Raw material requirement needs to be updated

Hi all,
We are implementing PP and while configuring the WM/PP interface, I have the following requirement from my customer:
After creating and releasing production order 1, it creates T.O. for raw material A in the warehouse with qty 10 (for example).
After confirming the T.O. the raw material moves in the production staging area and is not used yet. Now if we have another Production order 2 using qty 15 of the same raw material, he wants the system to create a T.O. for for the delta qty 5(15-10) because we still have some previous raw material available.
How can I do that?
Thanks a lot
Chaka

Hy,
You need to change your checking rule (T.Code OPJJ)
remove tick from include reservation. or create new checking rule for that perticuller material.
                                        or
If you want to do it temporary purpose then tick final issue for that material in earlier order but it mean that now there is no need of this material for this perticuller order.
Regards,
Dhaval
Edited by: Dhaval Choksi on Jul 4, 2008 11:59 AM

Similar Messages

  • Simulated raw material requirement

    Hi Experts,
                     Is it possible to do a simulated planning to get raw material requirement in a list form without creating planned orders ?
                     If we start from LTP, as per my understanding the moment we copy a planning scenario through MS64 or change through MS32, the plan is taken into operative version. As SAP recommends MS02 or MS01 only after that, the planned orders we are getting should be operative only. So how do we get a simulated requirement of raw materials? Please clarify.
    Regards

    Hi Mangalraj,
    Thanks for your prompt reply.
    In other words, can i say that if i have 2 or 3 planning alternatives to choose from on the basis of material analysis, I have to create separate planning scenarios for each of these and run MS01 one by one for each of these scenarios and then against each of these runs i have to do the material analysis and save it for comparison.
    Does it also mean that while  doing each MS01 run, i have to choose "delete and recreate planning data" till I arrive at the appropriate version to choose from ?
    And does it also mean that there is no way to know the material requirement for planning alternatives without doing any MRP run ?
    Regards

  • Query for calculating raw material requirements for the remaining quantities in sale order.

    Dear SAP Experts,
    Clients requirement :
                                         Client wish to know the quantities of raw materials needs to run the production order inorder to complete the remaining quantities in sale order.
    Need Clarification:
                                  I"m using the below query for this requirement. I wish to know whether this query suits for my clients requirement or not. If its so, I need to know how to group by T4.[Code] (Raw material Name)   and need to get the sum of    T4.[Quantity]  (BOM quantity)      and  (T1.[OpenQty]*T4.[Quantity]) as TOTALQTY under each raw material group
    SELECT T0.[DocNum], T0.[DocDate], T0.[CardCode],T0.[CardName], T1.[ItemCode], T1.[Dscription], T1.[Quantity] as salesorderQty , T1.[OpenQty], T2.onhand, T4.[Code] as Raw material Name,T4.[Quantity] as BOMQTY,  (T1.[OpenQty]*T4.[Quantity]) as TOTALQTY FROM ORDR T0  INNER JOIN RDR1 T1 ON T0.[DocEntry] = T1.[DocEntry] INNER JOIN OITM T2 ON T1.[ItemCode] = T2.[ItemCode] INNER JOIN OITT T3 ON T2.[ItemCode] = T3.[Code] INNER JOIN ITT1 T4 ON T3.[Code] = T4.[Father] WHERE  T0.[DocStatus] ='o' 

    You're posting in the Portuguese B1 space.
    You might want to post in the English one: SAP Business One Application

  • Raw Material Requirement

    Guru
    My Client Wants material requirement plan for finished product
    For Example
    One plate of Size 1000 MM X1000 X 500mm in this sheet He wants the three type finished goods of  X, Y & Z of different
    How to Configure where & is their any cusomation required for this requirement.
    pl advise me for this senior
    Thanks in Advance
    Sudhir

    Dear Sudhir,
    Generally the sheet metals or raw materials which are to be represented in different sized section using one material code will
    be represented as a variable size item R as the itel category while maintaining the BOM for X,Y,Z.
    When creating the BOM of X,Y,Z include this sheet metal with item category as R and quantity as 1 ea or 2 ea as required.
    For this formula's will be maintained.
    Check these links also,
    Variable size Item
    Regards
    Mangalraj.S

  • Raw material procurement based on the LTP Plan

    Dear Friends,
    How can I create a procurement proposals based on the LTP Plan. For example for material A, I am doing the LTP planning for entire Year. As per the LTP plan I got the Raw material requirements. I don't want to make the total plan as active. That means I don't want to create PIRs for my finished material A for the entire year. But  as per the LTP plan of finished material A... I want to create a procurement proposals for the raw materials for the entire month through schedule lines... How can we do it?
    If any further clarification is required... please let me know.
    Regards.

