Raw images not working

I just started shooting raw all the time, but I imported them, and aperture says that it is an unsupported file format. I have updates for everything, but it still wont work. Any ideas would be great!
Thanks

Same problem here with the same camera (only it's the european version)
When shooting using RAW+jpeg, aparture does not identify them as separate files. Infact the transfered file is .cr2 with a file size of a jpeg. When you copy the file to the desktop you get the jpeg.
Wish there was a solution!

Similar Messages

  • Canon S120 RAW images not working with iPhoto. Why.

    Canon S120 RAW images why they can't be downloaded to iPhoto and/or when will Apple upgrade iPhoto so they can?

    Raw Support for each model of camera has to be added individually. That's Model not brand. The Raw from an S120 is not the same as the Raw from an S110 and so on. This is a pretty new camera, and the makes don't supply the Raw decoding, so they have to be reverse engineered. Then that will be released as part of an OS or camera raw update.
    Let Apple know you want this camera supported.
    iPhoto Menu -> Provide iPhoto Feedback

  • Camera Raw CS6 not working properly

    I have upagraded from Ps Cs5 to CS6.
    I open a file in CR, and modify the exposition. After that, I modify the clarity: immediatly, the exposition goes back as it was before the modification ...
    After the work on CR, I finish the file and go back to bridge: the image is not modified ! But if I dobble click on the same image in bridge, the file is opening in CR with the modifications: so this modifications are note visble on bridge ...
    Some body can help me ?
    I work with the last version of Br and Ps CS6.
    Thanks,
    Michel,   [email protected]

    Thanks a lot, Adriana, it is working ! You are right, it is the Nike plugins responsibility. Everything is OK now.
    Salutations and many thanks from Guadeloupe, French West Indies
    Michel GOGNY-GOUBERT
    Le 4 mars 2014 à 17:42, adriana ohlmeyer <[email protected]> a écrit :
    Re: Camera Raw CS6 not working properly
    created by adriana ohlmeyer in Adobe Camera Raw - View the full discussion
    If you have Nik plugins installed, please check reply # 8 on this thread:
    http://forums.adobe.com/message/6045415#6045415
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6179192#6179192
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6179192#6179192
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6179192#6179192. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Adobe Camera Raw at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • I have CS5 and a d-600. I would like to use camera raw but not working. I downloaded CR 7.3 and still not working. Do I need to upgrade to CS6 ..or just throw it all out the window and get rid of my d-600 ?

    I have CS5 and a d-600. I would like to use camera raw but not working. I downloaded CR 7.3 and still not working. Do I need to upgrade to CS6 ..or just throw it all out the window and get rid of my d-600 ?

    it allows you to use your cr files, Adobe - Adobe Camera Raw and DNG Converter : For Windows
    Camera Raw: How to use Adobe DNG Converter - YouTube

  • Camera raw is not working on my NEF files D600

    camera raw is not working on my NEF files D600.. I ALREADY TRIED all of the updates ( first 7.3, 7.4 even the 8.1) i have the photoshop cs6 and im not finding a way to make it read my files!!! even the DMG converter its not reading them!!

    It might be the way you are downloading them. I believe that Nikon Transfer has been updated to overcome a corruption bug which affects Adobe products.
    If you are using Nikon Transfer, it might be worth updating to the latest version, and downloading your photos again. Or use Adobe Photodownloader instead (I would).
    Also, accepted wisdom is to download photos off the memory card using a card reader, rather than via the camera USB, as it is less prone to problems. YMMV.

  • RH 8 Shed images not working

    1.  Shed images not working as of Nov. 12 2009

    Hi all
    Thanks for all the info - but I'm still stumped. I have tried generating my .chm
    files to the default SSL folders, manually copying all the child chms to the SSL
    folder for the master project, letting RH copy them, generating all chms to an
    external folder... no matter what I do, every time I recompile the master
    project it picks up random old stuff. I have checked and rechecked that my
    merged TOC items are to the latest child chms...
    Sometimes when I recomplie the master project, even the content in that reverts
    back to a previous version, sometimes it doesn't...
    I have looked at the Merged Files list in the hhp file, I have deleted this file
    and started my merge from scratch, I have manually deleted some paths (some
    paths are to directories on the server where any files for this project have
    long since been deleted...) directly in this file, but again every time I
    recompile the master project it picks up random old versions of the child chms (
    and the huge list of old merged files are put back in the hhp file. Even when I
    delete all chms from all locations in the folder I'm working in on my C drive,
    delete all the merged TOC items from the master project, save it, and
    recompile it, the list of old merged files reappears in the hhp file).
    Any more thoughts gratefully received:-)
    Also - I don't have a Baggage Files folder??
    One more thing... If I delete ALL the files under Merged Files in the hhp file using HTML Help Workshop, it crashes

