RAW files are often unnecessary, but then, you never know.

I've decided to use both Raw and SQH (Olympus jpeg) when I take a shot because RAW files are often unnecessary, but then, you never know. Anyway, Aperture imports both versions as one would expect, and I can switch between versions by using a right click pull down and select either the JPEG or the RAW as original but my problem is that I can't see both at once, anywhere. I can't remove only one and it appears that if I trash either one they will both be gone.
What settings am I missing to import both version of the file as separate and visible and selectable images?

Read this page in the User Manual:
http://documentation.apple.com/en/aperture/usermanual/index.html#chapter=4%26sec tion=6%26tasks=true
To import the RAW and JPEG image files as separate masters: Choose “Both (Separate Masters).”
Note that you can import just JPGs, and then later go back and get the RAWs (assuming you save them).
My advice is to switch to RAW only (unless you work on stringent deadlines).

Similar Messages

I have photoshop CS5 extended on my PC; some days ago I had to substitute Windows 7 so I installed Windows 8. Since then my RAW files are not supported by CS5, I cannot see them anymore

PROBLEM WITH RAW FILES with WINDOWS 8.
I have photoshop CS5 extended on my PC; some days ago I had to substitute Windows 7 so I installed Windows 8. Since then my files RAW are not supported by CS5, I cannot see them anymore

Your answer has been very useful. I have made ACR update and now my RAW files are normally supported and visible.
Great !
Thank you very much ...

How to Delete imported JPEGS after matching RAW files are imported as masters

Using a 5D Mark III and shoot JPEG (SD) and RAW (CF).
Aperture 3.5.1, using a managed library
Perviously, using a 7D so new to shooting JPEG and RAWs from an aperture Aperture workflow standpoint.
I know that i can import the JPEGs > delete images that do not make the cut > then import the matching RAW files in the import dialogue that correspond to the JPEGs in the Aperture Library.
I use the RAW files as my Camera Master images and once the RAW files are imported, the smaller resolution JPEGs are no longer needed or viewed in my normal edit workflow. I only need the JPEGs to quickly go through the images to find out which RAW files i need to import at a later time to increase the speed of import > edit > deliver.
My Assumptions:
1. Logic would lead me to believe that after import the user should see a stack like image representation with whatever file type is considered Master to be on top and the viewable secondary file type on the bottom. clicking on the image stack should allow you to see both file types as you would normally see with image stacks with the same files types. This is not the case... What am i missing here?
2. Logic again would lead me to believe that when i have the ability to delete one of the 2 image types as i do not need both in the end. After the import process is complete and RAWs are backed up, I want to delete the JPEG files as they are just taking up more space on my DAS drive array... There is no need to keep a duplicate of every file in both JPEG and RAW format. This is not the case as when i delete the JPEG or RAW, both files formats are deleted simultaneously. What am i missing here?
Problems: (correspond to Assumptions above)
1. I do not seem to have access to both images (JPEG & RAW) in a stack where i can expand and close the stack to see both? It seems like i only have access to the image type i have selected as Master? This seems counter intuitive to what the workflow should be as why would aperture 'lock the secondary file types away' so you can't easily view both file types as the same time for comparison?
2a. Reality seems to be that i do not have access to the JPEG and RAW image files. I can only see one at a time by selecting the images and choosing 'make JPEG master’ and then respectively... 'make RAW master', but you can't see both at the same time for file comparison.
2b. Also, I can't find a way to delete the JPEG images after the RAW files have been imported. I would presume most professional photographers shoot RAW and do not shoot JPEG as their camera master or editing master images. I do not understand why aperture has captured both as a pair in the library that does not allow me to delete the JPEG (in this case) as i have selected the RAW as my master.
If someone can please help... The function seems like either i am missing something obvious or that the implemented function of using RAW + JPEGs files for import is broken from a real world workflow standpoint.

leonie...
thank you for clearing that up for me.
I think that at this point it is silly to use the JPEG+RAW import functionality as it seems that it takes longer to do the above steps than to just import only the RAW files and press on from there.
I seems what i have done in the past of only importing the RAW files and then using the quick preview functionality to reduce image load times is the best thing in can come up with without keeping 'duplicates' in the database.
That really baffels me that there is no built in functionality to remove the JPEG from a RAW+JPEG pair and i wonder how the real world photographers who help Apple test and implement software to solve real world workflow problems thought the JPEG+RAW import was going to be used.
I do understand that i can use a smaller JPEG file size to reduce the bloat of the database, but used over hundreds of thousands of images is certainly going to make a dent in my total aperture database size and therefore storage needs down the road.
If you have any other workflow thoughts, or know of a 3rd party plugin/ etc... to fix this obvious shortcoming then i am all ears..
thank you again Leonie and have a great week