    Hi,
    Based on the forecast for the material A, the simulative planned orders will generated for its raw material duirng the LTP run.
    If you want to convert hte planned proposal into PR then you can run MD43 for the particular Raw material.
    Before running MD43, in MS04 - set firming date and then run MD43, planned orders will get converted to PR (firmed). Then run LTP again using MS02 (then the planned orders get deleted)
    Please check and come back if you need any clarification
    Thanks,
    JK

  • Optimization of raw material while issuing from the stores

    Dear Techies,
    I need a small information regarding,Optimization of raw materials of "arc shape "while issuing from the stores it self.
    I will explain this with an example.
    Say we require a flange ring.This flange ring can be manufactured using three -120 deg segments.
    while calling the raw material below the flange rings material ,we have to give raw material dimensions of " 1X120 deg segment".System will accordingly multiply for the requirement of 3-segments.
    In this situation is there any possibilty to " Club" the raw material to minimize the scrap,ie., we can accomdate another segment just below the other segment.With this type of arrangement I can optimize raw material required.
    Is there any possibility in SAP that I can address this situation.
    Thanks In advance,
    With best regards,
    Kiran.

    Hello,
    according to my knowlege it is not possible in SAP.
    you have to create interface with Softwares like PRO-E sheet metal.
    Regards
    AM

  • How to create production order for multiple items having common raw materia

    Dear all,
    We are running a sheet metal fabrication company at Vadodara Gujrat.
    Please guide us how to create single production order for multiple items using single raw material??
    For example, We want to produce baby shirt(item code AAA001), shirt with full sleeve(item code AAA002), shirt with half sleeve(item code AAA003),shirt slim fit (item code AAA004),shirt loose fit(item code AAA005) from single raw material say(item code XXX001).
    Right now we have to create 5 production order to produce above 5 items of single sales order  in SAP B1 though it is made from single raw material which is foolishness and time consuming too. (Please also note that to produce any finfish good item, raw material required for that item may vary every time in our process.)
    Kindly guide us how to solve the problem.
    Thanks.
    RUPESH  +91-9227744273
    WEB : www.gorasia.co.in

    Hi Rupesh Gorashiya,
    This is possible through MRP for that you have to put Sales Order first and Run MRP Wizard
    MRP Wizard Put Multi Production Order as per Item Taking in Sales Order just click it on and execute.
    Thanks,
    Srujal Patel

  • Re : Reserved stock of raw material in MMBE

    HI
        While doing make-to-stock production the raw material purchasing from vendor is updated in both unrestricted use and reserved use. after finishing production the unrestricted stock is removed but the reserved stock is not removed.
    How to solve this.
    Thanls
    Mani

    Dear,
    Reserved stock which is showing in Stock overview or any other stock reports is not the physical stocks. These stocks are created with respect to reservation.
    You can't transfer the stock from reserved stock to Unrestricted stock. These reserved stock is just the information availble in Stock overview for the User that this much stock is pending for transfer with respect to reservation. So when you post the stock with respect to reservation then this reserved stock will automatically decreased with that posted stock for the material. You can't transfer that to unrestricted.MB1C will help you in this case with 261 movement.
    if set TECO status for your first production order, system will release the reserved stock, it comes to unrestricted stock.
    If it is not take place then to run the correction program Go to SE38 give RM06C020 and execute.
    Regards,
    R.Brahmankar

  • Raw Material - RG1

    Hi,
    My client is selling Raw material so he wants to update RG1 only for value not for the quantity
    if I maintain that material in J1ID my quantity as well as value also are getting update in RG1
    so how to solve this Problem?
    regards,
    Akshay

    hi
    Every Raw material  received or consumed/issued in factory are accounted in:
    1)     RG23 A Part I u2013 Quantity Register for Raw Material (Input).
    Excise Duty Credit availament & Utilizations are accounted in:
    2)     RG23 A Part II u2013 Excise Duty Register for Raw Material (Input).
    Just confirm with your client whether it is RG1
    If your client solds raw material and it will be a finished product for you then you have to maintain RG1.
    regards

  • Raw material Planning

    Suppose I am raising Sales order for same material from different plants.When i run MRP the sales order will be taken into consideration & it will create planned for base materail for which it sales order has been created.Will it create Planned order for
    the raw material required for manufacturing the base material if raw material is not available.

