RAW images from D300 appear as thumbnails in Bridge

I have CS3 and ACR 4.5 and Windows XP, for the past month all RAW files from D300 have loaded perfectly and opened fine. Yesterday, I loaded files and they appear only as thumbnails in Bridge. I am not able to rotate, or apply any adjustments to these thumbnails. If I double-click them, they open as RAW files in ACR, and I can proceed and work on them as I normally would.
Another strange thing: all of the other files I have loaded from my D300 now react the same way, even though they were perfectly fine before. Images from D2x are fine.
Should I try to uninstall/reinstall Bridge? Any other suggestions? There have been similar threads here, but not this specifically.
thanks
alan

I just experienced the same phenomenon. It actually started in the middle of a session working in the Bridge. Other then the thumbnail appearing there were a couple of other strange symptoms I noticed when this happened to me.
1. If first happened to some files, then got worse as I went back and forth between folders. However, it never effected all the raw files. Some stayed as normal.
2. It effected .ORF files and .DNG files equally.
3. For both files effected and those not effected it created a corresponding .XMP file in the folders
4. If used the DNG converter to convert the ORF files to DNG the resulting DNG files appeared as normal thumbnails.
In any event the reset suggested by Curt did work, and restored everything back to normal.

Similar Messages

  • Opening RAW images from CANON D7 in photoshop? bridge?

    Hi everyone,
    First of all, i have no idea were to post my question so im very sorry if its in the wrong place....
    I have just bought a new camera which im very stoked with! A Canon D7. Guess if i was surprised when i couldn't open my raw images in photoshop! I work in CS3 and i really need to be able to open the images in Brigde and then Photoshop. And not having to open them in Canons software first.....
    So, is this possible or has this expensive camera made me disappointed?
    Very grateful for answers,
    Cheers Anna

    I have a 7D too. Here's the thing. The 7D has been supported for weeks now, unofficially, in the Camera Raw 5.5 release. It was unofficial because they hadn't finished profiling it yet. Adobe has released an update, Camera Raw 5.6 beta, that you can download. But since it's still in beta, it is not available from the normal public site. You have to get it from Adobe Labs, here:
    http://labs.adobe.com/wiki/index.php/CameraRaw5.6
    Unfortunately, I see that you're talking about Photoshop CS3. Adobe only puts out Camera Raw updates for the current version, CS4, so you won't be able to use Camera Raw 5.6 in CS3. What you want to do is go to the same link and instead, download the DNG Converter. Once you run your 7D images through the DNG Converter, they will be in DNG raw format, which Photoshop CS3 can read, and so can Aperture and OS X.
    At least Adobe is telling us where they are going and how ready they are and letting us download something that can read the 7D raw files. Apple has had no update available of any kind, and no advance word at all.
    Since you asked where you should have posted, there are a number of Photoshop forums out there and the are all aware of the situation. For example you could go to Adobe's forums, or many photography-related forums like dpreview.com. These Apple forums are more likely to know about Aperture and iPhoto.

  • Problem with the RAW images from Canon 5d Mark III

    hope you are doing good. i need your opinion regarding a phenomena i am observing in the RAW images from Mark iii.
    The following images appear to be absolutely correct in the camera and when viewed through a picture viewer.
    I have tried and tested the following scenarios:
    1. Used a medium speed kingston CF Card (new) and transferred the images through the USB cable supplied with the camera.
    2. Thought the card might be slow OR faulty.. used Sandisk Extreme and Extreme Pro SD Cards but same result.
    3. Transferred SD Card data through the builit in laptop card reader.
    4. Have directly imported the images from SD Card into Lightroom 4.3, copied the data firstly to laptop HDD and then imported, copied the SD card data to an external HDD and then copied. .... same result!!
    5. Have tried the same with both Win7 and Mac OS.
    6. The DPP sw that came with the camera gives the error of 'Decoding Failed' with these images.
    Usually 10-15 images out of 100 give this kinda pattern. so i was hoping if you can guide me what is going wrong here !!!