  • Canon 350D Raw images not recognised

    Hi,
    I'm using a Canon 350D (UK version of Digital Rebel XT) and OS X (specifically preview and iPhoto) won't recognise the .cr2 raw images it produces.
    The images have finder thumbnails but if I try to open them I get:
    The document "xxx.cr2" could not be opened.
    Couldn't open the file. It may be corrupt or a file format that Preview doesn't recognize.
    In iPhoto I get an 'Unreadable files' alert telling me it can't read them and then lists the files.
    I know that it should work fine and am stuck in terms of what I'm doing wrong.
    This problem has existed since I was on 10.4.7 when I bought the computer and camera - I'm now on 10.4.9. I did download the Aperture trial to see if that helped and had the same problems. Reinstalling OS X made no difference.
    Any ideas?
    Iain
    Imac 20" C2D   Mac OS X (10.4.9)  

    Actually, I was getting support for my Canon Powershot S50 in 10.4.8 (at least I could open the Raw files, although Image Capture mysteriously stopped downloading them from the camera), after doing the 10.4.9 Combo update Preview announced it could not open the files. I went in and hacked this file:
    "/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/Raw.plist"
    Changed the entry for Canon S60 (which I don't have) to Canon S50. Preview will now open the files, haven't tried Image Capture yet to see if it is still broken (works fine in Panther BTW). See this discussion in MacOSXHints:
    http://www.macosxhints.com/article.php?story=20051101035330228
    It worked sort of for me (at least I can open the Raw files I already have).
    Francine
    Francine
    Schwieder

  • Raw editing not working

    Leopard 1.5.2 and all other current updates installed as of February 12, 2008. Macbook white April 2007 no other problems. I have imported some raw images from a Nikon D80. They show in the iPhoto events browser but when I try to edit them all the menu options along the bottom of the iPhoto window are greyed out. Edit, Enhance, Rotate, Crop, Straighten, all of them. Full screen works but again, those options are greyed out. All works fine with jpg files. I have rebuilt the databases by starting iPhoto with Command-Option without any improvement.
    Any ideas?

    Welcome to the Apple Discussions. Is this the first time you've tried to edit a D80 raw file? You might try deleting the iPhoto preference file, com.apple.iPhoto.plist, that resides in your User/Library/Preferences folder and try the edit again.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • Camera Raw synchronization not working

    I'm using camera raw 8.1 in photoshop cs6 extended.  When I select several images in bridge to synchronize the settings camera raw will not change all of the files.  It will work occassionally when I select only 1 file to sync.  This was working in the past and just started acting up.  Any advice or how I need to set preferences?  Thanks.

    Hi there.
    I have exactly the same problem with Bridge CC 6.0.1.6 and ACR 8.3.0.141. This always worked properly when I was using Bridge CS3. I am using a Mac running Mac OS 10.8.5
    The only change on the detail tab that is consistently synchronized to all selected photos is the white balance (when not set to auto). I called Adobe tech support last night. They gave me the following steps. It appeared momentarily to resolve the problem but it persists. I already had the latest Bridge and ACR versions installed and the permissions on the cache folder was set correctly.
    Howard
    Troubleshooting steps from Adobe:
    Please follow these steps to begin with basic trouble shooting regarding your bridge cc issue:
    1. Update to the latest version of Bridge.
    Download the latest Bridge update by going to Help > Updates or from the Adobe website at http://www.adobe.com/downloads/updates.html.
    2. Reset preferences, reset the default workspace, and purge the cache.
    You can also purge the cache by doing the following:
    Choose Edit > Preferences (Windows) or Bridge > Preferences (Mac OS).
    Select the Cache panel.
    Click Purge Cache.
    Or, you can manually purge the cache by doing the following:
    Bridge > Preferences (Mac OS).
    Select the Cache panel.
    Look at Location and note the path for the Cache folder.
    In the Finder, navigate to the Cache folder.
    Drag the Cache folder to the Trash (Mac OS).
    3. Reset the permissions of Application Support Folder:
    In top menu Bar -> Go->Go to folder
    Type in ~\Library
    Select Application Support right click get info and Under sharing Permissions please change all permission to read and write.

