RAW IMAGE EDITING -help required

Please can someone help me with this.
I look at my RAW images in Organiser and then I use the EDIT tap to move to the RAW IMAGE edit section with the image I want to edit.
After I have edited the image- I move the image back to the main EDIT screen and then save as a Jpeg File in another folder.
The problem I am having is, when I then go back to the Organiser, I cant open the unedited original RAW image again, not sure why this is?
although I can see a small thamb-nail of the image it does not open but keeps on searching.
Can anyone tell me what I am doing wrong?
Thank you in advance

2013ALAM wrote:
Please can someone help me with this.
I look at my RAW images in Organiser and then I use the EDIT tap to move to the RAW IMAGE edit section with the image I want to edit.
After I have edited the image- I move the image back to the main EDIT screen and then save as a Jpeg File in another folder.
The problem I am having is, when I then go back to the Organiser, I cant open the unedited original RAW image again, not sure why this is?
although I can see a small thamb-nail of the image it does not open but keeps on searching.
Can anyone tell me what I am doing wrong?
Thank you in advance
To be sure I understand your workflow, I'll put it in my own words...
- You select a raw file in the Organizer, and you choose to edit it in full edit/expert mode (that depends on the PSE version).
- The file opens in the specific dialog panel of ACR, with its typical sliders
- When you have done your edits there, you can either be satisfied with them (case 1) or want to do further editing in the PSE editor with layers or other tools (case 2)
- case 1 - you simply click 'Done' and you are back in the organizer. The thumbnail is updated to show the edits.
- case 2 - You click 'Open' and the file opens in the normal editor mode of PSE. You do further edits, and you save the result in the format and the folder you want. When you close the image in the editor, you get back to the Organizer. If you have set your 'save as' with the right checkbox, the new jpeg is stored in the the Catalog as a version set.
Your problem seems to be that once you have edited your original raw file, you don't see it in its original state without the edits ?
If so, in the bar just under the tabs, you have a menu on the right (4 bars icon). You just set the choice to camera raw defaults, and you are shown the original raw image without your edits. Note that if you choose 'Shift + Open', you open a new copy without changing the previous settings saved in the xmp sidecar file.

Similar Messages

Frame accurate editing help required.

Is there no iMovie 11 Help section that instructs you how to edit a movie (cut footage out you no longer require etc.), preferably to the frame.
The Get Started section of help jumps from Lesson 3 adding video to Lesson 4 Enhancing your project.
Is it me?

Thanks, thumbnail slider helps but actual frame editing seems a bit hit and miss, sometimes works sometimes doesn't (sometimes cuts 2 frames rather than 1), I found it easier (and more accurate) to cut a few frames away from where i wanted and then select an individual frame and move this using the Left and Right cursor keys before deleting the unwanted frame(s) using Cmd+X to cut selected frames.
BTW I eventually found some editing help in Browse help (there is none in the Get started section, although it is demonstrated in a video in lesson 3, 'Add video to your project') but it was well hidden!
Browse help/Create an iMovie project/Trim video clips/Trim unwanted frames from a video clip.
Why they hide it here i'll never know, surely everyone wants to trim their video, or is it just me,haha.

A different version of the problem loading raw images edited in LR 3.3 to CS4

I have recently upgraded LR2 to LR3 (now up to 3.3). I have CS4 extended and ACR 5.7. Haven't printed for some months now because I have moved overseas (UK to Malaysia) until yesterday. The printing was a disaster because the colours printed are not as the finished print files. So I have been investigating (calibrated my monitor etc) and then I noticed any LR3 edited Nikon raw file when edited in CS4 carrying across the LR3 settings was so bad and very different to the LR3 version. The nice vibrant LR3 image was dull with inaccurate and toned down colours as though a piece of grey glass had been put in front of it.
So I have read as many of the forum questions on the related issue and have not found an answer or more to the point a solution. I run a MacPro with the latest Snow Leopard OS but all of the fixes I have tried don't change the problem. Is it a compatability problem or an error by me due to some obscure setting or something else? Never had the problem with LR2 and the same Photoshop CS4 software.
I also lost most of my LR2 edit setting for a good percdentage of the edited files when I upgarded to LR3. Don't know if this is related or another problem as now I have to redo all of the files that have lost their edited changes.
I would appreciate any help in solving this/these issues.

