, 549755813888 bytes
255 heads, 63 sectors/track, 66837 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdh1 1 66837 536868171 83 Linux
find the following details.........
===============================================
RAC Node-1
[root@xyz-ch-xxxdb-01 grid]# ls -l /dev/sdb
brw-r----- 1 root disk 8, 16 Aug 19 09:15 /dev/sdb
[root@xyz-ch-xxxdb-01 grid]#
[root@xyz-ch-xxxdb-01 grid]# ls -l /dev/sdg
brw-r----- 1 root disk 8, 96 Aug 19 09:15 /dev/sdg
RAC Node-2
[root@xyz-ch-xxxdb-02 ~]# ls -l /dev/sdb
brw-r----- 1 root disk 8, 16 Aug 19 18:41 /dev/sdb
[root@xyz-ch-xxxdb-02 ~]#
[root@xyz-ch-xxxdb-02 ~]#
[root@xyz-ch-xxxdb-02 ~]# ls -l /dev/sdg
brw-r----- 1 root disk 8, 96 Aug 19 18:41 /dev/sdg
Edited by: hitgon on Aug 20, 2011 3:50 AM -
Oracle 9.2 RAC installation error on raw devices
During Oracle 9.2 RAC installation on Linux Red Hat 7.3 on raw devices
Database Configuration Assistant
returned the error message:
"Raw device validation check for Data File
"/dev/raw/clustdb_raw_cwmlite_100m" failed, No such file or directory".
Really this file exists, this is a link to a raw device.
How does Oracle validate the raw file?
What does this error mean?
Igor.During Oracle 9.2 RAC installation on Linux Red Hat 7.3 on raw devices
Database Configuration Assistant
returned the error message:
"Raw device validation check for Data File
"/dev/raw/clustdb_raw_cwmlite_100m" failed, No such file or directory".
Really this file exists, this is a link to a raw device.OK, so you are saying that /dev/raw/clustdb_raw_cwmlite_100m is link to /dev/raw/raw<x> (x some number)??
If not - there is your error.
How does Oracle validate the raw file?File MUST exists (or link) AND it must be a RAW device.
You can check it by raw -qa (it should display all raw devices, with theirs major-minor pairs)
What does this error mean?
Igor. Hrvoje -
Hello,
I am getting the following error when I try to complete approval process.
ORA-20001: Unable to create tablespace. ORA-01
119: error in creating database file '//./FLOW_1.dbf' ORA-27040: skgfrcre: creat
e error, unable to create file OSD-04002: unable to open file O/S-Error: (OS 2)
The system cannot find the file specified.
I checked the alert log for error here is the error in the alert log file.
ORA-1119 signalled during: CREATE TABLESPACE FLOW_1 DATAFILE '//./FLOW_1.dbf'..
and i found the syntax for create tablespace was wrong.
To create a tablespace in RAC with RAW device environment under windows.
it should have forward black slash instead of backward slash "/" without .dbf extension.
so, I changed the syntax i was able to create tablespace through sqlplus.
When APEX tool try to create this tablespace it throws this error..
Old: CREATE TABLESPACE FLOW_1 DATAFILE
'\\.\FLOW_1.dbf' SIZE 10304 K REUSE AUTOEXTEND OFF
EXTENT MANAGEMENT LOCAL AUTOALLOCATE SEGMENT SPACE MANAGEMENT AUTO
error : ORA-01119: error in creating database file '\\.\FLOW_1.dbf'
New:
CREATE TABLESPACE FLOW_1 DATAFILE
'\\.\FLOW_1' SIZE 10304 K REUSE AUTOEXTEND OFF
EXTENT MANAGEMENT LOCAL AUTOALLOCATE SEGMENT SPACE MANAGEMENT AUTO
Tablespace created.
Is it a bug in APEX 3.0.1.??
Is anyone installed APEX in RAC ??
JamesHi,
One observation, Apex is switching the Session ID after one got killed ? I was working on Apex page with browse Item to test open cursor count,
after killing the SID (227) on which the open cursor count was getting increase, it APEX automatically switches to new SID(149) for that session.
Now the problem is even if I have two SID's and one hits the maximum open cursor count, It is not switching to other SID instead the whole application becomes unavailable.
STATNAME SID VALUE USER
opened cursors current 20 14 APEX_PUBLIC_USER
opened cursors current 149 74 APEX_PUBLIC_USER
opened cursors current 194 71 APEX_PUBLIC_USER
opened cursors current 211 5 APEX_PUBLIC_USER
opened cursors current 227 325 APEX_PUBLIC_USER Killed
opened cursors current 244 15 APEX_PUBLIC_USER
opened cursors current 20 14 APEX_PUBLIC_USER
opened cursors current 149 76 APEX_PUBLIC_USER
opened cursors current 194 71 APEX_PUBLIC_USER
opened cursors current 211 5 APEX_PUBLIC_USER
opened cursors current 244 15 APEX_PUBLIC_USER
Please kindly help in this.
Thanks in Advance
Thanks & Regards
Sanjay
Edited by: user11204334 on Dec 8, 2010 1:02 AM -
Dear all,
I am having a big issue when installing oracle RAC on windows 2003 service pack 1. during oracle cluster configuration assistants step an error takes place and the installation terminate
the following is the complete log file data.
Using paramFile: E:\10201_clusterware_win32\clusterware\install\oraparam.ini
No pre-requisite checks found in oraparam.ini, no system pre-requisite checks will be executed.
The commandline for unzip:
E:\10201_clusterware_win32\clusterware\install\unzip -qqq ../stage/Components/oracle.swd.jre/1.4.2.8.0/1/DataFiles/"*.jar" -d "C:\temp\OraInstall2009-02-02_06-13-03PM"
The commandline for unzip:
E:\10201_clusterware_win32\clusterware\install\unzip -qqq ..\stage\Components\oracle.swd.oui\10.2.0.1.0\1\DataFiles\/"*.jar" -d "C:\temp\OraInstall2009-02-02_06-13-03PM"
The commandline for unzip:
E:\10201_clusterware_win32\clusterware\install\unzip -qqq ..\stage\Components\oracle.swd.oui.core\10.2.0.1.0\1\DataFiles\/"*.jar" -d "C:\temp\OraInstall2009-02-02_06-13-03PM"
The number of files bootstrapped for the jre is 584.
