RAW Files Viewing & Not Viewing in Same Version of Bridge

Hi
I have Adobe Photoshop CS3 on my computer at home and in school each with Adobe Bridge (both bought at the same time so same version).
My computer at home allows me to view Raw Nikon NEF files from my Nikon D90 and Nikon Coolpix P6000 cameras in Adobe Bridge.
My computer at school does not allow me to view these files in Adobe Bridge, only displaying them as icons.
Also, the clarity slider on the basic tab of Camera Raw is present on my computer at home, but not on my computer at school.
Any solutions / explanations to this would be gratefully received.
Many thanks
Carl

it sounds as though you need to install/update the camera raw element of bridge/photoshop installed on the school pc.
easily achieved by an auto update.
you will need this update to view the latest raw files.

Similar Messages

I'm running LR 4.4. Just picked up a Sony RX100 M3 cam. It's RAW files are not supported within my version. Is there a free update still available for my version or do I need to purchase an upgrade to LR5?

I'm running LR 4.4. Just picked up a Sony RX100 M3 cam. It's RAW files are not supported within my version. Is there a free update still available for my version or do I need to purchase an upgrade to LR 5?

Camera Raw plug-in | Supported cameras
The Sony RX100 III was first supported in Lightroom 5.5.
There will be no updates for older versions.
So your choices:
Upgrade to Lightroom 5, or
Download the free Adobe DNG converter, convert all Raw files from the RX100 III to DNG format then edit the DNGs in Lightroom 4.4
Photoshop Help | Digital Negative (DNG)

Hi, photoshop crashed and the file I was previously working in on the same version says Could not complete your request because the file is not compatible with this version of Photoshop. I'll appreciate any help. Thank you.

hi, photoshop crashed and the file I was previously working in, on the same version of Photoshop says "Could not complete your request because the file is not compatible with this version of Photoshop." I'll appreciate any help. Thank you.

CR2 files from which Canon camera?
Supported cameras are listed here
Camera Raw plug-in | Supported cameras

The file is not compatible with this version of photoshop / CS2 error -- Same File : CS6 no error / CS2 error , I need trouble shooting method, Please

the file is not compatible with this version of photoshop / CS2 error -- Same File : CS6 no error / CS2 error , I need trouble shooting method, Please

Save with Maximize Compatibility in CS6.
Choose Edit > Preferences > File Handling (Windows) or Photoshop > Preferences > File Handling (Mac OS).
From the Maximize PSD and PSB File Compatibility menu, choose any of the following:
Always
Then re-save your file so it can open in CS2

Windows desktop application -- version of this file is not compatible with the version of Windows you're running

I am developing on 64-bit Windows7 Enterprise using VisualStudio 2013. I created a new Windows desktop VB.net application and just created a release build of the default solution/project targeting "Any CPU". I provided the EXE to a
colleague who is also running 64-bit Windows7 Enterprise but receives the following error...
"The version of this file is not compatible with the version of Windows you're running. Check your computer's system information to see
whether you need an x86 (32-bit) or x64 (64-bit) version of the program, and then contact the software publisher."
I changed the build configuration to create a "x86" build but my colleague received the same error. Any ideas why this would be happening (I checked and my colleague has .Net4 Framework installed as well)? Thank you for your time and
response!
Sunish Abraham
"The version of this file is not compatible with the version of Windows you're running.
Check your computer's system information to see whether you need an x86 (32-bit) or x64 (64-bit) version of the program, and then contact the software publisher."

Hi sunisha,
According to your description, you'd like to run the application in your colleague's computer.
I provided the EXE to a colleague who is also running 64-bit Windows7 Enterprise but receives the following error...
If you want to test the application, you could provide the whole Debug folder to colleague instead of the single exe.
"The version of this file is not compatible with the version of Windows you're running. Check your computer's system information to see whether you need an x86 (32-bit) or x64 (64-bit) version of the program, and then contact the software publisher."
Check if the collegue's computer is running 64-bit windows:
Enter Control Panel, click on System and Security.
Under this, you can view the system type. This will describe whether you have 32-bit or 64-bit.
You can also try compatiblity mode.
If the program is not compatible, then you may try to install and run the program in compatibility mode.
Use the following steps:
1)   Right click on the Program
2)   Click on Properties
3)   Click on Compatibility tab
4)   Select Run this program in compatibility mode and select Windows Vista or whatever operating system the program was running successfully.
And if you still have questions, I suggest you deploy the application to the Local Network with clickOnce, then your collegue can install the application from the network.
#ClickOnce deployment
http://msdn.microsoft.com/en-us/library/t71a733d(VS.80).aspx
And also, you could recreate a new small application in your computer in Any CPU, then check if this small new application can work well in your colleague's computer. This can judge if the problem is caused by your application.
If you have any other concern regarding this issue, please feel free to let me know.
Best regards,
Youjun Tang
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