The question posted by me has not been answered and I am pulling my hair out trying to have my Lightroom/CS4 image processing work flow that has worked for nearly 2years back to normal.
I might as well not have lightroom as opening a lightroom 3.3 edited image in CS4 removes all of the editing done in lightroom. This appears to be true since I upgraded to v 3.3. As one person who posted in another theme suggested I tried saving a Tiff of the lightroom changes which I did via Nik Efex (I do not know how to save a raw file as a Tiff in LR as I don't do it as part of my normal workflow) but it reverted to the totally unedited version of the raw file when it opened in CS4.
Is there a problem with LR3.3 that Adobe are keeping quiet on. There was no warning when I picked uop the 'updated software' message when I opened LR a short while back. Now I am unable to use either as the processing route I use in LR is very fast compared to CS4 (in my view) and I do not have the time to completely change my work flow. I could revert back to LR3.2 but that may lose all of my editing and cause me no end of problems.
As this is an Adobe forum I thought these problems would be discussed with a lot more answers.

Importing RAW image edited using Capture NX

I made some adjustments to an image using Capture NX. But when I import the modified image into Aperture all the settings are gone ... Is there anyway to preserve all these settings during import ? I read a similar post on DNG.
http://discussions.apple.com/thread.jspa?messageID=3604267&#3604267
Does the same apply to RAW format ?

I made some adjustments to an image using Capture NX.
But when I import the modified image into Aperture
all the settings are gone ... Is there anyway to
preserve all these settings during import ? I read a
similar post on DNG.
http://discussions.apple.com/thread.jspa?messageID=360
4267&#3604267
Does the same apply to RAW format ?
This is correct - any editing you do in other RAW programs will not be preserved on import into Aperture, unless you export a TIFF or JPEG from the other editor and import that.
If you export a 16-bit TIFF file, you preserve the ability for Aperture to have the full range of editing it would with a RAW.
This is not a unique situation to Aperture; as I understand it Photoshop ACR would also not see changes you had made to a RAW file in CaptureNX.

975x Platinum Power Up Edition Help Required

Good Afternoon,
Have just purchased the following setup
Motherboard: MSI 975x Platinum Power Up Edition
Processor: Intel E6600
Ram: Cruicial Ballistix 2 x 1GB PC6400 Dual Channel (MSI Say It Is Supported)
GFX: MSI GeForce 7950GT 512MB PCI E
HDD: 2 x 80gb Seagate (Connected Via Sata)
CDROM: Sony DVD-RW
PSU: Hiper Modular 530W Black SLI Certified PSU
Think thats all you need, its been built by an experienced pc builder.
It will not start, when we switch it on it boots for about 5 seconds then shuts down and restarts, the error reporting leds are in the following combination:
Red Green
Red Red
Originally we were running Geil Ram, but realised MSI didn't support this so got some Crucial however it still doesn't work, I have read a number of threads on this forum and tried resetting the CMOS and playing around with the memory configs, any help and advice on how to get this working would be much appreciated.
Thanks

@deastwood:
Can we call you Clint for short?
Sympathies - We have a similar setup. I returned my first Corsair twins as the board would not boot with them as a twin. Turns out one was supposedly defective. BUT - when I recently replaced my Corsair twin 800s that did not work eventually with twin 1Gb CL4 800 Crucial Ballistix stix - I had a severe reboot issue and frequently - the system would not start without hitting the reset or the cold boot start button on the powerup many times. When it did not start I had the same LED settings you noted.
My colleagues who run a "confuser" shop, took out the Crucial memory, tried it in another 975 board (I think the ASUS 5B delux). and the Asus board booted just fine with the memory. They left the momory at 1.8VDIMM - stock - even though Crucial recommends 2.2 for these stix.
They removed the 975XPUE battery, reset the CMOS, and plugged the battery back in - VOILA - everything worked and today I am running as below. We have no idea why it would work after a CMOS reset as I had tried that before (but perhaps I had not left it long enough or did not press the reset button on the CMOS in the right sequence - something real simple like that????? ).
BOTTOM LINE: since they did that - it has no reboot issue - and all I did with the memory is set it manually to 5-4-4-12. It is like a ROCK now.
Others are more qualified than I about this board - but suggest you might go back to basics:
1) check the memory works in another board
2) remove battery, wait 10 minutes, press CMOS reset button for 10 seconds, replace battery
3) check yourself all the power/CPU fan connections and that you have the 4-pin molex connected to the GRAKA
(do you have a 20 or 24 pin power bar ?)
4) reseat the memory (just use one stick in either of the green mem slots)
5) do not bother connecting the IDE/CDROM until you get to post.
6) Just use one SATA drive (connected to SATA 1 (top))
7) Put in a less powerful GRAKA (a radeon 600 or NVIDIA equivalent) and run it with a VGA connector.
8) Read the MOAN guide just in case you all forgot something real simple. It does not take that long to ge through it.
It took me quite a few fiddles and frustrations to get my 6600 rig solid - sorry to hear about yours not even kick starting.
But just be a bit patient and take it from the start with as few extra bits of kit til u get past post to the Bios.
Happy rails.. and let us know how trhings are progressing... keith

