Raw file reset? not working

can't reset a raw file back to original, even when I dump the xmp file-I've tried everything I can think of

I hope this question doesn't upset you. But are you sure you are clicking Reset on the raw file, and not on a TIF or PSD file that has been edited in another program? I know, very basic. But the reset button works for me. And when we start discussing problems such as this we have to get into specifics. A general "it doesn't work" with no specific details about what has been done doesn't prove to be very productive.

Similar Messages

NIKON D70 RAW files do not work since upgrading to Aperture 1.1.1

Prior to the software update to 1.1.1 everything was working fine with my D70 Raw files. I now get the maroon "Unsupported Image Format" (USF) when I select the images that were previously fine. They show up for a fraction of a second before I get the error. I tried rebuilding the database to no avail. I can export the RAW files and open them in Photoshop so they are OK. Also now when I import from my D70 I get the gray box instead of the image and a letterbox maroon USF message. I have not seen any posts relative to this issue and wonder if there is something else going on.
Dual 1.8Ghz Powermac G5 2GB RAM Radeon X800 XT Mac OS X (10.4.6)

Try this...it seemed to have solved several people's instability issues:
If this doesn't work, post one of your images for people on the forum to check your images.
repairing disk permissions in safe boot mode:
1. To Repair Disk Permissions in Safe Boot restart your computer while holding the Shift key
2. Do not let go of the Shift key until your screen says Safe Boot
3. Once you see the screen with the words Safe Boot let go of the Shift key. If you need to login, login
4. Open Disk Utility located in the Utility folder of your Applications folder, it'll be down at the bottom
5. Select the hard drive that contains your OS & make sure that First Aid is selected (highlighted) in the Disk Utility window
6. Select Repair Disk Permissions
7. When Disk Utility has done its job you'll see the words "Permissions repair complete"
8. While you're at it & since the system is in Safe Boot I'll Verify the other hard drives & Repair them if they need it
Once the utility program has run through the operating system you can quit the application and restart the computer
I routinely use the Repair Disk Permissions feature in the Disk Utility application on Mondays (Maintenance Monday) so I park an icon of it in the Dock. It is a good idea to Repair Disk Permissions more frequently if you are power editing for many hours at a time or the application you are working on begins to misbehave.
Regardless of what application you are using (unless there is a known bug in the application) Repairing Disk Permissions will take care of many problems.
It is recommended to Repair Disk Permissions before & after installing software or software updates

Importing cr2 raw files won't work on ios 6 when it worked fine on ios5. Anyone have a solution?

I have been importing cr2 raw files to my iPad using ios 5 but importing cr2 raw files won't work on ios 6. Sees files in camera but when import stops it fails with an exclamation mark in red circle. Anyone have a solution?

Don't know if you care anymore or it applies, but I was able to get things working but it took drastic measures.
I had to do a full system reset and update by doing the following:
- Make note of all your settings in your system and apps especially accounts and forget about in app data that's only on your iPad and not in a cloud service because it will be gone after this
- Connect iPad to Mac and startup iTunes
- Hold down Home and Power buttons simultaneously for about 8 sec until the screen turns black
- Release the Power button but continue holding the Home button until there's a popup on your screen which indicates it's in recovery mode
- Follow the instructions to recover your iPad but recover it to factory state, not recover from a backup
- Reinstall all your apps and content
- Reconnect to all your services on your system and apps
I could not restore from a backup since it brought back my bad data too. It also didn't restore my music and no matter what I tried it wouldn't put my music onto my iPad. Had to start clean.
It appears over time that the system gets dirty and there's lots of bad data that can't get resolved. This is especially true if some of your apps have crashed a bunch.

Olympus E20N Raw Files (.orf) not supported?

