RAW has (almost) gone! CS3/ Windows

A problem has arisen on my PhotoShop CS3 and Bridge.My setup used to work perfectly. Suddenly the option to open any RAW or JPEGS in ACR either on the right click menu or on File> open has vanished. I have tried some of the fixes on other threads to no avail. ACR exists, as I can opt under prefs to open JPEGS in ACR and if I then open a jpeg it opens in RAW but it will not open a RAW file from bridge.
Any ideas would be appreciated.
John

Thanks and sorry fort he lack of info...
Points in PEC's Post:
tell us what raw file is problematic: *.cwr (Canon)
what is the version of Bridge: 2.1.0.100
ACR: 4.2
if you purged the folder: yes
where is ACR installed: C:\Program Files\Common Files\Adobe\Plug-ins\CS3\File Formats
if you are sure that there is only one version:yes
what change you made recently on your machine. Only added a usb external hard drive and installed Norton Ghost (a backup prog)
I trashed and rebuilt the Pref file but no change
Thanks for your interest
John

Similar Messages

Firefox has suddenly gone wrong. I was successfully running both Firefox and Internet Explorer 8 on Windows 7. I auto-accept upgrades including the most recent Firefox upgrade and the suggested upgrade to Adobe Flash 10.1. But after this, Firefox stopped

Firefox has suddenly gone wrong. I was successfully running both Firefox and Internet Explorer 8 on Windows 7. My laptop is new and has plenty of RAM and HDD. I auto-accept upgrades including the most recent Firefox upgrade and the suggested upgrade to Adobe Flash 10.1. But after this, Firefox stopped working and does not work when I re-load Firefox 3.6. Also IE8 now works very slowly and does not locate major websites like Microsoft without a 'can't find the website message' and having to pressing Return a second time. When I do get to the Mozilla website and click on the button to try to download Firefox 3.6.6, I get this message "Oops! Internet Explorer could not find mozilla3.snt.utwente.nl". Can you help with what has gone wrong? As it stands, I can't use Firefox at all. Note: because Firefox did not work after the upgrade, I've downloaded the IE8 version of the Adobe Flash 10.1. What I really want is to be able to use both Firefox and IE8. But is this possible if they use different versions of Adobe Flash?
== This happened ==
Every time Firefox opened
== About 2-3 days ago ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; GTB6.5; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; Tablet PC 2.0; .NET4.0C)

I have been having the same problem as the original poster. After upgrading to Ffx 3.6.6, the program asks you to upgrade to Flash Player Plugin 10.1. I download and installed 10.1 only to find videos weren't loading.
In my case, the problem is the previous installation of Flash Player (9.0.47) was somehow messing things up. To fix this, because I already had Flash plugin 10.1 installed I had to uninstall 10.1 using the uninstaller from adobe and then manually remove any files related the old flash player plugin 9.0.47
Here is a run-down of my process:
0. To check if you have a previous installation of the Flash Plugin lurking around, in Firefox go to Tools -> Add-ons -> Plugins (tab). At this point you may seen both Flash plugins.
1. Proceed to uninstall Flash Plugin 10.1. Adobe provides an uninstaller here: http://kb2.adobe.com/cps/141/tn_14157.html
( you have to make sure you have nothing running when you execute the installer).
2. On my Mac (sorry I don't know what it is in Windows) I searched the hard drive for any files/folders with "Shockwave". I found a folder called "Shockwave 10". It wasn't removed by Adobe's uninstaller. For safety I deleted it and then emptied the trash.
3. I then went to My HD -> Library -> Internet Plugins.
Remove the file and folder named "Flash player.old"
4. Restarted; ran the Adobe Flash Player 10.1 installer. Restarted again.
5. Opened up ffx and double checked the plugins list (see step 1). Version 10.1 is installed and available. Went to problem sites to test it out and Success!
Hope this helps.

Where has my airport utility window gone ? when I double click on the icon all I get is an image of a globe and a base station with no options to make changes in my airport extreme.