The number of files bootstrapped for the oui is 100.INFO: Environment Variables:
INFO: ORACLE_HOME =
INFO: PATH = C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem
INFO: CLASSPATH =
INFO: Username:oracle
INFO: Oracle Universal Installer version is 10.2.0.1.0
INFO: Setting variable 'PREREQ_CONFIG_LOCATION' to ''. Received the value from variable association.
INFO: Reader/Writer 'oracle.sysman.oii.oiic.OiicGlobalContextXMLReaderWriter' was created.
INFO:
*** Welcome Page***
INFO: Initializing install inventory
INFO: Setting up install inventory
INFO:
*** Specify Source Location Page***
INFO: Initializing OUI Shiphome access setup
INFO: DefaultifyLangiages : Value of oracle.installer.defaultifyLanguages : false
INFO: fetch the file: E:\10201_clusterware_win32\clusterware\stage/shiphomeinfo.properties
INFO: Performing operation for OUI Shiphome access setup
INFO:
*** Select a Product to Install Page***
INFO: Setting the 'TopLevelComp ( ToplevelComp )' property to 'oracle.crs, 10.2.0.1.0, >0.0.0.0.0, [ 912 ][OH:1]'. Received the value from the default settings.
INFO:
*** Select Installation Type Page***
INFO: Setting the 'InstallType ( DEP_MODE )' property to 'Complete'. Received the value from the default settings.
INFO: Setting the 'TopLevelInstallType ( TLDepModes )' property to 'Complete'. Received the value from the default settings.
INFO: The selected install type is "Complete".
INFO: install properties filename: C:\temp\OraInstall2009-02-02_06-13-03PM/oracle.crs_Complete.properties
INFO:
*** Specify Home Details Page***
INFO: Setting the 'OracleHome ( ORACLE_HOME )' property to 'E:\oracle\product\10.2.0\crs'. Received the value from the UI page.
INFO: Setting the 'OracleHomeName ( ORACLE_HOME_NAME )' property to 'OraCr10g_home'. Received the value from the UI page.
INFO: Initializing OUI Oracle Home access setup
INFO: Setting variable 'ORACLE_HOME' to 'E:\oracle\product\10.2.0\crs'. Received the value from the UI page.
INFO: Loading shiphomepropertiesfrom C:\temp\OraInstall2009-02-02_06-13-03PM/shiphomeproperties.xml
INFO: DefaultifyLangiages : Value of oracle.installer.defaultifyLanguages : false
INFO: Setting the PROD_HOME variable of 'oracle.crs_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs/oracle_crs'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.has.cfs_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs/oracle_crs_wincfs'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.has.crs_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs/oracle.has.crs'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.swd.oui_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs\oui'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.swd.oui.core_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs\oui'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.swd.opatch_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs\OPatch'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.swd.jre_1.4.2.8.0' to 'E:\oracle\product\10.2.0\crs\jre\1.4.2'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.bali.ewt_3.4.38.0.0' to 'E:\oracle\product\10.2.0\crs/ewt'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.bali.help_4.2.6.1.0' to 'E:\oracle\product\10.2.0\crs/help'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.bali.jewt_4.2.33.0.0' to 'E:\oracle\product\10.2.0\crs/jewt'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.bali.share_1.1.18.0.0' to 'E:\oracle\product\10.2.0\crs/oracle_tools_share'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.bali.ice_5.2.3.6.0' to 'E:\oracle\product\10.2.0\crs/ice'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.oem.oemlt_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs/oemlt'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.buildtools.common_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs/oracle_buildtools_common'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.buildtools.rsf_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs/oracle_buildtools_rsf'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.dbjava.rsf_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs/oracle.dbjava.rsf'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.emdw.rsf_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs/oracle.emdw.rsf'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.has.common_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs/oracle_prod'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.has.rsf_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs/oracle_rsf_has_rsf'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.ldap.rsf_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs/oracle_ldap_rsf_cmp'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.network.rsf_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs/oracle.network.rsf'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.network.rsf.ic_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs/oracle.network.rsf.ic'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.nlsrtl.rsf_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs/oracle_nlsrtl_rsf'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.nlsrtl.rsf.lbuilder_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs/oracle_nlsrtl_rsf_lbuilder'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.ons_10.1.0.3.0' to 'E:\oracle\product\10.2.0\crs/opmn'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.oracore.rsf_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs/oracle.oracore.rsf'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.perlint_5.8.3.0.2' to 'E:\oracle\product\10.2.0\crs\perl'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.precomp.rsf_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs/oracle_rsf_precomp_rsf'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.rdbms.crs_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs/oracle_prod'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.rdbms.rsf_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs/oracle.rdbms.rsf'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.rdbms.rsf.ic_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs/oracle.rdbms.ic'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.rsf_10.2.0.1.0' to ''. Received the value from the variable calculation.
INFO: oracle.rsf Product Location: Empty path specified.*** Specify Local Host Name Page***
INFO: Setting the 'HostName ( ORACLE_HOSTNAME )' property to 'racdbsrv1.bog.gov.sa'. Received the value from the default settings.
INFO: Defaulting prerequisite location to 'E:\10201_clusterware_win32\clusterware\stage/prereq'.
INFO:
*** Product-Specific Prerequisite Checks Page***
INFO: Entry point:oracle.crs_Complete_install
INFO: Starting Prerequisite checks : Mon Feb 02 18:13:28 AST 2009
INFO: Checking CertifiedVersions
This is a prerequisite condition to test whether the Oracle software is certified on the current O/S.
INFO: Expected result: One of 5.0,5.2
Actual Result: 5.2
Check complete. The overall result of this check is: Passed
INFO: --------------------------------------------------------------------------------
INFO: Checking ServicePackChecks
This is a prerequisite condition to test whether the Service Pack level recommended for installing the product is available on the system.