    The camera and PictureViewer are likely showing you the embedded JPG, while DPP and LR are decoding the raw data which appears to be corrupted.  Assuming you have formatted your SD cards in the camera and the issues are always in the same positions in the same images when you transfer them multiple times from the card to different computers via different methods, then the data is on the card that way.
    If the embedded JPG is ok then the sensor is ok, so something between the sensor-readout and the storage on the card appears to be failing intermittently, and it’s time to talk to Canon, I think.

  • Import raw images from canon eos 1000d to aperture 3

    Raw images from Canon EOS 1000D appear garbled tried using  all (?) import methods without success. Camera on firmware version 1.0.7
    HELP!
    Geoff

    Running Aperture Trial 3.1.2  all updates completed.
    May have solved one problem & got another!
    I can now import RAW images by selecting 'Raw' rather than 'Raw + L' on camera menu.This leaves me with all large files - potential future storage problem.  Looking into this.
    Thanks for reply though
    Geoff

  • I'm trying to export a raw image from lightroom 5.6 to Photoshop cc 2014 2.1.  I right click to export menu in lightroom as I've always done to export to Photoshop.  Photoshop opens, but it can't open file, window opens to find a file to open.  I'd like t

    I'm trying to export a raw image from lightroom 5.6 to Photoshop cc 2014 2.1.  I right click to export menu in lightroom as I've always done to export to Photoshop.  Photoshop opens, but it can't open file, window opens to find a file to open.  I'd like this to export my lightroom images to edit in photoshop as it has always been able to do for me.  What fix do you recommend?

    Hi Ashley Clavette,
    The Initial view setting works perfectly when the file is opened in Acrobat after setting the desired Initial View.
    When you upload the file onto Wordpress, and view it on that website in the browser...it might be using a different pdf handler program which might be causing this issue ( it would be helpful, if you could provide the screenshot) , however when you download the pdf again from wordpress server...and open in Acrobat/Reader...then what  exactly happens ?  Does the pdf opens in the desired Initial View setting?
    Rahul

  • Cannot open camera RAW images from Sony DSC-RX100M3 camera.  Working on a Mac in Photoshop CS5 and have camera raw 6.7.

    Cannot open camera RAW images from Sony DSC-RX100M3 camera.  Working on a Mac with Photoshop CS5 and Camera Raw 6.7?

    Bruce,
    When I made the transition to digital some 8 years ago, I had tremendous help from a number of well documented websites, among which:
    http://www.luminous-landscape.com
    I think a lot of stuff there to get you seriously going. Another one is:
    http://www.computer-darkroom.com
    I sold all my film based stuff, except a Nikon F3 and a handful of lenses and a Paterson developing tank.
    The Nikon suspiciously smells like foam mirror damping strips chemically decaying.
    I sold my enlarger over the internet. The word "enlarger" caused me to be on SpamCops blacklist for a while.
    I'm in this since the seventies, and I think you'll be as amazed as I was at the possibilities and control you have. And no more bags with $300 worth of film that's consumed in one shoot.
    Jump in both feet! you won't be sorry. And these forums are the best help you can get.
    Good luck,
    Rob

  • My cs4 won't open raw image from my Canon 5D II.  What is the solution?

    My CS4 opens raw images from my 40D with no problem.  However, when I try to open raw images from my new 5D II, it says it is "not the right kind of document".  Why is this?  Aren't all RAW images the same?  What is the difference between the RAW image in my 40D, and my 5D II?  Is there a solution to this?

    Please repost this in the Photoshop forum. This forum is for suite specific issues only.
    Bob

  • How to upload RAW images from Nikon 600 into Elements 11?

    Hi recently purchased Elements 11 and cannot load Raw images from also recently purchased Nikon D600. Is there a download and if so where is it and how does it work?
    Many thanks in advance
    trevor

    Launch the Editor and click Help >>Updates
    Install Camera Raw v7.2
    PSE11 ships with v 7.1 and needs bringing up to date to get preliminary support for the D600

  • Viewing RAW images from a Canon 450D in Aperture

    I am obviously missing something.  When I try and view my RAW images from my 450D, I am just seeing a blank black screen.  Any ideas what I should do to view them properly.

