RAW PlugIn bei CS2 funktioniert, Bridge nicht???

Hallo, ich habe die neue Canon 5D und habe den 3.2 Raw PlugIn installiert. Mein CS2 kann die Raw Dateien erkennen mein Adobe Bridge nicht... Was soll ich da jetzt machen?

Sie werden es nicht glauben, aber soweit war ich auch schon, jedoch gibt es Ihren Pfad nicht... Un per Suche nach dem alten Raw PlugIn bin ich auch ins Nirwana gekommen...
C:\Programme\Adobe\ jetzt kommen die Unterordner von PS 7 über PS CS und PS CS2 und unter anderem Adobe Utilities, Adobe Help Center, Adobe Bridge, Adobe Stock Photos und Acrobat 6.0 also geht es weiter mit Photoshop CS2\Plug-Ins und jetzt kommt nur noch PowerRetoucheDemo als Ordner also einen Zurück und ab in Zusatzmodule und dann in Dateiformat > Camera Raw.8bi reinkopiert und siehe da CS2 funktioniert aber Bridge immer noch nicht...
Ich habe früher schon öfters ein Plug-In installiert und es funktionierte auch immer, aber hier scheint es etwas anderst zu sein wie die anleitung es vorsieht... nicht wahr... Jetzt brauchen Sie bloß noch sagen, dass ich selber Schuld bin weil ich einen Win-Rechner habe,dann ist ihr Maß an Kompetenz erreicht...

Similar Messages

RAW-Plugin for CS2 in Windows 7

Hello,
I use Windows7 and CS2. Everything is fine, but I cannot find the right folder for The RAW-Plugin "Camera Raw.8bi" to display Raw-files in Bridge and Photoshop. Has anybody the same problem and found a solution? thanks in advance!

Is you Win7 64-bit or 32-bit?
For 64-bit the plug-in (Camera Raw.8bi) must be placed in C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\CS2\File Formats
If there is a copy anywhere else, delete it.

Problem opening up a RAW file with CS2

I just bought an Olympus E30 camera and shot in RAW. When I uploaded to my computer I was able to open them up with the Olympus editing program but when I try to open in CS2 it gives me an error message that it doesn't recognize the file. File example: _C181661.ORF

In order for photoshop cs2 to open the E30 files you need to use the 6.6 DNG Converter to convert your files to dng copies and then cs2 should be able to open them.
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5310
Also the newest camera raw plugin for cs2 is 3.7

RAW-PlugIn zeigt "nackte" NEF-Bilder in CS2, Bridge

Mit einer Nikon D70 gemachte IR-Bilder, gespeichert in NEF UND JPeG sehen im WinExplorer gleich aus. In Bridge f. Win SP sehe ich die RAW-Daten aber (augenfällig) ohne den gemachten Weißabgleich - sprich - (durch den roten Filter) als rote Bilder. Zwar funktionieren sämtliche Schieber des RAW-PlugIns, aber die gewünschte Farbstimmung bekomme ich nicht annähernd wieder. Mir scheint, die Steuerungsdaten der Kamera werden nicht berücksichtigt - auch bei anderen Aufnahmen Unter PS7 hatte ich dieses Problem nicht. Weiß jemand näheres!? Ich würde mich freuen.

How did you install the plugin? You may want to try reinstalling it or installing the dng converter, as that is what has the camera formats. ACR 8.2 is just the plugin for the mechanics of Camera raw. Normally they should both install, but sometime the converter doesn't.

Camera raw plugin für PSE10 und CS2 gleichzeitig möglich? ?

