Raw file settings missing from smart objects in tiff files after upgrade to CS6

Yesterday I was using Photoshop CS5 and RAW 6.4 (?) in a Windows environment.
When editing photographs, I  generally open the photo in Camera Raw, make development changes (ie exposure, contrast, etc) and then open the developed image as Smart Object in Photoshop.  I then clone, add layers, masks, etc. and then save the final image as a tiff.
Yesterday, I upgraded to Photoshop CS6 and RAW 7.0.   Now, when I open my tiff files and Smart Objects in the RAW editor, my exposure, contrast, and black settings are missing (reset to zero).  My graduated filter settings are also missing.
It seems to me that the embedded sidecar data in the tiff / Smart Object is not being read correctly.
How can I update my old tiff / Smart Objects?  Re-developing thousands of photos is impractical.
NOTE:  As a side note, I opened a RAW file with xmp data (not stored as a tiff/Smart Object) and had no problems.
Many thanks.

You need to set the ACR engine to the 2010 version in the prefs.
Mylenium

Similar Messages

  • Why is implicit deny missing from outside int incoming access rules after upgrade from 8.25 to 9.1?

                       i have just noticed that after upgarde of image and asdm to 911 and 711, the implicit deny acl is missing from the outside interface. Is this deliberate or a poor upgrade. i am upgrading from 8.25 normally, depends what the reseller sends me.
    should this be happening or am i upgrading in too large a jump?
    thanks,
    david

    Hi,
    Would really see some screencapture / output of the thing you are referring to.
    I imagine that you are perhaps referring to something related to ASDM? I dont personally really use ASDM at all for ASA configurations to I am not up to date on the possible problems it might have or changes made to its interface.
    I am not sure if you have an ACL attached to the "outside" interface? If so then I think the ASDM should show the Implicit Deny at the end while this wont show on the CLI side at all.
    I did just check my own ASA at home which is running 9.0(2) and ASDM 7.1(2) at the moment and it doesnt show an Implicit Deny for my LAN or WAN interfaces ACL.
    Though the basic ACL operation is still in effect. If its not allowed in the ACL then its blocked by Implicit Deny. This can be confirmed with "packet-tracer" test on your firewall also.
    - Jouni

  • IPhoto won't import Nikon D70 raw files after upgrade to Leopard

    I recently upgraded to Leopard, and yesterday, I hooked my Nikon D70 up to the computer. iPhoto auto starts, and tells me that there are pictures to import. When I click the import button, iPhoto tells me that it is importing the photos, (which are in Nikon raw format) but in fact, it is not. The photos don't "flash" across the screen as they are being imported as they used to. When iPhoto thinks it is done, there are no new photos on my hard drive. A spotlight search confirms that fact.
    Jpeg photos still import just like they used to. Only raw photos don't import.
    If I manually open iPhoto, and click on file then import, I can find my cameras CF card, and highlight the photos I want to import, and iPhoto will then import raw photos. It won't import them with the simple attach the camera, one click import that I have grown used to. My D70 is a supported camera for iPhoto, and it used to work in OSX 10.4. Is there a setting I'm missing somewhere?
    Thanks in advance for any help offered.

    I had the same prob with my mac and my D70.
    I did an upgrade to leopard from tiger. After that, iPhoto would not import photos. The camera and pics would show up in the app, and would let me try an import, but it would come up with an error saying "20 photos were in an incompatible format and could not be imported".
    Since upgrading to Leopard, image capture wouldn't work either. App would run and then wouldn't. Would crash and error. Wouldn't import photos at all either.
    I was able to manually drag photos from my camera to the desktop and then import into iPhoto.
    iPhoto wasn't the only thing playing up on my mac (networking, file permissions, backlit keyboard, software update, ffmpeg app were all problematic), so I backed up everything I wanted to keep to an external drive and did an erase and install of Leopard. This has fixed practically every problem I had. Do the same if you can, cos it has made my mac a pleasure to use again.

  • I cannot open InDesign files after upgrading to CS6.

    Error message is "Cannot open the file *.indd. Adobe InDesign may not support the file format, a plug in that support the file format, a plug-in that supports the file format may be missing, or the file may be open in another application" Can anyone help!

    That message means exactly what it says, more or less. The three possibilities are it isn't an InDesign file at all (we see that here a lot), there is a .idlk lock file in the same folder (delete it), or the file has been damaged (frequently happens with flash drives).
    If you open the file in a plain text editor like NotePad or TextEdit (it will look like gibberish) and paste the first few lines here we may be able to tell you if the file is damaged or not an InDesign file.

