RAW import from Lumix FZ1000 not working in new Photo app for Mac

I am not able to import from my Panasonic Lumix FZ1000 the RAW pictures into the new Photo Mac app. They are even not shown when inserting the SD card into my MBP.
I am only able to get the JPEG ones.
FZ1000 RAW is supported according Apple and was working with previous app.
Any idea?

I am able to import them, but I cannot edit them as RAW files. They behave like .jpegs. So correcting exposure for example is a horrible experience. My 5D Mark II files behave as they did in Aperture, so it is the FZ1000 RAWs in particular that are problematic.

Similar Messages

  • Import of photos is not working. Moreover 'photos' app is not getting closed, it says 'closing all libraries'. Even it is stopping shutdown/restart of my mac.

    Import of photos is not working. Moreover 'photos' app is not getting closed, it says 'closing all libraries'. Even it is stopping shutdown/restart of my mac.

    Next time you open the photos application hold down both of the keys suggested and then launch the application in the usual way. If you do this you will be presented with the opportunity to repair your library.

  • Using IMOVIE '08 to import from DV camera to 'BUSLINK' external hard drive( formatted for MAC ) but no success and kept getting this message: The import was canceled. You may not have permission to write to /Volumes/BUSLINK/iMovie Events.localized. Thanx

    Using IMOVIE '08 to import from DV camera to 'BUSLINK' external hard drive( formatted for MAC ) but no success and kept getting this message: The import was canceled. You may not have permission to write to /Volumes/BUSLINK/iMovie Events.localized. Thanx in advance!

    I finally got a representative that was able to help me, she had me go to Get Info, by right clicking iMovie from the finder, and I had to click on Sharing & Permissions>Everyone>Read & Write

  • How do you activate a 10.10.3 download.  I have downloaded twice (2 gig each) and have restarted as instructed.  I have also rebooted. "About this Mac' still reports 10.10.2 installed and I do not have the new photo app.

    I have downloaded 1010.3 twice (2+gig each).  The update window shows the 10.10.3 update has been installed, however, 'About this Mac' shows 10.10.2 installed and I don't have the new 'photo' app installed.  Once more, the quality of Apple software approaches that of Microsoft - letting the user debug instead of delivering the quality that used to be Apple.
    How do I activate the downloaded update.

    There may well be a problem with the update package.  I initially tried downloading the delta update (not the combo) from the Apple Support web site, and when I opened the package file, the installer ran but terminated almost immediately.  I restarted and only got the normal reboot process, not the "Installing software" display.  After restarting, I saw some evidence that the firmware updater was cleaning up some files, but nothing else appeared to have happened except that the 1.5Gb package file and a couple small subsidiary files had been left under /Library/Updates/_ManualUpdate.
    I tried running the command line softwareupdate tool to see if it would recognize the already-downloaded package file (which is something you might also want to try before downloading again just in case it works), but no such luck.  I then relented and used App Store, and that downloaded again and then performed the update successfully.
    Of course, then I had to horse around with turning off all the "photos in the cloud" nonsense, but that's another story.

  • ICloud shared photo stream stopped working with new photo app

    iCloud shared photo stream stopped working since the last OX update with the new photo app.  I don't have access anymore to the sharing albums, even those that I own

    iCloud shared photo stream stopped working since the last OX update with the new photo app.  I don't have access anymore to the sharing albums, even those that I own
    Don't the albums show at all?
    Are you signed in  with the same Apple ID that you used with iCloud before?  And are you currently browsing the System Photos Library? Only one Photos library, enabled as the System Photos library can sync with iCloud.
    For me it helped to disable iCloud Photo sharing in the System Preferences > iCloud > Photos > Options
    and in the Photos. app Preferences < iCloud.
    Then restart the Mac and enable the same Preferences again.
    And wait.
    The Shared albums came slowly back and were all back after one day.

  • Import from android option not working

    just not working I choose import and no bookmarks from my android appear in my mozzilla firefox bookmarks

    I have a le pan tablet. The first time I downloaded Firefox, the import from android did work. This is the second time for Firefox download. I did solve my problem. My stock browser was disabled, I simply enabled it.

  • LR Photo Import from Camera suddenly not working (5.7.1) - States "Some import operations were not imported becuase they could not be read."  Works on another computer and 4.3 version of LR on same computer but not newly installed LR 5.7.1 cc 2014.

