RAW/JPG - Aperture doesn't find the JPG files anymore
Hello,
I have all my photos on an external hard drive (referenced). Yesterday I had to format this hard drive, so I copied all photos on the hard disk of my iMac, then formatted the external hard drive and then copied all the photos back there. The hard disk still has the same name, but Aperture didn't find my photos anymore. So I selected all photos in Aperture and choose the option to reconnect the images (sorry, don't know exactely how this option is called in English, because I'm using the german version). After some time my photos were all reconnected. But some of the photos, which are RAW/JPG (RAW Master), do find the RAW now, but I can't switch to the JPG. But this did not happen to all RAW/JPG...
So I tried to move some of these photos from my external hard drive to the Aperture library (again I don't know how this is called in English). Aperture moved the RAW files into the library, but not the JPG and I also got an error "null".
So my question is, how can I reconnect the JPGs? Hope you guys understand my problem
And before someone ask, sadly I didn't thought of moving all photos into the library instead of just copying them myself so I can format the external hard drive.
Which camera are the Raw files from?
Similar Messages
-
After I've changed the file name/format in Finder Aperture can't load/relink to the referenced file anymore. For some reasons I don't like to reimport the file.
As you told, the command "Locate Referenced File" doesn't work, if the filename doen't match exactly. And the filenames should keep their new names.
"Locate Referenced File" will be able to reconnect one file at a time, if you direct Aperture to the matching file in the Loate Referenced File dialog, but it will not be able to recognise the other matching referenced files and to reconnect them all at once with the "Reconnect All" button.
It will be a lot of work to reconnect the one by one. Usually it is much easier to rename the original master files using Metadata > Batch change in Aperture than to try to do that in the Finder. -
How can I download all my raw+jpg files from new Canon SX50 HS camera?
How can I download all my raw+jpg files from new Canon SX50 HS camera? Some work and most won't.
Are you running Lightroom 4.3 which is the minimum version required for that camera?
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html -
Hi,
I'm trying to back up my macbook with time machine on the Lacie external driver I usualy use for this, but today my computer doesn't find the driver. I haven't done back up in 6 month.
Today, the Lacie driver is pluged and running, but the computer just does'nt find it.
what shall I do ?Some things to consider:
Is the drive mounted, i.e., visible via Finder and/or on the Desktop?
Is the drive still selected in System Preferences, Time Machine? If not, use the "Select Disk" button.
Is Time Machine still turned on (System Preferences, Time Machine)?
Can you see the drive (and mount it) using Disk Utility (in your Utilities folder)?
charlie -
I'm trying to use Migration Assistant to update my new Mountain Lion iMac from an external USB hard disk drive. I told it to look for a drive, yet it is constantly saying that it is "looking for other computers". It doesn't find the external drive ... it just endlessly looks for other computers. Why is it looking for other computers at all, when I told it not to?
Wow, the wording in Migration Assistant is misleading. I've never used it before, so I thought I would try to copy my files from the external drive ... my old iMac died, but I managed to get everything I need off it, using the 'cp' command in single-user mode. So I guess I'll just have to manually copy the files from the external drive to the new machine. I was hoping that Migration Assistant might help somehow, but obviously not.
Thanks for the quick reply! -
N82: Nokia Software Update doesn't find the phone
Hello, I am trying to update the firmware of my Nokia N82, but I get an error message from Nokia Software Updater saying that it doesn't find the phone. I find that strange as Nokia PC Suite indeed finds the phone. The icon on the taskbar says that "AndersMobil is connected".
I've noticed that if I let Nokia PC Suite run at the same time as Nokia Software Updater, this icon shows that the phone is being connected and disconnected several times while Nokia Software Updater tries to find the phone, something that might indicate that the two programs cannot be run at the same time? I tried to run Nokia Software Update alone, but still the program doesn't find the phone.
