Raw material costing - Valuation strategy with info-rec. "L" - Consignment

Hi all,
I want to implement raw material costing for all our raw material.
I created a new costing variant which use strategy "L"  (price from purchasing info-record).  My sub-strategy is 9 - Effective Price from PO followed by 5 - Effective price from info-record.
Everything works well except for consignment with vendor.
I have a raw that is procured from a vendor. The price for the raw is stored in the purchasing info-record and has condition types associated with it. This PIR is of CONSIGNMENT type. However, When costing the raw in CK11N the price for this consignment material is not pulled into the estimate.
I have seen in note 552486 that "For the valuation with a price from the info record, the system can basically only consider info records with category 'N' (normal) and 'L' (subcontracting). "
Have any of you come accross this situation? if yes, how did you resolve it?
Thanks in advance

Hi,
any other idea about this ?  I want to use strategy "L" but want to know if I can make it work with consignment.
Thanks

Similar Messages

  • Raw Material Costing with Overhead, Product Cost Planning

    Hi,
    I have an issue applying overhead to purchased raw materials. We need to apply this overhead for only a certain materials. So, I have defined a overhead key/overhead Group, and assigned the group in the material master of the raw material. The overhead is 2% freight on raw material costs.
    In the std.costing variant, I have assigned the costing sheet under Overhead on material components tab of the corresponding valuation variant. I have also included the Freight OH in the cost component structure.
    However, when I run the costing with CK11N for the raw material, it is showing only the raw material cost, not the overhead.
    What could be the problem?
    I appreciate your help.
    Thanks,
    Ram

    Is the overhead rate a percentage type or quantity based?
    Have you maintained both actual and plan rates (1 & 2) under define % based OH rates or Qty based OH rates accordingly?
    Does the validity date (in define OH rates )cover the date of costing?
    Is the Costing sheet assigned to the valuation variant at plant level?
    Is the OH base in the costing sheet includes the cost element of the raw material?

  • Valuation with material cost estimate: error with product

    Hi Experts,
    Message no. KE350, Valuation with material cost estimate: error with product "2286940000". Please suggest me to resolve this issue.
    Points will be provided for good solution.
    Regards,
    Jay

    Hi Jaya
    This means that your customization is wrong then...
    In KE4J or KEPC you have assigned costing keys to your material types or some other combination... You should have done this config in a way that costing key is not called  for in the case of non valuated materials...
    In Ke40 you have defined costing key where in you have specified "Issue error msg if no cost estimate found".. This costing key is assigned in KE4J or KEPC in a way that it is getting called even in case of non valuated materials...
    Do you have a separate mat type for non valuated material? If yes, remove this mat type from KE4J/KEPC..
    If you dont have separate mat type i.e. in the same mat type if you have both valuated and non valuated, then you have a problem.. You would get stuck in that case
    Regards
    Ajay M

  • Valuation with material cost estimate: error with product "117122"

    Hi people,
    We have the error:
    =====================
    Valuation with material cost estimate: error with product "117122"
    Diagnosis
    In Profitability Analysis (CO-PA), the system tried to valuate a line item using the current standard cost estimate.
    In order to determine the current plan period, the system needs to read the valuation segment of the material master.
    The system has found that the current plan period is not filled forproduct "117122" in plant "UBE1".
    We have the follow configuration in trans.: KE40:
    . Determine material cost estimate
       . Transf. Standard Cost Estimate
    . Costing Variant
    . Control Data for Standard Cost Estimate
       . Period Indicator = "Current Standard Cost Estimate acc. to entry in mat master
    . Addiitonal data CO-PC
        . Transfer cost estimate in controlling area currency  "activated"
    We think the reason about our error is because the field above is activated and some configuration more is necessary for this case. For examplo: Trans.: OKYW and this one was not configurated yet.
    Do you know what happend?
    If we need to configure some transation, or sonly process the cost estimate?
    Thanks,
    Rosana.

    Hello Guido
    Thank you very much for your return.
    It is happenning in a Client that some people are doing the configuration.
    Before we didin't have in KE40, the fiel "Transfer cost estimate in controlling area currency" activated.
    And now, the people activate that in this new Client and I don't know the impact about that.
    I think we have to make the configuration in OKYW.
    The other transation you told me, we don't have any information.
    Could you tell me some other idea what happend?
    Message error is just "Message no. KE350"
    Abou claculate the cost:
    It was calculated by trans.: CK11N for future planning and the real wasn't not possible to release because this material already have moviments.
    Could you tell us is there is some thing more to do?
    Thanks,
    Rosana.

  • Valuation with material cost estimate: error with product " 200038 "

    Hi,
    I am getting an error:
    Valuation with material cost estimate: error with product " 200038 "  (Message KE350).
    Kindly assist on the same?

    If this material is mto material go to t.code KE40 and maintain define access to standard cost estimate define cost key with
    "Transfer sales orde cost estimatex".
    If it is mts material define costing key with Transfer std cost estimate  and in costing data
    costing variant : ppc1
    costing verstion: 1
    period  indicator:  Release std cost estimate matching with goods issue or material costing matching posting date.
    This will resolve ur problem.

  • Raw material cost estimates

    HI experts,
    Currently we have the following scenario:
    There are some raw materials which are procured externally, and these materials are maintained with price control S
    Well, the problem is that the standard cost for the material consists of a few more components, for example:
    The standard price for the material X is 20 USD which consists of:
    - the price of the material itself : 15 USD
    - the import duty : 5 USD
    let's say if the actual import duty happened during IR is 6 USD, how can we get the variance from the difference between the import duty? I am unfamiliar with raw material cost estimate, but seeing that the import duty will be captured using condition type in PO, i assumed that we can use raw material cost estimates with this, and use the COPA report with record type B for this case.
    Could anyone give any suggestions regarding this case? It is better if it comes with step to step guide.
    Thank you very much in advance
    Regards,
    Erwin

    Hi Erwin
    1. The ideal design would have been Price Control V if the material is outright purchased... There by not leaving any scope for variances... You would agree that it is best to valuate inventory @ actuals as far as possible
    2. If you want to retain S, then release your Std cost as many times as the Base Price of 15 or Import duty of 5 usd changes... This will also avoid variances during MIGO.. However, it will throw up inventory revaluation figure each time u release new cost estimate
    Else, the variances will be updated to CO or COPA as per your choice in OKB9.... The record type will be B
    Are you not able to update variance to COPA?
    br, Ajay M