Where has my airport utility window gone? When I double click on the airport utility icon all I get is a picture of a globe and a base station with no further options available to modify my airport extreme.

Sorry, you lost me on that last post.
Let's start over again.
Open AirPort Utility on your Mac
Are you asked for a password at this point? If yes, enter the base station or device password that you used when you originally set up the AirPort router. Depending when you did this originally, you might have been given an option to use the same password as the wireless network. If you were not, then you have a separate password for the base station.
You need that password to be able to access the settings for the AirPort router in AirPort Utility.
If you see a window listing basic information, click Edit in the upper right corner of the window.
If you are asked for a password, you must enter the device password or base station password that you established when you first set up the AirPort router as explained above.
If you forgot the password, a Soft Reset will allow you to go in and reset the base station password. Might be a good idea to write down that password.
If you are still stuck, then the only option that you have at this point is to perform a Hard Reset to return the settings to factory defaults and then set up the AirPort router again.
If you prefer, you can also do a Factory Default Reset. It's the same as a Hard Reset except for the timing of holding in the reset button.

Can't Open .NEF Files In Camera Raw CS3 - Windows 7

I have a Nikon D60, Windows 7 Professional (32bit) and Web Premium CS3.
I recently upgraded from XP to Windows 7.
I cannot get my Nikon's .NEF (Camera Raw) files to open when I select "Open in Camera Raw". I can see the .NEF thumbnails, but neither Photoshop or Bridge will open the files in Raw, you know where you can adjust all those killer settings non destructively.
I had cs3 installed on an XP machine and my .NEF files worked perfectly in Raw. Not so in Windows 7. I have tried to update to Camera Raw 5.6 but that wouldn't install. Is there an earlier version of CR that I can get and use, or any other advice would help.
Thanks

The last version of Camera Raw to work in Photoshop CS3 is version 4.6. If you HAD been able to open your D60 NEF files and now can not, then something changed...did you do a fresh install of CS3 under Win 7? If so you installed version 4.0 (what shipped with CS3). You'll need to go to the Camera Raw Updates for Windows and download an install version 4.6.

My macbook air (version 10.9.4) display flickers, has random tabs and windows opening, and there are random ads almost everywhere. All this happens when I am using safari. What can I do?

My macbook air (version 10.9.4) display flickers, has random tabs and windows opening, and there are random ads almost everywhere. All this happens when I am using safari. What can I do?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/(de|[nst]):/p;' ' {sub(/^ +/,"")};/r:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,Inter,iTu,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

F12 - Preview in browser - has is gone is CS3?

Hi
took the plunge and upgrades to cs3 from studio - so far so
good - a few
long hangs, no shortcuts on the desktop when its installed
and blimey it
tooks hours to install....
anyway back to my point - hit f12 to preview in browser and
nothing happens
as it used to open a preview of the png in your prefered
browsers.
i have check the prefrences and the help docs but i cant find
any mention of
it - has it gone in CS3?
as ever
keen to learn..

Hi JoeyD1978 and Howard
thanks for the info, it could be a keyboard issue as you
suggested as i am
working froma laptop docking keyboard (Logitech Alto)
thanks for your help
as ever
keen to learn..
"Howard Heflin" <[email protected]>
wrote in message
news:f323la$8s6$[email protected]..
> Keen to Learn wrote:
>> Hi
>>
>> took the plunge and upgrades to cs3 from studio - so
far so good - a few
>> long hangs, no shortcuts on the desktop when its
installed and blimey it
>> tooks hours to install....
>>
>> anyway back to my point - hit f12 to preview in
browser and nothing
>> happens as it used to open a preview of the png in
your prefered
>> browsers.
>>
>> i have check the prefrences and the help docs but i
cant find any mention
>> of it - has it gone in CS3?
>>
>> as ever
>> keen to learn..
>
> Keen,
> I ran into a similar problem when I installed a new
keyboard and found
> that I had unset the F Key Lock button.
>
> Just a thought. ;-)
> Howard

Import Premiere Pro CS3 Windows projects into Premiere Pro CS5 Mac.