  • Illustrator won't open .AI files after upgrade to CS6, but can open them in Fireworks

    Cannot open .AI files, I have run all the updates but still having to use Fireworks to open AI files.

    Same problem as this thread? Illustrator doesn't allow setting of file associations using windows, the way every other problem does...  http://forums.adobe.com/thread/1254448

  • Can you extract higher resolutions from Smart Objects or Linked Smart Objects?

    When I am designing at 1x resolution, can I extract assets from smart objects or linked smart objects for 2x or more? If so, how do they scale up?

    Yes with caveats.
    PSD and Illustrator smart objects are also re-rendered and smoothly scaled to the requested resolution.
    Other smart objects (including those with filters) are only scaled up from the resolution they are at within the Photoshop file. If you want them to re-render, you can paste them at 100% resolution into a linked smart object and get the smooth scaling.

  • Batch Rename Raw Files After Import?

    Can you batch rename raw files after you import, so that the file name changes in Aperture and on the hard drive? I want to be able to edit images, and then rename only the keepers. This has been asked before here, but I could not find an answer.
    Thanks!

    File -> Export, Kind: Original
    When you import a Raw to iPhoto it automatically creates a jepg preview of the file. Why? Because you cannot do anything with a Raw: you cannot print it, use it a slideshow and so on. However, with this preview you can work with the photo immediately.
    You can, however, also process the Raw in iPhoto simply by editing it. The Raw processing engine in iPhoto the same one used in Aperture, but with less fine control. (Think of the differences between Word and TextEdit, iMovie and Final Cut). The output from the processing then replaces the preview. You can choose to save your output as either jpeg or tiff in the iPhoto Preferences.
    When you are processing Raw in iPhoto you will see the Raw badge on the bottom of the iPhoto Window
    Uploaded with plasq's Skitch!
    Note: After you have processed a Raw, subsequent edits to the photo are carried out on the processed jpeg (or tiff) not the Raw. If you want to go back to the original then you need to use the Photos -> Reprocess Raw command.
    Aperture works in an entirely different way. What are you trying to do, exactly?
    Regards
    TD

  • Problem reading camera raw files after I reinstalled LR4.

    Now can't read Nikon 5200 camera raw (nef) files in Develop Mode. Could do so before. Any suggestions?

    Thank you all!!!! I was successful in updating!!!!! Appreciate your assistance!
    Date: Sun, 3 Nov 2013 06:35:19 -0800
    From: [email protected]
    To: [email protected]
    Subject: Problem reading camera raw files after I reinstalled LR4.
        Re: Problem reading camera raw files after I reinstalled LR4.
        created by JimHess in Photoshop Lightroom - View the full discussion
    The file that you downloaded is a self-contained running application that installs the update on your computer. After you download that file, you need to double-click on it and follow the prompts to install it. After it has completed you will have Lightroom 4.4 installed and it will be ready to run. If you are on a Windows computer, the installation will replace your 4.1 installation. If you are on a Mac then you will have both versions installed and you will have to be sure you start the right one.
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5810683#5810683
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5810683#5810683
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5810683#5810683. In the Actions box on the right, click the Stop Email Notifications link.
               Start a new discussion in Photoshop Lightroom at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Problem:  this mac is not reading an excell file after upgrading to yosemite.   My Mac is from 2009, it use to work perfectly but it wasn´t able to open some apps, thats why i upgrade it.   Now it once i donwload the zip it appears with an ".ods" ext

    Problem:  this mac is not reading an excell file after upgrading to yosemite.   My Mac is from 2009, it use to work perfectly but it wasn´t able to open some apps, thats why i upgrade it.   Now it once i donwload the zip it appears with an ".ods" extension
    i even already download a link
    http://www.microsoft.com/en-us/download/confirmation.aspx?id=44026
    which i read on another support page... but it doesnt allowed me to install it cause it says that i already have the disk of this program....
    Im afraid to erase it and not being able to get it back...
    What can i do!??
    Thanks in advance for this kind answer!!!

    fsolution wrote:
    Problem:  this mac is not reading an excell file after upgrading to yosemite...   Now it once i donwload the zip it appears with an ".ods" extension...
    If the "it" refers to a compressed (zipped) spreadsheet that you downloaded, the ".ods" extension is used by LibreOffice and probably OpenOffice (which are free versions of MS Office) for spreadsheets, which would suggest that wherever you're getting that "Excel" file from has switched to one of those programs. I've tried opening an .ods file from LibreOffice using MS Office 2013 for Windows and it does open though with a warning that some things have been changed. I don't know if Office for Mac can normally open .ods files. But if your need is to just open .ods files, take a look at LibreOffice.