  • Raw material cost report for production of finished produt.?(urgent..REWARD

    Hi,
    any one can help in this issue.
    i am not getting the raw materila cost & manfacture conversion cost for  for the bom of FG - SFG - SFG - SFG- RAW
    FG - finished goods,
    SFG - semi finished goods
    RAW - raw material.
    plz provide the solution.
    raw material  and manfacture conversion cost is calculated in PERFORM z_process_data. subroutine.
    REPORT z_co_production_cost_nsk.
    TABLES: afko, bkpf, t001w , caufv.
    TYPE-POOLS: kkblo,
                slis.
    DATA: d_datefrom LIKE sy-datum,
          d_dateto LIKE sy-datum,
          d_repid LIKE sy-repid,
          d_uname LIKE sy-uname,
          d_returncode TYPE i,
          d_tabix TYPE i,
          d_kokrs LIKE tka01-kokrs,
          d_waers LIKE tka01-waers,
          wa_fieldcatalog TYPE slis_fieldcat_main,
          wa_listevents TYPE slis_alv_event,
          wa_listlayout TYPE slis_layout_alv,
          wa_print_info TYPE slis_print_alv,
          wa_listheader TYPE slis_listheader,
          d_headerlines TYPE i.
    DATA: BEGIN OF t_caufv OCCURS 0,
            aufnr TYPE caufv-aufnr,
            werks TYPE caufv-werks,
            objnr TYPE covp-objnr,
            gamng TYPE caufv-gamng,
            plnbez TYPE caufv-plnbez,
            rsnum TYPE caufv-rsnum,
          END OF t_caufv.
    *Added by Anand Bothra on 24/11/2003
    DATA: t_ab_caufv LIKE t_caufv OCCURS 0 WITH HEADER LINE.
    DATA: t_temp_caufv LIKE t_caufv OCCURS 0 WITH HEADER LINE.
    DATA: BEGIN OF t_afpo OCCURS 0,
            aufnr TYPE afpo-aufnr,
            posnr TYPE afpo-posnr,
            wemng TYPE afpo-wemng,
            amein TYPE afpo-amein,
            charg TYPE afpo-charg,
          END OF t_afpo.
    DATA: BEGIN OF t_afpo1 OCCURS 0,
            aufnr TYPE afpo-aufnr,
            refaufnr TYPE afpo-aufnr,
            objnr TYPE caufv-objnr,
            rsnum TYPE afko-rsnum,
            wemng TYPE afpo-wemng,
            werks TYPE afpo-dwerk,
            charg TYPE afpo-charg,
          END OF t_afpo1.
    DATA: BEGIN OF t_makt OCCURS 0,
            matnr TYPE makt-matnr,
            maktx TYPE makt-maktx,
          END OF t_makt.
    DATA: t_fieldcatalog TYPE slis_t_fieldcat_alv,
          t_listevents TYPE slis_t_event,
          t_sortsequence TYPE slis_t_sortinfo_alv,
          t_listheader TYPE slis_t_listheader.
    DATA: BEGIN OF t_production_costs OCCURS 0,
            objnr TYPE covp-objnr,       " Object Number
            kstar TYPE covp-kstar,       " Cost Element
            wkgbtr TYPE covp-wkgbtr,     " Cost of Line Item in CO area curr
            mbgbtr TYPE covp-mbgbtr,     " Quantity of Line Item
            matnr TYPE covp-matnr,       " Material Number
            kokrs TYPE covp-kokrs,       " Controlling Area
            belnr TYPE covp-belnr,       " Cost Accounting Document
            buzei TYPE covp-buzei,       " Item Number in Document
          END OF t_production_costs.
    DATA: BEGIN OF t_production_costs1 OCCURS 0,
            objnr TYPE covp-objnr,       " Object Number
            kstar TYPE covp-kstar,       " Cost Element
            wkgbtr TYPE covp-wkgbtr,     " Cost of Line Item in CO area curr
            mbgbtr TYPE covp-mbgbtr,     " Quantity of Line Item
            kokrs TYPE covp-kokrs,       " Controlling Area
            belnr TYPE covp-belnr,       " Cost Accounting Document
            buzei TYPE covp-buzei,       " Item Number in Document
          END OF t_production_costs1.
    DATA t_production_costs2 LIKE t_production_costs1
         OCCURS 0 WITH HEADER LINE.
    DATA: BEGIN OF t_suborders OCCURS 0,
            aufnr TYPE caufv-aufnr,
            prevaufnr TYPE caufv-aufnr,
            objnr TYPE covp-objnr,
            rsnum TYPE caufv-rsnum,
          END OF t_suborders.
    DATA: BEGIN OF t_outputtab OCCURS 0,
            plnbez LIKE afko-plnbez,             " Material Number
            objnr LIKE caufv-objnr,              " Object Number
            maktx LIKE makt-maktx,               " Material Description
            charg LIKE afpo-charg,               " Batch Number
            aufnr LIKE afko-aufnr,               " Production Order Number
            gamng LIKE caufv-gamng,              " Total Order Quantity
            wemng LIKE afpo-wemng,               " Goods Receipt Quantity
            amein LIKE afpo-amein,               " Unit of Measure
            yield TYPE p DECIMALS 2,             " Percentage Yield
            totalrmcost TYPE p DECIMALS 2,       " Total Raw Material Cost
            totalpmcost TYPE p DECIMALS 2,       " Total Packing Mat. Cost
            mfgconvcost TYPE p DECIMALS 2,       " Manu. Conversion Cost
            pkgconvcost TYPE p DECIMALS 2,       " Packing Conv. Cost
            rmperunit TYPE p DECIMALS 2,         " Raw Cost per unit
            pmperunit TYPE p DECIMALS 2,         " Pack Mat cost per unit
            ccperunit TYPE p DECIMALS 2,         " Conv Cost per unit
            totperunit TYPE p DECIMALS 2,        " Total Cost per unit
            waers LIKE tka01-waers,              " Currency Key for CO Area
          END OF t_outputtab.
    *Added by Anand Bothra on 24/11/2003.
    DATA: t_ab_outputtab LIKE t_outputtab OCCURS 0 WITH HEADER LINE,
          t_temp_outputtab LIKE t_outputtab OCCURS 0 WITH HEADER LINE.
    BEGIN OF INSERTION VIP110703
    DATA:wa_prev_outputtab LIKE LINE OF t_outputtab,
         wa_production_costs LIKE LINE OF t_production_costs.
    DATA:prev_totmatqty TYPE p DECIMALS 2,
         prev_tot_mfgconv_cst TYPE p DECIMALS 2,
         grand_mat_qty TYPE p DECIMALS 2 ,
         tmp_aufnr TYPE caufv-aufnr.
    DATA: BEGIN OF t_suborders_propcost OCCURS 0,
            aufnr TYPE caufv-aufnr,
            prevaufnr TYPE caufv-aufnr,
            objnr TYPE covp-objnr,
            rsnum TYPE caufv-rsnum,
            proprmcost TYPE p DECIMALS 2,
            prop_mfg_convcost TYPE p DECIMALS 2,
          END OF t_suborders_propcost.
    DATA: wa_suborders LIKE LINE OF t_suborders.
    END   OF INSERTION VIP110703
    BEGIN OF INSERTION VIP111003
    DATA: prev_aufnr TYPE caufv-aufnr,
          prev_matnr TYPE mara-matnr,
          curr_matnr TYPE mara-matnr.
    DATA: bln_suborder ,
          ratio TYPE p DECIMALS 5.
    BEGIN OF INSERTION VIP111003
    *Added by Anand Bothra on 28/11/2003
    DATA: d_flag TYPE c.
    SELECTION-SCREEN BEGIN OF BLOCK zblock1 WITH FRAME TITLE text-001.
    SELECT-OPTIONS: s_plnbez FOR afko-plnbez,
                    s_aufnr FOR afko-aufnr,
    "Added By Vivek on 29.11.2005
                    s_auart FOR caufv-auart obligatory.
    PARAMETERS p_werks LIKE t001w-werks OBLIGATORY.