Hi there people. I hope you can help me. I have had premiere pro CS3 on my windows system for some years but now run a Mac with Master Collection CS5, my problem is that my existing prproj files on windows format do not open in CS5 Premiere Pro for Mac, I get a message telling me that I need to see the user guide for importing options, I have tried to do so, but there is no information about how to do this.
Can anyone here please tell me how to get around this, as I need to rework some of these old windows projects however my old windows system is totally dead now so I cannot open the files in the CS3 windows version either.
Please help, oh and spare me the useless windows vs. mac arguments.
I hope someone here can help
Thanks

Since you are trying to Open a CS3 PC Project, you should not have THAT many issues in CS5 Mac. Have you tried both the Open and Import - similar but different operations? Have both methods failed?
One possible problem would be the Effects & Transitions used in the CS3 PC Project. Here is a LIST of the Transitions and Effects in CS4 for the PC, that are missing in the Mac version. I would assume that CS3 and CS5 would be similar. However, in similar cases, PrPro has thrown a more specific error message. I have only Opened Pr 6.5 Mac Projects into PrPro 2.0 PC, and these have been almost perfect. Where there were missing Transitions, I got a very explicit message, telling me what had been used that was missing from my program, and exactly where the problem existed (specific TimeCode). In my case, two Transitions just did not exist in my PrPro 2.0, and one was a 3rd party Transition, or Effect, and I did not have that. Still, the older Mac Projects Opened fine, and I just made note of where I would need to make changes. I would anticipate that similar would occur, if the Mac version did not have some Transition, or Effect, but do not know specifically. Still, based on the warning messages that I got, with such complete documentation, I'd expect similar.
Now another consideration - Assets. If there are Assets that you cannot work with on your Mac, say DV-AVI, or WMV, those would likely throw an error. Again, I would expect that error message to elaborate a bit more.
Do you know the details of your CS3 Projects and their Assets? Anything that you can think of there?
Just thinking here, and unfortunately, I have never gone the direction that you are going, and with the versions that you are working with, so something simple and glaring (to others) might just be slipping past me.
Good luck, and maybe others will have much better input on your issue. Also - welcome to the forum!
Hunt

Bridge CS3 (Windows XP) fails to start because Symlib.dll was not found

Bridge CS3 (Windows XP) fails to start because Symlib.dll was not found? How do I fix this? I've re-installed and the auto updater has run...I even downloaded and ran the patcher application? By the way Bridge CS3 doesn't show up in the CS3 program list in the start menu but it is installed in my program files - I've tried launching it directly from there as well. Bridge CS2 is operating just fine.
Update: I installed and ran the Adobe Support Advisor, resulting in - Issues: "The module found no solutions to report for the selected log file."
I tried to package the report and the error read: "The size of the package is too large to be handled with the current configuration! Please contact Adobe Support for additional information."
I opened a web based report/case number at the Adobe Support Portal about the missing Symlib.dll (including the Adobe Support Advisor error). Their response was: We regret to inform you that complimentary support for your product is not available and/or has expired.

Did Bridge work before? If so, reset preferences by holding down the Ctrl key when starting Bridge. If successful you will get a Reset Window, choose all 3 options.

My macbook pro's screen display has suddenly gone into a strange colour setting where everything appears in a kind of infrared colour palette an I can;t seem to change it back. It's the same for all icon and websites, does anyone know how to restore?

My macbook pro's screen display has suddenly gone into a strange colour setting where everything appears in a kind of infrared colour palette an I can;t seem to change it back. It's the same for all icon and websites, does anyone know how to restore?