Am I doing something wrong? The .orf files from my Olympus E20n import as empty images (metadata seems to be importing) with the message the image is an unsupported format. Are .orf files from the E-1 different than E20N?
Also, from the Apple web site, it states DNG files will not work if the Raw format is unsupported. Does that explain why converting the E20N Raw files to DNG fail to display with the same error.
Sorry if this sounds like a "Duh!" but I'd like confirmation before I waste additional hours trying to get this to work.
Thanks!
--ratta
Powerbook 17 Mac OS X (10.4.6)
Powerbook 17 Mac OS X (10.4.6)

Sad but true. I also thought that .DNG was the .PDF of the RAW photo world, but no. One man's DNG is another man's poison. Each DNG contains information to that specific camera RAW and parameters on how to process. So unless the application understands the RAW, it won't understand the DNG either.
Lots of old family snaps from a Canon Powershot s40 stuck in limbo land, unless I go editing plist files ..... or reprocess to TIF's and then import. And yes, that's how I found out about the .DNG gotcha!

.jar file is not working properly :developed in NETBEANS

Hi Gurus,
i am using NETBEANS IDE 7.2.
i am developing a project that interacts with databases 10g and COM ports of machine , these all processes are performed by .bat file which i am trying to run from jFramform , code works perfectly .bat file is also called perfectly when i run the project using F6 from the NETBEANS, for testing i placed some dialogue boxes on the form to test it ,
but when i run executable .jar file , form run successfully and dialogue box works perfectly but .bat file is not called by executable .jar file.
this is how i call the .bat file...
String filePath = "D:/pms/Libraries/portlib.bat";
        try {
          Process p = Runtime.getRuntime().exec(filePath);
        } catch (Exception e) {
            e.printStackTrace();
and below is the contents of portlib.bat file
java -jar "D:\SMS\SMS\dist\SMS.jar"
you must probably ask why i am calling a .jar file using .bat file .
reason is that this .jar project sends message using GSM mobile , System.exit(); is compulsory to complete a job and then do the next one ,
if i use the same file to execute this job it makes exit to entire the application (hope you can understand my logic).
that's why i use extra .jar file in .bat file , when single job is completed .bat exits itself and new command is given.
Problem is that code is working perfectly in NETBEANS when i run the project but when i run .jar then .bat file is not working ,
thanks.

Thanks Sir ,
You need to first test an example that works like the one in the article.
There are plenty of other examples on the web - find one you like:
http://javapapers.com/core-java/os-processes-using-java-processbuilder/
I tried this one.
try {
            ProcessBuilder dirProcess = new ProcessBuilder("D:/SMS/SMS/Send_message.bat");
             File commands = new File("D:/SMS/SMS/Send_message.bat");
             File dirOut = new File("C:/process/out.txt");
             File dirErr = new File("C:/process/err.txt");
           dirProcess.redirectInput(commands);
             dirProcess.redirectOutput(dirOut);
           dirProcess.redirectError(dirErr);
             dirProcess.start();
        } catch (IOException ex) {
            Logger.getLogger(mainform.class.getName()).log(Level.SEVERE, null, ex);
as instructed in the article i compiled both the projects at same version or sources and libraries which is 1.7
here is my version details
C:\>javac -version
javac 1.7.0_07
C:\>java -version
java version "1.7.0_07"
Java(TM) SE Runtime Environment (build 1.7.0_07-b11)
Java HotSpot(TM) Client VM (build 23.3-b01, mixed mode, sharing)
inside the NETBEANS IDE c:\process\err.txt remains empty and code works perfectly , but when I run executable .jar file( by double clicking on that file in dist directry) then c:\process\err.txt becomes full with this error text and there is no response from calling D:\SMS\SMS\send_message.bat
here is the error text
java.lang.UnsupportedClassVersionError: sms/SMSMAIN (Unsupported major.minor version 51.0)
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(Unknown Source)
at java.security.SecureClassLoader.defineClass(Unknown Source)
at java.net.URLClassLoader.defineClass(Unknown Source)
at java.net.URLClassLoader.access$100(Unknown Source)
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)
Exception in thread "main"
here is /SMS/SMS
unknown source ?