    SELECTION-SCREEN END OF BLOCK zblock1.
    SELECTION-SCREEN BEGIN OF BLOCK zblock2 WITH FRAME TITLE text-002.
    SELECT-OPTIONS: s_monat FOR bkpf-monat NO-EXTENSION OBLIGATORY.
    PARAMETERS p_gjahr LIKE bkpf-gjahr OBLIGATORY.
    SELECTION-SCREEN END OF BLOCK zblock2.
    SELECTION-SCREEN BEGIN OF BLOCK zblock3 WITH FRAME TITLE text-022.
    PARAMETERS: p_detsum RADIOBUTTON GROUP rad,
                p_sum RADIOBUTTON GROUP rad.
    SELECTION-SCREEN END OF BLOCK zblock3.
    INITIALIZATION.
      d_repid = sy-repid.
      d_uname = sy-uname.
    p_werks = 'G001'.
    AT SELECTION-SCREEN OUTPUT.
    LOOP AT SCREEN.
       IF screen-name EQ 'P_WERKS'.
         screen-input = 0.
         MODIFY SCREEN.
       ENDIF.
    ENDLOOP.
    AT SELECTION-SCREEN ON s_monat.
      IF s_monat-high IS INITIAL.
        IF NOT ( s_monat-low BETWEEN 1 AND 12 ).
          MESSAGE e398(00) WITH text-023 text-024 space space.
        ENDIF.
      ELSE.
        IF ( ( s_monat-low LT 1 ) OR ( s_monat-high GT 12 ) ).
          MESSAGE e398(00) WITH text-023 text-024 text-025 space.
        ENDIF.
      ENDIF.
    START-OF-SELECTION.
      PERFORM z_get_period_dates.
      PERFORM z_select_prod_orders.
      PERFORM z_select_prod_costs.
      PERFORM z_select_addl_prod_costs.
      PERFORM z_select_mat_desc.
    END-OF-SELECTION.
      IF d_returncode EQ 0.
        PERFORM z_process_data.
    *Added by Anand Bothra on 24/11/2004.
        PERFORM z_select_to_print.
        PERFORM z_prepare_fieldcat.
        PERFORM z_get_alv_events.
        PERFORM z_define_sortsequence.
        PERFORM z_define_layout.
        PERFORM z_display_list.
    *Added by Anand Botra on 25/11/2003.
        PERFORM z_export_to_excel.
        PERFORM z_send_mail_and_download.
      ELSE.
        MESSAGE i017(p5).
      ENDIF.
    *&      Form  Z_GET_PERIOD_DATES
          text
    -->  p1        text
    <--  p2        text
    FORM z_get_period_dates.
    Determine the date range from the fiscal period range and
    fiscal year entered on the selection screen
      DATA: d_firstdate LIKE sy-datum,
            d_lastdate LIKE sy-datum,
            t_dates LIKE scscp_period_str OCCURS 0 WITH HEADER LINE.
      CALL FUNCTION 'FIRST_AND_LAST_DAY_IN_YEAR_GET'
        EXPORTING
          i_gjahr        = p_gjahr
          i_periv        = 'V3'
        IMPORTING
          e_first_day    = d_firstdate
          e_last_day     = d_lastdate
        EXCEPTIONS
          input_false    = 1
          t009_notfound  = 2
          t009b_notfound = 3
          OTHERS         = 4.
      CALL FUNCTION 'CSCP_PARA1_GET_PERIODS'
        EXPORTING
          i_datuv    = d_firstdate
          i_datub    = d_lastdate
          i_timeunit = 'M'
        TABLES
          et_dates   = t_dates.
      SORT t_dates BY sindex.
      DELETE t_dates INDEX 1.
      LOOP AT t_dates.
        SUBTRACT: 1 FROM t_dates-sindex,
                  1 FROM t_dates-datub.
        MODIFY t_dates TRANSPORTING sindex datub.
      ENDLOOP.
      CLEAR: d_datefrom,
             t_dates.
      READ TABLE t_dates WITH KEY sindex = s_monat-low.
      d_datefrom = t_dates-datuv.
      CLEAR d_dateto.
      IF s_monat-high IS INITIAL.
        d_dateto = t_dates-datub.
      ELSE.
        CLEAR t_dates.
        READ TABLE t_dates WITH KEY sindex = s_monat-high.
        d_dateto = t_dates-datub.
      ENDIF.
    ENDFORM.                    " Z_GET_PERIOD_DATES
    *&      Form  Z_SELECT_PROD_ORDERS
          text
    -->  p1        text
    <--  p2        text
    FORM z_select_prod_orders.
    Select all production orders as per the selection criteria provided
      DATA: d_dlv_code LIKE jstat-stat,
            d_teco_code LIKE jstat-stat,
            t_status LIKE jstat OCCURS 0 WITH HEADER LINE.
      SELECT SINGLE name1 INTO t001w-name1 FROM t001w WHERE werks = p_werks.
    if s_plnbez-low eq space and s_plnbez-high eq space.
    endif.
      SELECT aufnr werks objnr gamng rsnum plnbez
      INTO CORRESPONDING FIELDS OF
      TABLE t_caufv FROM caufv
      WHERE aufnr IN s_aufnr
    AND   auart IN ('PP01', 'LL02') : BY VIVEK
      AND   auart in s_auart " Added By Vivek on 29.11.2005
      AND   werks = p_werks
      AND   plnbez IN s_plnbez
      AND   getri BETWEEN d_datefrom AND d_dateto
      ORDER BY aufnr.
      d_returncode = sy-subrc.
      IF d_returncode NE 0.
        STOP.
      ENDIF.
    Filter out only those production orders that have a status
    DLV (Delivered) or TECO (Technically Confirmed).
      CLEAR: d_dlv_code,
             d_teco_code.
      PERFORM z_get_status_code USING 'DLV' CHANGING d_dlv_code.
      PERFORM z_get_status_code USING 'TECO' CHANGING d_teco_code.
      LOOP AT t_caufv.
        REFRESH t_status.
        CALL FUNCTION 'STATUS_READ'
             EXPORTING
              CLIENT           = SY-MANDT
                  objnr            = t_caufv-objnr
                 only_active      = 'X'
         IMPORTING
              OBTYP            =
              STSMA            =
              STONR            =
            TABLES
                 status           = t_status
            EXCEPTIONS
                 object_not_found = 1
                 OTHERS           = 2
        IF sy-subrc EQ 0.
          CLEAR t_status.
          READ TABLE t_status WITH KEY stat = d_dlv_code.
          IF sy-subrc NE 0.
            CLEAR t_status.
            READ TABLE t_status WITH KEY stat = d_teco_code.
            IF sy-subrc NE 0.
              DELETE t_caufv.
            ENDIF.
          ENDIF.
        ELSE.
          DELETE t_caufv.
        ENDIF.
      ENDLOOP.
      IF t_caufv[] IS INITIAL.
        d_returncode = 4.
        STOP.
      ENDIF.
    Added by Anand Bothra on 24/11/2003**********
      t_ab_caufv[] = t_caufv[].
    Added by Anand Bothra on 28/11/2003.
      IF ( s_plnbez-low EQ space AND s_plnbez-high EQ space ).
        IF ( s_aufnr-low EQ space AND s_aufnr-high EQ space ).
          d_flag = 'N'.
        ELSE.
          d_flag = 'Y'.
        ENDIF.
      ELSE.
        d_flag = 'Y'.
      ENDIF.
      IF d_flag = 'Y'.
    Added by Anand Bothra on 21/11/2003.**********
    *Get the batch number of the entered order
        DATA: itab_afpo LIKE afpo OCCURS 100 WITH HEADER LINE.
        DATA: BEGIN OF t_ab_charg OCCURS 0,
    *Added by Anand on 27/11/2003
                aufnr LIKE afpo-aufnr,
                charg LIKE afpo-charg,
                END OF t_ab_charg.
        LOOP AT t_caufv.
          SELECT aufnr charg FROM afpo INTO t_ab_charg WHERE aufnr =
      t_caufv-aufnr.
            APPEND t_ab_charg.
            CLEAR t_ab_charg.
          ENDSELECT.
        ENDLOOP.
    IF sy-subrc = 0.
       SELECT * FROM afpo INTO TABLE itab_afpo WHERE charg = d_ab_charg.
    ENDIF.
