Raw file thumbnail and preview problem in Bridge

When downloading raw files from my new Nikon D3, Bridge generates thumbnails that are a fixed size and the preview panel only shows a thumbnail as opposed to enlarging the image to fit the preview panel. Thumbnails and Preview still work fine with jpegs. My versions of CS3, Bridge and Version Cue are up to date, I believe.
Thanks...

Three things:
• You need to make sure you have updated to Photoshop 10.0.1, Bridge 2.1.1.9 and Camera Raw (ACR) 4.6.
• You need to purge the cache for the offending folders through the Tools menu in Bridge.
• You need the Bridge forum:
http://forums.adobe.com/community/bridge/bridge_macintosh?view=discussions&start=0#
Please post there if you need further Bridge help.
Raw files from the D300 are not supported by the old, obsolete version of ACR that gets installed by default by CS3. What you're seeing now is the embedded JPEG preview only, not the converted raw. That's why you have to upgrade to ACR 4.6

Similar Messages

Lr 3.4 - Thumbnail and preview problem

I have a problem... I use Windows 7 64bit SP1 and Lightroom 3.4 ( I've tried Lr 3.3, which looks exactly the same). Unfortunately, my Lightroom can't see or have any photos' preview ( jpg, raw).
I've tried preinstall Lightroom, Windows, Service Pack 1 and Graphic Card driver, but it doesn't work. I have no idea what I should to do, to solve that problem. What's more for Windows Explorer thumbnail works correctly
If you have any idea or solution... let me know.
Thanks in advance.

If you switch to Develop module, can you see the image?
If so, it's a corrupted preview cache, and we can talk you through trashing it and rebuilding.
If not, it's most likely a corrupted monitor profile. Recalibrate your monitor or at least set it to sRGB temporarily. http://www.lightroomqueen.com/blog/2008/12/28/corrupted-monitor-profile/ Use the Vista instructions in that link for Windows 7.

[Bridge CC] Is there a way to see thumbnails and preview of WMF and EMF files?

I have a big archive full of technical illustrations, designed by me in the past, saved as EMF or WMF files, very good and lightweight to import in Word documents.
In the past, Adobe Bridge (CS3 at least) was able to show thumbnails and preview of such a file type.
Now it is impossible, for me, to search and retrieve, fast enough, old files.
Is there a way to let Bridge returns to show this files?

Hi Ram,
You can see the objects included in a transport request by going to se09 and opening your transport request and drill down to the task and below the task you would have all the objects that are included in the tranport. You can also use se03 to get the details by drilling down the tansport request.
The problem with importing the function module might be because either the function module or the function group may not be active which may cause the tranport to fail. please check if both are active or not.

Resizing RAW thumbnail and preview

No one in Adobe technical support seems to be able to help me.
I've updated CS2 to CS5, and in Bridge, am unable to increase the thumbnail and preview size of .CR2 images. JPEGS, PDF, PSDs... they all resize fine. And before you ask... yes I know about the slider at the bottom. And yes I have tried all the 'cache' options.
I have also tried to create a new login with administrator rights (at the request of tech support) and it still has the same issue.
I have also reinstalled CS5 once as well.
Any suggestions? Pretty please?

Thanks for reporting back, still some questions.
Did you search for hidden cache files other than the before named cache
files?
Here or some of my thoughts about your attempts:
>> Purged the cache Bridge CS5
Have you already tried to delete the complete cache folder manually from the
user library cache/adobe/adobe Bridge CS5 location? After restart Bridge
creates a fresh, new but completely empty cache file and you need to recache
your thumbs and previews.
>> Deleted the Bridge preferences.
By this you mean the plist file from user library and combined with
restarting Bridge holding down option key and choose reset preferences?
>> Re-created the SwitchBoard preferences files.
Could you explain how? To my knowledge Switchboard resides at root level on
your system and serves Adobe Air that is also used by Bridge as part of the
CS suite. But I'm not aware of an option to recreate the preferences?
>> Updated all software including Camera Raw Plug-in and Bridge and Photoshop
That should do but for security check if you have only one version active
(in PS Menu Photoshop about plug ins - Camera Raw, it should say 6.3.0.79)
>> Created new user
Most efficient to rule out user specific problems, which brings me to the
question if you have the default application folder as place for installed
CS applications?
>> Reset all work space
It was a wild guess...
>> Deleted and reinstalled CS5 twice now
That is time spoiled if you did not use the Adobe Clean tool also to get rid
of all preferences. See this article also with the download of the clean
tool itself.
http://www.adobe.com/support/contact/cs5clean.html
I just can't understand why it is only RAW images. All other formats are fine.
It is odd.
Might narrow it down on the raw converter?
Any other suggestions?
Personally I would start from Scratch. First read about the Clean Tool and
be sure to back up all your customized settings, actions tools etc in all
CS5 applications. Use the save option as much as possible for these settings
you want to keep and give the files a proper name and new folder so you can
import them again in an easy way.
Deactivate the software and use the uninstaller that can be found in the
separate Suite applications in the application folder. Then use the clean
tool and then use a search like spotlight (but preferable the free or almost
free Easy Find that also finds hidden files) to check on all other Adobe
files that reside on your system and decide if you trash them or place them
in a separate folder outside the library.
Don't forget to delete the hidden cache files for Bridge. You will need some
time to recache the lot but if it works it is all worth it.
If it does not work I help you crying if that is of some comfort for you

