Raw materail insp at the time of GR
Hi, During good in-ward insp from vender out of 10 pcs, 4 pieces are rejected or to be scraped and 6 are good. How to show this scrap qty at the time of gr? pls help.
Hi
During UD and insp stock posting for the Insp lot of Raw material in QA11 u have to enter 6 PC To unrestricted use and 4 PC To scrap if the vendor is not responsible for any kind of damage and no provisions for replacement. If u have any terms with vendor for replacement then Enter 4 PC To Return delivery
Regards
Brahmaji
Similar Messages
-
Reg insp lot at the time of delivary
Dear all,
To carryout insp at the time of delivary , I have give insp type-12 in material master and in customization assigned insp type to delivary document type,at the time of delivary we are getting error as "status of insp lot no 120000000052 patial lot 00000 does not allow goods issue", although we are doing delivary for total qty we are getting this error, please help me in solving it.
Thanking you allHi,
If your assign the Inspection at delivery level means follow the below step.
1. Save the delivery document without PGI. After saving the delivery system create the inspection lot.
2. Clear the Inspection lot (result recording & Usage Decision by using QA32)
3. After complete the UD only system will allow to do the PGI (Go to change mode delivery and do the PGI)
Note: Condition for PGI UD should be accepted. If UD has been rejected cancel delivery.
Revert further clarification.
Regards,
S.Babusingh -
One further bit of information: I did recently run a "disc scan", in case there were file system errors, then ran defragmentation -- on the external drive. This did not solve the problem.
I think I'll deal with your different questions in several posts, it'll be easier for me.
josephunit2n a écrit:
A few comments: recently, for the first time, I did a full "backup catalog" routine (with external RAID storage connected) to a second external usb drive, which ran successfully (done, at the time, over longstanding concern that even the RAID 1 storage was not enough data security - as you have mentioned).
Good thing, and it's not really a surprise for me, I would have expected no slow down in a process which only reads your RAID drive data.
One big concern: in all transactions (backup catalog; move to external storage) I always ignore the "reconnect missing files" dialogue. This is due to past experience. Long ago, when I ran it routinely, it was a disaster. At first, I thought I might reconnect a few randomly missing files. While this was so long ago I cannot recall all details, everything went to hell. Even after manually locating a "missing" file, the "reconnect" never worked. The number of "missing" files skyrocketed, far out of any realistic number. Even with Adobe phone support (which is critical for such an application - and must be made available again, I have no problem paying for it), the catalog was hopelessly corrupt, and I manually built a new catalog, file-by-file. Adobe advice then: NEVER USE "RECONNECT MISSING FILES", which I have followed religiously (while also trying to be meticulous in my transactions, not to ever create any "missing" files).
I have never read Adobe advising to never reconnect missing files. Maybe it's not the best course in all circumstances, but I don't see a possible problem there. What is recommended by Adobe is to always reconnect files before doing a backup... Now, my own experience is that if you don't reconnect before a backup you get a restoration where the catalog still points to missing files and where those missing files have not been backed up, totally logical. I would not consider this question as a BIG concern.
. Finally, "just for fun", moments ago I connected the RAID storage drive, opened the organizer, and randomly opened a few images in "full screen" view - then opened a scattered group of 4 or 5 images -- and, they all came up promptly!!!!! So, this "slow access" problem isn't consistent, all the time. Also, I must comment, your advice to avoid the RAID 1 external usb drive, for future catalog storage, seems "tech superstition", which I will not harshly criticize, as I also have my own technology irrational superstitions. I believe the computer "sees" this drive no differently than any other external, usb, drive.
There's a difference between 'technology irrational superstition' and 'reasonable doubt due to ignorance' ... Understanding the problems which may arise when using a RAID drive array supposes understanding of:
- how the organizer catalog recognizes any drive in its database. That's ok for me, but I have no personal experience of such systems. What I can tell you is that most of the problems I have seen with RAID systems were of that kind.
- How efficiently the organizer deals with the OS when using a catalog stored on the main drive, with adequate RAM and scratch disk space while the files themselves are on the external RAID drive. Some organizing tasks imply writing to the files themselves. The xmp sidecar files (very small) are stored together with their raw parent. The thumbnails are stored in a database in the catalog folder...
- How the organizer works with the OS (the APIs) and the particular disk driver. (I am totally ignorant, but I have seen similar problems for other Adobe applications in the feedback forum).
... As I said, I have to leave for a moment...
To be continued! -
Standard report for the cost of raw materail in production of finished good
Is there any standard report for calculation of raw material cost from the production order of finished goods.?
plz help in this issue.
Thanks.closed
-
Entering charct. values at the time of GR
Hi All...
We have a Issue regarding raw material receiptu2026
We r getting Ores (ROH) from different parties, they send test certificate with every lot. We need to enter the % of nickel or Chrome etc at the time of GR for PO. After that stock will move to quality stock where they will check the parameters and record. Purchase dept will compare the results.
I tried this by giving Material class (001) for the material, but itu2019s not asking the characteristic value at the time of GR.
My requirement is at the time of GR, system should ask the characteristic value..we dont want to manage stock in batches..
Please share ur thoughts.
sriniDuring GR U can only enter Characteristics Value for Batch Class under Classification. For which Material should be Batch managed and use calss type 022 (if batches are at plant level) or 023 (if batches are material or client level). Create a class type of 022 or 023 and assign to Materail master and also activate batch management for the material and then try to create GR, it will allow to enter the values for characteristics.