        LOOP AT t_ab_charg.
          SELECT * FROM afpo INTO itab_afpo WHERE charg = t_ab_charg-charg.
            APPEND itab_afpo.
            CLEAR itab_afpo.
          ENDSELECT.
        ENDLOOP.
        CLEAR t_caufv.
        REFRESH t_caufv.
    *Get all the orders with the same batch number.
        LOOP AT itab_afpo.
          SELECT aufnr werks objnr gamng rsnum plnbez
          INTO CORRESPONDING FIELDS OF
          t_caufv FROM caufv WHERE aufnr = itab_afpo-aufnr.
            APPEND t_caufv.
          ENDSELECT.
        ENDLOOP.
        CLEAR t_caufv.
        SORT t_caufv BY aufnr.
    delete adjacent duplicates from t_caufv comparing all fields.
      ENDIF.
      SELECT aufnr posnr wemng amein charg INTO TABLE t_afpo
      FROM afpo FOR ALL ENTRIES IN t_caufv
      WHERE aufnr = t_caufv-aufnr.
      d_returncode = sy-subrc.
      IF d_returncode NE 0.
        STOP.
      ENDIF.
      SORT t_afpo BY aufnr.
    ENDFORM.                    " Z_SELECT_PROD_ORDERS
    *&      Form  Z_SELECT_MAT_DESC
          text
    -->  p1        text
    <--  p2        text
    FORM z_select_mat_desc.
    Get the Description of all materials
      SELECT matnr maktx INTO TABLE t_makt FROM makt
      FOR ALL ENTRIES IN t_caufv
      WHERE matnr = t_caufv-plnbez
      AND   spras = sy-langu.
    ENDFORM.                    " Z_SELECT_MAT_DESC
    *&      Form  Z_PROCESS_DATA
          text
    -->  p1        text
    <--  p2        text
    FORM z_process_data.
    Process the data from all production orders and prepare the output
    table for display appropriately
      DATA: d_mbgbtr TYPE p DECIMALS 3,
            loop_cnt TYPE i.
      REFRESH t_outputtab.
      LOOP AT t_caufv.
        CLEAR t_outputtab.
        MOVE-CORRESPONDING t_caufv TO t_outputtab.
        CLEAR t_makt.
        READ TABLE t_makt WITH KEY matnr = t_caufv-plnbez.
        IF sy-subrc EQ 0.
          MOVE t_makt-maktx TO t_outputtab-maktx.
        ENDIF.
        CLEAR t_afpo.
        READ TABLE t_afpo WITH KEY aufnr = t_caufv-aufnr.
        IF sy-subrc EQ 0.
          MOVE: t_afpo-wemng TO t_outputtab-wemng,
                t_afpo-amein TO t_outputtab-amein,
                t_afpo-charg TO t_outputtab-charg.
        ENDIF.
        IF t_outputtab-gamng NE 0.
          COMPUTE t_outputtab-yield =
          ( t_outputtab-wemng / t_outputtab-gamng ) * 100.
        ENDIF.
        APPEND t_outputtab.
      ENDLOOP.
      SORT t_production_costs BY objnr kstar.
      LOOP AT t_production_costs.
        AT NEW objnr.
          CLEAR: d_mbgbtr, d_tabix, t_outputtab.
          READ TABLE t_outputtab WITH KEY objnr = t_production_costs-objnr.
          MOVE sy-tabix TO d_tabix.
          " Add up the Raw Material and Manufacturing Conversion
          " Costs from the previous stage production order
          CLEAR loop_cnt .
          LOOP AT t_suborders WHERE aufnr = t_outputtab-aufnr.
         commented by anand bothra on 20/11/2003
            ADD 1 TO loop_cnt.
            IF loop_cnt > 1.
              EXIT.
            ENDIF.
            LOOP AT t_production_costs1 WHERE objnr = t_suborders-objnr.
              CASE t_production_costs1-kstar.
                WHEN '0005000000' OR '0005010000'.     " Raw Material Cost
    BEGIN OF deletion VIP110703
              ADD t_production_costs1-wkgbtr TO t_outputtab-totalrmcost.
    END   OF deletion VIP110703
                  ADD t_production_costs1-wkgbtr TO prev_totmatqty.
                WHEN '0000500100'.      " Manufacturing Conversion Cost
                  ADD t_production_costs1-wkgbtr TO prev_tot_mfgconv_cst.
    BEGIN OF deletion VIP110703
                ADD t_production_costs1-wkgbtr TO t_outputtab-mfgconvcost.
    END   OF deletion VIP110703
              ENDCASE.
            ENDLOOP.
    BEGIN OF INSERTION VIP110703
           READ TABLE t_production_costs INTO wa_production_costs
           WITH KEY objnr = t_production_costs-objnr
                      matnr = wa_prev_outputtab-plnbez.
           IF sy-subrc = 0.
             IF  ( wa_production_costs-mbgbtr NE
                                   wa_prev_outputtab-wemng )  .
               prev_totmatqty = ( prev_totmatqty /
                                  wa_prev_outputtab-wemng ) *
                                 wa_production_costs-mbgbtr.
               prev_tot_mfgconv_cst = ( prev_tot_mfgconv_cst /
                                  wa_prev_outputtab-wemng ) *
                                  wa_production_costs-mbgbtr.
             ENDIF.
           ENDIF.
           LOOP AT t_suborders_propcost
                   WHERE prevaufnr = wa_prev_outputtab-aufnr.
             t_suborders_propcost-proprmcost = prev_totmatqty.
             t_suborders_propcost-prop_mfg_convcost = prev_tot_mfgconv_cst
             MODIFY t_suborders_propcost.
           ENDLOOP.
           clear: prev_totmatqty,
                   prev_tot_mfgconv_cst.
    END   OF INSERTION VIP110703
    BEGIN OF INSERTION VIP111003
            CLEAR: wa_prev_outputtab,
                   wa_production_costs.
            READ TABLE t_outputtab INTO wa_prev_outputtab
            WITH KEY aufnr = t_suborders-prevaufnr.
            ratio = 1.
            IF sy-subrc = 0.
              READ TABLE t_production_costs INTO wa_production_costs
              WITH KEY objnr = t_outputtab-objnr
                         matnr = wa_prev_outputtab-plnbez.
              IF sy-subrc = 0.
                IF  ( wa_production_costs-mbgbtr NE
                                      wa_prev_outputtab-wemng ) .
                  ratio = wa_production_costs-mbgbtr /
                          wa_prev_outputtab-wemng.
                  prev_totmatqty = ( prev_totmatqty /
                                     wa_prev_outputtab-wemng ) *
                                    wa_production_costs-mbgbtr.
                  prev_tot_mfgconv_cst = ( prev_tot_mfgconv_cst /
                                     wa_prev_outputtab-wemng ) *
                                     wa_production_costs-mbgbtr.
                ENDIF.
              ENDIF.
            ENDIF.
            LOOP AT t_suborders_propcost
                    WHERE prevaufnr = wa_prev_outputtab-aufnr
                    AND aufnr = t_outputtab-aufnr.
              t_suborders_propcost-proprmcost = prev_totmatqty.
              t_suborders_propcost-prop_mfg_convcost = prev_tot_mfgconv_cst.
              MODIFY t_suborders_propcost.
            ENDLOOP.
    *Commented by Anand Bothra on 20/11/2003.
            CLEAR: prev_totmatqty,
                    prev_tot_mfgconv_cst.
    BEGIN OF INSERTION VIP111003
          ENDLOOP.
        ENDAT.
        AT END OF kstar.
          SUM.
          CASE t_production_costs-kstar.