In Windows Hardware Manager (or Units manager, not sure of the english translation) of Windows XP, "Nokia GSM Phone USB Modem" gives the following error message: "The unit is not working as it should as Windows cannot load the necessary drivers for this unit (Code 31)." Under "Portable Devices" in Hardware Manager/(or Units manager?) the error message "This unit cannot start. (Code 10)" appears for the unit "AndersMobil".
I followed the guidelines on the internet reinstalling Nokia PC Suite and Nokia Software Updater, removing and reinstalling the drivers, but Nokia Software Update still doesn't find the phone, and the same error messages appears in Hardware/Units manager every time.
What do I do?
Regards,
Anders
By the way, I sent an e-mail to Nokia support about this but they still haven't answered although it's been a long time since.
Moderator note: translation removed.
Message Edited by sphere_s on 18-Feb-2008 06:53 AMSee also my post "N82: Remove memory card and click OK" at /discussions/board/message?board.id=smartphones&message.id=79797#M79797
I don't know if that problem might be interconnected with the other in some way or not.
Kind regards,
Anders -
my Itunes account tells me i need to update it to version 10.6.1, but when I click download and the computer (mac 2007) goes to the "checking for softwares" page it doesn't find the update? Help me please, what do I do?
Try updating to 10.6.3.25.
A .dmg installer for iTunes version 10.6.3.25 for Mac OS can be found at the following download page on the Apple website:
iTunes 10.6.3 -
I have just made a clean instalation of Lion, with a bootable disk, and I planned to restore my files (music, photos, etc.), The installation run perfectly, but Lion doesn't find my backup files. So, I'm about to loose all of my iTunes library, work documents (I'm a lawyer!!), my kid's photos.... How can I restore my files?? Help!!
Since you seem to be using a new disk for Lion, Time Machine will consider previous backups to be for a "different" computer. Try doing a control-click or click-and-hold on the Time Machine icon in the Dock, then choose "Browse Other Time Machine Disks". This should allow Time Machine to see the previous backups.
In the worst case you should be able to open those Time Machine backups and copy your documents from there to your home folder.
By the way, you've been misled by poor field labeling on this forum into typing a large part of your message into the field intended for the subject. In the future just type a short summary of your post into that field and type the whole message into the field below that. -
My old eMac doesn´t find the hardrive
After restart my eMac it appeared a folder with a question mark. I think my eMac doesn´t find the hardrive. I have tried to reinstall the system but of course it happens the same, it doesn´t find the disc where to install.
I restarted pressing ALT and then appears two arrows but nothing happens when I click on them.
Please, what can I do?
Regards.It sounds to me like your hard drive has failed.
you'll need to get it repaired. They may or may not
be able to recover your data... I hope you have a
backup system.
Sorry mate.
Yes, fortunately I have a backup of everything and I have a iMac Intel Duo Core... what´s strange is that this has happen to me four times and the only way of recover the eMac was to format the hardrive. I think this time I going to change it for a new one. -
i have a Canon 6d and would like to convert my raw ( CR2) photo's into dng files. Adobe DNG converter 8.4 doesn't recognise the CR2 files. How can i solve this?
It is possible that you are not following instructions correctly in the DNG converter. The DNG converter interface asks for the FOLDER that contains your raw images. Choose the folder, but don't open it. After you have chosen the folder, click on the Convert button. The DNG conversion process should start. Does that help you?
-
How do i update my camera raw? I can not find the download update I've just brought a new d4s and I'm using the iMac with cs6 version. PLEASE HELP..
The Adobe auto updater is pretty decent in CS6. Just go to the Photoshop Help menu > Updates.
You will be able to update ACR, Photoshop and Bridge right there, if there are in fact updates available. -
When i want to download the test version of CC, creative cloud doesn't find the file. Always searching, what do i do?
Hi clemdef,
Change your browser and try again. Please refer the kb: http://helpx.adobe.com/creative-cloud/kb/troubleshoot-cc-installation-download.html for download issues.
