Raw Read Error Rate, Errors occurred while reading raw data from a disk

hi
when I turn my pavilion dv6 2170ee computer on screen shows below error.
system diognostics (F2) does not any work
and when my windows7 comming up this error was shown.
I install Hard Disk Sentinel software and this program shows below:
Failure Predicted - Attribute: 1 Raw Read Error Rate, Errors occurred while reading raw data from a disk. Indicate problem with the disk surface or the read/write heads.
There are 28 weak sectors found on the disk surface. They may be remapped any time in the later use of the disk.
26848 errors occured during data transfer. This may indicate problem of the device or with data/power cables. It is recommended to examine and replace the cables if possible.
Replace hard disk immediately.
how can I fix it?
may drive format (Fdisk) and renewing windows can fix it?
tanx and regards
Mohammad

Hello mohkhosh,
I see that you're getting an error indicating possible hard driver failure, that you have this message from 3 different sources. I will try to help you with this.
After reviewing everything you're looking at needing to replace the hard drive. I would suggest contacting support to see what they can do for you.
HP Technical Support, North America 1-800-474-6836. For all other regions click here.
Thank you for posting on the HP Forums.
I worked on behalf of HP.

Similar Messages

Error occured while extracting the data from BSIK Table

Hi Experts,
I am trying to extract the data from "BSIK" by using generic extraction by table, I am getting the error "Invalid extractiion Structure template BSIK of Data source XXXXXX", But when i am trying the same by using VIEW, i am able to do it,
I am getting same problem while extracting the data from other tables like "BSIK, BSAK.........."
can some one explain me why it is throughing some error when i am doing generic extraction by using Table,
Thanks,

Hi,
Can you check below link:
Invalid extract structure template ZBW_VW_EKES of DataSource ZBW_SCN_VENDOR
Hope this answer your question!
Regards,
Nilima

Error code occurs while doing copy data from form to table

Error Code: -V: RABAX_STATE -e:UNCAUGHT_EXCEPTION
The ABAP call stack was:
Method: RAISEELEMENT_NOT_FOUND of program CL_WDR_CONTEXT_NODE

there was an error in your program lines
Please analyze the error and you can found the exact line of error in ST22 tcode
Once you open the st22, select your error and double click on it, then in left hand panel select " Source code extract".
then you wiil see your prg lines...
you will see the arrow like >>>>> in front of exact line error.
As per your errror seems, you have missed the node declaration part , some like that..any how check in st22
Regards
Srinivas

Error in source system while extracting the data from R/3!

Hi,
i had created FM and extract strcucture in R/3 .
using the above two, i had created data source using RSO2 T code.
when i checked the extractor ( RSA3 T code) in R/3 it was working fine .
(status messege displayed as 1000 records selected).
then i assigned this data source to infocurce and creted info cube using the same info source.
but when i schedule the info package it is syaing in the monitor screen "error in source system".
what could be the problem?
Thanks,
Ravi

Hi
trhese are the possiblies
1.first check the source system connection and find if there is any error in it.
2.Go to sm37 and find whether the request is completed or not if its terminated find out the time. how long does it takes to complete the process.
3.once again relicate the data source and find whether is it again extract data.

When trying to sync my iPad I am getting a message stating " iTunes could not connect to the iPad "iPad" because an error occurred while reading the device

When trying to sync my iPad I am getting a message stating that iTunes could not connect to the iPad "iPad " because an error occurred while reading from the device

Hi Centreless,
If you have difficulty with your iPad not being able to connect to iTunes in order to sync, you may want to try the troubleshooting steps in this article -
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thanks for using Apple Support Communities.
Best,
Brett L

Error while executing SSIS package - Error: 4014, Severity:20, State: 11. A fatal error occurred while reading the input stream from the network. The session will be terminated (input error: 109, output error: 0)