  • Google Images not working in Safari on Iphone

    Since a while back the "images"-tab in google does'nt work on the iPhone in any of the browsers I've tried. I've searched the net to find others with the same problem but with little luck. Here's a description of the problem.
    For example I search for "dog" in google in the Safari browser, this works just fine.
    Then I press the "images"-tab and get a thumbnail view with pictures of dogs, of course.
    But this is where it all goes wrong, when touching one of the images I get an enlarged view of an image next to it. The "back to the results" and "full image" buttons dim out (without being touchable) and swiping does not work. I don't know what has caused this to stop working properly, I know its not the new iOS version though.
    HERE is a youtube video I prepared that explains the problem.
    First, is there anyone else out there with this problem?
    Second, this is what I've tried:
    - Other iPhone web browser applications, for example "Mercury", "Opera Mini", "Skyfire" and none of them works except "Dolphin" (good work).
    - Resetting any of the settings in the phone, clearing cache and such have no effect.
    - Resetting the iPhone totally, factory settings. No effect.
    - Using someone elses iPhone. I've tried on an iPhone 4 and iPhone 3S, same problems (with iOS 5.01).
    - Trying out all of the settings in google, no change.
    - Setting the google view to "classic" instead of "mobile" works of course, but that makes the site look just like on a PC or Mac and is not what I'm after.
    Third, this problem seems to just affect Swedish users from what I can tell. There would be thousands of posts about this if everyone in the world was affected by it, but so far I've seen no posts on this matter. But after searching a while I found a swedish forum site on the subject. Link (in swedish). Also, when visiting google from Sweden some form of script automatically changes the url from .com to .se. I don't know if this has something to do with it?
    Anyone know what causes this problem and how It might be resolved?
    Best Regard
    Stefan, Sweden

    Hi Stefan,
    First; this must be the most thorough error discription I have ever seen. Impressive.
    Second; yep for a couple of weeks now I've been having exactly the same problems as you describe. One other thing that I've noticed, is that for me, the 'word suggestion drop down list' or whatever it's name is, no longer works. More specificly:
    I open Safari in my iPhone, surf to Google image search and type for example "dog" in the search field. Below the field, I now get a list of suggested words or phrases that I think is based on the most popular searches. For me, the first suggestion in this list is "dogo argentino" (a specific and popular breed of dogs). When I tap on the words "dogo argentino", the search field normally would switch input from "dog" to "dogo argentino" AND starts the image search automatically. However, since the problem showed up, when I tap on "dogo argentino" the input field is not affected (still reads "dog") and I would have to type "dogo argentino" manually and hit "search".
    I use a Swedish iPhone 4S (5.0.1 (9A406)) in the Telenor network. I also have tested the same possible solutions that you describe in your post, but with no luck.
    All the best,
    Ingo

  • Bridge and Camera RAW preferences not working

    I'm setting up a new Macbook Pro, late 2013 15", 10.9.2
    CS6 Production Premium, Also have Indesign CS6, LR5, Acrobat Pro 11. Camera RAW is version 8.4. Everything is up to date.
    Bridge and Camera RAW preferences are not working correctly. Bridge prefs related to Bridge display, e.g. color theme, text beneath thumbnails, favorite locations, etc.. all work fine. Bridge prefs open and close fine with no errors. "Double Click Edits Camera RAW Settings in Bridge" does not take. Photoshop launches to open Camera RAW regardless of whether this is checked or not. Camera RAW preferences will not open. Selecting "Camera RAW Preferences" from Bridge does nothing. Camera RAW seems to work fine hosted by Photoshop.
    I tried a new user with the same results.
    What's up with this? Anyone else seeing this? Solution?
    --David

    fixed it with this work around
    Camera Raw 8.4 | No metadata or Camera Raw edit

  • The new Update with the Patch for Camera Raw is not working. Code U44M1P34

    Hi there,
    i have a problem with the new CC Update - including the patch for Camera Raw 8.7.1
    Error Code: U44M1P34
    Photoshop CC (2014)
    After Effects CC (2014)
    Brisge CC
    The logfile shows 1 fatal error:
    FATAL: Payload 'Photoshop Camera Raw 8_8.7_AdobeCameraRaw8.0All 8.0.0.22 with a number following.
    I have tried to uninstall an reinstall. Did not work at all, because the same Problem is shown.
    I did not install in other folders. All other updates worked - but not this update. The problem seems to bee only caused by the Camera Raw Update.
    Are there others with the same Problem? Any ideas?
    Thanks in advance and Greetings,
    Joerg

    Hi Jeff,
    it seems that i have found a dirty, but working solution for my problem on this site: Getting fatal Exit Code 34 when installing an app
    To change these 3 folder names and reinstalling of my Programs worked fine without any errors:
    Adobe PCD -> Adobe PCDold
    backup -> backupold
    caps -> capsold
    Now the Programs are on the actual status with all updates included and everythings seems to be fine.