File- Export not working after upgrade from 11i to R12

Hi,
File -> Export not working after upgrade from 11i to R12.1.3 in few systems. Can you please let me know what could be the issue.
If export record count more than 200 it is working fine in all the systems and if change the profile option "Export MIME type” value to ‘text/tab-separated-values’ from application/excel also it is wokring.
Thanks and Regards,
Jagadeesha

Enabled the FRD. Below are few last lines. Can you please let me know what i can in this log file contents.
In Argument 1 - Type: String Value: global.frd_debug
Executing GET_ITEM_PROPERTY/FIELD_CHARACTERISTIC Built-in:
In Argument 0 - Type: Integer Value: 196613
In Argument 1 - Type: Number Value: 54
Out Argument 0 - Type: String Value: 12
Executing COPY Built-in:
In Argument 0 - Type: String Value: Entering app_menu.set_prop.
In Argument 1 - Type: String Value: global.frd_debug
Executing FIND_MENU_ITEM Built-in:
In Argument 0 - Type: String Value: FILE.EXPORT
Out Argument 0 - Type: Integer Value: 19
Executing GET_MENU_ITEM_PROPERTY Built-in:
In Argument 0 - Type: Integer Value: 19
In Argument 1 - Type: Number Value: 79
Out Argument 0 - Type: String Value: TRUE
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_menu.set_prop.
In Argument 1 - Type: String Value: global.frd_debug
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_synch.menu_toolbar_sync. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
Out Argument 0 - Type: String Value: NORMAL
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
Out Argument 0 - Type: String Value: NORMAL
Executing COPY Built-in:
In Argument 0 - Type: String Value: NULL
In Argument 1 - Type: String Value: GLOBAL.OUT
Executing USER_EXIT Built-in:
In Argument 0 - Type: String Value: FND GETPROFILE NAME="UPK_RECORDING_ENABLED" FIELD="GLOBAL.OUT" N
FNDCPVCM, 11, Built-In, Entry, 316509814, USER_EXIT
FNDCPVCM, 11, Built-In, Exit, 316509814, USER_EXIT
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.OUT
Out Argument 0 - Type: String Value: N
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_form
Out Argument 0 - Type: String Value: FNDCPVCM
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_block
Out Argument 0 - Type: String Value: MASTER
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_form
Out Argument 0 - Type: String Value: FNDCPVCM
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_block
Out Argument 0 - Type: String Value: MASTER
Executing GET_APPLICATION_PROPERTY Built-in:
In Argument 0 - Type: Number Value: 75
Out Argument 0 - Type: String Value: IHR40P
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed call_all_libraries. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_standard.event. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
FNDCPVCM, 10, Prog Unit, Exit, 316509814, /FNDCPVCM-3/P45_30_DEC_201223_28_33
FNDCPVCM, 9, Trigger, Exit, 316509814, WHEN-NEW-ITEM-INSTANCE
FNDCPVCM, 8, Prog Unit, Exit, 316509814, /DMU-4/P8_30_DEC_201223_23_12
# 15 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301498413820
WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3
# 16 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301512613925
WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3

I have just purchased a Canon 7d Mk2 but the raw files will not open in Cs5 and downloads of Adobe Camera Raw 8.7 will not install. What can I do?

I have just purchased a Canon 7d Mk2 but the raw files will not open in Cs5 and downloads of Adobe Camera Raw 8.7 will not install. What can I do?

Alternatively, install & use RawTherapee instead to develop your raw files instead (free and open source).
http://rawtherapee.com/

I just bought the Nikon D750 and my raw files will not open in CC Photoshop. Is anyone else that has this camera experienced this problem?

I just bought the Nikon D750 and my raw files will not open in CC Photoshop. Is anyone else that has this camera experienced this problem?
My Photoshop says it is up to date, but I am hoping that since this camera just came out, Adobe will have an raw file update soon.