JAR resources in JNLP file are not signed by same certificate

I am running my application under Java Web Start with different jars signed. I following the advances use multiple JAR files in JNLP files below.
But i message error "+*JAR resources in JNLP file are not signed by same certificate*+" is posted still.
Could you please help me to solve it?
Thanks
Best Regards,
Tuan Pham
index.jnlp_
+<?xml version="1.0" encoding="utf-8"?>+
+<jnlp spec="1.0+" codebase="http://localhost:8080/quotationsys" href="index.jnlp">
+<information>+
+<title>File Viewer</title>+
+<vendor>IBM developerWorks</vendor>+
+<homepage href="index.html"/>+
+<description>File Viewer</description>+
+<description kind="short">File Viewer</description>+
+</information>+
+<security>+
+<all-permissions/>+
+</security>+
+<resources>+
+<j2se version="1.5.0_*" />+
+<jar href="quotationsys.jar"/>+
+<nativelib href="swt-lib.jar"/>+
+<jar href="swt.jar"/>+
+<extension href="extlib.jnlp"/>+
+</resources>+
+<application-desc main-class="layout.MainMenu"/>+
+</jnlp>+
extlib.jnlp_
+<?xml version="1.0" encoding="utf-8"?>+
+<jnlp spec="1.0+" codebase="http://localhost:8080/quotationsys" href="index.jnlp">
+<information>+
+<title>File Viewer</title>+
+<vendor>IBM developerWorks</vendor>+
+<homepage href="index.html"/>+
+<description>File Viewer</description>+
+<description kind="short">File Viewer</description>+
+</information>+
+<security>+
+<all-permissions/>+
+</security>+
+<resources>+
<jar href="cvom.jar"/>
<jar href="CrystalReportsRuntime.jar"/>
<jar href="CrystalCommon2.jar"/>
<jar href="DatabaseConnectors.jar"/>
<jar href="JDBInterface.jar"/>
<jar href="keycodeDecoder.jar"/>
<jar href="pfjgraphics.jar"/>
<jar href="QueryBuilder.jar"/>
<jar href="commons-collections-3.1.jar"/>
<jar href="commons-configuration-1.2.jar"/>
<jar href="commons-lang-2.1.jar"/>
<jar href="commons-logging.jar"/>
<jar href="com.ibm.icu_3.8.1.v20080530.jar"/>
<jar href="log4j.jar"/>
<jar href="xpp3.jar"/>
<jar href="jai_imageio.jar"/>
<jar href="logging.jar"/>
<jar href="com.azalea.ufl.barcode.1.0.jar"/>
+</resources>+
+<component-desc/>+
+</jnlp>+
Edited by: pttuan on Apr 13, 2009 1:55 AM

Are all of the jars in extlib.jnlp signed by the same cert? I think that the extension mechanism lets you get around having all of the jars for an overall app have the same signer, but I think it's still required that all of the jars within a given jnlp file have to have the same signer. So for you, all the jars in index.jnlp have to be signed by "cert A" and all the jars in extlib.jnlp have to be signed by "cert B". If that's not the case, you may need to split it up into multiple extensions.

Could not complete your request the file is not compatible with this version of Photoshop.

User has been working on a photoshop document for a whole day, when they came to open it the next day the were presented with the error message could not complete your request the file is not compatible with this version of Photoshop.
The file has been saved locally and hard drive and RAM are working as they should. Does anybody else have any idea to the cause of this problem. the file is 582MB in size. Any help would be greatly appreciated.

Sounds like it's corrupt.
Have you any backups or other versions?
http://windows.microsoft.com/en-ie/windows/previous-versions-files-faq#1TC=windows-7
OS X Mountain Lion: View and restore past versions of documents
This might help
http://hardcorerikki.deviantart.com/journal/Saving-your-corrupt-PSD-files-and-job-21415717 1

I can't open my photo's in Bridge because the camera (Canon EOS D650) RAW file is not recognized?