You may even try the direct download: http://prodesigntools.com/adobe-cc-direct-download-links.html .
Kindly follow the very important instructions before download.
Regards,
Romit Sinha -
I cant pair my Bluetooth headphones to my IPhone 5 the phone doesn't find thee vice. Can anyone help please?
Forget the pairing on iPhone and if possible the headphones ( see their user guide ) and start the pairing process again from "new"
-
New Canon Rebel XSI, and Aperture won't read the .CS2 files properly??
Hello all,
I have read through the posts but didn't fine one that answered my question. I just bought a Canon XSI and tried to upload my RAW files to Aperture, and first it showed the "unsupported image format" red screen. After messing around I could get it to see the images, but they were the size of thumbnails. It will read the JPG files fine. The Aperture site says that the CR2 files should work. I also tried deleting the rawfile in the system folder and re-ran the installer for 2.1 update, didn't change a thing. My Aperture version is 2.1.1. Any ideas?
Thanks,
JohnLucked out and figured out the real problem thanks to Mark Olson's blog:
http://markolson.ca/2008/07/17/canon-eos-450d-rebel-xsi-cr2-raw-on-mac/
It turns out that the problem was related to RAW+JPG. Mac does not import the RAW files properly and I should have suspected this being the problem when I noticed the RAW file size was way too small (exact same size as the JPG file).
Luckily I had not deleted the files from my memory card so I was able to go back and import the RAW images again. Now at this point I'm going to ask Steve to cover his eyes because I had to use Vista to download the files!
All seems ok now. -
Where can I find the physical files of APEX_APPLICATION_FILES
Dear The Expert,
I got list of files from "SELECT id,name FROM APEX_APPLICATION_FILES"
1605213787030003 F1761593527/f101.sql
1605004091027283 F928641689/f101.sql
1686620894182663 F1237766750/Doc1.rtf
1687611599284065 F1530590835/blebul1a.gif
1609417775069075 F1328258633/lippologo1.jpg
1685122925154852 F199693486/Doc1.rtf
1682930319090730 F1852805503/SQLAnywhere12_Full.exe
1683026294099067 F796050035/New Text Document.txt
1683131489100554 F823097404/New Text Document.txt
1683316167115060 F747145779/Product List.rtf
where can I find the physical files ? .. does it also delete the physical files if I run "DELETE FROM APEX_APPLICATION_FILES WHERE ID = '1682930319090730' ?
please advise
thanks & regards
LucHi Luc,
APEX does not create physical file that is in APEX_APPLICATION_FILES table.
It can only store the file in BLOB format in repository.
So when we upload file APEX stores file in BLOB column of APEX_APPLICATION_FILES table and then use when needed but no physical file.
Regards,
Kartik Patel
http://patelkartik.blogspot.com/
http://apex.oracle.com/pls/apex/f?p=9904351712:1
Maybe you are looking for
-
How can i delete a saved login name and password from facebook thats on my computer
im wantin to delete someone that has saved their login name and password on facebook through my computer and i want it off
-
Idoc Created once PO created issue
Hi , Idoc created once PO Creted with single item is populated with 'WE' partner data withinthe requried segment of the idoc , But when we create the PO with Multilpe items with same header data the segment with 'WE' partner is missing the respetive
-
How to POST Message to HTTP Adpater?
HI @, I have a requirement where I need to post XML message directly to HTTP adapter from webdynpro application. I have tried using HTTP Client availbale and it works fine. But I need help on how to achieve the same in Wed Dynpro for Java? Regards
-
How to sync a simulate card with a real card
Hi all: I have only one 6124 on hand and installed in a 1073 chassis. But my project finally need two 6124 for data acquisition. I am developing software for it, so I just want to test the performance of sync two cards, but the problem occurs every
-
I need ministation air app but i can't install it in app store with my accunt
i need "ministation air" app, but i can't install it with my accunt