Hi,
We are getting the following error when running our SSIS packages on Microsoft SQL Server 2012 R2 on Windows Server 2008 R2 SP1:
Error: 4014, Severity:20, State: 11. A fatal error occurred while reading the input stream from the network. The session will be terminated (input error: 109, output error: 0)
SQL Server Data Tools and SQL Server Database Engine reside on the same server.
We tried the following:
Disabling TCP Chimney Offload
Installed Windows Server 2008 SP1
Splitting our SSIS code into multiple steps so it is not all one large continuous operation
The error occurs during a BulkDataLoad task.
Other options we are investigating with the engineering team (out-sourced, so delayed responses):
Firewall configurations (everything is local, so this should not make a difference)
Disabling the anti-virus scanner
Are there other things we can try?
Any insight is greatly appreciated.
Thanks!

Hi HenryKwan,
Based on the current information, the issue can be caused by many reasons. Please refer to the following tips:
Install the latest hotfix based on your SQL Server version. Ps: there is no SQL Server 2012 R2 version.
Change the MaxConcurrentExecutables property from -1 to another one based on the MAXDOP. For example, 8.
Set "RetainSameConnection" Property to FALSE on the all the connection managers.
Reference:
https://connect.microsoft.com/SQLServer/feedback/details/774370/ssis-packages-abort-with-unexpected-termination-message
If the issue is still existed, as Jakub suggested, please provide us more information about this issue.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Error while deploying an application on weblogic 12c. An error occurred while reading the deployment descriptor. The error was: Error processing annotations

Anyone please help me solve this error. I am trying to deploy an application on weblogic 12c i am getting an error but the same application gets successfully deployed on weblogic 11g. The error is
An error occurred during activation of changes, please see the log for details.
Exception preparing module: EJBModule(gsCallbackAdapterLGTX-ejb.jar) An error occurred while reading the deployment descriptor. The error was: Error processing annotations: .
[EJB:015001]Unable to link class com.aep.gridsmart.adapters.lgtx.buslogic.deliver.xform.AdapterTransfomerDeliverSession in Jar /appl/oracle/middleware/WLS/12.1.1.0/user_projects/domains/Gridsmart/servers/ManagedServer1/tmp/_WL_user/gsCallbackAdapterLGTX/34vz4d/gsCallbackAdapterLGTX-ejb.jar : java.lang.NoClassDefFoundError: com/aep/gridsmart/adapter/deliver/CommonAdapterDeliverBean

Cotton please let me know what is the mistake i am
doingThe following path does not exist.
C:\Sun\AppServer7\domains\domain1\server1\
applications\j2ee-modules\task_1\WEB-INF\web.xml

"error occured while reading from device"

when trying to sync our itouches the device is initailly recongnized in itunes and will begin to sync , but never gets through the whole proccess - each time it gets to a different step, but always ends with error message "ipod cannot sync as an error occured while reading from device" or something close to that...any ideas or help please....
i have checked the usb drivers...uninstalled and reinstalled itunes and removed the security software that I can find....

It could be to either a problem with a "file" that is either one the iPod or on the computer that is trying to be read for syncing. I would in order:
- Reset the iPod:
Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore the iPod via iTunes. First from backup then to factory defaults/new iPod.

Error 4014 Severity 16 State A fatal error occurred while reading the input streamfrom the network

We encounter following error intermittently Error 4014 Severity 20 State 16 , A fatal error occurred while reading the input stream from the network
I have checked the RING_BUFFER_CONNECTIVITY from sys.dm_os_ring_buffers, we are able to find the remote_host IP where connections are being closed/killed, the error being logged in sys.dm_os_ring_buffers, comes from multiple remote_host, we have raised
to O/s and Networking Team they seem to have no clue, why this error occurs
Server: Virtual Machine
Operating System: WINDOW 2008 R2 SP1
MSSQL 2008 STD ED SP3 10.0.5850.0
Database mirroring is configured for the application database.
Antivirus enable on the database server
How do we find the cause for this error being logged in SQL server logs, is this error due to SQL database mirroring or memory issue?
What needs to be checked on the O/s and Network, I have been checking on the internet and everywhere it is pointing to NIC drivers or security patches
Also in the system events following error was being logged, but after restarting the vm service this error has not re-occurred
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the VMTools service
Kindly suggest on Error 4014 Severity 20 State 16, A fatal error how to resolve
[email protected]