  • Cant open doc files from the server on MacBook Air after upgrading to Maverick

    Cant open doc files from the server on MacBook Air after upgrading to Maverick, I can only open up docx file. Thank you!

    Thanks for the suggestion! I don't use Phantasm or VectorScribe (or any Astute Graphics plugins for that matter). I do, however, have a Wacom tablet and have a few plugins that concern using Blurb Book Creator as well as LiveSurface Context.
    I did the very unfortunate and foolish act of upgrading to Maverick without a backup, so postponing isn't an option for me.
    I geuss my question at this point would be, would it be worthwhile to wipe all the adobe products from my harddrive and re-install them? Or would that be a useless endeavor.
    I don't have an external hard-drive so backing up and re-installing the entire OS would be a bit much. Any suggestions?

  • Cannot print a PDF file after upgrading to Windows 8.1

    Cannot print a PDF file after upgrading to Windows 8.1
    I can print anything else from either the Desktop or Start but not a PDF.  No error message but just does not print.
    Update: down loaded Adobe Reader which runs on the desktop so when I read a PDF file it now runs on the desktop and I can print it.

    Cannot print a PDF file after upgrading to Windows 8.1
    I can print anything else from either the Desktop or Start but not a PDF.  No error message but just does not print.
    Update: down loaded Adobe Reader which runs on the desktop so when I read a PDF file it now runs on the desktop and I can print it.

  • Why missing personal hotspot  in my iphone 4s after upgrade ios 7 ?

    why missing personal hotspot  in my iphone 4s after upgrade ios 7 ?

    I'm having the same issue (iOS 7.0.3 on 5s).
    Had Sprint add Wi-Fi Hot Spot to my account today, went to set it up, and there's nothing in Settings for "Personal Hot Spot." Apparently it should appear underneath "Cellular" but it's just not there.
    Resetting network settings didn't help. And Sprint doesn't know why it's not there either.

  • I have lost large number of files after upgrading to macOS Yosemite. Any help to restore them?

    I have lost a large number of files after upgrading to macOS Yosemite!  Any help on how to restore the files would be much appreciated.

    Iimport them from your backup you made before choosing to upgrade to Yosemite.
    Cheers
    Pete

  • Random audio interruptions. I'm getting audio snippets, no more than a word or syllable, about 20 times per hour. Emanates from Mac internal speakers. Started after upgrading to OS 10.9.5. What is it? How can I stop it?

    Random audio interruptions. I'm getting audio snippets, no more than a word or syllable, about 20 times per hour. Emanates from Mac internal speakers. Started after upgrading to OS 10.9.5. What is it? How can I stop it?

    Hello Achates:
    I did not read the rather long post. If you wish to reinstall OS X 10.4, use your software install DVD. Backup is essential. To minimize your risk, I would use an archive and install:
    http://docs.info.apple.com/article.html?artnum=107120
    In that way, you will have a fresh copy of OS X and your current settings will be preserved.
    Incidentally, I do not agree that the printer problem is best solved by reinstalling OS X. I have had HP printers for sometime and, on one occasion, had difficulty after an upgrade. HP technical support walked me through uninstalling all traces of the HP driver and then reinstalling.
    Barry

  • QT10.1 will not open .wmv file after upgrade to 10.7.4

    Hi Qt 10.1 will no longer open .wmv files after upgrading to 10.7.4.  I have the latest version of flip for mac.  They will opwn in QT7 pro but does anybody have a fix for this problem at all?  Thanks in advance. 

    I'm having the same issue, but do not find a 3ivx codec in the mentioned QT folder.  I do, however, have these codecs listed in that folder:
    AppleGVAHW.component
    ApplePiletVideo.component
    AppleProResDecoder.component
    AppleVAH264HW.component
    QuartzComposer.component
    QuickTime3GPP.component
    QuickTimeComponents.component
    QuickTimeFireWireDV.component
    QuickTimeH264.component
    QuickTimeIIDCDigitizer.component
    QuickTimeImporters.component
    QuickTimeMPEG.component
    QuickTimeMPEG2.component
    QuickTimeMPEG4.component
    QuickTimeStreaming.component
    QuickTimeUSBVDCDigitizer.component
    QuickTimeVR.component
    Could ANY of these be causing my wmv files (or my Flip4Mac) to be corrupt and unable to work?  I appreciate any insight you may have.

Maybe you are looking for