-
I don't understand why in Bridge there are 2 choices, -1- Open raw and -2- Open in Photoshop and yet both choices give you the same result--The raw window opens with PS below it. After having worked on my raw NEF files I save it to dng. My thinking behind this, is that I alreay have done what was needed and would now like to start working on it within Photoshop. It seems that the only way to automatically open it directly within PS is if I save it as a tiff, psd or jpg. But since this is not what I want to do then why must I add extra steps as opposed to just opening it hwere I want. I mean the 2 choices are there, so why not do what it is being asked?
If I may step in in this discussion, I always use DNG but never have used ACR to achieve this result.
As Curt stated the changes made in ACR to a Raw file (or for that matter a DNG file) are undoable without problems.
My workflow (using Canon CR2 but that is not important, let's say a dSLR generated Raw File) is to use Photodownloader in Bridge (not perfect by far but still the best and easiest way for me).
I connect my CF card using a card reader and let Adobe Photodownloader do the work.
Inhere I use several options:
- convert the CR2 file to a DNG
- back up the original CR2 on a separate disk
- rename the DNG to yyyymmdd (shot date) and sequence number
- add a metadata template for copyright to all the DNG files.
Sorting out the keepers I open the DNG in ACR and either hit Open (for open directly in PS) or use save as Tiff or PSD depending on next step in development or simply hit Done to apply changes and leave it for later use.
The advantage of having both ACR in PS and Bridge is huge. The only difference between both is that by default PS has the Open Button selected and Bridge (open in Camera Raw) has the Done button selected, thats all.
But here is the good part, you can use both simultaneously! For example have PS in film strip mode with multiple files selected and when changes are ready hit Save as start the process but locks up PS itself. Switch to Bridge and use Open in Camera Raw and start with the next job while ACR PS is still running in the background
When I open a DNG in PS using ACR in either PS or Bridge I continue developing with actions and fine tune with layer mask, brush etc etc.
Sometimes use Save As for PSD with the layers still active (huge files) when needing to revisit or not quite ready. But mostly I use an action to flatten the files and save as PSD.
Both DNG and PSD are ending up in my archive, my clients receive whet they want, PSD, Tiff but mostly jpeg and resized.
When having the job finished and every once in a while I clear out the original CR2 files from Back up because in all the years I use DNG (at least 5 years) I never had to use the original CR2 instead of the DNG that is thoroughly backed up as is the original PSD.
But since disk space is cheap you can choose to keep them.
An other option is to include the original raw file in the DNG but I would not recommend that because the file size is getting almost twice as big.
The biggest plus side for me using DNG is that the xmp data is written directly to the file while original CR2 or NEF needs an xmp side car file next to it with this data.
However saving changes to metadata is taking a bit longer to a DNG then to an XMP side car file, depending on system resources and time this never been a real problem for me -
Why is PS CC2014 crashing all the time? Can anyone with experience help?
Hi there
I have had relentless problems with all versions of PS CC and PS CC 2014. It crashes almost every time I use it. Some days I get away with it, but mostly I don't. It is basically becoming unusable which is a nightmare because I rely on it for my work. I lose time and work frequently. I have to manually save my files every few minutes for fear of losing everything. A classic cause of it crashing is just opening a file, grabbing a folder of layers, holding down shift to restrain vertical / horizontal direction and dragging with the move tool to reposition in the document. Bam, APPCRASH. A typical fault message is this, which I just generated now, by doing just that:
Problem signature:
Problem Event Name: APPCRASH
Application Name: Photoshop.exe
Application Version: 15.2.0.236
Application Timestamp: 542531ba
Fault Module Name: ntdll.dll
Fault Module Version: 6.1.7601.18247
Fault Module Timestamp: 521eaf24
Exception Code: c0000005
Exception Offset: 0000000000027b0b
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 2057
Additional Information 1: f116
Additional Information 2: f1169e5949b625e6ff320471dc2e63c2
Additional Information 3: ca58
Additional Information 4: ca58819a9254a4ddaed3ec0fe7f101b2
I have looked up this C0000005 code and it suggests that the application is trying to address illegal blocks of memory. If that helps.
Another classic is when I try to SAVE AS and the dialogue fails to display the folder structure in the window so I cannot select a location. Once this happens, we're heading into crash land.
Only PHOTOSHOP does this. I have plenty of professional software and tools on my system.
BEFORE ANYONE SUGGESTS I UPDATE MY VIDEO CARD DRIVERS, PLEASE READ:
I have a Radeon HD7750 card, which is approved for use with PS.
I have the very latest drivers for it (not the BETA release, but the very latest stable drivers and latest Catalyst Control Centre update). I have had problems with all versions of PS CC and CC 2014 and that's through various video card driver updates.
I have completely uninstalled PS CC2014 and all other versions of PS and uninstalled Creative Cloud and reinstalled both from scratch to try to solve this but it hasn't helped.
I have no third party plugins in PS
I have done regular and recent comprehensive checks on all my hardware and updated drivers, from BIOS, to CHIPSET and everything else.
I have no IRQ conflicts, no problems in device manager
I have monitored my system temperatures and they are fine
I have done 16 hours of MEMTEST+ on my 16GB of DDR3 RAM - over 4 complete passes, with no errors
I have stress-tested my video card with FUTUREMARK and it is perfectly fine within its capabilities
I have even installed Steam and the a PC game (which I don't normally do) and it stands up just fine, no crashes.
