Raw Materail Quantity blockage on wbs level

HI Guru's
I am currently on the ETO based project where in on a particular WBS i may have no of production orders. Now client want the quantilty blockage for the raw material consumption in the order.
I know through availabilty control i can block the cost consumption.
Over here client want for a particuler production order the raw material quantity as well as the cost shud be blocked at wbs level.
ex raw material-- 2000kg and budget for production order -
5000000
so do we have any concept for the same?
Regards,
Kamal Rana

Wrong forum - this is the Basis forum here.
Please close here and create a new forum entry in the MM area
Markus

Similar Messages

Function modules to get wbs level budgets and activity level cost

hai gurus can any one tell me the function modules or any other bapis to get the wbs level budgets and activity level costs
thanx in advance
afzal

ok

Confirmed quantity in sales order level

Hai Guru,s
My client scenario is like this. He takes the order from customer. After saving the order he decides the confirmed quantity (more or less quantity)manually in order level without changing the order quantity.
I am trying in confirmed quantity in scheduline level it is in grey mode. Is it possible. Any inputs from your side please give me.
thank u very much
Regards Sree Sree

Dear Murali
Present legacy Client is following like this Customer order
Material X 100 quantity
Material Y 50 quantity
Material Z 150 quantity
In orderlevel I maintaing above all are order quantity. I am following make to stock only.system shows the confirmed quantity equal to order quantity based on the stock.
After that one authorization person changing the confirmed quantity only based on the demand of the product
Material X 50 quantity
Material Y 70 quantity
Material Z 150 quantity
And he is sending order confirmation sending to customer as a output. This output contains any changes made in what customer ordered quantity how much quantity company confirmed.
Suppose as u said If I change the order quantity after that i dont know how much quantity customer ordered.Suppose I want to confirm once again based on the customer order quantity this is not possible. this is client demand forecasting purpose also how much quantity order I am getting How much quantity I am delivering. wehich product is demand right now.
Thank u any inputs
Regards
Sree

BUDGET LOGIC TO BE IMPLEMENTED AT WBS LEVEL WITH 10% TOLERANCE

Budget Logic check at each WBS level allowing 10% tolerance and the project level budget to remain constant
The project structure or the project hierarchy is not fixed. The requirement is that the released budget should be allowed 10% above the present released budget. Also despite this change the budget at the project level should remain constant. The 10% surplus has to be adjusted from the other WBS if they have spare budget and if thereu2019s no surplus budget in any WBS then the system should throw an error. Available budget has to be checked against the PR/ PO creation each time so ensure that Purchase is not made in excess to the budget allocated. Procurement happens thru MM/PS both
Please advice

You can activate Budget availibility control aginst Overall Budget / Released Budget.
Infact, Budget availability control functionality is designed at WBS level only.
All you need to do is create required Budget profile and assign the same to your project profile.
For detail please refer this link
http://help.sap.com/erp2005_ehp_04/helpdata/EN/e0/c4a637f39a6a66e10000009b38f889/frameset.htm
http://help.sap.com/erp2005_ehp_04/helpdata/EN/d5/74a9371c726343e10000009b38f842/frameset.htm
Regards
Nitin

Reg: Capturing Cost at WBS Level

Hi
I have create two activities(one internal and other External) under one WBS Element.
I have complete the process of confirmation(for Internal activity) and Purchase process for external activity.
Now i can see both the planned and actual costs of those activities.
Now i want the see the costs at WBS Level, which is now happening.
pl guide me, where i can see and what will be the process.
Thanks & regards
pavan

Hi Pawan !
You can see all the Reports in project system under-
Logistic->Project System->Information System->Financial->Varius reports are given there
you can use Report-
S_ALR_87013533 - Plan/Actual/Commitment/Rem.Plan/Assigned
Thanks
Rewards Point if helpful
Regards
Smith

How to get cost at wbs level

hai gurus can any one tell is there any one tell is there any funciton module to get the cost at wbs level or any other method
thanx in advacne
azfal

Hi
Use the table BPEJ to Get the Full Year budget costs of all WBS elements
and actual costs by using the fun module
K_CO_OBJECT_BALANCE_GET
Reward points for useful Answers
Regards
Anji

Copy project description (defined in WBS Level 2) automatically to activity

Hi Gurus,
How to copy project description (defined in WBS Level 2) automatically to activity name/description?
For example:
WBS element (Level 2): "Telephone System Replacement"
When create a new Activity, the description will be: "Telephone System - xxxxxxxx"
The first 16 characters "Telephone System" from the WBS Level 2 are automatically populated to Activity Short Text field.
How to realize that?
Thanks.
JM

>
Virendra Pal wrote:
> you can use substitution rule
> transaction OPSN
> check out the standard substitution fields available
> if not you can always use an exit in substitution
>
> In the project profile enter this substitution and check the auto box
>
> This then on save will carry out substitution - use Intermediate save button and then add or replace the xxxxxxx
>
> Edited by: Virendra Pal on Nov 27, 2009 12:26 PM
Thanks Virendra!
I am new to PS, could you please explain in more detail?
In OPSN, I am not sure which one to choose: Network Header or Network Activity, for my case. Looks like there are no standard substitution fields available. Could you please check it out for me? If no, how to use an exit? Is this exit the same as a user exit used for enhancement?
Sorry, so many question marks. You help will be greatly appreciated!
JM