  • Why is code to get center of image not working?

    Hey there. I have am trying to establish the center of the imags that load so that I can put them in the center of the stage. I am doing this as each image is a different size.
    Here is the code i have gotten to work before but its not working now and I have been searching to find what I have done wrong with no luck. : (
    Would you look it over and maybe you will see what I am doing wrong?
    public function placePicture(e:Event = null):void {
         rawImage = imageData.image[imgNum].imageURL;
         lastImageIndex = imageData.*.length() - 1;
         imageLoader = new Loader;
         imageHolder = new Sprite;
         imageLoader.load(new URLRequest(rawImage));
         imageLoader.x -= imageLoader.width/2; //this should set the image to the center no?
         imageLoader.y -= imageLoader.height/2;
         imageHolder.x = 640; //this is the center of the stage
         imageHolder.y = 100;
         imageHolder.addChild(imageLoader);
         masterHolder.addChild(imageHolder);    
    The result when I publish is the picture comes on stage but the top left corner goes to 640 instead of the center of the image going to 640.
    I tried several variations of this all with the same result:
    imageLoader.x = -1*imageLoader.width/2;
    I tried using setRegistrationPoint with the following tutorial: http://flashscript.ca/set-registration-as3.php
    and I tried doing all of the above by inserting the loader into a sprite and then applying the code to the sprite and then adding that sprite to another sprite and putting that at 640 and not inserting it in another sprite and trying to straight up put the existing sprite at 640 (hopefully that all makes sense). And I have tried to put it to width/3 and nothing different happens.
    If you have any other ideas or can see what I am doing wrong I would really be gratefull for some tips! : )
    Thanks for any help!
    oh, and I am getting no errors on this.

    the image's width and height are not available until loading is complete.  ie, use a complete listener/listener function.

  • Anychart save as pdf/image not working

    A while ago I posed this question when the right click, save as stopped working on my APEX charts
    Apex charts - right click, save as image (not responding)
    The problem resolved when anychart.com was back up, but the problem is occurring again and I wonder if they've moved their php files.  Not even in Hilary's sample app is working. We think this happened within the last month.
    After choosing save as image and a location, the "saving" just keeps spinning.
    Most anychart google results at the moment seem to revert to the same landing page, and webcached copies refer to locations that no longer exist.
    I wonder with post anychart7 cleanup, have they moved the supporting php files? For instance, this location no longer exists
    http://www.anychart.com/products/anychart/saveas/pdf/PDFSaver.php
    A workaround is to use a local copy of the php file with custom XML
      <settings>
        <pdf_export file_name="mychart.pdf" use_title_as_file_name="true" url="/i/AnyChart4_SaveAsPDF_php4/PDFSaver.php" image_type="jpg" />
    But I only have the PDFSaver, not the AnyChartPNGSaver.php
    This file no longer exists either:
    http://anychart.com/products/anychart/docs/users-guide/export_image_scripts/php.zip
    Does anyone know where I can source the png saver php, or suggest another workaround? Or have any other information on this issue.
    An email to [email protected] back in 2013 got no reply.
    APEX 4.2.0
    Scott.

    Hi Scott,
    So, if i understand properly, making this change
    <settings><pdf_export file_name="mychart.pdf" use_title_as_file_name="true" url="/i/AnyChart4_SaveAsPDF_php4/PDFSaver.php" image_type="jpg" />
    will avoid atleast PDF issue? And as i dont have privileges to install or deinstall anything on /i/ folder, still this will work and URL path will remain same for each installation?
    Adding another question, as you said "it sends base64 information when converting to PDF", does it mean i will not be able to convert to PDF, if i am using intranet and PC's not accessible to internet?
    Thanks
    Sunil Bhatia

  • Swap Image not working Except in IE

    I am working on a class project, and we've just learned how
    to do "swap image" on rollover. It's working beautifully when in
    IE, but in Firefox it's not working at all and in Opera it's
    working strangely (only when on the "edges" of the flash text not
    when rolling over the flash text) Any ideas as to the problem? The
    flash text rollover works (changes colors), but the "bubbles" are
    supposed to swap images. BTW, I thought it might be a setting in my
    browser disabling something, but the swap image on classmates'
    sites show up fine.
    http://198.86.244.3/drsimpson/WEB140/drsimpsongallery/
    Thanks

    I can't see what is the problem. :-(
    Try replacing your flash buttons with plain gif images, it
    works the same way and you will have much less code on your page. I
    don't think the problem is there but you can always try.

Maybe you are looking for