The camera raw button in Adobe Bridge has quit working and all my camera raw files are hidden by a c

The Camera Raw button in my Adobe Bridge has quit working and all my raw files are hidden by a cover that says PEF and has a camera raw icon on it. I can open the files in camera raw if I double click on the file but I want to see the files and be able to use the camera raw button. How can I fix it?

This means you have not the correct ACR plug in to support your PEF files or no ACR plug in installed at all.
In photoshop go to the menu Photoshop / About Plug ins / Camera Raw.
Here should be showing the version number of your ACR plug in (only 1 version should show btw)
Then go to this site and check wether your camera is listed and what minimal version you need to open the files:
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html

Corrupted RAW files show in Bridge but not Photoshop?

Hi,
I have recovered some RAW files that were accidently deleted but most of them are corrupt in windows explorer (using recuva). Adobe Bridge can see them but nothing else will open the files (or see them). I really need to edit these files, any help would be appreciated. I'm on win7 64 bit. with adobe bridge cs 5.

What type of RAW files are we talking about, NEF,CR2 or other?
Bridge is just a flle browser, and RAW files are opened and edited in Adobe Camera Raw. Do you just get a thumbnail, but it willl not open in ACR?
Does ACR work with other RAW images that have not been corrupted.
Do you have a backup (highly recommended) of these images somewhere? Should be on seperate physical drive or on a DVD.

I noticed that when I develop in light room 5 that the raw files are larger and the finished product is 80 percent smaller

anybody have an idea why or is that the norm
my raw file was 11,2 and my JPEG was 1.26

The RAW files are the same size as the camera made them. Lightroom doesn't change the file size or image size.
The JPG size depends on a dozen or so things, some of which you can control and some of which you cannot control, but almost always the JPG is smaller than the corresponding RAW.. I see no particular problem with a JPG that is smaller, depending on the export options you chose, and I have never yet seen Lightroom produce an incorrect size JPG
By the way, normally numbers have units, you did not mention any units, so I really can't comment further without knowing the units for the numbers you show

I'm running LR 4.4. Just picked up a Sony RX100 M3 cam. It's RAW files are not supported within my version. Is there a free update still available for my version or do I need to purchase an upgrade to LR5?

I'm running LR 4.4. Just picked up a Sony RX100 M3 cam. It's RAW files are not supported within my version. Is there a free update still available for my version or do I need to purchase an upgrade to LR 5?

Camera Raw plug-in | Supported cameras
The Sony RX100 III was first supported in Lightroom 5.5.
There will be no updates for older versions.
So your choices:
Upgrade to Lightroom 5, or
Download the free Adobe DNG converter, convert all Raw files from the RX100 III to DNG format then edit the DNGs in Lightroom 4.4
Photoshop Help | Digital Negative (DNG)

I have Lightroom 4.4 and a Nikon d800 with firmware upgrade 2.005. raw files are now since upgrade, unreadable. any plugins or advice? Thanks

I have Lightroom 4.4 and a Nikon d800 with firmware upgrade 2.005. raw files are now since upgrade, unreadable. any plugins or advice? Thanks

I select the images I want uploaded, NEF files, click the "IMPORT" button, process bar comes up and shows work in progress, but no progress. after about 2 minutes, dialogue box appears with message: "unable to import because the following files are unreadable: NEFxxxx, etc."

Why are the DNG files from my RW2 raw files are so large (37MB)?

I have a fairly new Panasonic Lumix LX5. I've recently converted a few files to DNG.
They're turning out to be @ 37MB, over three times larger than the original file.
I'm not embedding the original raw files in the DNG.
NEF files I convert from my Nikon D2x are around 9.5MB.
I'm running Mac OS 10.5.8, DNG v 6.6 and also use PS CS5.5 and Lightroom 3.0.
Any ideas??