Export to image sequence help required

In QT Pro this seems to work fine but when I look in the folder I have saved all the images, they are all the same! 6000 of the same frame...what I am doing wrong? I want to take an image sequence of each different frame from the movie

Off topic:
You don't want to show your new bride more than a dozen (flattering) from the video as "still image" files. I've had two wives and have gone through the experience.
Another fact of QuickTime video to still image format is the image quality found in those exports. They will be sized the same as the current display size of your video (expand the window prior to export to get a larger dimension) but you will not be able to print out copies at more than postage stamp sizes.
Try an image sequence export using just a "selection" (you'll use the letter i and o keys to make one) and see if they export properly.

Can't open RAW images in Photoshop

I purchased a new computer. It runs 64 bits. I have CS4. Since uploading it to my computer, I can not open RAW images. I have downloaded the most recent updates.
I have been using the 32 bit photoshop because I could not get my NIK filters to work in 64 bit. But I can't open any of my RAW images. I can't open them in either 32 or 64 bit.
I have version 5.0.0.178 of Camera Raw. I only know this because I can see it under "About filer.... Camera Raw". I cant find any camera raw filters in adobe/plug-ins in either version of photoshop. I have a huge photoshoot tomorrow. I NEED to open RAW images. HELP!! Regular Support is down for the next few days.

If you look at this list: http://kb2.adobe.com/cps/407/kb407111.html
You will see you need Adobe Camera Raw 4.6 or later.
As Chris says, update either maually from here: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4681
Or use the Updater from PS help.