    As above, all of a sudden, on one computer I cannot download from either the Canon 50D or 70D into LR 5.7.1.  It will download on another computer as well as on this computer in an older version of LR (4.3).  When I first turned on the computer this morning, I also got an error message that "The Lightroom catalog named 'Lightroom 5 Catalog" cannot be opened because another application already has it opened."  It was a cold boot, so I am not sure what is happening. 

    For the second problem being that the catalog is open in another application, go to the folder containing your catalog. You will find a file with the .lock extension. This is a file created by the catalog, and is automatically deleted when the catalog closes normally. Sometimes it can get left behind. You need to delete that file.
    When Lightroom says that the file cannot be read, it usually means that it cannot be written to the chosen destination. This tends to be a permissions problem in your operating system. Check to make sure you have write permission for the folder you are trying to import your images to.

  • Import from Repository option not working - OBIEE 11.1.1.6.2

    Hello,
    We are currently running on OBIEE 11.1.1.6.2. We would like to merge Two Repositories. Well, in addition to "Merge" option we have, we were trying *"Import from Repository"* option but in vain. It is showing the following error:
    *[nQsError: 12033] A client tried to connect to a server that is not of the right type*
    I understand this option is of low precedence from Oracle and its support. But, just want to know if anyone have used this option and encountered this error. If so, any workaround u wanna suggest. I appreciate any support.
    Thanks.

    967977 wrote:
    Hello,
    We are currently running on OBIEE 11.1.1.6.2. We would like to merge Two Repositories. Well, in addition to "Merge" option we have, we were trying *"Import from Repository"* option but in vain. It is showing the following error:
    *[nQsError: 12033] A client tried to connect to a server that is not of the right type*
    I understand this option is of low precedence from Oracle and its support. But, just want to know if anyone have used this option and encountered this error. If so, any workaround u wanna suggest. I appreciate any support.
    Thanks.Do you know if the OBIEE installation is done on a cluster of two servers?

  • Why did Lr5.7 add an identical volume to the destinations panel on import from camera card to which the new photos were added?

    I've been using Lr5 for a little less than a year and had never used a photo management program before. Up until 2015 I downloaded photos to my external hard drive and imported to Lr from there. No problem. January 6 I decided to try to download directly from my camera card. Suddenly, on my destination panel an identical volume showed up and this is where the photos were imported to. I know it was identical because it matched the info on the original volume, and when I looked at my file structure in my HD, it was as it should be. When I tried to move the new files into the original folders I got a message the "a folder already exists in that location," which it of course would read because, as I said, my HD folders were formatted correctly. Here's a screenshot of how it looked:
    I'm baffled. I found a workaround by setting up a temporary subfolder under my photograph library, moving them into that, and then into the correct folder. But I'm not sure it won't happen again. And I don't understand why it happened. Any help would be appreciated.

    I am aware that if you remove any external drive the computer won't recognize it.
    I safely ejected the SD card and closed iMovie then would reopen iMovie and insert the SD card multiple times and it did not work. I also tried restarting the computer a couple of times and also unsuccessful.

  • My iphotos is grey out and new photos app in Mac is not working after update.

    My iphotos and Photos app have stopped working after update today. I am getting this error message.
    Process:          
    Photos [934]
    Path:             
    /Applications/Photos.app/Contents/MacOS/Photos
    Identifier:       
    com.apple.Photos
    Version:          
    Build Info:       
    PhotoApp-209052000000000~4
    Code Type:        
    X86-64 (Native)
    Parent Process:   
    ??? [1]
    Responsible:      
    Photos [934]
    User ID:          
    501
    Date/Time:        
    2015-04-18 21:58:43.854 +0530
    OS Version:       
    Mac OS X 10.10.3 (14D136)
    Report Version:   
    11
    Anonymous UUID:   
    90C1B836-26D6-7503-1EC1-7E9457501D0F
    Time Awake Since Boot: 1400 seconds
    Crashed Thread:   
    0
    Exception Type:   
    EXC_BREAKPOINT (SIGTRAP)
    Exception Codes:  
    0x0000000000000002, 0x0000000000000000
    Application Specific Information:
    dyld: launch, loading dependent libraries
    Dyld Error Message:
      Library not loaded: /System/Library/PrivateFrameworks/PhotoLibraryPrivate.framework/Versions/A/Fram eworks/PhotoLibraryServices.framework/Versions/A/PhotoLibraryServices
      Referenced from: /Applications/Photos.app/Contents/MacOS/Photos
      Reason: image not found
    Binary Images:
    0x7fff6b3a1000 -
    0x7fff6b3d7837  dyld (353.2.1) <65DCCB06-339C-3E25-9702-600A28291D0E> /usr/lib/dyld

    Library not loaded: /System/Library/PrivateFrameworks/PhotoLibraryPrivate.framework/Versions/A/Fram eworks/PhotoLibraryServices.framework/Versions/A/PhotoLibraryServices
      Referenced from: /Applications/Photos.app/Contents/MacOS/Photos
      Reason: image not found
    There's a system component that 's missing that Photos is trying to use.  You'll need to boot into the Recovery volume (boot with the Command + R keys held down) and reinstall the system.

