Raw File from Bridge, Lightroom, CS5 not show on Window 8.1 OS

I recently bought a new computer with Window-8.1 OS. Then I loaded CS5, Bridge & Lightroom on.
However, non of the program reads raw file. Please advise what to do. Thank you.
James

If photoshop, bridge or lightroom are old enough, it may not support your camera. A search on adobe's web site will give you a list a supported cameras for that version of software.
If they are not supported, you have basically 2 options
1)Upgrade your software
2)download the free dng converter and convert your raw files to dng which can be opened by photoshop, camera raw, or lightroom.
Another possiblity is the file it self is corrupted. Hopefully that is not the case.

Similar Messages

CR2 FILES FROM 5D MK 3 not showing in CS5 PHOTOSHOP / BRIDGE. any thoughts ??

CR2 FILES FROM 5D MK 3 not showing in CS5 PHOTOSHOP / BRIDGE. any thoughts ??
CANNOT edit or view CR2 RAW FILES.
works fine with Canon 5d mk 2....

Yes, hopefully all you need to do is go to Help>Updates in photoshop cs5 and get camera raw 6.7

Am useing a PC. Have Photoshop CS5, suddenly cannot move Raw files from bridge (or anywhere else) into photoshop. Jpeg move into photoshop ok, did get error message 1 what do I do to correct this om bridge (or anywhere else for that matter)

Useing a PC
Have Photoshop CS5
Suddenly cannot move Raw Files from Bridge (or anywhere else) into photoshop.
I Can move Jpegs into ps the only issue is with Raw files
I did get error1 message but as do not know what that means its no help
any suggestions?

Sorry for the late reply. My email firewall has become a little over zealous & sent a lot of my emails straight to my junk email folder, so I have only just now discovered your reply in my junk mail folder.
The only "don't open files exceeding xxx megabytes" instruction I can find in my Prefs, is in the Bridge Prefs for Thumbnails, & mine is set at 1000mb. The biggest files I handle are bigger than 200mb so I should be able to open a few, not just one.
However, this doesn't explain why I can open a psd format file of 180mb, close it, but then can't open a RAW format file of only 26mb immediately after.
I can open the RAW file only if I restart my computer - very annoying!
However, thanks for the advice about the video card & memory.
So, I'm still stuck as to what the issue is.

HT201070 Since my last update RAW - Files from Nikon D800 are not shown correctly in the Finder as small prewiev. Can anybody help ?

Since my last update to 10.8.4 RAW - Files from Nikon D800 are not shown correctly in the Finder as small prewiev. Can anybody help ?

update 10.8.5 solved this problem. Thankyou anyway.

Raw files uploaded to photo stream not showing on devices

I have Aperture set to automatically upload all the photos I import from my Canon 50D. In the past month the photos in RAW format, have not been showing up in my photo stream. When I look in ~/Library/Application Support/iLifeAssetManagement/assets/sub I can see all the CR2 files and I can see Aperture uploading in the activity window, but nothing is showing elsewhere. The only exception is my iPad that has some from two weeks ago, but the none of the raw files from yesterday are appearing on any device or iCloud.com. I can see jpg taken via iOS but not RAWs.
Any ideas? Has the OS X 10.10.1 or iOS 8.1.1 changed something, is there a new check box. Just slightly (very confused)
Thanks for any help.
Justyn

Justin,
can it be, that you activated iCloud Photo Library (Beta) on your iOS 8 devices? That essentially disables all easy ways to upload photos from your Mac to iOS devices. My Photo stream will stream from iOS devices to other devices and your Mac, but the Mac will no longer stream to the other devices. and iTunes Photo sync will no longer sync photos to the iOS devices. If you enabled iCloud Photo Library (Beta), either disable it again in "Settings > Photos"on your iPhone/iPad, or use the page https://beta.icloud.com and and the Photos.app on that page to upload your photos from the Mac to your mobile devices.
-- Léonie

Camera raw won't open my raw files from bridge. Mac user, camera, Nikon D800, latest camera raw update is installed. Help!!

I don't get a photo preview in bridge of my raw files, just the NEF file thing. Then when I click to open them I get a message that says: "If you are attempting to open a raw file from a digital camera, make sure you have the latest Camera Raw update installed via Help > Updates" "If the problem persists, visit the following link for more information: http://www.adobe.com/go/kb407111". I can't seem to figure out what to do! Help Please!?