Thanks R_Kelly!
I was using the DNG converter app.
I just tried converting a RW2 raw file by saving it in from the ACR window in CS5 with your recommended settings:
Compatibility 5.4 and later
Jpeg preview:medium size
without orginal raw file embedded.
This yielded a 9.7MB DNG file. Yeah!!
So I went back and tried a couple using the DNG converter app.
With compatbility set to 4.6 & later, the converted files are 37MB.
But with compatiblity set to 5.4 & later files are 9.7 MB.
This is the same when using either the app or from ACR.
So the difference here is the compatiblity setting.
Does anyone know why this happens??

I'm having trouble converting my RAW files to jpegs. Even though my RAW files are 90MB plus, the jpegs when converted are only around 6MB. Am I doing something wrong? Thanks, A

Dear Forum,
I realise this isn’t necessarily your problem, buy I’m having trouble converting my RAW files to jpegs.
Even though my RAW files are 90MB plus, the jpegs when converted are only around 6MB.
Am I doing something wrong?
Thanks,
A

HHi Barbara, thanks for replying to my post.
No there's nothing wrong with the Jpegs, but I want to srart uploading images for sale in Alamy, but they say they must be a minimum of 17mb un compressed. Does that mean that at 6mb compressed from 90mb they'd be acceptable?
thanks,
alex

Bridge 5.0.2.4 with camera RAW 8.4.0.199 ON a MAC 10.10.1. Trying to update to camera RAW 8.7 to get my canon 7dMK2 raw files to work. But the updater say I have the latest update! Witch I clearly don't have . And my Photoshop have to different camera RAW

Bridge 5.0.2.4 with camera RAW 8.4.0.199 ON a MAC 10.10.1. Trying to update to camera RAW 8.7 to get my canon 7dMK2 raw files to work. But the updater say I have the latest update! Witch I clearly don't have . And my Photoshop have to different camera RAW plug-ins. The old 8.4 and the new 8.7. But it doesn't work. Have removed and reinstalled several times. What is going on? Why can't I update bridge to the latest version 8.7 or read my raw files from the Canon 7dmk2?

Try this:
http://blogs.adobe.com/crawlspace/2011/03/keeping-photoshop-up-to-date.html#notconnected

Please Please Please:let me rating my raw files in the iPad and then sync with LR.

Please Please Please:let me rating my raw files in the iPad and then sync with LR.

definitely the battery wont be the problem.
The important thing is that the IPAD already can see the RAW files;)
would be very useful to make the rating in it.
have the option of cataloging all the pictures of a event
anywhere !!!! even in standing up position
hope I explained correctly (English is not my primary language)
Saludos,
Daviel Taveras
www.vlokstudio.com
RD ( 809 ) 338 - 0001
USA ( 305 ) 305 - 2782
[email protected]

We have loaded office for mac version 2008 on a macbook air, and it prompts to make an account, but then you click to register it recognises it as 2011 version and tells you there is no need to register. we cannot get past this point? anyone else?

we have loaded office for mac version 2008 on a macbook air, and it prompts to make an account, but then you click to register it recognises it as 2011 version and tells you there is no need to register. we cannot get past this point? anyone else?

Yes. The whole process of registering is messed up.
No guarantee this will work, try unistalling and reinstalling. Uninstall has to be done the Microsoft way. Go to Applications / MO 2008 / Additonal Tools / Remove Office / Remove Office.
Then reinstall the usual way. This might work.

I just updated the OS to 10.6.8 but then i never get the app store that supposed to be included in the update. so now, how can i download the app store?

i just updated the OS to 10.6.8 but then i never get the app store that supposed to be included in the update. so now, how can i download the app store?

Hi,
Have you tried a Restart since doing the Update...?
If Yes and you still don't have it...
Download and Install the 10 6 8 Combo Update from here
http://support.apple.com/kb/DL1399
Cheers,

After I order a calendar, it is assembled and it keeps asking me to update my account information. I have done so 5x, but then it never finishes and tells me it has been ordered. I am using iPhoto 9.

When I attempt to purchase a calendar, it is assembled. Then it keeps asking me to update my account information. I have done so 5x and said ok, but then it never finishes and tells me the calendar has been ordered. I am using iPhoto 9.

and did you
Go to your account in the Apple store (store.apple.com) and re-enter all of your information,
LN

RAW files are often unnecessary, but then, you never know.

Similar Messages

Maybe you are looking for