  • Cut/Paste not working in Microsoft Remote Desktop for Mac

    Sirs,
    I am using Microsoft Remote Desktop V8.05 build 24428 on a Mac under the latest Mavericks OS, and I find that Cut and Paste are not working. When I paste on Remote Desktop Windows always pastes the last thing cut/copied under the Windows remote session,
    rather than whatever I just cut/copied in another Mac window.
    I am well  aware that the keystrokes are different, and I tried to follow the instructions on another question which indicated that I should select the console session  checkbox on Remote Desktop's 'Connection' configuration window. However Remote
    Desktop no longer seems to have that option ... the topmost line now shows 'Admin Console' and checking it did not help with cut/paste.
    I hope you can tell me how to get this working as cut/paste is a great convenience.
    Thanks

    Hi,
    Clipboard redirection is not supported in current versions of Microsoft Remote Desktop. However, I will help to submit this as customer wish to the product team.
    Thanks for your understanding.
    Jeremy Wu
    TechNet Community Support

  • Brush function not working correctly PS Elements 11 for Mac

    The brush is not working correctly in that I cannot drag the brush.  It allows only spot healing, not dragging the brush.  Didn't use to have this problem.  Now do.  Not sure what has changed.  Thank you!

    Is this happening after upgrading to Yosemite?
    If yes, please see:
    Photoshop Elements doesn't respond when you use editing tools in Mac OS X 10.10
    Thanks,
    Anwesha

  • USB Mic not working in Premiere Pro CS6 for Mac

    So I've been editing in Premiere Pro CS6 on a mac for 6 months now.  I have to do a temp VO for a project and I thought I'd try the Narration feature in the mixer.  For some reason my USB mic doesn't show up in the Audio Hardware so I can't pick it.  The same mic shows up in the Mac Audio Settings and even shows up in Audition.  I've been having to use Audition but was curious to see if anyone out there has gotten a USB mic to work in Premiere Pro on a Mac.  Would be a really cool feature if it worked.
    Greg Jones
    D7,Inc.

    Some USB mics work fine, but many do not. It can depend on the exact mic, or might require a different ASIO driver (maybe something like ASIO4All?), or different ASIO setting, to work.
    Good luck,
    Hunt

  • I really do not like the new Photos app.  My iPhoto app is disabled in Finder.  How can I go back to iPhoto?

    My system just updated to OS X 10.10.3 and now Photos has replaced iPhoto.  My iPhoto has been disabled in Finder.  I really DO NOT like Photos.  Photos are no longer organized into "Events" and my Events labels are gone.  I also am not able to share photos via e-mail.  I tried to update iPhoto through the App Store, but got the message that it is not available in the US.  Then I got a message that said it was temporarily not available.  How can I get iPhoto back?

    now Photos has replaced iPhoto.  My iPhoto has been disabled in Finder.
    No, Photos did not replace iPhoto. It did not disable iPhoto. You updated to 10.10.3 before updating iPhoto to version that was compatible with Yosemite. That is why your older version is disabled.

  • Import from Hard Drive Not Working?

    I've just upgraded to iPhoto '11 and am, so far, not happy about it. Latest issue is with importing. It works fine for the iPhone and camera, but when I download photos from Shutterfly/Facebook and try the regular ways to import (using Import function, drag and drop onto iPhoto window, drag and drop onto iPhoto icon), nada. The total number of photos in my library does not change; can't find the photos anywhere. When dragging, I do get the green plus arrow, but no number of photos, which seems problematic. And of course, the Help menu is useless. Ideas? Thanks in advance.

    Got the same issue since I upgraded. I use iTunes64, do you? I thought that turning on Genius was the issue but it is not. Today it got even worse... I exported the Library as I always do now because of this bug, and while Windows sees the export in the Recent Items, iTunes64 does not see the file, and looking through my drive I can no longer see it either. As if iTunes64 had not only wiped its own Library, but also crushed the one I exported!!!
    Would love to know how to get rid of that one. I have five kids and manage music and iPods for the whole family!!! Need this Library badly!

Maybe you are looking for