Usually the problem with a newer Nikon camera is that the NEF files have been transferred or viewed with obsolete Nikon software, like Nikon Transfer for View NX, and those change something in the header of the raw file that makes it unrecognizable to Adobe products.
For new images, the solution is to either stop using Nikon products to transfer and view your files or update your Nikon products to be as new as your camera.
There is a utility to fix this particular corruption here:
Fix Corrupted Nikon NEF Images

RAW files from Fujifilm EXR 770 not loaded by Lightroom 5.2

Title says it all. The camera is listed as supported by L/r 5.2 but I am informed the RAW files can not be loaded.

So it looks like you will have to wait for an update before you will have support for that camera. It isn't on the list of supported cameras published from Adobe. Nobody here knows when or if new cameras will be added.

Open event for RAW files from Bridge

I installed the “Open As Layer.jsx” to promote the background into a layer and rename that layer to the file name. This is working perfect when I open the file via file menu from PS.
If I use a double-click from the Bridge it works only for JPEG’s and other files but not for RAW-files. As soon as ACR is involved, no open event is fired in Photoshop.
Is there a way to catch another event after the file is placed in PS? I tried to find some with the ScriptListener.8li but I don’t get a log entry.
Thanks for help.

Edit:
Glad to hear you got it working.
I'll just leave what i had put here anyway.
You want Program Files (x86)
That's where the 32 bit programs such as photoshop cs3 are on a windows 7 64 bit system.
Also, in bridge cs3 under Edit>Preferences>Thumbnails ensure Prefer Adobe Camera Raw for Jpeg and Tiff files is checked.
(then restart bridge cs3)

If xmp creation date precedes raw file date Bridge/ACR does not recognize

I decided to start a new thread with this revelation from a prior discussion, because of its importance.
I have several iPad apps that apply metadata to raw images captured in the field using the camera connection kit. These apps have various export mechanisms, with a typical capability to bundle up raw images from the Photos app space with xmp files from the metadata editor app's space, and deliver them via ftp or however. I have seen failures where the creation date of the image file was made equal to the creation date of the xmp, and subsequent to export Bridge would not recognize the xmp file as valid edits to the raw file, even though they both had the same file name ahead of the extension. Up to now I never understood the cause of the failure. Opening the xmp file in a text editor and saving it out with a later creation date "fixed" the problem.
Adobe either needs to change this behavior (IMO the right solution, forget about checking creation dates) or at least publish the dependency. I believe there are a lot of programmers out there that had no idea that the creation date could invalidate the coupling between the raw file and the xmp file.
Richard Southworth

Ok, made some tests.
First: there is nothing interesting in /sys/class/drm. Only one file called version... which, as you might guess, contains the version info for DRM.
Secondly: tested this Phantom Output thing. Used LVDS-1, LVDS-0, LVDS... nothing.
I even tried to add i915 and intel_agp modules to the initramfs... nothing changed.
However, I looked a bit more into dmesg and found another interesting thing:
[ 2.038447] Linux agpgart interface v0.103
[ 2.041261] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input8
[ 2.048750] ACPI: AC Adapter [ACAD] (on-line)
[ 2.060820] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
[ 2.060849] agpgart-intel 0000:00:00.0: detected gtt size: 0K total, 0K mappable
[ 2.060858] agpgart-intel 0000:00:00.0: Intel (null) Chipset
[ 2.060867] agpgart-intel 0000:00:00.0: can't determine aperture size
[ 2.060933] agpgart-intel 0000:00:00.0: agp_backend_initialize() failed
[ 2.060942] agpgart-intel: probe of 0000:00:00.0 failed with error -22
So it seems there is a problem with the AGP module not correctly detecting the card in the first place
Edit: also tested it with the internal screen connected, still the same problem.
Last edited by kjans (2014-12-03 21:33:09)

My imported backup html files from another computer do not show up after import

I am currently transferring files from my macbook pro to a pc netbook. I already exported my firefox bookmarks via an external drive and accessed the html file on my new netbook. After importing the html on firefox on my new netbook, the bookmarks do not show up on my bookmark list.

Please see this article on how to move your bookmarks and settings from one computer to another: [[Moving your Firefox bookmarks and settings]].
Caution: Restoring bookmarks from a backup will overwrite your current set of bookmarks with the ones in the backup file.