I have run a Windows System Health Check and his shows green lights for everything
I have done a file system integrity check and no errors are found
No other software on my system crashes like this, but PS does it all the time
I use Adobe Bridge, and I've never had it crash. I use Adobe Reader, it's fine. I use Adobe Premier Elements 12 sometimes, it's fine. Adobe Photoshop CC / 2014 is not fine.
I don't want to moan, I really need a solution and if anyone experienced can suggest something that goes beyond doing the the above I would be very grateful for your help
PERFORMANCE SETTINGS:
PS SYSTEM INFO:
Adobe Photoshop Version: 2014.2.0 20140926.r.236 2014/09/26:23:59:59 x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, AVX, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 3500 MHz
Built-in memory: 16268 MB
Free memory: 9930 MB
Memory available to Photoshop: 14551 MB
Memory used by Photoshop: 70 %
3D Multitone Printing: Disabled.
Windows 2x UI: Disabled.
Highbeam: Enabled.
Image tile size: 1024K
Image cache levels: 4
Font Preview: Medium
TextComposer: Latin
Display: 1
Display Bounds: top=0, left=0, bottom=1080, right=1920
Display: 2
Display Bounds: top=0, left=1920, bottom=1024, right=3200
OpenGL Drawing: Enabled.
OpenGL Allow Old GPUs: Not Detected.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
AIFCoreInitialized=1
AIFOGLInitialized=1
OGLContextCreated=1
NumGLGPUs=1
NumCLGPUs=1
glgpu[0].GLVersion="3.0"
glgpu[0].GLMemoryMB=1024
glgpu[0].GLName="AMD Radeon HD 7700 Series"
glgpu[0].GLVendor="ATI Technologies Inc."
glgpu[0].GLVendorID=4098
glgpu[0].GLDriverVersion="14.301.1001.0"
glgpu[0].GLRectTextureSize=16384
glgpu[0].GLRenderer="AMD Radeon HD 7700 Series"
glgpu[0].GLRendererID=26687
glgpu[0].HasGLNPOTSupport=1
glgpu[0].GLDriver="aticfx64.dll,aticfx64.dll,aticfx64.dll,aticfx32,aticfx32,aticfx32,atium d64.dll,atidxx64.dll,atidxx64.dll,atiumdag,atidxx32,atidxx32,atiumdva,atiumd6a.cap,atitmm6 4.dll"
glgpu[0].GLDriverDate="20140915000000.000000-000"
glgpu[0].CanCompileProgramGLSL=1
glgpu[0].GLFrameBufferOK=1
glgpu[0].glGetString[GL_SHADING_LANGUAGE_VERSION]="4.40"
glgpu[0].glGetProgramivARB[GL_FRAGMENT_PROGRAM_ARB][GL_MAX_PROGRAM_INSTRUCTIONS_ARB]=[2147 483647]
glgpu[0].glGetIntegerv[GL_MAX_TEXTURE_UNITS]=[8]
glgpu[0].glGetIntegerv[GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS]=[192]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS]=[32]
glgpu[0].glGetIntegerv[GL_MAX_TEXTURE_IMAGE_UNITS]=[32]
glgpu[0].glGetIntegerv[GL_MAX_DRAW_BUFFERS]=[8]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_UNIFORM_COMPONENTS]=[16384]
glgpu[0].glGetIntegerv[GL_MAX_FRAGMENT_UNIFORM_COMPONENTS]=[16384]
glgpu[0].glGetIntegerv[GL_MAX_VARYING_FLOATS]=[128]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_ATTRIBS]=[29]
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_PROGRAM]=1
glgpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_PROGRAM]=1
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_SHADER]=1
glgpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_SHADER]=1
glgpu[0].extension[AIF::OGL::GL_EXT_FRAMEBUFFER_OBJECT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_RECTANGLE]=1
glgpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_FLOAT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_OCCLUSION_QUERY]=1
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_BUFFER_OBJECT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_SHADER_TEXTURE_LOD]=1
clgpu[0].CLPlatformVersion="1.2 AMD-APP (1573.4)"
clgpu[0].CLDeviceVersion="1.2 AMD-APP (1573.4)"
clgpu[0].CLMemoryMB=1024
clgpu[0].CLName="Capeverde"
clgpu[0].CLVendor="Advanced Micro Devices, Inc."
