Raw pictures not sharp in photoshop

when I open a raw file in other programs like "ACDSee" it is sharp. when I open the same picture in photoshop it is not sharp.

Thanks for posting your observations here. You are correct, images viewed in Photoshop Express on Android devices can appear less sharp than when viewed in Gallery. There are reasons for this: performance and available memory. In order to display the image quicker, we are displaying a lower resolution version of the image. This does not effect the actual image though, so if you export the image it will maintain the expected resolution.
We hope to make improvements in this area and are investigating how to optimize this for our next update.

Similar Messages

Canon G7 x RAW will not open in Photoshop cs6

My new Canon G7 X RAW files will not open in Photoshop cs 6.
I downloaded the new plugin but still won't open.

it´s not supported yet.
you have to wait.

Camera raw is NOT there in photoshop CS 6 update from CS 5

I have just upgraded from photoshop CS5 to photoshop CS 6 and there is no camera raw plugin in CS 6. its not there at all. I can't update it because it isn't there..."could not complete the Camera Raw command because Adobe Camera Raw plugin cannot be found." I have installed the Photoshop CS 6 update 3 times to no avail. Camera raw will not update because there is no plugin to update. I am running Mountain Lion. 10.8.2

Please try below troubleshooting steps to resolve the issue:
If you are using Mac operating system try following steps:
Give read and write permissions to Application support folders from both the library's
Then re-install Photoshop CS 6.
Issue reason, lack of permissions to concern folders from your Library hence Photoshop is not able to access the camera raw or not able to install camera raw successfully.
above provided steps are the only resolution for this issue.
Regard's
Vijay.
birgit 1 wrote:
Thanks, that is interesting and something I had not previously noted. If I import RAW files to CR direct from a folder, it is still a NEF. But Aperture changes all NEF's to TIFFs. OTOH, at least I once again have my CR opening in PS.

Long Raw Picture not showing in adf

I have used following servlet to show long raw picture. the problem is in line
Blob blob = rs.getBlob("PLAN_PIC");
The oracle column is Long Raw and in ADF table this column shows as Raw. I have tried to use Raw class but could not identify proper functions. For example I used      Long blob=rs.getLong("PLAN_PIC"); it is ok but then how to get its buffered binary stream because getBinaryStream() does not work for long. I also tried to use to_blob function to convert long raw column to blob but it also gives ora-0932 error. The same table shows picture in oracle form and also Dot Net developer showed the same picture. Kindly help.
//servlet code is
public class imageservlet extends HttpServlet {
   // private static final String CONTENT_TYPE = "text/html; charset=UTF-8";   ( I checked both content types but nothing)
      private static final String CONTENT_TYPE =   "image/jpg; charset=utf-8";
    public void init(ServletConfig config) throws ServletException {
        super.init(config);
    public void doGet(HttpServletRequest request,
                      HttpServletResponse response) throws ServletException,
                                                           IOException {
        response.setContentType(CONTENT_TYPE);
        String imageId = request.getParameter("id");
       // String imageId="4000";
        OutputStream os = response.getOutputStream();
        Connection conn = null;
        try {
            Context ctx = new InitialContext();
            //Datasource as defined in <res-ref-name> element of weblogic.xml
            DataSource ds = (DataSource)ctx.lookup("java:comp/env/jdbc/DYEDS");
            conn = ds.getConnection();
            PreparedStatement statement =
                conn.prepareStatement("SELECT plan_no, plan_pic " +
                                      "FROM tblplanpics " +
                                      "WHERE plan_no = ?");
           // statement.setInt(1, new Integer(imageId));
            statement.setString(1,imageId);
            ResultSet rs = statement.executeQuery();
            if (rs.next()) {
               Blob blob = rs.getBlob("PLAN_PIC");
                BufferedInputStream in =
                    new BufferedInputStream(blob.getBinaryStream());
                int b;
                byte[] buffer = new byte[10240];
                while ((b = in.read(buffer, 0, 10240)) != -1) {
                    os.write(buffer, 0, b);
                os.close();
        } catch (Exception e) {
            System.out.println(e);
        } finally {
            try {
                if (conn != null) {
                    conn.close();
            } catch (SQLException sqle) {
                System.out.println("SQLException error");

The answers are the same as in your other thread https://forums.oracle.com/thread/2591893 about this issue.
Timo