INFO: Check complete. The overall result of this check is: Passed
INFO: --------------------------------------------------------------------------------
INFO: Checking TotalMemory
This is a prerequisite condition to test whether the system has sufficient physical memory.
INFO: Expected result: 256MB
Actual Result: 2047MB
Check complete. The overall result of this check is: Passed
INFO: --------------------------------------------------------------------------------
INFO: Checking CompatibilityChecks
This is a prerequisite condition to check whether the Oracle Home specified by the user already contains an installed product which is incompatible with the product being installed.
INFO: Actual Result: NEW_HOME
Check complete. The overall result of this check is: Passed
INFO: --------------------------------------------------------------------------------
INFO: Checking OracleHomeSpace
This is a prerequisite condition to check whether the specified Oracle Home contains any spaces in the path.
INFO: Check complete. The overall result of this check is: Passed
INFO: --------------------------------------------------------------------------------
INFO: Checking InstallOnRoot
This is a prerequisite condition to test whether installation is done at the root of a drive.
INFO: Checking the ORACLE HOME.... :E:\oracle\product\10.2.0\crs
INFO: Check complete. The overall result of this check is: Passed
INFO: --------------------------------------------------------------------------------
INFO: Checking Detectnverify92RAC
This is a prerequisite condition to check whether all the selected nodes are part of the existing Oracle 9.2 RAC.
INFO: hostNameFromIpAddr :racdbsrv1.bog.gov.sa
INFO: hostName :racdbsrv1
INFO: Identifying windows system directory :C:\WINDOWS\system32
INFO: is92Cluster State:false
INFO: Check complete. The overall result of this check is: Passed
INFO: --------------------------------------------------------------------------------
INFO: Checking Detectnverfiy10iSI
This is a prerequisite condition to check if local CSS is shutdown and deconfigured on all the nodes of the cluster.
INFO: hostNameFromIpAddr :racdbsrv1.bog.gov.sa
INFO: hostName :racdbsrv1
INFO: is92Cluster state :false
INFO: Reg Key exists status:false
INFO: Check complete. The overall result of this check is: Passed
INFO: --------------------------------------------------------------------------------
INFO: Checking ExistingEnvChecks
This is a prerequisite condition to ensure that ORACLE_HOME, ORACLE_SID, ORACLE_CRS_HOME variables are not set in the environment.
INFO: Checking Oracle home from the env... :
INFO: Checking Oracle Sid from the env...:
INFO: Checking Oracle CRS home in the env.... :
INFO: Check complete. The overall result of this check is: Passed
INFO: --------------------------------------------------------------------------------
INFO: Prerequisite checks completed : Mon Feb 02 18:13:29 AST 2009
INFO: *** Entering Component: oracle.crs installation
INFO: Setting variable 'sl_votedrivelist' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_vipHosts' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_tableListClone' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_selectedNodes' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_publicNodeNames' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_pubNodes' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_privatenamelist' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_privateNodeNames' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_nodenumberlist' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_hostnames' to ''. Received the value from the variable calculation.
INFO: Calling Query ClusterQueries10.2.0.1.0 PrivIntr
INFO: Query Returned: public 10.10.10.0 PRIVATE 255.255.255.0,Local Area Connection 5 169.254.0.0 UNKNOWN 255.255.0.0,priv1 192.168.0.0 PRIVATE 255.255.255.0,Local Area Connection 4 169.254.0.0 UNKNOWN 255.255.0.0,priv2 192.168.0.0 PRIVATE 255.255.255.0,Local Area Connection 2 169.254.0.0 UNKNOWN 255.255.0.0
INFO: Setting variable 'sl_defaultPrivIntrList' to 'public:10.10.10.0:2:255.255.255.0,Local Area Connection 5:169.254.0.0:1:255.255.0.0,priv1:192.168.0.0:2:255.255.255.0,Local Area Connection 4:169.254.0.0:1:255.255.0.0,priv2:192.168.0.0:2:255.255.255.0,Local Area Connection 2:169.254.0.0:1:255.255.0.0'. Received the value from the variable calculation.
INFO: Setting variable 'sl_VDSKPartitionsOnRAW' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_VDSKDisksOnRAW' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_PrivIntrColHeaders' to 'Interface Name,Subnet,Interface Type'. Received the value from the variable calculation.
INFO: Setting variable 'sl_PartitionNumberOH' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_PartitionNumberDF' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_PartitionAndSpaceVDSK' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_PartitionAndSpaceSelectedVDSK' to ',0,0,20'. Received the value from the variable calculation.
INFO: Setting variable 'sl_PartitionAndSpaceSelectedOCR' to ',0,0,100'. Received the value from the variable calculation.
INFO: Setting variable 'sl_PartitionAndSpaceOCR' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_OHPartitionsAndSpace' to 'NO_VAL'. Received the value from the variable calculation.
INFO: Setting variable 'sl_OHPartitionAndSpaceSelected' to ',0,0,3072'. Received the value from the variable calculation.
INFO: Setting variable 'sl_OHDrives' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_OHDriveSelected' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_IntrNames' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_IntrChoices' to 'Public,Private,Do Not Use'. Received the value from the variable calculation.
INFO: Setting variable 'sl_HostList' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_Drives' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_DiskNumberOH' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_DiskNumberDF' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_DFPartitionsAndSpace' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_DFPartitionAndSpaceSelected' to ',0,0,3072'. Received the value from the variable calculation.
INFO: Setting variable 'sl_DFDrives' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_DFDriveSelected' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_ConfigTypes' to 'Oracle Home and Datafiles,Select this configuration if your shared drives has enough space for Oracle software and database datafiles. Choosing this option will place the Oracle Cluster Registry (OCR) and the Cluster Synchronization Services (CSS) voting disk on the same drive as the datafiles.,Oracle Home ONLY,Select this configuration if your shared drive has only enough space for your Oracle software. You will be asked to specify two raw devices later, one for the Oracle Cluster Registry (OCR) and the Cluster Synchronization Services (CSS) voting disk.,Datafiles ONLY,Select this configuration if you want multiple copies of your Oracle software, one per instance.,Neither,Select this configuration if your non-shared drive has only enough space for your Oracle Clusterware software.