clgpu[0].CLVendorID=4098
clgpu[0].CLDriverVersion="1573.4 (VM)"
clgpu[0].CUDASupported=0
clgpu[0].CLBandwidth=5.25736e+010
clgpu[0].CLCompute=379.453
License Type: Subscription
Serial number: {REMOVED FOR PRIVACY}
Application folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\
Temporary file path: C:\Users\Em\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
K:\, 221.6G, 221.2G free
J:\, 244.1G, 233.8G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Required\Plug-Ins\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Plug-ins\
Installed components:
A3DLIBS.dll A3DLIB Dynamic Link Library 9.2.0.112
ACE.dll ACE 2014/08/12-23:42:09 79.557478 79.557478
adbeape.dll Adobe APE 2013/02/04-09:52:32 0.1160850 0.1160850
AdbePM.dll PatchMatch 2014/09/07-21:07:38 79.558079 79.558079
AdobeLinguistic.dll Adobe Linguisitc Library 8.0.0
AdobeOwl.dll Adobe Owl 5.2.4
AdobePDFL.dll PDFL 2014/08/18-15:13:12 79.512424 79.512424
AdobePIP.dll Adobe Product Improvement Program 7.2.1.3399
AdobeXMP.dll Adobe XMP Core 2014/08/20-09:53:02 79.156797 79.156797
AdobeXMPFiles.dll Adobe XMP Files 2014/08/20-09:53:02 79.156797 79.156797
AdobeXMPScript.dll Adobe XMP Script 2014/08/20-09:53:02 79.156797 79.156797
adobe_caps.dll Adobe CAPS 8,0,0,13
AGM.dll AGM 2014/08/12-23:42:09 79.557478 79.557478
ahclient.dll AdobeHelp Dynamic Link Library 1,8,0,31
amtlib.dll AMTLib (64 Bit) 8.0.0.122212002 BuildVersion: 8.0; BuildDate: Wed Jul 30 2014 15:59:34) 1.000000
ARE.dll ARE 2014/08/12-23:42:09 79.557478 79.557478
AXE8SharedExpat.dll AXE8SharedExpat 2013/12/20-21:40:29 79.551013 79.551013
AXEDOMCore.dll AXEDOMCore 2013/12/20-21:40:29 79.551013 79.551013
Bib.dll BIB 2014/08/12-23:42:09 79.557478 79.557478
BIBUtils.dll BIBUtils 2014/08/12-23:42:09 79.557478 79.557478
boost_date_time.dll photoshopdva 8.0.0
boost_signals.dll photoshopdva 8.0.0
boost_system.dll photoshopdva 8.0.0
boost_threads.dll photoshopdva 8.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.2.6.32411 2.2.6.32411
CITThreading.dll Adobe CITThreading 2.2.6.32411 2.2.6.32411
CoolType.dll CoolType 2014/08/12-23:42:09 79.557478 79.557478
dvaaudiodevice.dll photoshopdva 8.0.0
dvacore.dll photoshopdva 8.0.0
dvamarshal.dll photoshopdva 8.0.0
dvamediatypes.dll photoshopdva 8.0.0
dvametadata.dll photoshopdva 8.0.0
dvametadataapi.dll photoshopdva 8.0.0
dvametadataui.dll photoshopdva 8.0.0
dvaplayer.dll photoshopdva 8.0.0
dvatransport.dll photoshopdva 8.0.0
dvaui.dll photoshopdva 8.0.0
dvaunittesting.dll photoshopdva 8.0.0
dynamiclink.dll photoshopdva 8.0.0
ExtendScript.dll ExtendScript 2014/01/21-23:58:55 79.551519 79.551519
icucnv40.dll International Components for Unicode 2013/02/25-15:59:15 Build gtlib_4.0.19090
icudt40.dll International Components for Unicode 2013/02/25-15:59:15 Build gtlib_4.0.19090
igestep30.dll IGES Reader 9.3.0.113
imslib.dll IMSLib DLL 7.0.0.154
JP2KLib.dll JP2KLib 2014/06/28-00:28:27 79.254012 79.254012
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libiomp5md.dll Intel(R) OpenMP* Runtime Library 5.0
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
LogSession.dll LogSession 7.2.1.3399
mediacoreif.dll photoshopdva 8.0.0
MPS.dll MPS 2014/08/18-23:43:19 79.557676 79.557676
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CC 2014 15.2
Plugin.dll Adobe Photoshop CC 2014 15.2
PlugPlugExternalObject.dll Adobe(R) CEP PlugPlugExternalObject Standard Dll (64 bit) 5.0.0
PlugPlugOwl.dll Adobe(R) CSXS PlugPlugOwl Standard Dll (64 bit) 5.2.0.46
PSArt.dll Adobe Photoshop CC 2014 15.2
PSViews.dll Adobe Photoshop CC 2014 15.2
SCCore.dll ScCore 2014/01/21-23:58:55 79.551519 79.551519
ScriptUIFlex.dll ScriptUIFlex 2014/01/20-22:42:05 79.550992 79.550992
svml_dispmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
tbb.dll Intel(R) Threading Building Blocks for Windows 4, 2, 2013, 1114
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 4, 2, 2013, 1114
TfFontMgr.dll FontMgr 9.3.0.113
TfKernel.dll Kernel 9.3.0.113
TFKGEOM.dll Kernel Geom 9.3.0.113
TFUGEOM.dll Adobe, UGeom© 9.3.0.113
updaternotifications.dll Adobe Updater Notifications Library 8.0.0.14 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 8.0.0.14