DNG Converter is FREE. Yes, really. No subscription needed.
- Baloney, NOT FREE, it's a proprietary software, not open AT ALL, see Legal Notices, so stop trying to distort the truth here.
Camera Raw (& DNG Converter) 8.7RC has been available since 2nd October, and opens D750 files in Photoshop & Bridge (& Lightroom using DNG Converter).
Adobe Photoshop Camera Raw 8.7 Release Candidate | digital camera raw file support - Adobe Labs
- Still a cumbersome process for this of us that PAID for software and support, the whole point of this discussion is to implement this directly on LR, so we, the PAYING users don't have to waste time doing a useless process that could be EASILY AVOIDED ig Adobe released updates as they are needed, or if they OPENED THE SOURCE CODE so the community could do it.
Adobe created DNG, which is a well-documented backwards-compatible format, which is free for any manufacturer to use.
See here for manufacturers who do (it's an old list, but you get the idea):
http://www.barrypearson.co.uk/articles/dng/products_cameras.htm
- Really? Did you actually read the site? It has PRECIOUS information that illustrate my point: Adobe DNG is an attempt to stop the OpenSource community from achieving the goals of OpenRaw, which is TRUE OPENNESS, Again, Adobe is trying to get manufacturers to PAY LICENSING so they use a PROPRIETARY FORMAT that will HOLD CUSTOMERS on a PAID platform. OpenRaw is he answer for a true competitive environment.
Ask yourself why other manufacturers don't use a documented backwards-compatible format.
- Easy, because they are lazy and want kick-back. The SAME answer that I (and the entire OS community) would give if you asked about Acrobat or MS Office.
If you use a particular piece of software as your main tool, and you buy a camera which isn't yet supported by it, it's your problem. There is an expression used in the industry:
"Poor Planning on your part does not constitute an Emergency on my part."
- I agree here, it's MY PROBLEM that I decided to have a better product, it was my choice. I can still use OS Tools, which will be what I do moving forward, and about that expression, that is EXACTLY why Adobe will keep loosing customers, because the sense of urgency to help who pays their bills is inexistent. You are correct, why should they rush something so simple to help a customer right? Screw the customer... Thanks for making my point...

File- Print not working from SQL Developer 1.2.1 Build MAIN-32.13

File->Print not working from SQL Developer 1.2.1 Build MAIN-32.13.
I downloaded sqldeveloper-1.2.1.3213.ZIP and extract to a local directory. From the extracted directory I ran ..\sqldeveloper\sqldeveloper.exe from Windows XP sp2. The program itself seems to run just fine but File-Print doesn't do anything. In Help-About, Java Platform is reported as 1.5.0_06 and Oracle IDE is 1.2.1.3213. I'm not sure where to look for what is causing the problem.
Thanks

I hadn't tried CTRL-P before but I did today. On the first attempt, I saw a small jump in the memory usage for sqldeveloper.exe as reported in Windows Task Manager. Otherwise, there was no change. A second CTRL-P in the same session produced a further bump but subsequent attempts in the same session produced no further change in CPU or Memory Usage.
Using Task Manager to monitor this further, I tried File->Print again and saw that sqldeveloper would periodically climb to 1 or 2 percent CPU and consume a little more memory. After a minute or so, though, all activity stops again.
I do not get a print dialog box from SQLDeveloper using either CTRL-P or File->Print

File sharing not working 10.6

file sharing not working on 10.6

Rather more information is needed!
With what are (not) sharing?
Other computers on a network? (if so, are they all Macs or some Windows?)
Other Users on the same Mac?

I can't open my photo's in Bridge because the camera (Canon EOS D650) RAW file is not recognized?

Ik kan in Bridge mijn foto's via photodownloader niet openen omdat RAW bestand van camera (Canon EOS 650D) niet ondersteund wordt, ook niet na updates?