Editing non-raw image files in Adobe Photoshop

Hi,
I am currently digging into the world of Lightroom and setting up a work flow which in my case needs to include editing non-raw files in Adobe Photoshop.
Please bear in mind that I am quite new to Lightroom so I am not sure I have found all shortcuts and settings to manipulate.
I will explain what I trying to do (and why) and hope that the community can comment and help put if possible.
I myself shoot almost everything in RAW format, and I have been using Photoshop (PS) and Camera Raw (ACR) for some years now. I am now on Photoshop CS6.
But now the amount of images to handle requires a CMS, so I went for Lightroom 4 - hoping/believing that I would find an effective and efficient work flow integration between the two Adobe products.
But I am more and more also helping others to enhance their images, and I most often get jpg files as image source.
I am used to using PS layers, filters, smart objects etc extensively to do what I want to do.
OK, I admin that I already use ACR quite a lot, and sometimes even as the only tool even for jpg images.
I have began diving/snorkeling with friends and often the images we bring back home is in jpg format, and so far I still believe that the best image "restoration" can be done in Photoshop using adjustment layers, channel mixing and filters to get satisfactory results.
So now on to my concerns and issues:
1) Lightroom user interface efficiency - "Edit in"
When I want to edit a jpg image in Photoshop I :
action
comment
- left click image to select it
ok, I agree this is needed
- right click image to bring up context menu
ok, I agree this is needed
- move cursor to "Edit in", and wait for another context menu
ok, ...
- click "Edit in Adobe Photoshop CS6"
Yes that's want I want
- Lightroom presents the "Edit Photo with Adobe Photoshop CS6" selection menu.
Yes I know, I saw it the last
nnn times I did it
- if I need option "Edit a Copy" or "Edit Orginal" I move cursor again, left click to select ,
   move cursor to Edit and left click
- and finally Lightroom sends the jpg image to Photoshop as a jpg image
No, I want a tiff file since that
is what I have set up in
preferences
OK, I know that I can also use the keyboard instead of mouse for this, but the number of actions required from my side is pretty much unchanged.
For a quick working, Lightroom and PS skilled person, this is just annoying.
Is this effecient?     Well it depends. For Lightroom beginners this is good. But for me it is a true annoying obstacle
2) Lightroom "Edit in" - is it effective
Is this effective?     I say no.      I have specified in preferences that I want PS to receive a TIFF file in Adobe RGB 1998 color space
                                                   Also, I cannot change to TIFF in PS without losing the link between the two images. (If I do, the new TIFF file is not imported by Lightroom, so I have to that manually)
I have found out that I can choose the path "Select image - select "Open as Smartobject in Adobe Photoshop".
This will give me a tiff file, and when saved in PS the jpg and tiff files are linked and Lightroom has automatically imported the tiff file into the Catalog.
What I need / what I would like to know / what I would like to have:
* Is there a (customizable) keyboard shortcut that enables me to: Select Picture + Use shortcut - and then I end up in Photoshop (with the Edit option I use 90% of the time) ?
* Is there a preference that I can set so that jpg images also are opened as tiff files in Photoshop per default?
* Is there a way to select multiple images and launch them all in Photoshop (and keeping the link between the jpg and tiff files) ?
* I would like a preference setting allowing me to choose that any new file coming back from Photoshop (after "Edit in" ) is written to a sub-folder, or to a specific folder set by me.
   This would align with my work flow for jpg handling, where the jpg is the "original" and the tiff file is what will eventually end up as image "master" (from where I print, or produce web / HDTV jpg's).
* Is there a way to automatically launch a Photoshop Action on the file coming from Lightroom?
   This would also help in my work flow. E.g. I have currently 100 jpg's and avi files which are UW (under water shots) and the adjustment layers I build are always the same (to start with).
   Of course, I can launch the Action once I am in Photohop - but again, doing 1-5 times is ok, doing it more than 100 times ...
* I am skilled computer programmer - can I use Lightroom SDK to write plug-ins to achieve the above enhancements ?
Regards
Bosse W

* Is there a (customizable) keyboard shortcut that enables me to: Select Picture + Use shortcut - and then I end up in Photoshop (with the Edit option I use 90% of the time) ?
-- The keyboard shortcut Command/Ctrl+E will perform steps 2-4 in your above list. You only have to click the Edit button, as the last choice (Edit Original, Edit Copy, Edit Copy with LR adjustments) will be remembered.
* Is there a preference that I can set so that jpg images also are opened as tiff files in Photoshop per default?
-- No, a JPEG in Lightroom will always open as a JPEG in Photoshop. If you have made changes to the file that are not supported by the JPEG format (e.g. added a layer) when you go to save the file, it will be saved as either a TIFF or PSD, based on the preference in Lightroom.
* Is there a way to select multiple images and launch them all in Photoshop (and keeping the link between the jpg and tiff files) ?
-- Yes, select all the files you want to edit, and use the keyboard shortcut, menu command, or right-click context menu command.
* I would like a preference setting allowing me to choose that any new file coming back from Photoshop (after "Edit in" ) is written to a sub-folder, or to a specific folder set by me.
   This would align with my work flow for jpg handling, where the jpg is the "original" and the tiff file is what will eventually end up as image "master" (from where I print, or produce web / HDTV jpg's).
-- No, there is no automatic way to do this. If you use the Edit a Copy method, the copy is created instantly in the same folder as the original.
* Is there a way to automatically launch a Photoshop Action on the file coming from Lightroom?
   This would also help in my work flow. E.g. I have currently 100 jpg's and avi files which are UW (under water shots) and the adjustment layers I build are always the same (to start with).
   Of course, I can launch the Action once I am in Photohop - but again, doing 1-5 times is ok, doing it more than 100 times ...
-- Yes and No, this is not something that can be setup in Lightroom, but you can set it up in Photoshop using the Script Events Manager.
* I am skilled computer programmer - can I use Lightroom SDK to write plug-ins to achieve the above enhancements ?
-- Yes: http://www.adobe.com/devnet/photoshoplightroom.htmlhttp://www.adobe.com/devnet/photoshoplightroom.html