            WHEN '0000500200'.    " Packing Conversion Costs
              t_outputtab-pkgconvcost = t_production_costs-wkgbtr.
            WHEN '0005000500'.   " Semi-Finished Cost/Quantity
              MOVE t_production_costs-mbgbtr TO d_mbgbtr.
            WHEN '0005050000' OR '0005050001' OR '0005050002'.
              " Packing Mat Costs
              ADD t_production_costs-wkgbtr TO t_outputtab-totalpmcost.
            WHEN '0005000000' OR '0005010000'.
              ADD t_production_costs-wkgbtr TO t_outputtab-totalrmcost.
            WHEN '0000500100'.      " Manufacturing Conversion Cost
              ADD t_production_costs-wkgbtr TO t_outputtab-mfgconvcost.
          ENDCASE.
        ENDAT.
        AT END OF objnr.
          MOVE d_waers TO t_outputtab-waers.
    Calculations for the Production Order
          " Determine the RM Cost/Unit and Mfg Conv Cost/Unit
          CLEAR t_afpo1.
          READ TABLE t_afpo1 WITH KEY aufnr = t_outputtab-aufnr.
          IF ( ( sy-subrc EQ 0 ) AND ( t_afpo1-wemng NE 0 ) ).
    BEGIN OF insertion VIP110703
           tmp_aufnr = t_production_costs-objnr+2(12).
           LOOP AT t_suborders_propcost
           WHERE aufnr = tmp_aufnr  .
            ADD t_suborders_propcost-proprmcost TO t_outputtab-totalrmcost
             ADD t_suborders_propcost-prop_mfg_convcost  TO
                  t_outputtab-mfgconvcost.
           ENDLOOP.
    END   OF insertion VIP110703
    BEGIN OF insertion VIP111003
            CLEAR: t_suborders_propcost , tmp_aufnr.
            READ TABLE t_suborders_propcost
            WITH KEY aufnr = t_outputtab-aufnr.
            IF sy-subrc = 0.
             t_suborders_propcost-proprmcost =
                 t_suborders_propcost-proprmcost * ratio.
              ADD t_suborders_propcost-proprmcost
                    TO t_outputtab-totalrmcost.
             t_suborders_propcost-prop_mfg_convcost =
                 t_suborders_propcost-prop_mfg_convcost * ratio.
              ADD t_suborders_propcost-prop_mfg_convcost
                   TO t_outputtab-mfgconvcost.
              tmp_aufnr = t_suborders_propcost-prevaufnr.
              bln_suborder = 'T'.
              WHILE bln_suborder = 'T'.
                CLEAR: t_suborders_propcost .
                READ TABLE t_suborders_propcost
                WITH KEY aufnr = tmp_aufnr.
                IF sy-subrc = 0.
                  t_suborders_propcost-proprmcost =
                    t_suborders_propcost-proprmcost * ratio.
                  ADD t_suborders_propcost-proprmcost
                        TO t_outputtab-totalrmcost.
                  t_suborders_propcost-prop_mfg_convcost =
                      t_suborders_propcost-prop_mfg_convcost * ratio.
                  ADD t_suborders_propcost-prop_mfg_convcost
                       TO t_outputtab-mfgconvcost.
                  tmp_aufnr = t_suborders_propcost-prevaufnr.
                ELSE.
                  bln_suborder = 'F'.
                  CLEAR tmp_aufnr.
                ENDIF.
              ENDWHILE.
            ENDIF.
    END   OF insertion VIP111003
    END   OF deletion VIP110703
           t_outputtab-mfgconvcost = ( t_outputtab-mfgconvcost /
                                       t_afpo1-wemng ) * d_mbgbtr.
           t_outputtab-totalrmcost = ( t_outputtab-totalrmcost /
                                       t_afpo1-wemng ) * d_mbgbtr.
    END   OF deletion VIP110703
          ENDIF.
          IF t_outputtab-wemng NE 0.
            t_outputtab-rmperunit = t_outputtab-totalrmcost /
                                    t_outputtab-wemng.
            " PM Cost Per Unit = Total PM Cost / Quantity Delivered
            t_outputtab-pmperunit = t_outputtab-totalpmcost
                                    / t_outputtab-wemng.
            " Conv Cost Cost Per Unit = (Manu Conv Cost + Pack Conv Cost)
            "                           / Qty Delv
            t_outputtab-ccperunit = ( t_outputtab-mfgconvcost
                                    + t_outputtab-pkgconvcost )
                                    / t_outputtab-wemng.
          ENDIF.
          " Total Cost Per Unit = (RM Cost per unit + PM Cost per Unit
          "                       + Conv Cost per unit)
          t_outputtab-totperunit = t_outputtab-rmperunit
                                   + t_outputtab-pmperunit
                                   + t_outputtab-ccperunit.
    Update the calculated values in the internal table
          CHECK d_tabix GT 0.
          MODIFY t_outputtab INDEX d_tabix
                             TRANSPORTING totalrmcost totalpmcost
                                          mfgconvcost pkgconvcost
                                          rmperunit pmperunit
                                          ccperunit totperunit waers.
    BEGIN OF DELETION VIP110703
         MOVE t_outputtab TO wa_prev_outputtab.
    END   OF DELETION VIP110703
        ENDAT.
      ENDLOOP.
    ENDFORM.                    " Z_PROCESS_DATA
    *&      Form  Z_DISPLAY_LIST
          text
    -->  p1        text
    <--  p2        text
    FORM z_display_list.
    Display the Report
      CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
          EXPORTING
            I_INTERFACE_CHECK        = ' '
             i_callback_program       = d_repid
            I_CALLBACK_PF_STATUS_SET = ' '
            I_CALLBACK_USER_COMMAND  = ' '
            I_STRUCTURE_NAME         =
             is_layout                = wa_listlayout
               it_fieldcat              = t_fieldcatalog
            IT_EXCLUDING             =
            IT_SPECIAL_GROUPS        =
               it_sort                  = t_sortsequence
            IT_FILTER                =
            IS_SEL_HIDE              =
            I_DEFAULT                = 'X'
            I_SAVE                   = ' '
            IS_VARIANT               = ' '
             it_events                = t_listevents
            IT_EVENT_EXIT            =
             is_print                 = wa_print_info
            IS_REPREP_ID             =
            I_SCREEN_START_COLUMN    = 0
            I_SCREEN_START_LINE      = 0
            I_SCREEN_END_COLUMN      = 0
            I_SCREEN_END_LINE        = 0
            I_BYPASSING_BUFFER       =
            I_BUFFER_ACTIVE          =
       IMPORTING
            E_EXIT_CAUSED_BY_CALLER  =
            ES_EXIT_CAUSED_BY_USER   =
           TABLES
                t_outtab                 = t_outputtab
          EXCEPTIONS
               program_error            = 1
               OTHERS                   = 2
      IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      SET PF-STATUS 'Z_AB_STANDARD'.
    ENDFORM.                    " Z_DISPLAY_LIST
    *&      Form  Z_FILL_FIELDCATALOG