You will be asked to specify two raw devices later, one for the Oracle Cluster Registry (OCR) and the Cluster Synchronization Services (CSS) voting disk.'. Received the value from the variable calculation.
INFO: Setting variable 'sl_92NodeNos' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_92NodeList' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_votedsk' to 'votedsk'. Received the value from the variable calculation.
INFO: Setting variable 's_votedisklist' to ''. Received the value from the variable calculation.
INFO: Calling Query globalVarQueries2.1.0.4.1 getGlobalVariable
variable = oracle.installer.NatLibDir
INFO: Query Returned: C:\temp\OraInstall2009-02-02_06-13-03PM\
INFO: Setting variable 's_tmpDirLocation' to 'C:\temp\OraInstall2009-02-02_06-13-03PM\'. Received the value from the variable calculation.
INFO: Setting variable 's_svrConfigLocFileName' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_storageTypeVdsk' to 'NO_VAL'. Received the value from the variable calculation.
INFO: Setting variable 's_storageTypeOcr' to 'NO_VAL'. Received the value from the variable calculation.
INFO: Setting variable 's_srvconfig_loc' to 'srvconfig_loc'. Received the value from the variable calculation.
INFO: Setting variable 's_srvcfgMirr' to 'ocrmirrorcfg'. Received the value from the variable calculation.
INFO: Setting variable 's_srvcfg' to 'ocrcfg'. Received the value from the variable calculation.
INFO: Calling Query globalVarQueries2.1.0.4.1 getGlobalVariable
variable = oracle.installer.silent
INFO: Query Returned: false
INFO: Setting variable 's_silent' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 's_setif' to 'setif -global '. Received the value from the variable calculation.
INFO: Setting variable 's_script3' to 'rootdeinstall.sh'. Received the value from the variable calculation.
INFO: Setting variable 's_script2' to 'rootdelete.sh'. Received the value from the variable calculation.
INFO: Setting variable 's_script1' to 'rootdeletenode.sh'. Received the value from the variable calculation.
INFO: Setting variable 's_responseFile' to 'default'. Received the value from the variable calculation.
INFO: Setting variable 's_rawDeviceName' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_quorum' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_pubNodeNum' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_path' to ''. Received the value from the variable calculation.
INFO: Calling Query generalQueries10.1.0.3.0 getOSName
INFO: Query Returned: NT_X86
INFO: Setting variable 's_operatingSystem' to 'NT_X86'. Received the value from the variable calculation.
INFO: Setting variable 's_onsnodelist' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_ocrLocFileName' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_nodevips' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_nodelist' to ''. Received the value from the variable calculation.
INFO: Calling Query LangQueries1.3.6.4 GetNlsLang
INFO: Query Returned: AMERICAN_AMERICA.WE8MSWIN1252
INFO: Setting variable 's_languageid' to ''AMERICAN_AMERICA.WE8MSWIN1252''. Received the value from the variable calculation.
INFO: Calling Query areasQueries10.2.0.1.0 getProductHome
name = oracle.jdk
startVersion = 1.4.1
endVersion = 9.9.9
acceptCompatible = null
INFO: Query Returned: E:\oracle\product\10.2.0\crs\jdk
INFO: Setting variable 's_jreLocation' to 'E:\oracle\product\10.2.0\crs\jdk\jre\'. Received the value from the variable calculation.
INFO: Setting variable 's_hostnamelist' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_finalIntrList' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_endOfInstallMesg' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_dirPermissions' to '775'. Received the value from the variable calculation.
INFO: Setting variable 's_cvuNodelist' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_clustername' to 'crs'. Received the value from the variable calculation.
INFO: Setting variable 's_clusterNodes' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_allocationUnitOH' to '4'. Received the value from the variable calculation.
INFO: Setting variable 's_allocationUnitDF' to '1024'. Received the value from the variable calculation.
INFO: Setting variable 's_addFlag' to 'add_config'. Received the value from the variable calculation.
INFO: Setting variable 's_VdskMirrorNotReqd' to 'NO_VAL'. Received the value from the variable calculation.
INFO: Setting variable 's_PartitionNumberVDSK' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_PartitionNumberOH' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_PartitionNumberOCRMirr' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_PartitionNumberOCR' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_PartitionNumberDF' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_OHDriveSelected' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_OCRdeviceList' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_JavaFlag' to '-Dsun.java2d.noddraw=true'. Received the value from the variable calculation.
INFO: Setting variable 's_IntrIps' to 'NO_VAL'. Received the value from the variable calculation.
INFO: Setting variable 's_InstCrsVer' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_DiskNumberVDSK' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_DiskNumberOH' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_DiskNumberOCRMirr' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_DiskNumberOCR' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_DiskNumberDF' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_DFMirrorDriveSelected' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_DFDriveSelected' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_CfsOcrRoot' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_CfgTypeRet' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_CSS' to 'OracleClusterPreinstService'. Received the value from the variable calculation.
INFO: Setting variable 's_92CFSLocation' to ''. Received the value from the variable calculation.
INFO: Setting variable 'ret_PrivIntrList' to 'NO_VALUE'. Received the value from the variable calculation.
INFO: Setting variable 'n_storageTypeVDSK' to '1'. Received the value from the variable calculation.
INFO: Setting variable 'n_storageTypeOCR' to '1'. Received the value from the variable calculation.
INFO: Setting variable 'n_NTvdskCounter' to '0'. Received the value from the variable calculation.
INFO: Setting variable 'n_Choice' to '0'. Received the value from the variable calculation.
INFO: Setting variable 'b_win92' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'b_votingdiskfirsttime' to 'true'. Received the value from the variable calculation.
INFO: Setting variable 'b_validateOnce' to 'true'. Received the value from the variable calculation.
INFO: Setting variable 'b_removedClusterPreinstService' to 'true'. Received the value from the variable calculation.