Bridge "stops working" and displays split thumbnails and previews.

When working with Windows XP, my Photoshop/Bridge CS3 was working fine. On my new computer with Vista, Bridge acts up in strange ways. It sometimes shuts down spontaneously, causing a Windows "Bridge has stopped working" message to appear.
At other times, Bridge displays thumbnails that are split or only half there, with the preview image also split in half with the sides reversed. If I wait a few minutes, the proper thumbnails and preview finally appear, but this is a nuisance. BTW, the same copy of Bridge works just fine on my laptop with XP. When I contacted Adobe, they blamed it on Windows. When I contacted Windows, they blamed it on Adobe. Anyone with similar problems and suggested fix?
Thanks!

Hi Gerry,
as it is nearly two months since your initial post, you may have already solved your problem. In which case I'll continue with this reply for the benefit of anyone else who suffers the same affliction:
My problem was Bridge CS3 running on a 32-bit Vista Home Premium SP1, Intel Core 2 CPU T5300 @ 1.73GHz and 2GB of RAM (if that makes any difference). Like Curt, I'm no computer expert either but I was experiencing a very similar problem to your's in CS3 Bridge.
The error message contained something about the "nvlddmkm.sys" not working. The 'nvlddmkm.sys' refers to the driver for my graphics card, a 'NVIDIA GeForce Go 7300', whose driver I had recently updated (to solve a separate conflict between an updated BIOS - it never stops!).
After some fiddling, I discovered that changing the 3D Graphics setting on the Nvidia Control Panel made Bridge once again behave.
Open the Nvidia Control Panel (right click on the 'desktop' to access it).
Under the '3D Settings' task, select 'Adjust Image Settings with Preview'. This should reveal a window with an image of a slowly spinning, three-dimensional Nvidia logo. (I understand that the Nvidia Control Panel is common to all its cards.)
Under the spinning logo image there are three options for 3D settings. On my computer, while my Bridge was broken, the "Use my preference emphasizing: Balanced" option was selected. I changed the option to, "Let the 3D application decide" and crikey! - when I restarted Bridge the previews were once again working. (It may be my imagination, but Bridge appears to now be going better than ever.)
I switched the Nividia preferences a couple of times just to make sure. The change appeared to have done the job.
NB: I noticed another discussion in the forums entitled "Suddenly No Images in Bridge" which appears to be a similar problem. They resolved it this way;
"Depress and hold Ctrl-Alt-Shift when you start PS or Bridge. A menu comes up with three options. Check them all."
I didn't see that fix until I had sorted mine so I haven't tried it... but now that 'it ain't broke', I 'ain't gonna fix it'!
Hope this helps you or someone else.

Good afternoon ladies and gentlemen! My question concerns the impossibility to open RAW-files directly from the program Adobe Bridge. At the moment when you open a RAW-file from Adobe Bridge by double-clicking, RAW-file is opened only in Photoshop. In t

Good afternoon ladies and gentlemen!
My question concerns the impossibility to open RAW-files directly from the program Adobe Bridge. At the moment when you open a RAW-file from Adobe Bridge by double-clicking, RAW-file is opened only in Photoshop. In the settings Adobe Bridge - in "open RAW-files by double-clicking in Adobe Camera Raw» box is checked. When you try any changes in the settings Adobe Bridge system displays a message:
Bridge's parent application is not active. Bridge requires that a qualifying product has been launched at least once to enable this feature.
The entire line of Adobe products on my computer updated to the latest updates. Previously, a family of products Adobe Photoshop on your computer is not set. Computer - PC, Windows 7 Enterprises.