          text
    -->  p1        text
    <--  p2        text
    FORM z_fill_fieldcatalog USING      p_rownum LIKE sy-curow
                                        p_colnum LIKE sy-cucol
                                        p_fieldname TYPE slis_fieldname
                                        p_tabname TYPE slis_tabname
                                        p_reffield TYPE dd03p-fieldname
                                        p_reftable TYPE dd03p-tabname
                                        p_qfield TYPE slis_fieldname
                                        p_qtab TYPE slis_tabname
                                        p_sum
                                        p_stext
                                        p_mtext
                                        p_ltext
                                        p_datatype
                                        p_outputlen.
    Prepare the fields for ALV list output
      CLEAR wa_fieldcatalog.
      wa_fieldcatalog-row_pos = p_rownum.
      wa_fieldcatalog-col_pos = p_colnum.
      wa_fieldcatalog-fieldname = p_fieldname.
      wa_fieldcatalog-tabname = p_tabname.
      wa_fieldcatalog-ref_fieldname = p_reffield.
      wa_fieldcatalog-ref_tabname = p_reftable.
      wa_fieldcatalog-qfieldname = p_qfield.
      wa_fieldcatalog-qtabname = p_qtab.
      wa_fieldcatalog-do_sum = p_sum.
      wa_fieldcatalog-seltext_s = p_stext.
      wa_fieldcatalog-seltext_m = p_mtext.
      wa_fieldcatalog-seltext_l = p_ltext.
      wa_fieldcatalog-datatype = p_datatype.
      wa_fieldcatalog-outputlen = p_outputlen.
      APPEND wa_fieldcatalog TO t_fieldcatalog.
    ENDFORM.                    " Z_FILL_FIELDCATALOG
    *&      Form  Z_PREPARE_FIELDCAT
          text
    -->  p1        text
    <--  p2        text
    FORM z_prepare_fieldcat.
    Append all the display fields into the field catalog internal table
    First Row
      PERFORM z_fill_fieldcatalog USING 1 1 'PLNBEZ' 'T_OUTPUTTAB'
                                        space 'AFKO' space space
                                        space space space space space
                                        0.
      PERFORM z_fill_fieldcatalog USING 1 2 'MAKTX' 'T_OUTPUTTAB'
                                        space 'MAKT' space space
                                        space space space space space
                                        0.
      PERFORM z_fill_fieldcatalog USING 1 3 'CHARG' 'T_OUTPUTTAB'
                                        space 'AFPO' space space
                                        space space space space space
                                        0.
    Second Row
      PERFORM z_fill_fieldcatalog USING 2 1 'AUFNR' 'T_OUTPUTTAB'
                                        space 'AFKO' space space
                                        space space space space space
                                        0.
      PERFORM z_fill_fieldcatalog USING 2 2 'GAMNG' 'T_OUTPUTTAB'
                                        space 'CAUFV' 'AMEIN' space
                                        'X' space space space space
                                        0.
      PERFORM z_fill_fieldcatalog USING 2 3 'WEMNG' 'T_OUTPUTTAB'
                                        space 'AFPO' 'AMEIN' space
                                        'X' space space space space
                                        0.
      PERFORM z_fill_fieldcatalog USING 2 4 'AMEIN' 'T_OUTPUTTAB'
                                        space 'AFPO' space space
                                        space space space space space
                                        0.
      PERFORM z_fill_fieldcatalog USING 2 5 'YIELD' 'T_OUTPUTTAB'
                                        space space space space
                                        space text-010 text-010 text-010
                                        'QUAN' 17.
    Third Row
      PERFORM z_fill_fieldcatalog USING 3 1 'TOTALRMCOST' 'T_OUTPUTTAB'
                                        space space space space
                                        'X' text-011 text-011 text-011
                                        'CURR' 21.
      PERFORM z_fill_fieldcatalog USING 3 2 'TOTALPMCOST' 'T_OUTPUTTAB'
                                        space space space space
                                        'X' text-012 text-012 text-012
                                        'CURR' 21.
      PERFORM z_fill_fieldcatalog USING 3 3 'MFGCONVCOST' 'T_OUTPUTTAB'
                                        space space space space
                                        'X' text-013 text-013 text-013
                                        'CURR' 21.
      PERFORM z_fill_fieldcatalog USING 3 4 'PKGCONVCOST' 'T_OUTPUTTAB'
                                        space space space space
                                        'X' text-014 text-014 text-014
                                        'CURR' 21.
    Fourth Row
      PERFORM z_fill_fieldcatalog USING 4 1 'RMPERUNIT' 'T_OUTPUTTAB'
                                        space space space space
                                        space text-015 text-015 text-015
                                        'CURR' 21.
      PERFORM z_fill_fieldcatalog USING 4 2 'PMPERUNIT' 'T_OUTPUTTAB'
                                        space space space space
                                        space text-016 text-016 text-016
                                        'CURR' 21.
      PERFORM z_fill_fieldcatalog USING 4 3 'CCPERUNIT' 'T_OUTPUTTAB'
                                        space space space space
                                        space text-017 text-017 text-017
                                        'CURR' 21.
      PERFORM z_fill_fieldcatalog USING 4 4 'TOTPERUNIT' 'T_OUTPUTTAB'
                                        space space space space
                                        space text-018 text-018 text-018
                                       'CURR' 21.
    ENDFORM.                    " Z_PREPARE_FIELDCAT
    *&      Form  Z_GET_ALV_EVENTS
          text
    -->  p1        text
    <--  p2        text
    FORM z_get_alv_events.
    Returns table of possible events for a list type
      REFRESH t_listevents.
      CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
       EXPORTING
            I_LIST_TYPE     = 0
          IMPORTING
               et_events       = t_listevents
          EXCEPTIONS
               list_type_wrong = 1
               OTHERS          = 2
      IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ELSE.
        CLEAR: wa_listevents, d_tabix.
        READ TABLE t_listevents WITH KEY name = slis_ev_top_of_page
        INTO wa_listevents.
        d_tabix = sy-tabix.