I want to edit my raw images on cs5 photoshop. But when I go to open the .CR2 file it says '' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit

I want to edit my raw images on cs5 photoshop. But when I go to open the .CR2 file it says
'' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentation for additional information. ''
When I go to updates in photoshop help i try to update photoshop and photoshop camera raw but it then says
'' Updates could not be applied the error log file may help you in identifying the problem. Then, try updating again. If the problems persist, contact customer support for further assistance.
Photoshop Camera Raw 8.7.1(CS6) There was an error installing this update. Please quit and try again later. Error Code: U44M1I216 ''
I dont know how to get around this please help

CR2 files from which Canon camera?
Supported cameras are listed here
Camera Raw plug-in | Supported cameras

Cant figure out how to edit raw images

I am using a windows computer and have Photoshop elements 10. I'm trying to edit raw images but every time I try to open a RAW file it says that its the wrong type of file. I tried downloading Camera raw. Elements 10 is compatible according to adobes' site, up to camera raw update 6.7, and that's the first version that my camera (Sony a-57) is compatible with camera raw. I followed the troubleshooting help and ended up deleting and re-installing Photoshop elements but it still says that its the wrong type of file and wont let me open it.

Which version of windows are you using?
This is the camera raw 6.7 updater you tried?
Adobe - Photoshop Elements : For Windows : Camera Raw 6.7 update for Elements 10
I'd try running the above 6.7 camera raw plugin updater from the linked page above.

Why won't my edited RAW images show after a LR re-install onto a new Hard Drive?

Hi there. Recently my hard drive took a (hike) and crashed - data may or may not be recoverable (Geeks are working on that), and I needed to reinstall my CS5 and Lightroom software to a new hard drive (I had to buy a new one). All of my RAW photos are stored on an external drive and were not harmed, thankfully. Here is my dilemma. Most of the presets I used also went crashing with that hard drive, (yes I believe they were backed up but also on that hard drive...stupid I know-trust me I know!!) but most of them were the free ones from the adobe recommended users on this site. I actually found many of my favorites still posted on the Adobe site and re-downloaded and installed the presets I'd been using the past year and a half, and imade sure those presets were housed properly in their folder via Preferences in Lightroom. Great. I can continue on with my work. WRONG! When I went to go import a recent shoot that I had already edited, it imported the RAW files but none of the previous edits I had worked on for these photos were showing up...it was as if I didn't even touch them and they came right from my camera. What in the world is going on? I'm baffled...and freaking out as I have thousands upon thousands of edited shoots in RAW, and I fear that none of the edits and enhancements made to those photos are going to be present and I'll have to start over. Please tell me that all of my last 2 years of editing photos are still with the RAW files?!!!
I found a deal on a an HP Intell Core i7 processor) 2 TB hard drive tower, so I ended up needing to install the 64 bit versions of CS5 and Lightroom 3.6.
I did test out the RAW (.NEF) file in Photoshop CS5 and my edited RAW image came up "correctly" - so I know that the information is still with the RAW image...I just need it to work and show in lightroom, as it is easier to export the files to the sizes I need them to be.
Please be kind in your replies...I appreciate any help/guidance I can get on this. Plus the photos I need are for Seniors graduating in a few months here so you can imagine the panic mode is just a bit higher than normal. Many thanks.

The default location for the backups created by Lightroom on exit is in the same folder as the catalog itself (i.e. that would be on the same faulty drive). It is, however, possible to redirect those backups to a different destination, such as a different hard drive.....but only you know if you did that or not. Do you have any other backups, e.g. drive level backups?
Just to be clear, if you are importing afresh into a new catalog from Raw files that do have XMP sidecar files, you should see the final edited state from the previous catalog, but you won't see the individual history steps that got you there (as that's one of the things that are not included when you write XMP data from within Lightroom). If there is no XMP sidecar, you'll just get the original OOC image.

Help converting a raw image to JPG at 300dpi

Please help I have always used PS to edit my raw images. I am now using elements. I noticed that when I converted all my DNG files to JPS it saved them at 240 dpi is there anyway to change them?