Hallo, ich habe PSE10 installiert und das plugin camera raw 6.7 .; für meine Camera Canon 60d. Das funktioniert gut.
Nun habe ich zusätzlich das CS2 installiert mit Bridge... und möchte meine Bilder da auch im RAW Format öffnen können,das geht bislang aber nicht. Kann ich ein 2. camera-raw plugin downloaden ( welches) und, wie mache ich das ?
vielen Dank für die Hilfe.
lg shanaja

It is not possible to update CS2/Bridge but you can convert CR2 files to DNG for use in CS2/Bridge.
Windows download click here DNG Converter 7.3
Mac download click here DNG Converter 7.3
You can convert a whole folder of raw images in one click. See this quick video tutorial:
You Tube click here for DNG Converter tutorial

What camera raw plugin for Photoshop CS2 + Canon Rebel T21

I still have the excellent Photoshop CS2 and bought a Canon EOS Rebel T2i. However, the raw files come up in Bridge without picture preview. The file is a CR2 file. When double-clicked, Photoshop 2 opens and gives error dialog:
"Could not complete request because not right kind of document."
I see that version 5.7 and 6.1 of Adobe Camera Raw Plug in are compatible with this camera. Can I use either plug in with Photoshop 2?

Congratulations on your decision to move up to Photoshop CS5. It's a good product.
I'm not sure exactly what you mean by your question, though...
In my own case, I have .CR2 files associated with a program called Irfan View so that when I double click a .CR2 file it opens immediately in this very fast image viewer program. All .CR2 files have embedded JPEG previews, and I can view these embedded JPEGs from my raw files instantaneously with Irfan View.
While using Explorer, if I want to open an image file with Photoshop (i.e., to do an actual raw conversion), I either drag the file and drop it on a desktop Photoshop icon -or- I right-click the file and choose Open With - Adobe Photoshop CS5.
Multiple versions of Photoshop will live happily side by side on the same system. You just can only run one of them at a time.
Most folks recommend leaving older versions of Photoshop installed. This allows you access to the version you're familiar with so that you can go back and check settings, save actions, etc. and it does provide you a backup editor if something should go wrong with the new one.
Assuming you have the disk space, you never really need to uninstall an older version of Photoshop, and in fact uninstalling Photoshop after installing a newer version is reported to cause problems in some cases.
-Noel

Raw plugin 8.2 doesn't open nikon d800 nef files in photoshop cc and bridge

raw plugin 8.2 doesn't open nikon d800 nef files in photoshop cc and bridge

How did you install the plugin? You may want to try reinstalling it or installing the dng converter, as that is what has the camera formats. ACR 8.2 is just the plugin for the mechanics of Camera raw. Normally they should both install, but sometime the converter doesn't.

Can't open RAW files in CS3 or Bridge

I am using PowerMac G4 running OS 10.4.10, one gig RAM, with an Nvidia Geforce 4 MX graphics card. Adobe Updated notified me the new Camera RAW plugin was available so I said yes to install it. The installer hung half way through and I had to force quit it. Since then I can't open RAW (Nikon NEF) files in Bridge or CS3. I get generic raw file thumbnails in Bridge and the error "Could Not complete your request because Photoshop does not recognize this file type" when trying to open one into ACR from Bridge or Photoshop. I tried d'loading the plug-in and manually putting it in the proper folder, still no good. I have reinstalled the program from the install disk, purged the main and folder cache in Bridge, deleted the PS preferences (command+alt+ shift when opening PS), repaired OS permissions, and the like, all to no avail. Photoshop or Bridge just don't see the plug-in when opening NEF files, though it does show in the "Bout P, which is in the proper place- root/library/application support/adobe/plug-ins/CS3/file formats/camera RAW Plugin
How can I fix it?