    Hi Sai,
          You can try using MB51, use filter movement type 261. Add a filter for the posting date coverage.
    Then proceed. Click on the icon DETAIL LIST.
    Then click on the SUBTOTAL, add MATERIAL as a Criteria. The click the column AMOUNT IN LC.
    You should see the total issuances to per material.
    I hope this helps.
    Heinrick Palad

  • Price list change according to raw material cost

    Dear Experts,
    We are currently working in a client where for those products for which the raw material is the main component as the cost of the raw materials varies with a high frequency (daily or weekly) the list price (the price we want to invoice to customers) should be updated accordingly and automatically with a specific mark up.
    Have you found a similar requirement in any client? If yes, could you explain us from a functional perspective how (SAP standard functionality or custom development with a detailed explanation of the solution) you solved this requirement?
    Is there any procedure to do regular massive updates of Finished Good price lists based on the actual variation (and/or expected variation) of raw materials cost?
    Thanks in advance for your help.
    M.Baig

    Hi Baig,
    It is possible to determine the price based on the raw material cost. I dont know whether you are using Moving average price or standard price for the raw material cost.
    Whatever be the  method, when you create the sales order, it is possible to take the raw material cost on the date of order creation using one of teh cost condition types like VPRS. You can use this condition type as statistical.
    You can also have another condition type which is the mark up on this cost.
    Now you can calculate your grossprice using another condition type which total up the cost in VPRS condition type adn the mark up %, either through just configuration or by means of a calculation type routine created in VOFM adn then assigning the same for the gross price condition type.
    I you have any concerns, pls lemme know.