You can use Process Multiple Files to change the resolution on a folder full of images.
1. File > Process Multiple Files
2. Select your Source folder (select a different location if you don't want to overwrite your originals, otherwise just click the Same as Source option).
3. Check the "Resize Images" box under Image Size.
4. Leave Width and Height blank and select 300 from the Resolution drop-down.
5. Leave all other options blank and click OK.

Help with importing .raw images and b+w filters

I have recently been taking alot of b+w images. With most of these images I apply a red in camera filter. When I then import the pictures into lightroom 2.3 a color version of my picture is then rendered, without the red in camera filter that i took the pictures with. Does anyone know of a way to restrict lightroom from changing .raw images to their color version and to show them as they were taken. If it matters I shoot with a Canon 1000D. PLEASE HELP!! Thanks.

Lightroom ignores metadata settings which are what is applied when you work with RAW and use Canon's Picture Style settings.
Those will be applied to JPG, but not RAW. This is actually a feature, not a bug, because it's considered to give you more control by using the settings in Lightroom for Monochrome, and apply red tints-- plus you could always still have the flexibility of making a color print if you wanted, which you'd lose if RAW enforced the Picture Style settings. If it bugs you, shoot in RAW+Jpeg (or just Jpeg), and bring the Jpegs into LR, but I'd recommend sticking with RAW and applying the edits you want in Lightroom instead.

Output jpeg looks different than edited RAW image

I just got CS6 and have been working on some new images in RAW. Once I finished the editing I wanted to do in RAW, I saved the image as a jpeg, then clicked "open image" at the bottom of the RAW window. The image that came up in Photoshop looked nothing like my edited RAW image. It's as if none of the edits ever occurred. I've looked on the internet and tried figuring it out on my own. I'm at a loss and would appreciate the help.

Noel - first of all, thanks much for taking the time to respond to my question. You helped me realize (and I should have realized this last night) that my question and problem statement lacked a lot of detail. I'm new to Photoshop, but I've learned a good lesson. Here's some more details: I use a Nikon D700, WIndows XP OS, and CS6. After taking the images from my memory card directly into Bridge, I can see that the images look "good", meaning they match what I was seeing on my camera display. The metadata for my photo of interest states that the color profile is RGB, and I assume this is sRGB? I open the .nef file directly into CS6 RAW. Once again the image in RAW looks just like it did in Bridge and on my camera display. I like how it looks in general, but I make the manipulations I want in RAW (removing blemishes, softening skin, etc). Prior to saving the manipulated image, I click on the Workflow Options link below the image and choose 8-bit, sRGB, then save it as a .jpeg. Photoshop's color space has also previously been set to sRGB, so the two match. If I open the image from RAW directly into Photoshop or open the newly created .jpeg from Bridge into Photoshop, the image no longer looks like what I saw in RAW. The image looks sort of hazy, the black background that was completely black in the RAW image is now visible in the Photoshop image, and the model's skin, which looked nice and smooth in RAW, now looks pixelated.
You suggestions about color management make sense, and I bet I'm still making some sort of mistake in that regard. Any ideas?

Question About Edit of Raw Images

I'm contemplating upgrading to iPhoto 08. It's nice that iPhoto can import raw camera images, but I am trying to understand what it does with them. When you import a raw camera image into iPhoto is it right away converted into some other format? If it's kept in raw format and you edit it, are the edits done on the raw image or some converted format?
I guess what I am getting at is that if there is a conversion to 8-bit grey level images when editing, then the advantage of shooting raw, which could be 12-bit, is lost. If there is a conversion to, say, a 16-bit TIFF, that would be okay.
Unrelated question: How the heck do you do a search just in this forum? The search box at the top right seems to be searching the whole Apple web site.
Thanks.

When iPhoto imports a RAW file it creates a jpg version of it for viewing and editing my iPhoto. Once a modified version is created, the RAW import or first edit of a jpg, further edits are written to an xml file and applied by iPhoto. So you're always one jpg edit away from the original.
As I understand it if you shoot B/W RAW you will get a color jpg version as the RAW contains ALL of the data, including color. The jpg that iPhoto creates is 8 bits per channel.
Now you can set iPhoto to edit the RAW file if you use an external editor like PS or PSE. When you do that a new file has to be created and saved to the desktop and imported as a new file. That the nature of RAW editing and iPhoto.
The current search function has been discontinued temporarily.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

RAW IMAGE EDITING -help required

Similar Messages

Maybe you are looking for