RAW pictures are half displayed all I am getting is pinkish resolution???

Anyone knows what is the issue here?
OpeningRAW files in Lightroom are displayed(not all of them)that way
most of them are displayed right but at the momemnt I click on them they become distorted this way

I only use adobe bridge to sort and choose the pics and then Lightroom to enhance them.
The funny thing is I download the pictures from Compact flash directly to portable hard drive...I choose them from there and relocate them onto my computer...
It never did that before..I occasionally get the corrupted pictures on the compact flash but now...looks like they are multiplying once I click on them on Lightroom...

Similar Messages

I have restored my new replacement iPhone 5s from my latest iCloud back up. However my camera roll pictures are not displaying. Its not saying i don't have any pictures, it just shows empty white squares? How do I get my pictures back? Thanks!

I have restored my new replacement iPhone from my latest iCloud back up. However my camera roll pictures are not displaying. Its not saying I don't have any pictures in my camera roll, it has all the spaces for them, but it just shows empty white squares? How do I get my pictures back? Thanks!

It's difficult to say whether it's stuck or not as the time to restore a backup can depend on many factors. You'll have to decide when you think it's just not continuing. You could try turning the phone off (hold the power button until you see the red off slider, then slide to turn off), then back on to see if that would get it going again.
When you're convinced it's just hung, you can go back to settings and tap Stop Restoring iPhone to stop the restore. You'll then have to try restoring it again (Settings>General>Reset, tap Erase All Content and Settings, go through the setup screens and when given the option, choose Restore from iCloud Backup). Be sure it's connected to your charger and wifi while it's restoring the backup.
You might also try the approach posted here by ezjules: https://discussions.apple.com/message/19518589#19518589. This seems to have worked for some people who had trouble restoring their photos from an iCloud backup.

Emergency! Please Help. I have an iPhone 4 with all my pictures from the vacation on it and I plugged into my computer and it sync'ed to my ipod. all of my pictures are gone. How do I get my pictures back?

Emergency! Please Help. I have an iPhone 4 with all my pictures from the vacation on it and I plugged into my computer and it sync'ed to my ipod. all of my pictures are gone. How do I get my pictures back?

If all you did was sync your phone, and if you haven't synced again since this happened, you can restore your phone from the backup that was created at the beginning of the sync process (camera roll photos are included in the backup). If you have synced again since this happened this backup has already been overwritten and your photos are lost. Also, if you restored your phone from the backup of your iPod, rather than just synced, then your photos are lost too.
If you have an intact backup that contains these photos, do the following:
Without connecting your phone, open iTunes on your computer and go to Preferences. On the Devices tab check "Prevent...from syncing automatically".
Connect your phone to your computer, right-click on the name of your phone when it appears in iTunes on the left sidebar and select Restore from Backup, choose your most recent backup to restore from.
When complete, you can go back to iTunes>Preferences>Devices and re-enable automatic syncing.

I just upgraded to the iOS 5 and icloud, but now all my pictures are gone! How do I get them back?

I have an iphone and just upgraded to the iOS 5 and icloud, but now all my pictures are gone! How do I get them back?? It's weird because it said with the upgrade your photos would be kept, but apps would be erased, yet my apps synced over and not my pictures...

I have EXACTLY the same issue. I would appreciate the response also. Was not prepared for this.

Got a new computer Loaded LR Copied back up from old computer and placed in LR folder in Pictures Open LR and opened catalog In Library all sub folders and pictures are listed However all pictures are only Gray no pic

Bought a New computer loaded - LR application-- appears to loaded ok. Copied Backup from old computer Wanted to have pics on new computer Saved Backup to LR folder in Pictures When opening Catalog all sub files and corresponding number of pictures are correct However all pictures are blank with gray color. Need to understand what I have done wrong.

Sam,
Sorry, wasn't to clear on my description (and wrong terminology)
The old computer was an OSX machine running iPhoto and I had a library of photos as well as a series of albums associated with that library.
The new computer, also an OSX machine running iPhoto, copied over the library from the old machine using the "migrate" utility. I didn't run it on the first time I ran the machine, but I ran it after I had been using the new machine for a couple of days.
What I can see on the new machine is all the folders in the Photo folder in the User folder have been copied over into the iPhoto folder. All the jpg files appear to be there.
When I open iPhoto on the new machine, it opens right away, and on the left side I can see the albums have all been imported but they are all empty. The library is also empty.
Not sure what I can do to keep my album organization.
I guess I have the option to add to library and just copy all the jpg files into the new machine, but doing this gets everything into the new library, but doesn't import any of the albums.

Adobe Bridge CC Smart Collections are not displaying all images in the folder

I'm having an issue with Bridge CC were I setup a smart collection to monitor my new photos. The folder contains over 300 photos, but is only displaying 160. The only condition I set is to have a minium file size of 10kb, so it should bring in all files since most are over 4mb. At first I thought it was a problem with the files themselves (permissions or something) but if I open the folder in bridge it easily displays all of the images easily. Any ideas?

I'm having an issue with Bridge CC were I setup a smart collection to monitor my new photos.
You might want to describe this workflow a bit more. Do you create this from an existing folder or are you adding new photo's?
A Smart Collection does not refreshes it self automatically. You either have to use the edit icon top right of the content panel to save again or deselect and select the collection itself to let it refresh the content.

RAW images are not displayed

I noticed today that one of my albums containing old RAW images (3 years old) are not shown in the preview. The images have been modified in an older version of iPhoto, but the change is gone. I can still open through Photoshop or iPhoto but do not see the edited version anymore ... Does anyone have a clue why?