Wow! I think I had this same issue just last night.
I was cleaning my macbook pro retina on the outside. Then I opened it up and was wiping dust off the monitor and I can't pinpoint exactly when, but the colors changed suddenly. It looked super strange, it was like green halo's and it looked worse when looking at it at an angle. Of course I took no pictures!!! I was freaking out that my 2 grand laptop was busted and I somehow removed a protective film or something.
But I digress... The image looked very green and spacey, it was almost a neat effect. After about 5 minutes it started to look a little more digital though. There were straight lines of this halo effect on the edges and top. After about 10 minutes it turned into a predominate issue with the blacks on screen. I could open a web browser and it was unnoticable on a white background. After about 15 minutes, you could only barely see the green cloud effect if you looked at the monitor from an extreme angle. After about 20 minutes, it was completely back to normal, I almost feel paranoid like I see a halo or something strange. But I believe that might be all in my head now.
So yerp, lemme know what you guys figure out.

Howto update Camera Raw in Photoshop CS6 on Windows Vista

Hi there,
i am trying to update the Camera Raw Plugin in Photoshop CS6 to the latest supported version 8.3 but i can not make it work...
What i want?
I want to view the RW2 Raw files from my Lumix GX7 in Photoshop CS6 and Bridge.
Lumix GX7 needs minimum Camera Raw 8.2 as of this site Camera Raw plug-in | Supported cameras
Camera Raw 8.3 is supported for CS6 as of this site Camera Raw-compatible Adobe applications
I found this link Keeping Photoshop Up-To-Date but there is only the latest version 8.6 available which does not support Windows Vista.
On this site Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.4 there is only the DNG Converter available.
Help Information in Photoshop shows Camera Raw 7.0 installed and now updated available (up to date).
The only other file i found was Camera Raw 8.5 here Camera Raw updates cannot be applied but does not help me either...
Has someone solved this problem before and could tell me how? Am i missing some hidden option to make the update work?
Greetings from Germany

You've tried Help>Updates from within photoshop cs6?
Or this 8.3 updater
http://swupdl.adobe.com/updates/oobe/aam20/win/PhotoshopCameraRaw7-7.0/8.3.52/setup.zip
If that doesn't work, you can install camera raw 8.3 by following the directions on the following page
Adobe Camera Raw Help | Camera Raw/DNG Converter 8.4 on Mac OS 10.6, Windows XP, and Vista

Get error "Firefox has stopped working" under Windows 7

I'm running Firefox 3.6.10 (just upgraded, I was at 3.6.9) and every so often (maybe 1-2 days), Windows 7 decides to crash it with the error "Firefox has stopped working". Firefox itself does not seem to be generating a crash id, which is disappointing since that way it would be reported. I run a LOT of tabs, at the moment I have around 100 open. I notice that the CPU usage seems to get very high (it shows 25% for me, but I have a quad core machine so I guess that is 100% of one CPU) as well as memory (1.5gb). It's almost as though Windows thinks that Firefox has stopped responding because of the high CPU usage and decides to terminate it.
I've seen some posts here reporting similar problems, but no resolutions. I also saw a post elsewhere suggesting disabling throttling in Windows but saw other posts saying that had not solved the problem.
Any suggestions on how to fix or troubleshoot this problem?

I have this problem too. Now i'm using win7 64 bit, i installed the newest firefox 6.0.2 and yahoo messenger 11 -> i got this problem. First time i think this is a firefox's error. I decide to use process hacker (a mini tool to manager running process) to find out what is happening and i found this: the program name "YahooMessger!.exe" run a few second and it calls the firefox crash popup lol. I uninstall the firefox and i see "YahooMessger!.exe" auto run in process hacker! ^^ conclusion: i uninstall Yahoo Messenger 11 and delete two folder of yahoo in my username's document (1 of them have the program "YahooMessger!.exe"), reinstall firefox and get out this problem!
So my question is: what is "YahooMessger!.exe", is it a yahoo's part, is it a spyware or virus? Here is the link of this file, i have archived it with winrar http://www.mediafire.com/?lf8tc9fal5rxlup

I am using iphone 3gs and have accidentally clicked "update" to software version 5. However, after I failed and all my data was lost. I manage to restore back to my previous situation. But all my apps has been gone. How can I get back all my aps?