Greetings! I am having the same problem.
I'm a graphic designer (not a photographer), working on Mac 10.4.11, CS3 (ps is 10.0.1, bridge is 2.1.1.9) with the latest ACR plug-in (4.3.1) and the latest DNG Converter. Our photo library is on a server, accessed by multiple computers.
We can preview .CR2 in Bridge, open .CR2 in PS.
6However, we cannot preview or open .CRW files. We have tested on three machines, all with the same problem. In the past (before CS3) we were able to open and process these files.
Tried opening .CR2 files in CS2 and couldn't. Couldn't open them with DNG Converter or Graphix Converter.
Have tried all the standards fixes:
1. Correctly updated the most recent Camera Raw plug-in, following Adobes very explicit instructions as to where the plug-in goes (checked it three times).
2. Removed a copy of the Camera Raw plugin from a secondary folder, hoping that might have caused conflict.
3. Reset my preferences in Photoshop and Bridge to default.
4. Purged the cache in Bridge (via TOOLS, not in preferences) and refreshed AND told Bridge to build new thumbnails/caches
5. Closed/reopened Bridge.
6. Repaired permissions
7. Restarted my computer
We are going to try to find a disc with original RAW photos that have never been placed on the server to see if it's a server issue. However I'm thinking that's not the problem.
Any ideas as to why we can no longer open these CRW files?
I have two problems I need to solve:
1. For future photoshoots: does turning OFF sRAW setting help prevent this problem?
2. Is there anyway to convert the .CR2 files without using Photoshop CS3/2 or DNG Converter? We're hoping to try to salvage the photos we have.
I did see Elev Man's comment about the problem being corrupt files...disk failure/problem fixed with Disk Warrior. I'll also check that out.
Thanks!

Bridge: Metadaten (z.B Camera Raw und Exif) in der Bridge löschen

Hallo!
Ich versuche in der Bridge die Metadaten von mehreren Bilder, vor allem die Camera Raw Einträge zu löschen.
Funktioniert nicht?!
1.Über die Exportfunktion in Lightroom hat man die Möglichkeit die Metadaten durch nur copyright und Kontaktadresse zu ersetzen.
Kann man das irgendwie auch in der Bridge machen?
2.Warum gibt es eine Funktion Metadaten ersetzen wenn die Camera Raw Einstellungen in den JPG bilder nicht gelöscht werden?
3.Ebenso lassen sich die Camera Raw Informationen nicht durch eigens angelegte Metadaten ersetzen, auch nicht über den Umweg /Dateiinformation)
Grüße
Emmerich

1.Über die Exportfunktion in Lightroom hat man die Möglichkeit die Metadaten durch nur copyright und Kontaktadresse zu ersetzen.
Kann man das irgendwie auch in der Bridge machen?
No you can't, Bridge acts like a browser and reflects the contents of your disk. You can only use short cuts (start up scripts under menu Tools) to play actions for use through Batch in PS or the Image processor.
2.Warum gibt es eine Funktion Metadaten ersetzen wenn die Camera Raw Einstellungen in den JPG bilder nicht gelöscht werden?
You could make a feature request for this on PhotoshopFamily.com, however many people need this information and having an easy way to loose it might not be convenient for them.
3.Ebenso lassen sich die Camera Raw Informationen nicht durch eigens angelegte Metadaten ersetzen, auch nicht über den Umweg /Dateiinformation)
Those are merely copyright Metadata templates and only effects the fields you have assigned to them.
Try a third party solution like this:
http://www.sno.phy.queensu.ca/~phil/exiftool/

Where To Install Camera Raw Plugin

The oddest thing happened to me. I solved it, but I am hoping someone can provide me with an explanation:
1) I downloaded the lastest Camera Raw Plugin for CS3 and followed the installation instructions given at http://www.adobe.com/support/downloads/detail.jsp?ftpID=3893.
2) I still could not open my .dng files from bridge because I was still getting the message that I did not have the proper Camera Raw Plugin for CS3.
3) So, I did a search for all of the Camera Raw Plugins on my computer and found one located in Applications/Adobe Photoshop CS3/Plug-Ins.
4) So, I replaced the Camera Raw Plugin I had found in Applications/Adobe Photoshop CS3/Plug-Ins with the new one that I had downloaded from Adobe and previously placed in Library/Application Support/Adobe/Plug-Ins/CS3/File Formats as I had been instructed.
5) It worked, and now I can open my .dng files from Bridge into Photoshop. Why the discrepancy between what I was instructed to do and what actually seems to work?
Thank you,
Robert