INFO: Setting variable 'b_ocrpartitionfirsttime' to 'true'. Received the value from the variable calculation.
INFO: Setting variable 'b_launchConfig' to 'true'. Received the value from the variable calculation.
INFO: Calling Query generalQueries10.1.0.3.0 isCurrentPlatformInGroup
platGroup = WINDOWS
INFO: Query Returned: true
INFO: Setting variable 'b_isWindows' to 'true'. Received the value from the variable calculation.
INFO: Setting variable 'b_isVdskRAW' to 'false'. Received the value from the variable calculation.
INFO: Calling Query generalQueries10.1.0.3.0 isCurrentPlatformInGroup
platGroup = UNIX
INFO: Query Returned: false
INFO: Setting variable 'b_isUNIX' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'b_isOCRPrimaryOnRAW' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'b_isOCRMirrorOnRAW' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'b_isNonCFS' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'b_isCluster' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'b_isCFS' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'b_flag' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'b_firsttime' to 'true'. Received the value from the variable calculation.
INFO: Setting variable 'b_emptyFlag' to 'true'. Received the value from the variable calculation.
INFO: Setting variable 'b_displayWinStorageDlg' to 'true'. Received the value from the variable calculation.
INFO: Setting variable 'b_WinDeinst' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'b_VipListFirstTime' to 'true'. Received the value from the variable calculation.
INFO: Setting variable 'b_VdskRAW' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'b_VdskCFS' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'b_Use92Cfs' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'b_StartedClusterPreinstService' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'b_StartClusterServiceFirstTime' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'b_StartClusterPreinstService_retval' to 'true'. Received the value from the variable calculation.
INFO: Setting variable 'b_ServiceRunning' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'b_ServiceFound' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'b_PrivNameListFirstTime' to 'true'. Received the value from the variable calculation.
INFO: Setting variable 'b_OhOnlyOnCFS' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'b_OcrRaw' to 'false'. Received the value from the variable calculation.
INFO: Calling Query fileQueries10.1.0.2.0 exists
filename = /var/opt/oracle/srvConfig.loc
INFO: Query Returned: false
INFO: Setting variable 'b_DisplayOcrDialog' to 'true'. Received the value from the variable calculation.
INFO: Setting variable 'b_DebugFlag' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'b_CssStillRunning' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'b_CssAlreadyStopped' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'bRAC9_2_exists' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'bRAC10i_exists' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'CLUSTER_CONFIGURATION_FILE' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_OHPartitionsAndSpace_valueFromDlg' to 'NO_VAL'. Received the value from the variable calculation.
INFO: Calling Query WindowsGeneralQueries10.2.0.0.0 getWindowsSystemDirectory
INFO: Query Returned: C:\WINDOWS\system32
INFO: Setting variable 's_windowsSystemDirectory' to 'C:\WINDOWS\system32'. Received the value from the variable calculation.
INFO: Setting variable 's_usergroup' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_policyFile' to '-Djava.security.policy="E:\oracle\product\10.2.0\crs\srvm\admin\srvm.policy"'. Received the value from the variable calculation.
INFO: Setting variable 's_orahomeSwitch' to '-orahomeE:\oracle\product\10.2.0\crs'. Received the value from the variable calculation.
INFO: Setting variable 's_jreBin' to 'E:\oracle\product\10.2.0\crs\jdk\jre\\bin'. Received the value from the variable calculation.
INFO: Setting variable 's_hostname' to 'racdbsrv1.bog.gov.sa'. Received the value from the variable calculation.
INFO: Setting variable 's_WinDeinst' to 'del -nn '. Received the value from the variable calculation.
INFO: Calling Query areasQueries10.2.0.1.0 productInstalled
location = E:\oracle\product\10.2.0\crs
name = oracle.crs
startVersion = 10.1.0.0.0
endVersion = 99.9.9.9.9
acceptCompatible = false
INFO: Query Returned: false
INFO: Setting variable 'b_isUpgrade' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'b_isShared' to 'true'. Received the value from the variable calculation.
INFO: Setting variable 'b_isLinux' to 'false'. Received the value from the variable calculation.
INFO: Calling Query netQueries10.2.0.1.0 getHostIPAddress
INFO: Query Returned: 10.10.10.31
INFO: Calling Query netQueries10.2.0.1.0 getHostNameForIPAddress
ipAddress = 10.10.10.31
INFO: Query Returned: racdbsrv1.bog.gov.sa
INFO: Calling Query netQueries10.2.0.1.0 getMachineName
hostName = racdbsrv1.bog.gov.sa
INFO: Query Returned: racdbsrv1
INFO: Calling Query ClusterQueries10.2.0.1.0 getClusterState
nodeName = racdbsrv1
INFO: Query Returned: 0
INFO: Setting variable 'b_CoExist' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'OwnerId' to 'Administrator'. Received the value from the variable calculation.
INFO: Setting variable 'ORA_CRS_HOME' to 'E:\oracle\product\10.2.0\crs'. Received the value from the variable calculation.
INFO: Setting variable 's_windowsCommandLine' to 'C:\WINDOWS\system32\cmd /c call '. Received the value from the variable calculation.
INFO: Setting variable 's_vipcaClasspath' to '";E:\oracle\product\10.2.0\crs\jlib\srvm.jar;E:\oracle\product\10.2.0\crs\jlib\srvmhas.jar;E:\oracle\product\10.2.0\crs\srvm\jlib\vipca.jar;E:\oracle\product\10.2.0\crs\jlib\ewt3.jar;E:\oracle\product\10.2.0\crs\jlib\jewt4.jar;E:\oracle\product\10.2.0\crs\jlib\share.jar;E:\oracle\product\10.2.0\crs\jlib\oracle_ice.jar;E:\oracle\product\10.2.0\crs\jlib\oemlt-10_1_0.jar"'. Received the value from the variable calculation.