VulcanControl.dll Vulcan Application Control Library 5.0.0.82
VulcanMessage5.dll Vulcan Message Library 5.0.0.82
WRServices.dll WRServices Fri Mar 07 2014 15:33:10 Build 0.20204 0.20204
wu3d.dll U3D Writer 9.3.0.113
Required plug-ins:
3D Studio 15.2 (2014.2.0 x001)
Accented Edges 15.2
Adaptive Wide Angle 15.2
Angled Strokes 15.2
Average 15.2 (2014.2.0 x001)
Bas Relief 15.2
BMP 15.2
Camera Raw 8.6
Camera Raw Filter 8.6
Chalk & Charcoal 15.2
Charcoal 15.2
Chrome 15.2
Cineon 15.2 (2014.2.0 x001)
Clouds 15.2 (2014.2.0 x001)
Collada 15.2 (2014.2.0 x001)
Color Halftone 15.2
Colored Pencil 15.2
CompuServe GIF 15.2
Conté Crayon 15.2
Craquelure 15.2
Crop and Straighten Photos 15.2 (2014.2.0 x001)
Crop and Straighten Photos Filter 15.2
Crosshatch 15.2
Crystallize 15.2
Cutout 15.2
Dark Strokes 15.2
De-Interlace 15.2
Dicom 15.2
Difference Clouds 15.2 (2014.2.0 x001)
Diffuse Glow 15.2
Displace 15.2
Dry Brush 15.2
Eazel Acquire 15.2 (2014.2.0 x001)
Embed Watermark 4.0
Entropy 15.2 (2014.2.0 x001)
Export Color Lookup Tables NO VERSION
Extrude 15.2
FastCore Routines 15.2 (2014.2.0 x001)
Fibers 15.2
Film Grain 15.2
Filter Gallery 15.2
Flash 3D 15.2 (2014.2.0 x001)
Fresco 15.2
Glass 15.2
Glowing Edges 15.2
Google Earth 4 15.2 (2014.2.0 x001)
Grain 15.2
Graphic Pen 15.2
Halftone Pattern 15.2
HDRMergeUI 15.2
HSB/HSL 15.2
IFF Format 15.2
IGES 15.2 (2014.2.0 x001)
Ink Outlines 15.2
JPEG 2000 15.2
Kurtosis 15.2 (2014.2.0 x001)
Lens Blur 15.2
Lens Correction 15.2
Lens Flare 15.2
Liquify 15.2
Matlab Operation 15.2 (2014.2.0 x001)
Maximum 15.2 (2014.2.0 x001)
Mean 15.2 (2014.2.0 x001)
Measurement Core 15.2 (2014.2.0 x001)
Median 15.2 (2014.2.0 x001)
Mezzotint 15.2
Minimum 15.2 (2014.2.0 x001)
MMXCore Routines 15.2 (2014.2.0 x001)
Mosaic Tiles 15.2
Multiprocessor Support 15.2 (2014.2.0 x001)
Neon Glow 15.2
Note Paper 15.2
NTSC Colors 15.2 (2014.2.0 x001)
Ocean Ripple 15.2
OpenEXR 15.2
Paint Daubs 15.2
Palette Knife 15.2
Patchwork 15.2
Paths to Illustrator 15.2
PCX 15.2 (2014.2.0 x001)
Photocopy 15.2
Photoshop 3D Engine 15.2 (2014.2.0 x001)
Photoshop Touch 14.0
Picture Package Filter 15.2 (2014.2.0 x001)
Pinch 15.2
Pixar 15.2 (2014.2.0 x001)
Plaster 15.2
Plastic Wrap 15.2
PLY 15.2 (2014.2.0 x001)
PNG 15.2
Pointillize 15.2
Polar Coordinates 15.2
Portable Bit Map 15.2 (2014.2.0 x001)
Poster Edges 15.2
PRC 15.2 (2014.2.0 x001)
Radial Blur 15.2
Radiance 15.2 (2014.2.0 x001)
Range 15.2 (2014.2.0 x001)
Read Watermark 4.0
Render Color Lookup Grid NO VERSION
Reticulation 15.2
Ripple 15.2
Rough Pastels 15.2
Save for Web 15.2
ScriptingSupport 15.2
Shake Reduction 15.2
Shear 15.2
Skewness 15.2 (2014.2.0 x001)
Smart Blur 15.2
Smudge Stick 15.2
Solarize 15.2 (2014.2.0 x001)
Spatter 15.2
Spherize 15.2
Sponge 15.2
Sprayed Strokes 15.2
Stained Glass 15.2
Stamp 15.2
Standard Deviation 15.2 (2014.2.0 x001)
STL 15.2 (2014.2.0 x001)
Sumi-e 15.2
Summation 15.2 (2014.2.0 x001)
Targa 15.2
Texturizer 15.2
Tiles 15.2
Torn Edges 15.2
Twirl 15.2
U3D 15.2 (2014.2.0 x001)
Underpainting 15.2
Vanishing Point 15.2
Variance 15.2 (2014.2.0 x001)
Virtual Reality Modeling Language | VRML 15.2 (2014.2.0 x001)
Water Paper 15.2
Watercolor 15.2
Wave 15.2
Wavefront|OBJ 15.2 (2014.2.0 x001)
WIA Support 15.2 (2014.2.0 x001)
Wind 15.2
Wireless Bitmap 15.2 (2014.2.0 x001)
ZigZag 15.2
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
Libraries
Adobe Color Themes
Installed TWAIN devices: NONE
Can anyone help me resolve this issue, with suggestions beyond those I've already listed above?
I'm getting pretty stuck...
ThanksHi Chris
Like I said in the OP I had the very latest AMD drivers installed before submitting that crash report.
Since our conversations, I have completely removed my Radeon HD7750 GPU, uninstalled the drivers for it and the Catalyst Control Centre, and have resorted to using to my motherboard's integrated Intel HD graphics. I have the very latest drivers for the Intel HD graphics installed. Still, today I have had another crash event in Photoshop. So this cannot be the fault of the AMD card or drivers, because they are no longer present on the system.