Ik kan in Bridge mijn foto's via photodownloader niet openen omdat RAW bestand van camera (Canon EOS 650D) niet ondersteund wordt, ook niet na updates?

Beste,
Ik heb Photoshop CS6, maar blijkbaar wordt mijn camera Canon EOS D650 niet ondersteund.
Mvg,
Op 14-jan-2015, om 21:39 heeft Ronald Keller het volgende geschreven:
I can't open my photo's in Bridge because the camera (Canon EOS D650) RAW file is not recognized?
created by Ronald Keller in Bridge General Discussion - View the full discussion
Welke versie van Photoshop heb je? Voor die camera heb je minstens CS6 nodig.
Camera Raw-compatible Adobe applications
Camera Raw plug-in | Supported cameras
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7096583#7096583 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7096583#7096583
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Bridge General Discussion by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

PSD error: "Could not complete your request because the file is not compatible with this version of Photoshop"

Help needed, encountered this error while opening psd file.
the psd file is created in CS5, tried to open it in CS3 because it said "...the file is not compatible with this version of Photoshop", i got the same error message in CS5
tried to open it at Firework CS6 (got the idea from Re: Recovering Crashed PSD file) but it give me error message "Could not open the file. An internal error occured"
is there any way to recover the file?
it's for my mid-semester score
thank you in advance

Hi gener7,
i've uploaded the file and sent you the link
thank you very much for the help.

Error message: File is not compatible with this version of Photoshop

When I try and reopen a psd file I have created, I get the message "Could not complete your request because the file is not compatible with this version of Photoshop"
Used to get this on occasional files using CS2, have now started getting it on CS3 files. The only way to get round it is to redo the work!
Am using Photoshop CS3, V.10 on a G5, OSX 10.4.11. Which is connected to a PC network.

Ran into the same message on files created by one of our designers. His computer needed a "cleansing" to stop corrupting files. Files were actually being corrupted locally, so it wasn't only a server issue...at least in our case. One thing that we did that "sort of" worked...we transferred the file to a PC and ran a shareware utility that repairs PSDs (Advanced PSD Repair Software). It said it repaired the file successfully, BUT it separated the files into a couple of hundred individual documents. Each layer and layer mask was a separate file. I didn't see any setting to recover as a composed file so I guess this is just how it works. If your file is not heavily layered and complex, I guess this might work for you, but, like I told the designer, I ain't goin' in there and reconstructing your layers. =) I know this doesn't help if you don't have access to a PC with Photoshop loaded in it, but thought this might help some poor soul along the way. Good luck...

File is not compatible with this version of Photoshop.

I have seen several other posts with this same issue but have not been able to find/see any resolution. I am trying to open a .psd file and receive the error:
In case the image above does not display "Could not complete your request because the file is not compatible with this version of Photoshop."
Of course, this file is an "Approved Design" for a client and will take days to rebuild. All of the other files I worked on during the same time period are just fine.
I have tried:
     Deleting Preferences
     Clearing Preferences
     Setting to "Ignored EXIF profile tag"
My System Specs:
Intel XEON E345 @ 2.33GHz (Dual)
12.0 GB RAM
64-bit Windows 7
Photoshop is set to use 7780 MB for RAM (71%)
I have 4 disks assigned for scratch disk access and my OS drive is not the primary scratch drive, total of close to 500GB space for scratch.
PLEASE, please, please help!! I hope there is a way to repair/get this file open....

Generally speaking, Photoshop is not known to destroy files. The problem, as implied above, is more likely a basic problem with your computer.
You can check your Windows event logs to see if you find disk errors.
-Noel

I just bought the Nikon D750 and my raw files will not open in CC Photoshop. Is anyone else that has this camera experienced this problem?

I just bought the Nikon D750 and my raw files will not open in CC Photoshop. Is anyone else that has this camera experienced this problem?
My Photoshop says it is up to date, but I am hoping that since this camera just came out, Adobe will have an raw file update soon.