INFO: Calling Query generalQueries10.1.0.3.0 getenv
name = TMPDIR
INFO: Query Returned:
INFO: Calling Query generalQueries10.1.0.3.0 getenv
name = TEMPDIR
INFO: Query Returned:
INFO: Calling Query generalQueries10.1.0.3.0 getenv
name = TEMP
INFO: Query Returned: C:\temp
INFO: Setting variable 's_tmpDir' to 'C:\temp'. Received the value from the variable calculation.
INFO: Setting variable 's_cvuClassPath' to '"E:\oracle\product\10.2.0\crs\jlib\srvm.jar;E:\oracle\product\10.2.0\crs\jlib\cvu.jar;E:\oracle\product\10.2.0\crs\jdk\jre\lib\rt.jar"'. Received the value from the variable calculation.
INFO: Setting variable 'b_launchVIPCA' to 'true'. Received the value from the variable calculation.
INFO: Calling Query ClusterQueries10.2.0.1.0 IsItVendor
INFO: Query Returned: false
INFO: Setting variable 'b_isVendor' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'sl_tableList' to 'NULL'. Received the value from the variable calculation.
INFO: Calling Query netQueries10.2.0.1.0 getDomainName
hostName =
INFO: Query Returned:
INFO: Calling Query netQueries10.2.0.1.0 getIPAddressForHostName
hostName =
INFO: Query Returned: 127.0.0.1
INFO: Calling Query netQueries10.2.0.1.0 getHostNameForIPAddress
ipAddress = 127.0.0.1
INFO:
Query Exception: UnknownHostException
Query Exception Class: class oracle.sysman.oii.oiil.OiilQueryException
INFO: Error getting hostname for the given IP address.
INFO: Calling Query netQueries10.2.0.1.0 getDomainName
hostName = Error getting hostname for the given IP address.
INFO: Query Returned:
INFO: Setting variable 'sl_nodeNames' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_OcrVdskMirror1RetVal' to 'NO_VAL'. Received the value from the variable calculation.
INFO: Calling Query netQueries10.2.0.1.0 getMachineName
hostName = racdbsrv1.bog.gov.sa
INFO: Query Returned: racdbsrv1
INFO: Setting variable 's_ocrpartitionlocation' to 'NO_VAL'. Received the value from the variable calculation.
INFO: Calling Query netQueries10.2.0.1.0 getMachineName
hostName = racdbsrv1.bog.gov.sa
INFO: Query Returned: racdbsrv1
INFO: Setting variable 's_ocrMirrorLocation' to 'NO_VAL'. Received the value from the variable calculation.
INFO: Calling Query netQueries10.2.0.1.0 getMachineName
hostName = racdbsrv1.bog.gov.sa
INFO: Query Returned: racdbsrv1
INFO: Setting variable 's_votingdisklocation' to 'NO_VAL'. Received the value from the variable calculation.
INFO: Calling Query netQueries10.2.0.1.0 getMachineName
hostName = racdbsrv1.bog.gov.sa
INFO: Query Returned: racdbsrv1
INFO: Setting variable 's_VdskMirror2RetVal' to 'NO_VAL'. Received the value from the variable calculation.
INFO: Calling Query netQueries10.2.0.1.0 getMachineName
hostName = racdbsrv1.bog.gov.sa
INFO: Query Returned: racdbsrv1
INFO: Calling Query netQueries10.2.0.1.0 getMachineName
hostName = racdbsrv1.bog.gov.sa
INFO: Query Returned: racdbsrv1
INFO: Calling Query ClusterQueries10.2.0.1.0 getClusterState
nodeName = racdbsrv1
INFO: Query Returned: 0
INFO: Setting variable 'sl_HostList' to 'racdbsrv1.bog.gov.sa'. Received the value from a code block.
INFO: Calling Query netQueries10.2.0.1.0 getDomainName
hostName = racdbsrv1.bog.gov.sa
INFO: Query Returned: bog.gov.sa
INFO: Calling Query netQueries10.2.0.1.0 getMachineName
hostName = racdbsrv1.bog.gov.sa
INFO: Query Returned: racdbsrv1
INFO: Calling Query netQueries10.2.0.1.0 getDomainName
hostName = racdbsrv1.bog.gov.sa
INFO: Query Returned: bog.gov.sa
INFO: Calling Query ClusterQueries10.2.0.1.0 PrivNodeName
nodeName = racdbsrv1.bog.gov.sa
PathName = E:\oracle\product\10.2.0\crs
INFO: Query Returned:
INFO: Setting variable 'sl_HostList' to 'racdbsrv1.bog.gov.sa,racdbsrv1-priv.bog.gov.sa'. Received the value from a code block.
INFO: Calling Query netQueries10.2.0.1.0 getDomainName
hostName = racdbsrv1.bog.gov.sa
INFO: Query Returned: bog.gov.sa
INFO: Calling Query netQueries10.2.0.1.0 getMachineName
hostName = racdbsrv1.bog.gov.sa
INFO: Query Returned: racdbsrv1
INFO: Calling Query netQueries10.2.0.1.0 getDomainName
hostName = racdbsrv1.bog.gov.sa
INFO: Query Returned: bog.gov.sa
INFO: Setting variable 'sl_HostList' to 'racdbsrv1.bog.gov.sa,racdbsrv1-priv.bog.gov.sa,racdbsrv1-vip.bog.gov.sa'. Received the value from a code block.
INFO: Calling Query ClusterQueries10.2.0.1.0 getCssInfo -
10.1.0.3 on RH4(Centos) + Raw devices + ASM + RAC
Hi,
I'm just wondering if anyone here tried installing a single node RAC on 2 instance using ASM on Oracle 10g (10.1.0.3)?
I am using RH4(CENTOS 4.1), Oracle 10.1.0.3 + CRS 10.1.0.3 on fake raw devices in Linux.
I have been able to install the CRS and Oracle database software successfully.
All CRS services and listener are up and running.
crs_stat command return successful results.
srvctl status nodeapps -n <node_name> also returns successful results.
However, when I attempt to startup the ASM instance, I keep encountering these errors:
ORA-00603:ORACLE server session terminated by fatal error
ORA-27504:IPC error creating OSD context
The ORA-00603 error message will appear immediately in the SQLPLUS prompt when I try to startup ASM instance.