<moved from Adobe Creative Cloud to Bridge General Discussion>

Missing thumbnails and previews Bridge CC x64. Help!

Week ago have missing thumbnails and previews in Bridge CC x64.
Where are no thumbnails cannot preview and open in photoshop.
What can i do? Please help!
Thanks!

Thanks, station_two!
I have surprised there all pictures from OneDrive on Windows 8.1.
When i copy those out of OneDrive thumbnails generated
Then copy all folder with images back and all works good!
Very strange. But good!

Thumbnails and Previews have a green tinge

The thumbnails and previews in my library have suddenly developed a green tinge.
I have tried Update Previews, Generate Thumbnails, and Generate Previews with no success. I have also used Repair database and Rebuild database, again with no positive result.
I am at a loss to know what to do next.
Jerry

I have a similar issue, but it doesn't seem to affect all thumbnails.
Thumbnails have thos unprocessed raw look (bluish, greenish tint):
But they look fine once you open the real pictiure:
What could possibly cause this problem? I have re-generated prebviews and thumbnails but can't seem to solve the problem.

RAW files, iPhoto and PS CS2

hi
i use iphoto and a raw workspace in photoshop to import and edit digital images taken with a nikon digital camera. i notice now that whenever i double-click on one of the raw file thumbnails in the library, it opens in photoshop as a very large 72ppi jpeg, instead of a raw file. "get info" shows it is a raw file, if i switch image editors, and edit the image in iphoto, it opens as a raw file. if i import the image from the camera to a folder on my desktop and double click on it in my finder, it opens just fine in photoshop in the raw workspace.
raw digital files that were not recently imported into iphoto open just fine ( in cs2 ) it is only files that i newly import. it doesn't matter if the raw-images were imported from a card reader, directly from the camera, or drag/dropped from a folder on my desktop once put it into the iphoto image library, cs2 isn't told by iphoto that it are raw .... is this a problem with the update from v5.0.3 to v5.0.4 ?
is there anything that can fix this problem ?
g4 powerpc Mac OS X (10.4.8)

iPhoto is a consumer-level application, and RAW is a format mostly for professionals. When you import a RAW file into iPhoto it saves the RAW in the Originals folder and instantly creates a jpeg version of it in the Modified folder. It is this Modified jpeg that is being opened in Photoshop. There is no way to override this behavior.
My suggestion for your RAW workflow is to use Image Capture (in your Applications folder) to upload from your camera (to a folder anywhere outside of your iPhoto library folder). Edit in Photoshop. Last, import into iPhoto. Once inside iPhoto, the desktop copies can be deleted. You can set Image Capture to open when you connect a camera in Image Capture Preferences. It's not elegant, but I haven't seen any better solutions here.

Is it possible to exclude thumbnails and previews from a vault?

I think in Aperture 1.5, vaults did not include any preview or thumbnail files, but only the files containing metadata, adjustments etc. (and the masters, unless referenced only)
Somewhere along the way to 3.0 this changed so now previews and thumbnails are backed up each time you update your vault.
This has two BIG drawbacks:
- the vault becomes much larger than necessary (I always generate large previews)
- the update process takes much longer as more files need to be copied.
On the other hand, I do not see any tangible benefit of including the extra files - provided I back up both masters and the adjustments, I should be able to regenerate thumbnails and previews after a restore following, say, a fatal hard drive error.
(If I chose to delete all previews and thumbnails prior to creating a vault, I assume that the vault would be significantly smaller, without losing any information that cannot be recreated by 'generate thumbnail/preview')
Is my understanding correct?
If so, is there a way around it?
If not, can we please have this option in Aperture 3.5 or 4.0?
Thank you!

Hi Matt. You raise an interesting point. What you say makes sense to me.
My general response is: external drives are cheap. Buy what you need and don't spend any time trying to "save" disk space. IME, the administrative overhead is far more costly than the upfront equipment costs.
Here are some specific answers (as I understand how Apeture uses Vaults).
There is no way to exclude Previews from Vaults. Each Vault includes all extant Previews.
Each Vault is a differential back-up. Updating the Vault should update only those files that have been added, changed, or deleted. Unchanged files -- including Previews -- are not backed up anew each time you update a Vault. The amount of time it takes to update a Vault will vary based on the number of changes made, and should have nothing to do with the size of the Library or the number of files in it.
You can test your hypothesis. Delete all your Previews, and create a new Vault. Let us know what you find out.
Suggestions for enhancements should be made directly to Apple via "Aperture→Provide Aperture Feedback". The forum is -- officially -- strictly for user-to-user interaction.