CRASH:
Faulting application name: Photoshop.exe, version: 15.2.0.236, time stamp: 0x542531ba
Faulting module name: ntdll.dll, version: 6.1.7601.18247, time stamp: 0x521eaf24
Exception code: 0xc0000005
Fault offset: 0x0000000000027b0b
Faulting process id: 0x1fd8
Faulting application start time: 0x01cfe7c41d6b75d0
Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Photoshop.exe
Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
Report Id: a9fd0b69-53c1-11e4-8d80-bc5ff43517ae
Fault bucket , type 0
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: Photoshop.exe
P2: 15.2.0.236
P3: 542531ba
P4: ntdll.dll
P5: 6.1.7601.18247
P6: 521eaf24
P7: c0000005
P8: 0000000000027b0b
P9:
P10:
Additional files: - I have a report file I am trying to post but this forum tells me I am spamming when I try to submit. I will try to post it separately... -
Trying to save file, but get one of two errors 50% of the time
Here's a breakdown of my issue.
I'm a 3d artist working on some texture files for my models. I'm constantly saving the file to make quick changes and fixes, doing so quite rapidly. So much so I now have actions recorded to cut down on having to go to the directory to save over the older file. Now for the issue. I'll try saving over the file, but then I'll either be giving an error message saying "Could not save a copy as ________ because the file name was not valid" or "Could not save a copy as _________ because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the Properties command in the Windows Explorer to unlock the file".
This is my personal pc so I do have the permissions enabled. If I open up the directory where the file is saved after I get these errors the file is then gone. These errors go away if I wait about 6 seconds in between getting the error to save then it has a better chance of working. That's not all of the time though. Sometimes I have to go in and just save manually, which is a real pain when I have actions recorded. It's almost like the relay between Photoshop and my directory isn't fast enough or something's just internally wrong. I've been dealing with this for a year. 11 months and 29 days too long. Help please!!!BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
Cost component not splitting at the time of Rune the tine of Cost Estimate
http//
Hi,
We are in developing phase for Product costing for coal mine project ,
we have raise coal material with Non component BOM , and Routing is only one activity with 400- Raised Coal Qty-MT ,
We upload the plan with Production cost center -activity type and cost element ( as per cost component -we have 10 cost component as per below )
RM - Blasting
Production Overhead
Power - Main
Stores,Spare,Consum
Repairs & Maint
Lease & Hire Char-PM
Power - Auxiliary
Depreciation
Over Burden
Development
we done the plan for Amount and Qty by KP06,KP26 and update plan price but system not calculate the cost component splitting in cost estimate as per planning while only one item showing for all cost to Production Overhead cost component
Production Overhead cost component which assign the secondary cost element which is assign to activity type 400
can any one help me to how we can resolve this issue
Please find attached documentHi,
Here I am providing the necessity and importance of splitting structure, will share the configuration steps once you go through the following and get the comfort level.
Expense Analysis and Splitting in Manufacturing Cost Centers
Introduction In SAP Cost center work as a cost responsibility center, where all the expenses and cost are stored and analyzed for the purpose of management decision making.
The cost could be fixed or variable in nature. The difference between variable and fixed costs can be made in various ways in product costing in CO module.
Fixed costs represent the static costs incurred by the organization, which doesn’t change on the basis on manufacturing activities, which remain constant irrespective of production activities like rent for the premises, salaries of office staff etc.
On the other hand, variable cost varies based on the level of production activities; if production activities increase then variable cost also increased like electricity consumes raw material charges etc.
However all the variable cost doesn’t vary in direct proportion by quantity of goods produced.
In this document will try to define; how the Expenses analysis and splitting of cost done in manufacturing cost centers.
From controlling prospective, fixed cost remain constant regardless of operating activities, but if these factor changes, variable cost will fluctuate.
Basically raw material costs represent variable cost, but in this document main focused will be given to distinguish fixed and variable activity cost.
The segregation between fixed and variable cost is optional and is derived from the configuration and master data configured in cost center accounting and overhead accounting.
Activity Price:
There are different methods that could be used in cost center accounting to determine the activity price. The simple way is the manually enter “Fixed” and “Variable” Activity cost (KP26).
However there are other methods used in Cost center Planning and Budgeting that automatically calculate the fixed and variable activity price.
Here the focused will be given on Planning and Budgeting activity and automatic calculation of plan activity rate in cost center.
This method aggregate planned costs by cost element and capacity by plan unit to calculate the activity price.
Activity independent costs are segregated among different activities based on Splitting Structure, while activity dependent cost directly used for the purpose of variable activity rate calculation.
Fixed Activity Cost:
In product costing all those cost, which doesn’t vary based on the activities in manufacturing cost will represent fixed cost.
In a manufacturing cost centers there may be two or more activities performed.
To calculate the activities rate, the fixed costs are distributed to various activities on the basis of Splitting Structure defined for cost center.
Variable Activity Cost:
Variable activity cost, which directly depend upon the activity type and fluctuate based on increase or decrease in manufacturing activities. In SAP variable activity cost are directly linked to the respective activity.
Activity Prices: Fixed and Variable Split
In Cost Center Accounting dividing the cost between Fixed and Variable requires appropriate split to be made in the cost entered for the activity. The process is described below:
i. Variable cost would be planned at activity level and expenses should be maintained at cost element in the manufacturing cost center by assigning activity and cost element combination.
In other word, the expenses should be planned on Activity type at the time of primary cost planning (KP06).
Then the variable activity rates are calculated on Total cost planned at Activity divided by Total number of activity planned at that cost center (i.e. capacity in KP26)
ii. Fixed cost would be planned at independent of activity type. These costs are maintained in KP06 at cost element level on manufacturing cost center.
Then the fixed costs are distributed on various activity types on the basis of Splitting structure defined at OKEW.
In Splitting Structure we define the rules, how the fixed cost will be distributed to Activities. For the purpose of this document, considering split of fixed cost on the basis of Capacity maintained in KP26.