    Apple's list of supported cameras is at
    http://www.apple.com/aperture/specs/raw.html
    Historically Apple loses market share due to poor support for newer cameras.
    Workarounds include shooting RAW+JPEG and just using the JPEGs until Apple gets to supporting your camera or using Adobe's RAW to DNG converter. Apple canread the DNGs.
    HTH
    -Allen

  • Cannot open Raw images from 5d Mark II in CS3

    I'm back with more issues. I had this same problem opening raw images in CS3 from my 40d (I have Windows 7 64 bit). With your help I was able to fix that issue with a patch, but now I am having the same problem with opening raw images from my new 5d Mark II. Help again please!

    You need to familiarise yourself with this: 
    http://kb2.adobe.com/cps/407/kb407111.html
    You will see that, as a minimum, you need ACR 5.2, which needs Photoshop CS4 to work.
    If you don't want to upgrade, use the latest DNG converter which will make your images viewable and editable in CS3.
    It's here:  http://www.adobe.com/support/downloads/detail.jsp?ftpID=4620

  • I can't see previews of RAW images from a Canon PowerShot G16 in Lightroom 4

    I can't see previews of RAW images from a Canon PowerShot G16 in Lightroom 4?

    For that camera, you need at least Lightroom 5.2. The alternative would be to use the DNG converter, version 8.2 or later. Or, you can upgrade to Lightroom 5.

  • PSE 7 Open Raw Image from Nikon 5100

    I have tried to install a bunch of different plug in's however I was only sucessful with http://www.adobe.com/support/downloads/detail.jsp?ftpID=4582 ... Unfortunately, it is not compatible with Nikon 5100.  Is there another plug in update that I need to install to be able to view and edit my raw images from a Nikon 5100 in PSE 7?
    Thanks.

    No, there isn't. You either have to upgrade to the new Photoshop Elements, or else download the latest DNG converter and create digital negative copies of your images. Those can be opened with the Camera Raw that you already have. There will be no more updates for Photoshop Elements 7, and that includes the Camera Raw plug-in that is compatible with it.
    Of course, another alternative would be to add Lightroom to your arsenal. It would give you a lot more options for working with your raw images. But that is a decision that you will have to make.

  • How do I get a raw image from "My Pictures" into Photoshop?

    How do I get a RAW image from "My Pictures" into Photoshop? When I send it to Photoshop , it shows up as a grey checkerboard. The title is on the top. Whe I try to send a picture from Camera Raw, it does the same thing.

    Has it ever worked or is this just something that started happening recently?
    Have you tried resetting the photoshop preferences file?
    http://forums.adobe.com/thread/375776?tstart=0
    Have you installed the latest updates for photoshop cs5?
    In photoshop cs5 go to Help>Updates
    To post the system info here on the forum it might depend on your browser, but using firefox as an example, you would open the system info in photoshop, press Copy then OK.
    Here on the forum you would press the ctrl key and paste.

  • I have Lightroom 3.6 and it does not recognize the raw images from my Canon 7d mark II, suggestions?

    I have Lightroom 3.6 and it does not recognize the raw images from my canon 7d mark II, suggestions, do I need to upgrade?

    Yes, you need an upgrade for native support in Lightroom. You need version 5.70 or higher; current version is 5.71.
    Alternatively, you could use the most recent DNG converter and convert the raw files to DNG files before importing into Lightroom.

  • How do I get Photoshop elements 9 to open RAW images from my Canon g16?

    How do I get elemente 9 to open RAW images from Canon G 16?

    Hi,
    You will need either use the Canon software to convert the CR2 files to TIF files or use the free Adobe DNG converter to convert the CR2 files to DNG files. Then import the TIF or DNG files into PSE 9.
    You could update to PSE 12 to avoid the conversions.
    Brian

Maybe you are looking for