Both errors will be logged in alert.log and trace files, no other useful error messages besides these errors.
When I attempt to create a normal database instance using datafiles on the same machine, these errors also appear again!
So, I figure its got nothing to do with the raw devices since my OCR location and Voting devices are using the same raw devices on Linux.
Anyone did the same thing like me and faced similar problems.... please help.
CheersYou can use dbca to create ASM instance to get rid of the manual copy business.
In realease 1, you can invoke dbca, choose database instance and walk through still you reach storage clause and choose asm and DBA will create ASM instance on both nodes.
Ensure that you choose cluster install option and all the nodes at the initial stages. -
Reinstall DB and ASM using existing RAW devices in RAC
Hi,
We have two Database servers in Cluster environment DB1 and DB2 using CX300(SAN) as Storage device.Recently we had upgraded the OS kernel on DB1 from RHEL 3 to RHEL 4 and DB2 is still running on RHEL 3. Due to some application problems we wanted the DB1 to be rollbacked to RHEL 3
DB1-has ASM1 instance and DB2 has ASM2 instance running.Similary SID1 and SID2 on both of them.
Since we want to roll back to RHEL 3 it is a clean install on DB1. So my problem is I had never done this kind of reinstallation of DB and ASM using existing raw devices.
Can Someone sent me out some instructions and steps on how to do the reinstall without disturbing RAC,DB2 and Data on RAW/CX300(SAN) device.
I am basically a system admin not a complete Oracle DBA.I will be grateful for your help.
Thanks,
ShivaIt means, before proceeding a proper database backup must be taken, then it has to be started from scratch. RHEL3 is certified with 10gR1 and 10gR2, you should be aware of the patchsets available for the oracle version.
I suggest you to read the Clusterware and RDBMS installation guides:
Oracle® Database Release Notes
10g Release 2 (10.2) for Linux x86
B15659-03
Oracle® Database Oracle Clusterware and Oracle Real Application Clusters Installation Guide
10g Release 2 (10.2) for Linux
Part Number B14203-08
Installing Oracle RAC 10g Release 2 on Linux x86
~ Madrid -
Raw devices versus Cluster File Systems in RAC 10gR2
Hi,
Does anyone using cluster file systems in a RAC 10gR2 installation, specifically IBMs GPFS?
Ive visited a company that is running RAC 10gR2 in AIX over raw devices. Why someone would choose to use raw devices , with all the problems to administer , when all the modern file systems are so powerful? Is there any issues when using cluster file systems + RAC? Is there considerable performance benefits when using raw devices with RAC ?
I´ve always used Oracle stand alone instances over file systems (since version 7) , and performance was always very good. I´ve tested raw devices almost 10 years ago , and even in that time (the hardware today is much better - SAN , 15K rpm disks , huge caches - and the file systems software today is much better) the cost to administer it does not compensate the benefits (only 5% more faster than file systems in Oracle 7).
So , besides any limitations imposed by RAC , why use raw devices nowadays ?
Regards,
Antonio BelloniHi,
spontaneously, my question would be: How did you eliminate the influence of the Linux File System Cache on ext3? OCFS2 is accessed with the o_direct flag - there will be no caching. The same holds true for RAW devices. This could have an influence on your test and I did not see a configuration step to avoid it.
What I saw, though, is "counter test": "I have tried comparing simple file copies from an OS level and the speed differences are not apparent - so the issue only manifests itself when the data is read via an oracle db." and I have no good answer to that one.
Maybe this paper has: http://www.oracle.com/technology/tech/linux/pdf/Linux-FS-Performance-Comparison.pdf - it's a bit older, but explains some of the interdependencies.
Last question: While you spent a lot of effort on proving that this one query is slower on OCFS2 or RAW than on ext3 for the initial read (that's why you flushed the buffer cache before each run), how realistic is this scenario when this system goes into production? I mean, how many times will this query be read completely from disk as opposed to use some block from the buffer? If you consider that, what impact does the "IO read time from disk" have on the overall performance of the system? If you do not isolate the test to just a read, how do writes compare?
Just some questions. Thanks. -
hi,
whether 11gr2 rac supports raw devices in ibm aix 6.1 with power ha?
regards
sridharHi;
Pelase see:
Raw Devices and Cluster Filesystems With Real Application Clusters (RAC) [ID 183408.1]
For your future RAC related issue I suggest close your issue here as answered than move your issue Forum Home » High Availability » RAC, ASM & Clusterware Installation which is RAC dedicated forum site.
Regard
Helios -
How to create DIR/File on a raw device in RAC environment.
Hi all,
I use a shell script to create DIR and File on a raw device also it creates schema and tablespaces.
I am facing problem in creating DIR and Files on raw device.
One more thing, can multiple tablespaces be created on a raw device.
Thanks & regards,
SanjeevThanks for the response. Please help me further.
About the Script - It asks for the path for creating DIR and uses shell command to create DIR. Later same path and DIR name is used to create Oracle DIR. Now in place of absolute path raw device name is passed. The same script is also used for creating tablespaces and schema.
There is second script that is .sql script that creates external table in the newly created schema. All this has been working fine on single instance Oracle server. we have tested many times but fails in RAC environment when we use raw device.
Question is - If I use filesystem will the external table's flat files and Directories be accessible to all the instances.
I have one application written in java that would be clustered and running on these oracle servers. This application would be accessing those external tables and their flat files. Will there be a problem accessing these flat files accross the instances.
Regards,
Sanjeev. -
Create a physical standby for Rac on Windows and raw devices
Hi buddies:
I need to create a Physical standby database for a 2 node RAC cluster on Windows, that is using RAW devices.
Can someone of you suggest me a note to follow in order to achive this, i can not find to much information about how to do this.
I guess that the best option would be to use RMAN to do this, but as i said before i havent found too much information.
I would really appreciate your help.
Kind regards
MQIn this case the standby should be created as a single instance on regular files.