Settlement profile WBS level 3 to level 2

Good Day All,
Please advice, is there any configuration to automatically create settlement receiver to WBS to WBS .
We have requirement which is to make automatically generate settlement receiver from WBS level 3 to WBS level 2.
Our structure for example :
Proj Definition
WBS level 1
WBS level 2
WBS level 3 (automatically generate WBS level 2)
Is there any configuration in settlement profile or default rule?
Cheers,
Nies

I found the answer in another thread.
https://supportforums.cisco.com/thread/2144096

Write authorization of ACL at WBS level

Dear All,
We activated ACL (No inheri.) at WBS level.
According to my understanding in "write" authorization, we can just change the PS object but we can't delete the object.
We assigned "Write" Authorization to one user, but he is able to delete the object.
Please guide for the same.
Regards.

Hi Praddy,
Please check if the group to which this user belongs to doesn't have superior authorization. Refer to the below thread for more details.
Access Control List - Project System (PS) - SAP Library
Cheers
Sammar

Raw materail

our raw materail gl account is showing credit balance, what does it mean
rgds

Hi,
Please check whether 'negative stock' allowed indicator is set in the related Material Master.
Regards,
Narayana G.

How to load Cj01 create project for WBS level 1,2 and 3

Dear All
I want to load the project for WBS element.I had used IDOC project01 for the same but I am getting error as 'SaveReplica'method was not called up via ALE.I am presently trying with LSMW recording for tcode CJ01 in order to populate the
wbs levels 1 ,2 and 3 since the hierachy is not fixed i:e there is no limit as to how many 2 or 3 wbs levels are there so how shall i proceed with recording.If any body has migrated Projects for WBS elements please do share me.In my recording i am getting error 'Do not enter a level greater than 2'.is it that i have to carry t recording for each level seperately.
Tried with Bapi Bapi_project_maintain and all Bapis related to it most of the cases i am getting
error as to no initialization created though having executed Bapi_Ps_Initialization.
Regards
Somnath

Hi Somnath,
The BAPI, BAPI_PROJECT_MAINTAIN should work for any levels of requirement..and you dont need to initialize it. First, go through the documentation given in the SE37 transaction code. It will explain all. Just concentrate on the reference number. If you see in the example given there, two wbs elements are being created.
Then you have to use methods like create,save...unlike other BAPI's.
Just go through the documentation once.
Regards,
Vishwa.

Functional area change at WBS level

Hi Experts,
I just want know the possibility of functional area change at WBS level.
If we assign Functional area at project level, can we change functional area of WBS?
if it is possible then is it possible to assign/change functional area of WBS after releasing the same?
Please update me.
Thanks & Regards
Suresh. J

Hi Surej,
FA in project is in Basic tab and FA in WBS is in Assignement tab. Both functional area for Project or WBSes could be different. All this functional area could be changed. However, please note if you changed the FA once the data is posted into the WBS, the system will give a warning message not to change the FA. This FA in master data is to ease data entry. The FA will be copied over to FA area field during data entry. In fact, you can change the FA during data entry.
Hope this explains your query.
Thanks.
Regards
Fauzi

Resource Assignment at WBS level

Hello everyone,
I am a new user in Primavera.So I am having a lot of questions....Please see one of them........
Is there anyway in Primavera that we can assign resources at WBS level..If I can do that it could save my lot of time rather than assigning all the resources at the activity level...........
Any kind of help will be appreciated..
Thanks in advance

Thanks Akhtar & Michael,
I am agreed with your answer but when we looking at WBS window at the bottom you can see the tab called "Planning Resources" . Can anybody will suggest me what is a use of that funcnality & how we can use that (Note:- There is no option for assignment in that tab)
Thanks Guys. All your answers is appreciated
Regards
Nirav

TO MAKE PR QUANTITY, OPEN PO QUANTITY, MAX.,SAFETY & REORDER LEVEL IN Z REP

Dear expert
my client requirement is to make a single report which shows PUR.REQUISITION STATUS, OPEN ORDER QUANTITY IN PO, MAXIMUM STOCK LEVEL & MIN STOCK LEVEL,FOR PARTICULAR MATERIAL So that they make planning according to that . My problem is that i do not get exact table name & common field name to link it. please help me to do this.
Thanks in advance.

PR Quantity -> EBAN-MENGE
PUR.REQUISITION STATUS -> EBAN-STATU
OPEN ORDER QUANTITY IN PO -> try EKET or EKBE
MAXIMUM STOCK LEVEL - > MARC-MABST
MIN STOCK LEVEL -> MARC-EISLO or MARC-EISBE

Tolerance Limits at all wbs levels

Hi
In our client process we need Tolerance limits at all wbs elements for controlling budget process for ex in our process 5 to 10 wbs.
wbs XXXX01 tolerance limit =100%
wbs XXXX02 tolerance limit =102%
wbs XXXX03 tolerance limit =103%
Please advise to solve this issue
Regards
Sen

hi
Thanks for replay
here client will create po at each level of wbs element.and now for one wbs element they are willing to allow more value of limit form their budget.
Regards
Sen

Raw Materail Quantity blockage on wbs level

Similar Messages

Maybe you are looking for