I am using iphone 3gs and have accidentally clicked "update" to software version 5. However, after I failed and all my data was lost. I manage to restore back to my previous situation. But all my apps has been gone. How can I get back all my aps? I know I can get it by itunes but there are a few problems as below:
1. I have jailed break my iphone and I never purchased any apps from itunes
2. I have some important infomation saved in one of the apps called "awesome notes". How can I get it back? Is it store inside my computer? if so, how can i restore?
3. I am using window 7
I sincerely hope you guys can help me.
Regards,
Stephen Hong

alrite. I have made my mistake. I should not jail break my iphone. So if I purchase my apps again from itunes is that mean mean my data will be back?
I hope you guys can giv me some support here since I am Apple genuine buyer. I could be wrong last time and now I turn over a new leaf and learn a lesson.
Please noted that I can always create new account to ask for the same questions without mention about "jailbreak" if I want to but obviously I won't do that. Please provide me your support! Thank you!

Windows boot manager boots almost fully into windows 8 before letting me select windows 7, at which point it reboots my computer

Hi,
I haven't used my slow HDD with windows 7 on it in a while, but today my SDD with windows 8 on it died. I have kept my old OS in a dual boot setup exactly for this rare possibility. I in fact successfully revived my SSD from windows 7.
During the restore procedure I had to boot into both OSes (7 and 8) several times before I managed to get 8 working. I tried a lot of things before one of them struck. (Is that how the phrase goes?
Me Hungary, no good speak English some times...) I am surprised to have found the following unexpected behavior of the new windows 8 branded boot loader:
The new windows boot manager boots almost fully into windows 8 before letting me select an OS.
If I select windows 7, it reboots my computer and loads windows 7, wasting a lot of time... on the windows 8 portion of the boot process, which is simply thrown away if I happen need windows 7 and not 8.
"This is highly inefficient!" — I almost exclaimed aloud... A boot manager should load just enough of itself so that a simple OS selection menu can be presented to the user with minimal keyboard interaction. Only when a selection is made should
it load an OS. I have no use for the new boot manager's mouse control support, and having it appear on the second screen in my dual screen setup is just plain scary. Use the main laptop monitor where the BIOS messages were displaying, and keep the secondary
off until the OS is done booting! By the time my secondary screen turns on, the boot selection menu disappears anyway.
Yes, I only noticed this problem now because I haven't booted into windows 7 for a long time. (300 MB worth of Windows updates were waiting for me indeed.) My boot selection menu timeout is set to 3 seconds instead of 30 so I don't have to pick windows 8
every time.
I am going to wait at least a week for the forum's input before I switch on my own to a faster, minimalist boot manager. I don't know what to use, I'm familiar with:
some minimalist bootstrap loaders
coreboot/linuxbios (recently learned of it)
bootcamp (not really)
acronis OS selector (discontinued before windows 8 came out, probably doesn't support it)
syslinux/isolinux (Linux only, I think)
old Windows bootmgr
more recent Windows ntldr
then this new "inefficient for dual booting" Windows 8 boot manager
and finally grub
Grub feels like the best option as it keeps the windows boot manager intact and supports mac, windows, and linux. All 3 of which will at one point — or has already — come up as a subject or prerequisite in my university.
I don't know how or why I was able to access windows 8's boot loader while my SSD was dead. Was it installed on the HDD, overwriting the windows 7 boot loader? That too is inefficient. I want to completely boot from my SSD. Don't spin up my HDD while I'm
booting my laptop on the go! The shaking of the vehicle I'm in could seriously damage the disk if I run into a pothole (common in my country) with just the right timing, data could be damaged. The entire reason windows 8 is on an SSD is so that it can boot
without accessing my HDD with all its moving parts. My goal with buying an SSD was for the HDD to remain safely offline while I'm in a shaky environment with potholes! Also, what if I want to disconnect the old HDD in the future... Or what if it dies? Will
the windows 8 boot loader die with windows 7? I want the two kept separately and completely independent from each other for exactly this reason.
In summary:
How can I stop windows 8 from almost fully booting before offering the dual boot OS selection menu? Do I need a better Boot loader?
Why was the boot loader that came with windows 8 still working OK while the SSD with windows 8 on it wasn't accessible? Did it sneak its way onto the old HDD? I want a 100% SSD-based boot process. What is the boot loader doing on a different drive? Its
place is on the SSD, with the operating system it belongs to. Not on the HDD of a different OS. Can I move it?
Sincerely,
Daniel "3ICE" Berezvai
p.s.: For windows 7 I only have a repair disk and hidden RECOVERY partition which I kept (came with the laptop, would rather not use it.) The Windows 8 pro DVD (purchased last year) is fine, but I had it moved to a bootable pendrive so I could remove my
optical drive and replace it with an SSD on which windows 8 is installed now. (I also have a vista ultimate DVD, as they were giving them away for free on a Microsoft conference. Funny story.)
p.p.s.: I am subscribed (☑ Alert me) to this topic and will respond to all questions and try all recommended actions right away.
http://3ice.hu/