My .mov file thumbnails do not display in Bridge CC.

My .mov file thumbnails do not display in Bridge CC. It worked previously with CS6. Mac Operating system 10.6.8
Tried purging cache without any luck. Any suggestions.

This forum is actually about the Cloud, not about using individual programs
Once your program downloads and installs with no errors, you need the program forum
If you start at the Forums Index http://forums.adobe.com/index.jspa
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says ALL FORUMS) to open the drop down list and scroll
http://forums.adobe.com/community/bridge

Aperture constantly rebuilds same thumbnails and preview images.

What is behind Aperture 2's pathological obsession with constantly rebuilding the same thumbnails and preview images, and is there any way to stop it? I can't link this performance killing problem to any specific action on my part; I see it in many different circumstances. For example:
(1) Putting the system to sleep while Aperture is open then resuming later
(2) Hiding the Aperture app, working on other memory consuming apps for a while (e.g. Photoshop), then returning to Aperture
(3) Switching from one project to another via the "Projects" tab.
(4) Quitting Aperture then restarting it.
I can say with 100% certainty that this is not the result of some previous thumbnailing/preview generation operation that was interrupted. The # of images in the project doesn't seem to have a bearing. Nor does the type of camera or image type I've imported from the camera.
I can be happily working in Aperture, working with a project created months ago, when all of a sudden the "generating thumbnails" message and the dreaded Wait Cursor appear and my speedy, well-apportioned iMac grinds to a total halt while Aperture does the same ** thing it's already completed before.
The only hit I get when searching Apple's support site mentions a known bug for those who upgraded from Aperture 1 to version 2 but definitely does not apply to me here.

Thank you for the reply Tony. I've followed your suggestion but Aperture continues to (apparently) randomly decide to regenerate thumbnails and previews.
The problem has become bad enough that I've had to stop using Aperture completely.
Doesn't anybody from Apple read these forums? I can't possibly be the only Aperture user in the world to experience this problem...

Thumbnail and preview transparency

thumbnail and preview transparency. i mean, this is essential.

Yes, absolutely.
I am an adamant supporter of Photoshop and Bridge for their usability - so I am shocked to see Bridge can not show the transparency of my .tga images, while a 25$ codec pack for Windows 7 can.
Am I seriously expected to open every single image in Photoshop to check on the alpha channel???
Any hint on where to enable this feature would be greatly appreciated - just in case this fundamental option is simply well-hidden.

Latest Lithroom 5.6 does not recognize my .cr2 raw file format and Windows 7 it asociates with my older raw plug in in Ps CS5.5. I am not able to change default program for .cr2 in the properties pannel...

Latest Lithroom 5.6 does not recognize my .cr2 raw file format and Windows 7 it asociates with my older raw plug in in Ps CS5.5. I am not able to change default program for .cr2 in the properties pannel...
every new released update of Lr from v 5.2 changed somethin in my Windows 7 Professional settings. I am stucked. Can somebody help me please? Many thanks. Andrej

Hi Jim,
yes after I imported my .cr2 raw files into new catalog it started to work. Windows 7 still does not recognize them but I can edit them as you said within the Lr5.6 and then export them into .psd or .dng files...as needed.
I bought Lr5 only because I got present - my new camera Cannon 70D and because my older Photoshop CS5.5 raw plugin does not recognize. cr2 files.
Many thanks for your help.
Andrej.

File permission and ownership problem

I am trying to resolve some file permission and ownership problems that are left over from using Migration Assistant to set up my iMac from an older iMac. In a terminal session when I use the ls -l command I'm getting a file/directory owner of 504. Sometimes the group is admin and sometimes the group is also 504. I think this is because the owner of the file on the old computer is not present in the new one but I want to be sure before I just change the owner and group.

The following should give you an indication->
id -un 504
or you could try->
dscl . list /Users UniqueID | grep 504 && echo "User exists" || echo "User does not exist"

Raw file thumbnail and preview problem in Bridge

Similar Messages

Maybe you are looking for