Regards,
Pavan kumar Arvapally -
Lightroom won't export more than one image at the time
I am having trouble exporting my RAW files as JPEG files. At first Lightroom 4.4 seemed to skip certain photos when exporting and now I'm unable to export more than one image at the time. How can I fix this? I didn't seem to have this problem before the 4.4 update, but then again, the 4.4 update has been running for a few days now. I run on a 32bit Windows 7 with 4GB of RAM.
Lightroom has also been a considerable lot slower since the last couple of days, yet there have been no changes at all to my computer or system or anything - nothing's changed expect for the fact that Lightroom isn't behaving as it used to.
Can anyone help me?I think I've found the problem - I've accidentally 'synced' my folder instead of importing the RAW files. Which brings me to my next problem and question - I've already edited the RAW files and would really like it if there's a way I could re-import the files without losing my changes/metadata, is there anyway that's possible?
-
Problem at the time of Goods receipt(MM)
Dear all,
I am new in MM and I am facing a problem at the time of goods receipt against subcontracting order. In our scenario we are create a subcontracting order for one finish material and in BOM we are giving some raw material. After that we are doing transfer posting (material provide to vendor) and then receive the finish goods.But at the time of goods receipt against SCO order I am getting error that multiple parent batch for finish batch. I am unable to understand the problem. so, kindly help me.
Thanks
Rahul.I think you are receing multiple bacthes for the parent material,In this case you need to select Distribute qty option in MIGO.Here you can split the qty batchwise for parent material.If you split the qty it will allow you to receive the material.
-
Inspection lot is not required at the time of part scrapping
Dear All
Question- We are developed (Z)Scrap process in ECC6
In scrap process,In backgroun rejected parts are moved From PR01 to
RJ01 (Mvt.type-131)
For some parts 04 Inspection type active, due to this parts are
directly not transfered in rjo1.For these parts Quality Inspection
lots are created.
We don't want Quality Inspection lots at the time of scrap.
Plz. give any suggesionDear Deepali,
You are not Scrapping a Material, You are just transferring it to Scrap Location RJ01.
and as 04 insp. Type is active, and 131 Mvt is used, system generates an inspection Lot.
i think, by using 03 Insp. type will be beneficial.
you can transfer Scrap Qty to RJ01 without inspection lot.
Regards,
Amol -
Scheme on number of lots to be created at the time of GRN
Hi
I have a bit different scenario: raw material is batch managed. Now at the time of GRN in MIGO, the no. of line items for the same material varies. Sometimes its 25, sometimes 30 and so on.
Now the requirement is, can we control the inspection lot creation at the time of GRN. For example, when 25 line items, only 2 lots should go to quality. When line items are 50, 5 lots should be available in QA32, rest will be skipped.
In simple words, like sam[ling scheme, we need a scheme for no. of lots to be craeted for quality.
Any input on how to map that in SAP?Looks like a specific requirement, but how you want to control the creation of inspection lot depends on various factors. As you are saying a p.o has 25 line items of same material - assuming with diff quantities and it is batch managed - total qty will be received as one Batch? whats the crieteria ? Is vendor batch is one or multiple/many?
I did not understand how lnspection lot creation is based on the line items? You do have multiple options in the Material Master - QM view - control inspection lot for receiving inspection. Check them if they are not fit for your requirements, there is no ther way except writing your own piece of code in a user exit which is firing at the time of GR.
You can check user exit - QAAT0001 Program: EXIT_SAPLQAAT_002
Thanks,
Ram -
What are all the fields covered in the Raw file received from the Card Co
Hi Experts,
I want to know what are all the fields covered in the Raw file received from the credit card company say AMEX before uploading the data into ASP system i.e. CCD format file to be uploaded in T-Code PRCC
Some of the fields I know:
1. Name of the Employee
2. Company ID
3. Credit card number
4. Currency
5. Amount
6. Exchange rate
7. Date of Transaction
8. Description
9. Document no.
10. Expense type
11. Expenses paid by company
Waiting for a positive response from your side
Regards,Hi
The below mention is the possible values/records will be received from Banks regarding credit card expenses
ORGANIZATION / HIERARCHY HEADER RECORD
FIELD NAME
RECORD TYPE
TYPE INDICATOR
COMPANY NAME
COMPANY ID
SUB COMPANY ID
EFFECTIVE / FILE DATE
CCF VERSION
COMPANY NUMBER
TRANSACTION POSTING DATE START
TRANSACTION POSTING DATE END
FILLER
TRX CONTROL DATA
ORGANIZATION / HIERARCHY DETAIL RECORD
FIELD NAME
RECORD TYPE
TYPE INDICATOR
COMPANY ID
SUB COMPANY ID
CORP PARENT NODE
CORP CHILD NODE
PAST DUE BUCKETS RECORD
FIELD NAME
RECORD TYPE
TYPE INDICATOR
COMPANY ID
SUB COMPANY ID
STATEMENT DATE
AMOUNT PAST DUE
30 DAYS PAST DUE
60 DAYS PAST DUE
90 DAYS PAST DUE
120 DAYS PAST DUE
150 DAYS PAST DUE
180 DAYS PAST DUE
180 PLUS DAYS PAST DUE
PREVIOUS BALANCE
FILLER
TRX CONTROL DATA
CARDHOLDER HIERARCHY RECORD
FIELD NAME
RECORD TYPE
TYPE INDICATOR
COMPANY ID
SUB COMPANY ID
NODE ID
ACCOUNT NUMBER
FILLER
TRX CONTROL DATA
ACCOUNT HEADER RECORD 1
FIELD NAME
RECORD TYPE
TYPE INDICATOR
COMPANY ID
SUB COMPANY ID
PROCESSOR
ACCOUNT NUMBER
ACCOUNT TYPE
LAST NAME
CARDH FIRST NAME
CARDH MIDDLE NAME
ADDRESS LINE1
ADDRESS LINE2
ADDRESS LINE3
ADDRESS LINE4
ADDRESS LINE5
CITY
STATE / COUNTY/ PROVINCE
POSTAL CODE
COUNTRY
NATIONAL ID
TELEPHONE NUMBER
WORK PHONE NUM
ID VERIFICATION CODE
DATE OF BIRTH
CYCLE CODE
FAX NUMBER
E MAIL ADDRESS
EMPLOYEE ID
CLIENT ID / CUSTOMER NUMBER
CUSTOMER VAT NUMBER
TITLE
STMT DATE
GENDER
FILLER
TRX CONTROL DATA
MAIN TRANSACTION RECORD
FIELD NAME
RECORD TYPE
TYPE INDICATOR
COMPANY ID
SUB COMPANY ID
CBS TR RUN DATE
ACCOUNT NUMBER
TRANS DATE
TRANS TIME
POST DATE
FILLER
AUTH REQUIRED
AUTH ID
CONVERS DATE
POS ENTRY
POS COND CODE
ACQUIRER ID
REFERENCE NUM
TRACE NUMBER
FILLER
TRANS ID
MCC
MCC INFO DATA
MERCH ACCEPTOR ID
MERCH DESCRIPTION
MERCHANT CITY
MERCHANT STATE / PROVINCE
MERCHANT POSTAL CODE
MERCH COUNTRY
MERCHANT VAT NUMBER
MERCH DESC FLAG
MERCHANT REFERENCE NUMBER
SOURCE CURRENCY
SOURCE AMOUNT
BILLING CURRENCY
BILLING AMOUNT
SETTLEM CURRENCY
SETTLEM AMOUNT
US DOLLAR CURR
US DOLLAR AMT
GB POUND CURR
GB POUND AMT
EURO CURRENCY
EURO AMOUNT
ASIA YEN CURR
ASIA YEN AMT
SWED KRON CURR
SWED KRON AMT
CANADIAN CURR
CANADIAN AMT
CONVERSION RATE
DB CR FLAG
MEMO FLAG
CORP ACCT NO
SALES TAX
SALES TAX FLAG
VAT TAX
VAT TAX FLAG
PURCHASE ID
PURCH ID FLAG
TRAN TYPE
NO OF ADDENDUMS
VISA_MCI TRAN CODE
ADDENDUM KEY
TICKET NUMBER
MSG TYPE
FILLER
VAT EVIDENCE FLAG
CUSTOMER REFERENCE NUMBER
DISCOUNT AMOUNT
MESSAGE ID
SUMMARY COMMODITY CODE
CUSTOMER VAT NUMBER
FILLER
TRX CONTROL DATA
The above mentioned is Just 50% of data will be received form the banks. Still footer details have to added.
Thanks,
Nandagopal C
Edited by: Nandagopal Chiranjeevi on Feb 6, 2009 5:40 AM -
Different G/L code at the time of issue for projects .
Dear all;
here there is requirement :
Say we are having three different WBS element .for a particular Material ,at the time of issue it should goes to different G/L Code.How to map this in SAP system .
I have configured in OBYC setting as below :
GBB
Valueation Modifier general Modifier valueation Class G/L account
1101 VBR 3000(Raw Mat) XYZ
Kindly give me some solutDo you mean that every time you issue for a particular WBS element it should post to a differnt G/L account.
If thats you requirement then its not possible to post to a new G/L account every time when you are issuing a material.
The G/L account is determined based on the movement type, and creating new movement type every time to post into a G/L account is not feasible solution.
What you can do is post into a differnt cost object like a profit center or cost center to track down the costs by posting them at the time of Goods issue.
Thanks & Regards
Kishore
Maybe you are looking for
-
PrEl 8 slow and clips will not play in monitor window.
This is very dissapointing. I have been using PrEl 3 up till now and have been really happy with it. I decided to give V8 a whirl. First off, I am not happy with the way the whole interface has been dumbed down from 4.0 onwards. 3 seems to have more
-
How can I prevent a Magic Mouse on a new 27" iMac in another room to stop moving the cursor on my iMAC? Is there a pref. that needs set? As I know this isn't happening in the Apple Store, but it sure is at my home office! Please help.
-
How to create the composite application in CAF
Hi all, I am novice to the CAF. Till now i didn't implement a single application. any one can give me steps for how to create the composite application in CAF not in NWDS by using Netweaver 2004s. I opened CAF default page it showing admin tools ,tes
-
Develop module, camera calibration, Fuji X Pro 1 Camera Profiles question
In Lightroom 5.3 with camera raw 8.3, for my Fuji X Pro 1 lightroom is only showing "Adobe Standard." Is there a way to have it recognize the various shooting modes on the camera? The initial raw preview looks awesome, but as soon as lightroom builds
-
TTS or Exchange Partitions -- Opinion needed
Hi All, So i have two tables with the same structure, with the same partition key and they are both partitioned hourly, but they reside in two different databases (one of them is actually a datawarehouse). We have a requirement to move data from one