PSE11 Export of RAW files not sharp

I am using PS Elements 11 with raw converter 7.3, processing .DNG files from a Samsung GX-10 on a PC.
I notice that, despite sharpening the image in the raw converter, that the preview (F11) in the organiser is not sharp. This is somewhat annoying.
However, even more annoying is the fact that the blurriness continues if I export the DNG from the organiser to a new JPEG, even if I set the quality at Maximum (12). The export and preview seem to be ignoring the sharpness I have set in the raw converter.
If I open the .DNG in the editor and then save the file as a JPEG straight away, all my sharpening remains intact, and the final JPEG is fine.
I have tried using setting the 'process' in the raw converter to '2010', and also tried setting the JPEG preview size to 'Full Size' in the RAW converter save options. Neither of these seems to make any difference.
For my normal workflow I edit the .DNG files using the raw converter, using the PSE editor only when necessary. I then use the organiser to export the .DNG files to JPEGs for printing, emailing or whatever. This workflow does not give me the results I expect any more.
It looks like I am going to have to open every processed RAW image in the editor and then save the files as JPEGs individually. Also the organiser preview does not give me an accurate preview of the quality of the processed file.
Has anyone else observed this, or have any suggestions for a cure or a revised workflow?
Bill.

Jon,
Thanks for the response and the tips, but I am happy with the sharpening I am applying in camera raw itself, but the problem occurs when I click the 'Done' button to save the results to the organiser, and then subsequently export to a jpeg.
For an example, this is how an oversharpened test shot appears on the screen in ACR 7.3 at 100% zoom with sharpening set to 150 (via print screen)...
Click Done and then export from the organiser (max quality) and this is the blurry result that appears:
This is also the sort of view I get in the organiser preview (F11) even at 100%.
If instead of clicking Done in ACR, I click Open Image and then save the image as a JPEG, this is what I get:
This latter image is what I would be expecting. (Of course I wouldn't normally sharpen my images like that!) In fact the exported raw images are much softer than the JPEGs that come straight out of the camera.
Maybe I am doing something wrong, and I am quite happy to be corrected, but I have been sharpening my images with ACR in PSE10 quite happily for a year or more. Its only since PSE11 and ACR 7.3 that I have noticed this issue.
Regards,
Bill

Olympus Micro 4/3 RAW Format not recognized in Photoshop

What do I need to install in Photoshop to recognized Olympus Micro 4/3 RAW Format?

It turns out that all I needed to do was download the latest version of the RAW update 6.6 for Photoshop 5.5 which includes the latest RAW formats for a number of newer released camera models from many camera companies. My camera model was listed in the Photoshop 6.3 RAW updates - Olympus Micro 4/3 P3 camera model. I downloaded and installed the latest digital camera RAW format update and installed it on my computer for Photoshop 5.5 and it worked perfectly allowing me to open the Olympus Micro 4/3 P3 camera model RAW format pictures, view and correct the photos in Photoshop.
I actually found the answer in Photoshop HELP, it just took me a while till I phrased my HELP Search properly for Photoshop.
Thanks for your prompt responses.
REVITMAN (Mel Persin, aia - BIM Consultant & Trainer}

RAW Image appears sharper in Photoshop than Aperture

Using the 20in screen Raw files that I have imported into Aperture 2.1.1 appear significantly less sharp than when the same file is imported into Photoshop CS3
I also have not found a way of significantly sharpening the Raw based image in Aperture -
The files are from an Olympus E3 with the current camera firmware installed.
Thanks for any suggestions.

adobe camera raw applies significantly more sharpening (and noise reduction) to images by default. I find the edge sharpen in aperture to be far superior, and i also feel i can squeeze just a little more detail out of my raw files in aperture, especially at higher iso's.
to sharpen, just select the image and press control-S and adjust to your liking. you can also tweak the sharpening applied by default to the images in the raw settings of each picture.
j

MSI GF ti 4200 - picture not sharp

Just bought a new MSI Gf4 Ti 4200 8X / 128 MB (MS-8894) .
Works fine but seems there are some problem with the graphic quality .....
The picture quality seems not as sharp as my ASUS GF 3 Ti 200. The MSI picture seems a bit blur compare to my ASUS which is christal clear. This picture refer to window desktop background.
Run 3D Mark and score 11,297 ... seems ok for a P4 2.66 machine......
Does anyone out there know what went wrong with my MSI graphic card ???

I dont know exactly what is your problem?
But if other OS is OK, this pretty much a driver issue.