Do i have to specify something different in the duplicate rman command to specify that the standby database will be a single instance?
Thanks for your help
MQ -
Hi,
I want to use Raw-Devide in RAC,
Could you Say To me That How Can We see and work with Oracle Database Files when thay are in "unformated and without letter partitions(logic part.)" in Raw-Devide ?
when Oracle begin to Format them?
Thanks a lotIf you are using raw devices, you don't see or manage files at the file system level-- you're bypassing the file system entirely. If you want to see and work with Oracle database files, you ought not be using raw devices.
Are you planning on using Oracle clustered file system or the operating system's clustering functionality for your shared storage?
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC -
Root.sh failed:Raw devices for OEL 5.3 and 10.2.0.4 RAC
Hi
We have OEL 5.3 and Oracle RAC 10.2.0.4
While installing clusterware and running root.sh we are getting the error
Failed to upgrade the cluster registry.
Further the ocrconfig.log are as below:
ocrconfig_20527.log
Oracle Database 10g CRS Release 10.2.0.1.0 Production Copyright 1996, 2005 Oracle. All rights reserved.
2009-08-04 04:38:41.540: [ OCRCONF][286303376]ocrconfig starts...
2009-08-04 04:38:41.540: [ OCRCONF][286303376]Upgrading OCR data
2009-08-04 04:38:41.615: [ OCRRAW][286303376]propriogid:1: INVALID FORMAT
2009-08-04 04:38:41.616: [ OCRRAW][286303376]ibctx:1:ERROR: INVALID FORMAT
2009-08-04 04:38:41.616: [ OCRRAW][286303376]proprinit:problem reading the bootblock or superbloc 22
2009-08-04 04:38:41.616: [ default][286303376]a_init:7!: Backend init unsuccessful : [22]
2009-08-04 04:38:41.616: [ OCRCONF][286303376]Exporting OCR data to [OCRUPGRADEFILE]
2009-08-04 04:38:41.616: [ OCRAPI][286303376]a_init:7!: Backend init unsuccessful : [33]
2009-08-04 04:38:41.616: [ OCRCONF][286303376]There was no previous version of OCR. error:[PROC-33: Oracle Cluster Registry is not configured]
2009-08-04 04:38:41.619: [ OCRRAW][286303376]propriogid:1: INVALID FORMAT
2009-08-04 04:38:41.619: [ OCRRAW][286303376]ibctx:1:ERROR: INVALID FORMAT
2009-08-04 04:38:41.619: [ OCRRAW][286303376]proprinit:problem reading the bootblock or superbloc 22
2009-08-04 04:38:41.619: [ default][286303376]a_init:7!: Backend init unsuccessful : [22]
2009-08-04 04:38:41.623: [ OCRRAW][286303376]propriogid:1: INVALID FORMAT
2009-08-04 04:38:41.623: [ OCRRAW][286303376]ibctx:1:ERROR: INVALID FORMAT
2009-08-04 04:38:41.623: [ OCRRAW][286303376]proprinit:problem reading the bootblock or superbloc 22
2009-08-04 04:38:41.626: [ OCRRAW][286303376]propriogid:1: INVALID FORMAT
2009-08-04 04:38:41.641: [ OCRRAW][286303376]propriowv: Vote information on disk 0 [dev/raw/raw1] is adjusted from [0/0] to [2/2]
2009-08-04 04:38:41.646: [ OCRRAW][286303376]propriniconfig:No 92 configuration
2009-08-04 04:38:41.646: [ OCRAPI][286303376]a_init:6a: Backend init successful
2009-08-04 04:38:41.663: [ OCRCONF][286303376]Initialized DATABASE keys in OCR
2009-08-04 04:38:41.677: [ OCRCONF][286303376]csetskgfrblock0: clsfmt returned with error [4].
2009-08-04 04:38:41.677: [ OCRCONF][286303376]Failure in setting block0 [-1]
2009-08-04 04:38:41.677: [ OCRCONF][286303376]OCR block 0 is not set !
2009-08-04 04:38:41.678: [ OCRCONF][286303376]Exiting [status=failed]...
Any solution please?
Supriya ShThere are a couple of errors that doesn't make the clusterware look fine.
There was no previous version of OCR. error:PROC-33: Oracle Cluster Registry is not configured
proprinit:problem reading the bootblock or superbloc 22
This could mean either your cluster registry file is corrupt or you don't have access to the raw devices. Check the access to the shared storage raw device is valid. If this is not true, then make sure you have all your backup files ready.
~ Madrid
http://hrivera99.blogspot.com
Maybe you are looking for
-
ITEM IMPORT OPEN INTERFACE ERROR
Hi friends, while 'm running import program for product family items 'm facing the following error.. please help me in solving this issue.... TRANSACTION ID : 757 ORGANIZATION ID : 121 TABLE NAME : MTL_ITEM_REVISIONS_INTERFACE COLUMN NAME : ITEM_ID M
-
Best wired solution to control an iMac from 2 other screens/KB/mice
Hi, I've got an iMac model 12,2 installed upstairs in my house and I want to be able to control it (use the OS and the data) from downstairs and from the attic, using a keyboard, a mouse a screen and speakers. Both "consoles" will be used to avoid
-
Aperture crash! HELP!
after my macbook pro stalled for unknown reasons, I can no longer open Aperture... error message reads "...There was an error opening the database for the library "/Users/stacia134/Pictures/Aperture Library.aplibrary". Any suggestions for how to rec
-
Backup and Restore in Server 10.3
Hello all, Server 10.3.9 Mac G4 Tower In Workgroup Manager, if I highlight all the users, and select FILE > EXPORT I get the following message: http://homepage.mac.com/lintila/export.png It says I should use Backup and Restore, but I can not find the
-
Count the no.of of numericals from a string.
Hi team I would like to count the no.of numericals from a given string. Ex. String - '1,23,567 8-9' The result should be 5. Eliminate the comma and space and hypen (-) while counting. 1 - is 1 23 - is 2 567 - is 3 8 - is 4 9 - is 5 Kindly help me. Re