  • Reg. Process cost and raw material cost added

    Dear Friends
    Please consider our below scenario
    PO is created and stock is maintained in unrestricted (Raw material)
    and then Production order is created for Cut pcs and Raw material is issued to production order through 261 mvt type
    next Cut pcs is received against the production order through 101 Mvt type. Now operation cost is not added with the Raw material cost, only the Raw material cost is represents in MIGO-> FOOTER  - QUANTITY->Quantity in LC field.  What to do to calculate the process cost too.
    When we receive the cut pcs what we attached as component to the cutpcs's cost is calculated, the charge for Cutting is not calculated. we want both cutpcs charge(10.00 per pc)+component cost(raw mat. 180.00 per 1 kg)
    Cut pcs    10 pcs * 10 Rs   = 100 Rs
    Raw mat  10 kg * 180  Rs = 1800 Rs
    the total cost is 1900 Rs should come in that field
    Thanks
    Rajakumar.K

    Please give solution
    Thanks
    Rajakumar.K

  • CO/PP - Costing run - raw material cost component

    Hi
    In the costing run how raw material cost is taken?
    is it the material moving price/
    or calculated separately?
    Please help

    i think this depends on the costing variant defined in the order type
    in the costing variant, this come from the valuation variant
    for process orders you may check the following txns COR4, OPL1, OPN2

  • Reg.Calculate Raw material cost(Fabric)+Process cost(semifinished -cutting)

    Dear Friends
    Please consider our below scenario
    In AFS, PO is created and stock is maintained in unrestricted (Raw material)
    and then Production order is created for Cut pcs and Raw material is issued to production order through 261 mvt type
    next Cut pcs is received against the production order through 101 Mvt type. Now operation cost is not added with the Raw material cost, only the Raw material cost is represents in MIGO-> FOOTER - QUANTITY->Quantity in LC field. What to do to calculate the process cost too.
    When we receive the cut pcs what we attached as component to the cutpcs's cost is calculated, the charge for Cutting is not calculated. we want both cutpcs charge(10.00 per pc)+component cost(raw mat. 180.00 per 1 kg)
    Cut pcs 10 pcs * 10 Rs = 100 Rs
    Raw mat 10 kg * 180 Rs = 1800 Rs
    the total cost is 1900 Rs should come in that field
    Thanks
    Rajakumar.K

    Hi,
    Process cost is picked up though the activity you maintained in the routing.
    Pre requites
    1. Activity planning should be done through KP26.
    2. Work center should have right formula
    3. The standard value key which you using in routing should be there in workcenter formula.
    In production order ---> Goto -
    > Cost -
    > Cost analysis
    check whether you getting activity cost(In yours case Cutting cost)
    Regards,
    Vishal

  • How the raw material cost is picked in product cost in case of split materi

    how the raw material cost is picked in product cost in case of split material in BOM

    Hi
    In case of Std cost (CK11N), the planned price or MAP that you enter in the Parent accounting View will be considered for the cost calcualtoin purpose
    Parent view means the view which is above the 2 or more valuation types which consists of avg value of all other val types
    Ajay M

  • Raw material cost not coming KE30 profitability report

    Dear Gurus,
    We have two material type for our finished product for one material type without having cost release for current period we can't release the billing document for accounts but in other material type we can release the billing document for account without releasing the cost for current period.
    This occurs with problem that in KE30 we are not receiving the raw material cost & administration cost. Please suggest what should I do to correct this?
    Thanks in advance.

    Hi,
    I already assigned costing key to material type (FERT,HALB) but bifurcation of COGM not flow to CO-PA.
    In T.code KEPR
    1.All F/V i maintained as 3 is it ok or i need to maintain it 1 or 2.
    2.In T.code KE4J
    Record type = F i maintained for FERT,HALB category materials & assigned in Costing key
    Earlier before release i assigned in T.code ke4i
    Condition type             Value fields
    VPRS                          Stock value
    Then some value flow to copa
    After i release i removed stock value from ke30 report and added material cost ,sub contracting cost,material overhead but no value flown CO-PA.
    Pl check
    Regards,
    Debashis

  • Freight cost to be included in the Raw material cost while creating VL31N

    Hi all,
    We are purchasing raw material from other country. we are paying freight for the imported material.
    My requirement is, when doing inbound delivery freight cost has to be included in the raw material cost.
    Now its not getting included in the raw material cost.
    What are all the necessary steps to be done to include the freight cost into the raw material?
    Thanks in advance,
    Babu

    Hi,
    You can create dummy material inmaterial master record.
    You can enter the material manually while creating inbound delivery, which will come as unplanned delivery cost.
    Br,
    Tushar Patankar

  • How to update only Raw material cost(CK11n) in Material Master ?

    Hi Everybody,
    My client has a requirement where only raw material costs from the BOM should get updated in Material Master (Accounting 1 view in Standard Price field).
    But in Receipe & BOM for the Process Order, the client wants all Packing Materials and activites to be maintained.
    Pls help me in this regards,
    Ankita

    Hi Jagdish,
    Let me put it this way to explain you my problem.
    When running CK11n,
    Total Cost is =
    Total Raw Materials used Cost = QTY from BOM * Price from   Material Master
    +
    Total Packing Materials used Cost = QTY from BOM * Price from   Material Master
    +
    Total Utility cost = Qty from receipe * price in KP26
    When viewing the cost componenet view in CK11n tcode, I can view the break up as follows
    Raw Material Cost = XX rs
    Packing Material Cost = XX rs
    Overheads = XX rs
    Total cost = sum of all above XX rs ( this is the cost which gets updated when realasing price thru t code CK40n)
    But my client wants that at time of price relase, system should relase only total raw materil cost as standard price for the Finished Good in Material Master Accounting 1 view.
    I hope now you are getting me.
    Regards,
    Ankita

Maybe you are looking for

  • IBook sleeps immediately and doesn't respond

    Hello all, I'm having some trouble with my iBook G4 and I was hoping someone could help. Here's the scoop: I've had the computer for about a year and a half and it's been functioning quite well for the duration of my ownership (purchased new). Unfort

  • Table for transport request objects

    Hi, I need to copy the objects present in the transport request(Request/Modified) to any other transport request. Can any body tell me the table that stores the information regarding transport request. Pooja

  • Records in table TABW (productiv)

    Hello, in our productiv system there are some records which we consider to be trash and we want to delete it (transaction type not visible to customizing). We can do it in the development system in SE16 but the system is not creating a transport orde

  • Updating OM infotype with blank values

    Hi All We have a custom field included in one of the standard infotypes using a CI include. When I try to update blank the values in the infotype using transaction PP01, I get the error 'A record without data cannot be saved'. the custom field is a c

  • How can repeate the header in hierarical alv

    Hi all,    i want to display the two header for each key item in hierarchal ALV. please let me know if there any way to the above requirement. Regards Anil Kumar K