Canon 5D RAW files not opening in Photoshop CS3

Windows Vista Home Premium SP1.
Hey Ho!
I did a photoshoot at a friend's studio last week, using his Canon 5D as it was all set up with the lights etc etc.
He saved the files for me as RAW - *.CR2 - as I am used to using with my 450D. The only difference I can see is that his files are numbered like this:
_MG_1791.CR2
whereas mine would have an "I" at the front - like it would be:
IMG_1791.CR2
I cannot open his files in my Photoshop CS3 - I get the error "Cannot complete your request as it is not the right type of file" or similar. I have no problems opening my own CR2 files from my 450D.
I have searched this issue on the Adobe forums, as well as other photography forums, and they say to download the plugin update remove the old one and replace it with the new. I have tried following step-by-step, but I still can't get it to work.
If anyone has come across a similar problem, I would be greatful to hear what you did.
Thanks in advance.

I am trying the DNG converter again, and it seems to be converting this time - maybe I didn't do it right last time... I hope that CS3 will be able to read the DNG files - will let you know how it goes shortly!

Photos not sharp in photoshop express

When I view photos on my Adnoir device using the built in gallery app the photos are very clear and sharp. When I view them in Phtoshop Express however, they are much softer, almost blurry. Why is this?

Thanks for posting your observations here. You are correct, images viewed in Photoshop Express on Android devices can appear less sharp than when viewed in Gallery. There are reasons for this: performance and available memory. In order to display the image quicker, we are displaying a lower resolution version of the image. This does not effect the actual image though, so if you export the image it will maintain the expected resolution.
We hope to make improvements in this area and are investigating how to optimize this for our next update.

Monochromatic Canon RAW pictures not imported correctly in iPhoto?

The Canon cameras have a setting to create only a RAW format of a picture (no jpg is created). I'm able to import the picture into iPhoto but the original custom settings are lost. For example, I took pictures on the programmed mode on monochromatic but the pictures are imported chromatic so the B&W effect is lost. The thumbnails in Finder do show the B&W picture for the RAW files.
How do import these RAW files so the iPhoto creates a jpg with the original settings (monochromatic) ?

There's no such thing as a monochromatic Raw. A Raw is a sensor dump from the camera. Your camera has an RGB sensor and shoots everything in colour.
What the mono setting does on your camera affects only jpegs. What you're seeing in the Finder is the Jpeg preview built-in to the Raw as an icon.
So, put simply, if you want to shoot B&W, shoot jpeg.
Regards
TD

New d610 raw pictures not recognized by pscs6 and brcs6

why does pscs6 and brcs6 not recognize my raw files from my new nikon d610 dslr camers. please help me

The d610 is listed as new camera support added in the latest ACR release. Have you updated your ACR to 8.3?

RAW picture not showing iphoto9

Hi.Ive just loaded a number of pics on to iphoto9,some are in RAW format,however, Im unable to open those for edit.
When I double click to enlarge I get a large exclamaition mark.when I click to edit I get a black screen in edit.
I believe my Canon 400d is compatable.
Ideas please,thank you.

Then the original library is damaged.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Pictures not sharp

I have a 15" Powerbook 1.67 80GB and have trouble viewing photos through the laptop´s monitor. Basically when I download and view the same digital files through my PC workstation & Powerbook side by side, the images are sharp on the PC as I know they really should be, but unsharp on the Powerbook. The clarity on my 1 year old Powerbook is dissappointing - they just look unsharp, so much worse than on my PC. Has anyone got an answer as they appear unsharp viewing the pics through whatever I use - be it Photoshop CS2 or iphoto. Any help greatly appreciated.

Are you viewing the same images at the same physical size?
The reason I ask is that one optical illusion that often gives the impression that the Macs aren't sharp is the different, smaller, dot pitch that is often used on PC screens (both desktops and laptops although especially laptops).
What the smaller pixel size does is to reduce the image when viewed at 100%. This reduction gives an appearance of greater sharpness. For instance, if I view your an image at 100% on my PowerBook Titanium and the same image at 100% on my PowerBook Aluminium the Aluminium will always appear sharper due to the smaller dot pitch (higher dpi). Then again, at 100% the physical size of the imaged when viewed is smaller on Aluminium.
Are you mistaking this optical illusion of greater sharpness for true sharpness?

I redownloaded my Photoshop CS5 and Camera Raw will not accept my RAW files nor will the Adobe Bridge display the picture view of these files. A message displays saying it doesn't support this camera. I have a Nikon 5100 DSLR Camera. It always displayed

I redownloaded my Photoshop CS5 and Camera Raw will not accept my RAW files nor will the Adobe Bridge display the picture view of these files. A message displays saying it doesn't support this camera. I have a Nikon 5100 DSLR Camera. It always displayed them in the past. How can I get it to display these photos in Bridge and open them in RAW?

Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 6.7 Update
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Camera Raw 6.7 Update
Benjamin

Raw pictures not sharp in photoshop

Similar Messages

Maybe you are looking for