DNG Converter is FREE. Yes, really. No subscription needed.
- Baloney, NOT FREE, it's a proprietary software, not open AT ALL, see Legal Notices, so stop trying to distort the truth here.
Camera Raw (& DNG Converter) 8.7RC has been available since 2nd October, and opens D750 files in Photoshop & Bridge (& Lightroom using DNG Converter).
Adobe Photoshop Camera Raw 8.7 Release Candidate | digital camera raw file support - Adobe Labs
- Still a cumbersome process for this of us that PAID for software and support, the whole point of this discussion is to implement this directly on LR, so we, the PAYING users don't have to waste time doing a useless process that could be EASILY AVOIDED ig Adobe released updates as they are needed, or if they OPENED THE SOURCE CODE so the community could do it.
Adobe created DNG, which is a well-documented backwards-compatible format, which is free for any manufacturer to use.
See here for manufacturers who do (it's an old list, but you get the idea):
http://www.barrypearson.co.uk/articles/dng/products_cameras.htm
- Really? Did you actually read the site? It has PRECIOUS information that illustrate my point: Adobe DNG is an attempt to stop the OpenSource community from achieving the goals of OpenRaw, which is TRUE OPENNESS, Again, Adobe is trying to get manufacturers to PAY LICENSING so they use a PROPRIETARY FORMAT that will HOLD CUSTOMERS on a PAID platform. OpenRaw is he answer for a true competitive environment.
Ask yourself why other manufacturers don't use a documented backwards-compatible format.
- Easy, because they are lazy and want kick-back. The SAME answer that I (and the entire OS community) would give if you asked about Acrobat or MS Office.
If you use a particular piece of software as your main tool, and you buy a camera which isn't yet supported by it, it's your problem. There is an expression used in the industry:
"Poor Planning on your part does not constitute an Emergency on my part."
- I agree here, it's MY PROBLEM that I decided to have a better product, it was my choice. I can still use OS Tools, which will be what I do moving forward, and about that expression, that is EXACTLY why Adobe will keep loosing customers, because the sense of urgency to help who pays their bills is inexistent. You are correct, why should they rush something so simple to help a customer right? Screw the customer... Thanks for making my point...

How do i fix this, i have only been using Photoshop elements 11 on my computer, now it's saying ' could not complete your request because file is not compatible with this version of Photoshop Elements' BUT I HAVE ONLY BEEN USING THIS PHOTOSHOP.

Photoshop Elements 11
Only Been using it
saying ' could not complete your request because file is not compatible with this version of Photoshop Elements'
What do i do

Which operating system are you running on?
Do you get this error when loading or using the organizer or the editor?
What are you trying to do when you get this error?
If you are using raw files, which camera (make and model) do you use to create the raw files?
If you can load the editor, which version of camera raw do you have loaded? - see Help -> about Plug-in -> Camera raw
Brian

How to save metadatas in RAW files (and not in external .XMP sidecar file)

Hello,
I would like to save metadatas (for example keywords) inside the RAW files, and not in external .XMP sidecar file.
How to do this in Lightroom ?
Thanks
Josh
PS: is XMP a file format (= .XMP files) or a metadata format that can be embedded either in a .XMP sidecar file or in the RAW itself ?

MarvinFoster wrote:
It's a horridly named catalog setting since if you are using DNG you don't have XMP files but it does the same thing, it updates the dng with the catalog settings.
XMP does not mean XMP FILES per se.
XMP is a metadata format/standard. so it´s not horrible named but simply missunderstood.
http://en.wikipedia.org/wiki/Extensible_Metadata_Platform
XMP can be used in several file formats such as PDF, JPEG, JPEG 2000, JPEG XR, GIF, PNG, HTML, TIFF, Adobe Illustrator, PSD, MP3, MP4, Audio Video Interleave, WAV, RF64, Audio Interchange File Format, PostScript, Encapsulated PostScript, and proposed for DjVu. In a typical edited JPEG file, XMP information is typically included alongside Exif and IPTC Information Interchange Model data.

My Nikon 7100 RAW files will not load into Iphoto.

My Nikon 7100 RAW files will not load into IPhoto. The computer will recognize the files once the download is complete, but fails to finalize. My version of IPhoto is 7.1.5 and my computer is a Mid 2007 Mac Mini Model. I have Light Room 5, but my wife and I are prefer IPhoto for basic download and sharing. Is there a possibility of getting the RAW files to download ?

what version of the OS?
You need Mt Lion and iPhoto '09 for your camera RAW support - OS X Mountain Lion: Supported digital camera RAW formats -
If your computer will support tMavericks do the free upgrade to it and purchase the upgrade to iPhoto '11 version 9.5.x in the App store
LN

RAW Files Viewing & Not Viewing in Same Version of Bridge

Similar Messages

Maybe you are looking for