Beste,
Ik heb Photoshop CS6, maar blijkbaar wordt mijn camera Canon EOS D650 niet ondersteund.
Mvg,
Op 14-jan-2015, om 21:39 heeft Ronald Keller het volgende geschreven:
I can't open my photo's in Bridge because the camera (Canon EOS D650) RAW file is not recognized?
created by Ronald Keller in Bridge General Discussion - View the full discussion
Welke versie van Photoshop heb je? Voor die camera heb je minstens CS6 nodig.
Camera Raw-compatible Adobe applications
Camera Raw plug-in | Supported cameras
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7096583#7096583 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7096583#7096583
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Bridge General Discussion by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Flash file, clicks not working in one environment

Hi everyone,
I have produced files using Captivate 2, that have output as .exe. These work perfectly across all of our sites, except one.
The only issue with the site where the files are not working is:
- Click box within the Flash file do not progress to the next page
I have output with 'Playback control' and the users at the site in question are able to progress through along the Playback bar. However, I only placed this in for the purposes of testing the file. The final files need to not have the 'Playback control'.
Does anyone know what I can do differently, to ensure the click boxes work on this site in question?
I look forward to hearing from you.
Ravi Sandhu

Hi Ravi
I'm not sure I fully understand your question. You seem to be saying a Click Box isn't working. But you say the "Click Box within the Flash File". I'm not sure if this means you have used Flash to create a button or something that you are trying to use with Captivate or if you simply mean that you have used Captivate to create a SWF, and inside that SWF the Click Box doesn't seem to work.
What would be helpful is if we could see the project first hand. Are you able to post the .CP file for us to download and view? If that's not possible, what about posting a screen capture of the slide with the issue where we can see the entire timeline and all objects.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

I'm running LR 4.4. Just picked up a Sony RX100 M3 cam. It's RAW files are not supported within my version. Is there a free update still available for my version or do I need to purchase an upgrade to LR5?

I'm running LR 4.4. Just picked up a Sony RX100 M3 cam. It's RAW files are not supported within my version. Is there a free update still available for my version or do I need to purchase an upgrade to LR 5?

Camera Raw plug-in | Supported cameras
The Sony RX100 III was first supported in Lightroom 5.5.
There will be no updates for older versions.
So your choices:
Upgrade to Lightroom 5, or
Download the free Adobe DNG converter, convert all Raw files from the RX100 III to DNG format then edit the DNGs in Lightroom 4.4
Photoshop Help | Digital Negative (DNG)

CsrAttachmentUploadDiv part attachment is not rendered SP 2013(Attach file in not working for all the list forms)?

csrAttachmentUploadDiv partattachment is not rendered SP 2013(Attach file in not working for all the list forms)?
Ravi
function ShowPartAttachment() {
ULSopi:
    if (document.getElementById("part1") == null || typeof document.getElementById("part1") == "undefined") {
        alert(Strings.STS.L_FormMissingPart1_Text);
        return;
    (document.getElementById("part1")).style.display = "none";
    (document.getElementById("partAttachment")).style.display = "block"; //problem here

Am also facing the similar problem....any iputs are highly appriciated.
Issue..
1) Defined the attachment type in IMG.
2) Added the attachment type "SFREEATTM" by selecting other attributes---> Attachment Types.
3) Attached the excel file in the design.
See the screen shot below:
The Issue is when testing through tcode nwbc in the inbox the attachment tab is not visible after selecting the particular form.
Please see the screen shot below:
Did i miss any Configuration?? Please suggest...
Regards,
Naveen

I bought Numbers because my Excel files would not work with Mavericks. How can I import a non-functioning Excel file into numbers? (As of now, the file NAME transfers but data is not.) but

I bought Numbers because my Excel files would not work with Mavericks. How can I import a non-functioning Excel file into numbers? (As of now, the file NAME transfers but data does not.)

HI Dave,
I'm surprised you get no message when you attempt opening the Excel document in Numbers.
I'm assuming Numbers 3.1, since you are running Mavericks.
Does the Numbers file that opens show any content?
Does it contain a table?
How large?
Does it contain more than one tab (indicating more than one sheet)?
Do those other tabs contain a table?
Have you checked those tables for data content?
There have been cases in the past of imported documents opening with white text on a white background, giving the appearance of containing nothing. Check for this by selecting a block of cells, then applying a Fill colour or a Text colour using the Format button (paintbrush).
I'd also suggest attempting to open the Excel files using LibreOffice, which can be downloaded from the linked website.
Regards,
Barry

Raw file reset? not working

Similar Messages

Maybe you are looking for