Note that is your ROOT LEVEL library, NOT your user library.
That is the ONLY correct location for the Camera Raw plug-in. You should have no other such Camera Rawplug-in anywhere else in your setup [for CS3].
NameOfYourStartupDrive/Library/Application Support/Adobe/Plug-Ins/CS3/File Formats
Here's the link to the Adobe Camera Raw forum:
http://forums.adobe.com/community/cameraraw
Message was edited by: Ramón G Castañeda

How to Edit RAWs first in LR and cto ontinue in RAW in PS-CS2

After having edited RAW photographs in LR I would like to be able to continue my editing in RAW in PS-CS2. However when I go from LR to PS-CS2 with "edit in Photoshop.exe" it opens a PSD file and therefore I can not continue in PS-CS2 RAW.
What can I do?
Thanks for reply!

LR lacks the hooks to do what you want, pass RAW to ACR and then open in PSCS. Maybe some day. For now Export with XMP sidecar and open in PSCS from Bridge. As Geoff and Lee Jay indicate, ACR will pick-up what you havw done in LR and then you can continue from there. The only way for now.
Don
Don Ricklin, MacBook 1.83Ghz Duo 2 Core running 10.4.9 & Win XP, Pentax *ist D
http://donricklin.blogspot.com/

Thumbnail Preview for RAW Files Not Appearing in Bridge

Hello,
I'm running Adobe Bridge 5.1 on a Mac OS 10.9.2 (recently upgraded to Maverick) and I can no longer see thumbnail previews for my RAW files (which include .NEF, .CR2 and .RAF) though as of a few days ago this wasn't a problem. Not sure if it's related to the Maverick upgrade... but FYI, I do see thumbnail previews for .TIFF and .JPEG files.
I've already purged my cache generally and have also as a test chosen a local file to purge - that didn't work.
I've restarted Bridge at least 2x by pressing and holding the Option key.
I've also checked for Bridge updates - everything is up to date.
My Cache Options (within Preferences) are set to "Keep 100% Previews in Cache" and "Automatically Export Cache to Folders When Possible" - both checked.
Also downloaded the Adobe Camera Raw and DNG Converter 8.3, installed it but that didn't work.
I can't seem to find my Bridge cache folder or at least what's in the Library's "Caches" folder doesn't include anything for Bridge - see screenshot below.
Please help! Thank you in advance.

To me it seems related to your Adobe Camera Raw (ACR) converter. Clue inhere is you only miss the Raw files and have no problems in seeing other formats like jpeg and tiff.
The screenshot you delivered is from the wrong library, however, this same library (the one on system level) also is the location where you should be able to view the correct version of your ACR plugin. The path: library (same as per your screenshot)/Application support/ Adobe/ Plug ins/ CS6/ File Formats. inhere should be only one version of Camera Raw (called: "Camera Raw.plugin") and this should show version 8.3 (141).
I'm not sure about your bridge version number, Bridge 5 comes with PSCS6 but my most recent version of Bridge is 5.0.2.4.
Anyway, if you have only one ACR (8.3) installed in the above mentioned path then you might want to try to delete the Bridge plist file and Bridge cache file manually.
For this you have to Quit Bridge and find the user library (by default hidden, use menu Go in Finder and press option key to reveal).
Inhere find the plist file (user(your user name) / library / Preferences and inhere find and manually delete the file called: "com.adobe.bridge5.plist"
The in same user library find Bridge Cache. User/Library/Caches/Adobe/Bridge CS6. Inhere are 2 files, the adobe Bridge plug in cache and the folder called Cache. delete (or move outside libray) both items.
The restart Bridge (If needed also again hold option key to reset preferences) and this will create fresh files for the previous deleted items, leaving you with an almost out of the box factory set version of Bridge.