Hi,
Thank you for your post.
From your description, I see the issue you are facing is there is no menu to choose OS when booting dual boot(Windows 7 & Windows 8). Please let me know if I have misunderstood anything.
It seems that the Windows 7 entry is missing, currently, we can use a tool –
EasyBCD to get it back. After downloading it, choose the Add/Edit panel item, select the OS you're missing and let the program detect it. Then simply click the Add button to add the missing OS entry.
At the meantime, here is a related link which demonstrates how to keep Windows 7 as the default OS in dual boot, you may use it for a reference.
How to Dual-Boot Windows 8 While Keeping Windows 7 As Your Default OS
http://blog.laptopmag.com/how-to-dual-boot-windows-8-while-keeping-windows-7-as-your-default-os
[Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy
of this information.]
Regarding your second questions in your first post, you can refer to the following link to know more about dual boot.
Dual
Booting Explained: How You Can Have Multiple Operating Systems on Your Computer
http://www.howtogeek.com/187789/dual-booting-explained-how-you-can-have-multiple-operating-systems-on-your-computer/
[Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy
of this information.]
Hopefully the information is helpful. Please let me know if you have any questions. Thanks for your time.
Best Regards,
Sophia Sun
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Opening raw files in photoshop cs3

can anyone help please, can i open raw image files in cs3? do i need a plug in or a download?

You need Adobe Camera Raw (ACR). Go to the download page and download the last vesion for CS3, believe it was 4.6.
Be aware that each version of Photoshop has its own series of ACR.
So if you have a latter model camera it might not work with an older ACR. To check look here http://kb2.adobe.com/cps/407/kb407111.html

Opening RAW files with Bridge CS3

When I try to open a RAW file from Bridge CS3 it defaults to Mac Preview and does not open Photoshop Elements 6 RAW converter. If I open a RAW file outside of Bridge it work fine. What did I do wrong?? Using a iBook G4 with OS 10.5.8 and Photoshop Elements 6 and new Camera RAW plugin for my Panasonic LX3 camera. hjz62

Bridge requires the latest version of Adobe Camera Raw to be installed. http://www.adobe.com/support/downloads/detail.jsp?ftpID=4581 Adobe states that this is the latest version of camera raw compatible with PSE-6 Mac. Others may have additional information.
As to the issue of defaulting to Apple software, this issue is usually a configuration problem wherein certain file extensions are granted permissin to be summarily opened by a given program. ((Right clicking any given file, then choosing "open with", and selecting a given program is a work around, but to avoid this step, you need to reconfigure your program settings.)) This is the Windows file path/solution, I am not familiar with Mac. I am confident that the issus is the same

RAW has (almost) gone! CS3/ Windows

Similar Messages

Maybe you are looking for