Canon PS 9, 10 Canon EOS 300D, 40D ... all my previous cameras, but not all images. As said, there seems to be no rule. Some pictures in the middle of a "roll". But sometimes several events in succession. All images can be opened in Preview. All images can be displayed in the Finder and iPhoto QuickView. If I want to show the images in the preview, are shows the unedited version. If I want to edit the pictures back into iPhoto, then the old edits will become visible again (for some pictures) but they can not be saved.
I have about 35,000 photos in the library, spread over about 1600 events.

Pictures are not displaying but are there

Can anyone tell me, I did a restore yesterday and then all of a sudden my picture folders are not being displayed, when I go in they are there and it saysd the correct number of pics but it's just dark, can anyone suggest to have them dispalyed so I can view them properly?

Ohhhhh...more information ("doing the big update")...that may well be the root cause here. Depending on what you updated from, to, as well as the process you actually used, then you could have some corruption that is the root cause of all of this. Some report issues with the "automatic" methods of updating. Others report issues with the updated version itself. And combinations of both also exist.
The thing I recommend you do is an OS reload, very clean. Try first via LINK, which will keep you restricted to whatever OS levels your carrier has approved. If there are still problems, then try with an AutoLoader, which won't be carrier restricted and can allow you to move even beyond what your carrier has approved.
You may also need to avoid actually restoring from a LINK backup...sometimes, those reintroduce the very corruption that one is attempting to eliminate. Instead, manually first copy all of your files (pictures, documents, etc.) and take documentation of all of your accounts, added apps, configurations, etc. Then, after the AutoLoader, reconfigure manually and do not use LINK to restore (but you can recopy all of the pictures and such, just not via LINK).
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Websites are not displaying all graphics. Amazon does not show any buttons/links to place orders. My Yahoo home page is not complete. What do I do besides going back to IE?

Colors, icons, links, buttons for ordering on Amazon do not appear through Firefox, but do with IE. My Yahoo homepage is also missing a lot of graphics, pictures, etc. Text is all in blue rather than black

Stan -
Thanks again for the simple but valuable tip.
I'm just going to repeat the relevant sections from my previous post with the screenshots this time:
Below you'll see a snip of how my current folder structure appears. It's identical to yours, except there are no button files in the General Folder. Since you were kind enough to include a file name, I did a search on that specific one and it's nowhere to be found on my hard drive. Hmmm....
I've seen others remark on how... "challenging".... Adobe's instructions can be sometime. I'll admit to having the same feeling when I was trying to download and install all the content files and the 7-zip stuff. Is the answer somehow that I screwed up that? Note the 7-zip folder right above the Adobe folder. Here's a screen shot of that expanded folder contents:
Does that look like you think it should? Have I not installed or extracted something correctly?
Finally, the only other thing I can think of to give you as much info as you might need is to include a screenshot of where the "Functional Content" stuff got saved. Adobe's instructions about this (if I recall correctly) were that it did NOT have to be installed anywhere specific, but you then had to go into Encore (& Premiere) and through preferences point to this stuff, which I believe I did. But I don't see any button type files in these anyway.
Other thoughts or advice?
Thanks!

When I save web page on my HDD then when I try to open it the pictures are not displayed?

I have saved on my hdd webpage and folder with all pictures, but when I try to open it by doubleclick it open onli web page with text but picture stay clear (only borders)

Hi bikicviki,
Thank you for your question. I do not believe that the proper links have been updated to reference the newly saved file path of the local webpage that you saved.
Can you please check the webpage content that was saved to see if there is an image stored in a folder? They should be. If not, can you please provide an example webpage and I will try it? I tried this webpage and did not have any missing images.
Looking forward to your reply!

My pictures are taking up all my drive space

ok, so i am running out of space on my main hard drive but i have an external 250 gig hard drive. is there any way i can tell iphoto to look on my external hd for my photo library and than move my pictures to that spot?
(second, trickyer question) is there any way i can make it so that the "pictures" or "music" button on the left side of the finder window when cliked looks to my external drive instead of my main drive?
thanks for any enlightenment
Jack

Jack
1. Simply copy the iPhoto Library Folder from your Pictures Folder to the external. Then hold down the option (or alt) key and launch iPhoto. Then select 'Choose Library' from the resulting menu. Navigate to the new location of the library. From there on that will be the location of the library folder.
When you're sure that all is working well you can delete the iPhoto Library Folder on your internal HD.
2. No. But you can drag any folder to the side bar and it will be put there as a shortcut, and drag any out.
Regards
TD

Pictures are not displaying in jsp page

hi everyone,
i want to display background images in my jsp page
also some other images which are not background images
plz tell me the way that enables me to place images in my jsp page
thanx

<body background="pic/love.gif">
<%
--- jsp code
out.println("<img src='pic/vijay.jpg' height='100' width='100'>");
--- jsp code
%>
</body>

I was getting into iPhoto and got a message iPhoto needs to b e updated. I clicked and all my pictures are gone. How do I get them back?

I was getting into Iphoto and got a message that Iphoto needed updating. I complied and have lost all my pics? Where could they have gone?

There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

Popup pictures are not displaying on a website. How come?

Website has small pictures that should open in a popup to a larger one. The larger one doesn't display the picture. This works fine in Internet Explorer, so it's not the website that has the problem.

* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]

Text area not displaying all rows

I have a SQL query as the source for a text field that returns several rows. However, the text area (display as text (do not save state)) only displays the data from the first row in the query. How do I get the rest as well?

SQL as source assumes you will return exactly one value. If you return more, it only takes the first. Instead, use a function body and return a concatenation of what you want:
declare
l_retval varchar2(32767);
cursor c1 is select v1 from t ...
begin
for c1rec in c1 loop
l_retval := l_retval || chr(10) || chr(13) || c1rec.v1;
end loop;
return l_retval;
end;

RAW pictures are half displayed all I am getting is pinkish resolution???

Similar Messages

Maybe you are looking for