Raw file edited in Lightroom don't show edited in PSE

I have edited pictures taken in raw format in Lightroom, and imported them later in pse 7. When I import them, they are not edited, but the original file.
How do I make PSE read the edited information instead?
Thanks in advance
Kanolsen

Thanks for a very quick reply, and congratulations with passing 1000 postings!
I tested it again, and I upgraded to LR 2.4 today, and it didn't create an .xmp file. I found this article which makes LR create an .xmp file. Now PSE can see the changes I've made in LR.
I tried to install Adobe Camera Raw 5.4, but got an error message "Photoshop Camera Raw (64bit), Can not install. Click cancel". I have camera raw 4.5 and I don't have a 64bit system. I can't find any 5.4 for 32bit system?
I didn't see any edits I had previously done in Lightroom in PSE's organizer, nor did the raw file have any modified timestamp.
I really like PSE organizer for tagging pictures so I find them easily, and I have gotten used to Lightroom for editing my files after I got more interested in taking pictures, LR is a lot easier to quickly modifying a lot of pictures compared to PSE where you have to open editor for each and every picture (making sure I can't be bothered fixing up the pics). So my workflow is to import to LR and modifying the pictures to my liking, and then importing them in PSE organizer for looking at them later. I don't use LR for looking at pictures later on. Is that an OK way of doing it, or is there an easier way?
Perhaps I should import as .DNG file to reduce the dependency on the .xmp file?
Thanks again for a quick reply, I have been slower to reply as I had to check and recheck what was happening.
Kanolsen

Batch editing raw files from bridge

When I batch edit my raw files, including saving the file as a jpeg, from bridge or photoshop the resulting file saved never includes any changes I made in the Camera Raw editor. For example if I have lightened the photo by changing the exposure in Camera Raw as a saved jpeg after batching the file is still as dark as when originally shot. Is there some little box I forgot to check or something? Thanks!
andy

Edit:
Glad to hear you got it working.
I'll just leave what i had put here anyway.
You want Program Files (x86)
That's where the 32 bit programs such as photoshop cs3 are on a windows 7 64 bit system.
Also, in bridge cs3 under Edit>Preferences>Thumbnails ensure Prefer Adobe Camera Raw for Jpeg and Tiff files is checked.
(then restart bridge cs3)

RAW files from SONY RX100 II not seen by Aperture

OSX 10.8.5
Sony RX 100 II
Aperture 3.4.5
RAW 4.09 Build 711.2
RAW support 4090 Build 86.2
Mac Pro Mid 2010
2.8 GHz Quad
GB RAM
ATI Radeon HD
Aperture does not recognize RAW files shot with the RX100. I cannot import files. This only became an issue after I upgraded OSX. Everything worked fine before. Do I have to wait for another RAW update for 10.8.5?

The raw support for Sony RX 100 II has been part of the update Digital Camera RAW Compatibility Update 4.08., so the camera should be supported.
Try to reinstall the raw support in a similar way as described in this thread:
Re: Sony DSC-RX100 raw file problem

I can,t open raw files in Bridge/Photoshop CS5 from my Canon Eos 6D. I succeeded in transfering from my camera using Bidge

I need help

Which version of Camera Raw do you use (Photoshop > About Plug-In > Camera Raw) and which one is needed for that camera?
Camera Raw plug-in | Supported cameras

How to find the original RAW file # from a Lightroom exported JPG?

Hello, this is in regards to a Lightroom 3.5 exported JPG. This was a year ago when I had been told it was best to export files with simple renumbering of them from 1 to x... instead of retaining the original RAW 4-digit file name.
I've currently lost the original files, and need to do a search for them via these 4 digits to see if I have them tucked away in any of my drives. I downloaded a metadata explorer, and it's telling me all the lightroom editing information, and everything else, but somehow does not have the simplest of information — that 4 digit original file name.
Am I grasping at straws or is there likely to be any way to find this information out? I don't work with metadata, so there wouldn't have been any customizations to how Lightroom configures this....hoping that's in my favor. Any help is much appreciated!!!!

A note about security (context: downloaded apps & plugins...).
Anatomy of a URL:
protocol://stuff.stuff.stuff.domain.domain-suffix/stuff/stuff?stuff=stuff
None of this stuff matters much except:
domain.domain-suffix (and protocol, to some extent).
So if you download something from:
http://ignafradifcawhatyousay.toolonganyway.my.server.com/gogafnoics...
It's coming from server.com using http (web) protocol.
But, if you download it from:
http://my.server.com.badguy.tv/...
It's coming from badguy.tv, NOT server.com, so if you want it from server.com - danger will robins...
And, if you download from
http://216.195.245.134/my.server.com
It's coming from an unregistered internet address (216.195.245.134) - again: danger...
(4 groups of up-to-3 digits separated by dots is the format for a literal internet (IP) address, instead of domain-name...)
Summary: if you learn the anatomy of a URL, and pay attention to the URL's you are clicking on, or entering directly, you can take more responsibility for security, and assure (to a greater extent) you don't download from an unfriendly source.
Disclaimer: I accept no legal responsibility for anything that happens as a result of anything written above...
Rob

Raw File from Bridge, Lightroom, CS5 not show on Window 8.1 OS

Similar Messages

Maybe you are looking for