    Hi,
    If raw material is not available, then system will raise a PR automatically as per lot size you have specified in the material master.
    Regards / US

  • Minimum stock of raw material

    Hai gurus,
    My requirement is as follows:
    1) My fert material consist of 5 ROH
    2) The stock of all the ROH is to be maintained for minimum two days production qty.( 2 days inventory stock)
    How to maintain this minimum stock of ROH  and control under SAP
    waiting for the positive reply.
    Regards
    sekar chand

    Hai Bhramankar,
    Thanks for your rpely.
    In my case the material required for next three months is planned and procured by MM guys
    after MRP run .
    So the procurement is done and material is stored in central warehouse, and  raw material required
    for the next two days  production is issued to production ROH   stores and maintained as stock to avoid
    any shortage for final production.
    If it so how can we bring this scenario into SAP and keep track of total stock at central warehouse and two
    days dynamic stock by the shop floor people
    waiting for your detail reply.
    Regards,
    sekar chand

  • Single PR for Total Raw Material ( RM) Demand

    Hi,
    Business requirement is to plan the raw material requirement qty yearly based on the FG demand for the year. But problem is RM planning will not be for the current year. RM based on FG demand is planned one year ahead. How to generate the PR without considering the current year demand of FG qty. If 'A' is a raw material which is used in manufacturing of FG B,C,D etc. Requirement is to generate one PR which equals to the total qty of 'A' raw material requirement for manufacturing B,C,D etc. Also, in PR the total qty of 'A' should display the drop down of how much qty is required for B,C,D etc.
    Thanks & Regards,
    Ramagiri.

    Hi,
    Try using Long Term Planning.
    In the planning scenario maintain 'Do not consider current stock'.
    Tarang

  • Raw material requrirement

    guru,
    can we know raw material requirement for all production orders in a month.

    PLease try to ask the questions clearly ...
    For future requirement, In my understanding, there is no reports in SAP. FOr that u can develop z reports..
    But a small idea... If you can guess the number of production orders (say 100), then in Co01,create a production order for 100 numbers... then enter. See the BOm, It will give you the materials required.. Click the pushbutton "material availability" It will give you the missing parts list...( I hope this is the requirement which made u to raise the question)..
    And DONT save the order....
    karthick

  • How to update only Raw material cost(CK11n) in Material Master ?

    Hi Everybody,
    My client has a requirement where only raw material costs from the BOM should get updated in Material Master (Accounting 1 view in Standard Price field).
    But in Receipe & BOM for the Process Order, the client wants all Packing Materials and activites to be maintained.
    Pls help me in this regards,
    Ankita

    Hi Jagdish,
    Let me put it this way to explain you my problem.
    When running CK11n,
    Total Cost is =
    Total Raw Materials used Cost = QTY from BOM * Price from   Material Master
    +
    Total Packing Materials used Cost = QTY from BOM * Price from   Material Master
    +
    Total Utility cost = Qty from receipe * price in KP26
    When viewing the cost componenet view in CK11n tcode, I can view the break up as follows
    Raw Material Cost = XX rs
    Packing Material Cost = XX rs
    Overheads = XX rs
    Total cost = sum of all above XX rs ( this is the cost which gets updated when realasing price thru t code CK40n)
    But my client wants that at time of price relase, system should relase only total raw materil cost as standard price for the Finished Good in Material Master Accounting 1 view.
    I hope now you are getting me.
    Regards,
    Ankita

  • I can't open RAW files from new Sony Alpha a6000 camera in PSE 11 camera raw editor. Is there an update that will allow me to do this or do I need to always use DNG convertor?

    I can't open RAW files from new Sony Alpha a6000 camera in PSE 11 camera raw editor. Is there an update that will allow me to do this or do I need to always use DNG convertor?

    You would need to update to PSE 12, or just keep using the DNG converter. Your camera requires ACR 8.4, which isn't compatible with PSE 11. It's also not compatible with PSE 12 if you are running Vista or XP.

Maybe you are looking for