Cannot Open Camera Raw images in CS2

Hi
I am running CS2 and PSE 8,but cannot open Raw images in CS2
My camera is an Eos 5 MKII
Camera Raw in PSE is 5.5.
I would like to open the Raw files into CS2.
Any Help would be appreciated.
I am using the latest firmware from Canon.
Thankyou
Keith

Raw files are unique to each camera model and manufacturer. There is a 'model' field and 'manufacturer' field whose values are checked as any RAW format file is opened and if the program opening that file does not have the codes for processing that specific camera's RAW file, most programs will throw a error message and not precess that file.
For Adobe image editing programs you need to have the an ACR plugin version that provides the code for your camera model.
Camera Raw plug-in | Supported cameras list the various cameras supported by Adobe photo editing programs and the version of the earlies ACR plug-in that supports that camera.
For the Canon Eos 5D MKII you will need ACR plug-in version 5.2 or better.
Camera Raw-compatible Adobe applications list the program versions of Adobe image editing programs, the ACR plug-in version shipped with the program and the latest ACR plug-in version that that program can use.
The last ACR plug-in version for CS2 is 3.7, so you can not directly open the CR2 or RAW image from this camera. You could upgrade to PhotoShop CS5, the most current version of PhotoShop, or download a copy the free Adobe DNG, Digital NeGative, converter and convert your CR2 files to the Adobe DNG format and then open the DNG file with your copy PhotoShop CS2. You could also open the file with Canon image editing software and transfer the image as Tiff to your copy of CS2.
This is an Adobe Acrobat U2U forum, You might find additional help in the PhotoShop forums or an Canon U2U forum.
See Solutions to common problems in the PS forums, scroll down to the "Cannot open Camera Raw files." and follow the link to the KB article.

Camera Raw Plugin PSE6 MAC Not Working

I downloaded the latest version of Camera Raw Plugin for a MAC - for Photoshop Elements 6. I followed the instructions included in the readme file, copied the Camera Raw Plugin file to where the instructions said to but it doesn't work. From Bridge, from the "file" dropdown menu, instead of an option to open in Camera Raw, it says "Check Plugin". Since Camera Raw Version 5.3 didn't work, I deleted it and downloaded an earlier version (4.6) installed it as per the instructions but I still can't open a photo in Camera Raw. It still says to "Check Plugin". Any help would be appreciated.
Thanks, Gilda

Gilda:
Here is where I copied the Camera Raw Plugin file - Library/Application Support/Adobe/Plug-Ins/CS3/File Formats
Barbara, I don't know the first thing about this, but I do remember (when looking for something else) reading
http://kb2.adobe.com/cps/407/kb407456.html
which says that the latest plug-in should be put in the ../Adobe Photoshop Elements 6/Plug-Ins/FileFormats/ folder and the
equivalent Bridge folder.
As I say, I've no idea whether this has any bearing on Gilda's problem.
Noel

I need a camera raw plugin for sony raw files

Hello there, I got a new Sony A99 camera and I need a Camera Raw update for Adobe Bridge CS5. I can see my old Sony files from my A580 but the new once are not showing up. Where can I get an update for my CS5 bridge software?
Thanks
Fred

Which operating system are you using?
Have you tried Help>Updates from within photoshop cs6 to get either camera raw 8.3 or 8.7.1, which should enable photoshop cs6 to open the canon 5D Mark III files.
(version of camera raw depends on your operating system)
If that doesn't work try one of the following camera raw plugin installers:
Camera raw 8.7.1 plugin
https://helpx.adobe.com/x-productkb/multi/camera-raw-plug-in-installer.html
If you have windows xp or vista or mac os x snow leopard (10.6.8), then you'll have to use the camera raw 8.3 plugin installer:
https://helpx.adobe.com/x-productkb/multi/camera-raw-84-support-policy.html

RAW PlugIn bei CS2 funktioniert, Bridge nicht???

Similar Messages

Maybe you are looking for