Hello,
Could you try to use Network Monitor or WireShark to examine if the connections resets are coming from a client computer
or from the host where SQL Server is installed?
Network Monitor can be downloaded from the following link:
http://www.microsoft.com/en-us/download/details.aspx?id=4865
If you use Network Monitor trace you will identify connection resets by looking for “TCP: Flags=,,R.A” at the description column on the Frame Summary. Once you find the flag, the Source column will tell you the identity of the host resetting the connection,
maybe is not the SQL Server host.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

An error occurred while reading document

Hello all,
First let me apologize for the lengthy post, but I want to be clear. :-). Ever since I upgraded my iPad 2 to the newest iOS 8 release, I have had issues with my tablet. It is running slower, as I type this out there is a delay with the press of each letter. I have to wait until each letter is typed before moving on to the next section when filling out forms for example. Openings apps has also been slower and several apps have crashed unexpectedly. While visiting websites the connection is also slower and while searching for items on Google, the search results are listed but when I try to click on one of the items, not happens. The links are not available but they are listed. I have to switch to another app or refresh the page or sometimes both in order to be able to click on one of the results.
But the most annoying issue is that I cannot open attachments up from my iOS email now. Before I was able to open the attachment and see a preview of the attachment whether it is word, excel, PowerPoint, etc. I would then open that attachment in my word processing app to edit or open the file in a pdf converter for publication, But now when I get an attachment and try to open it from iOS mail, I get a blank page with the document file name and "Microsoft Word 97-2014 document" and the size of the document. These files are files that I edited in a word processing app, CouldOn, which I then email to myself so that I may get the file into my pdf converter app. I have done this several times before the upgrade now.
I also tried to open the file in my pdf converter app even tho it was not showing in the iOS Mail preview, but then I get an error message stating "An error has occurred while reading the document".
This is really frustrating. I have googled my issues but didn't really refined any solutions, I did find some others had similar issues but they were with other previous versions of iOS, not the one I have now. Can anyone help me out here? This has basically caused my work to stop, if I cannot be sure that attachments are not going to have any issues when they are sent to clients, then I cannot send them, I need to get this fixed ASAP. Has anyone else had these issues?

Adding to above, I have latest update for Pages. I can open documents on my iPad that are not locked. But now, I can't get to the "lock" buttons to unlock it. On my Mac, iCloud and share document is on.

Move to new computer, get "An error occurred while reading files or writing files to disc. The disc

I tried to move my PE6 install and catalog to a new computer. It was on a Dell Windows XP machine, and I moved it to a Toshiba Windows 7 (64 bit) machine. I have always kept my photo files on an external hard drive. My photo library is 50GB, 10,000 files. Here is what I did.
Copied the original PE6 install file to the Toshiba. Installed but didn’t activate it.
Copied the entire My Catalog folder to the proper Windows 7 location.
Plugged the external drive into the Toshiba. Made sure the same drive letter as before (E).
Fired up PE6 on Toshiba. Looked good in Organizer. Everything seemed to be there, but I didn't try to make changes at that point.
Deactivated PE6 on the Dell. Activated on the Toshiba.
Then I realized that it is not right. I can edit Keywords and Rating stars on the pics, but not dates, captions or notes. I get “An error occurred while reading files or writing files to disc. The disc may be full or there may be problems with the source media.”
Only a fraction of the external drive is in use.
I can access the files on the external drive with another app (Windows Photo Viewer).
I tried Reconnect All Missing Files. Somewhat ambiguously, it says “There are no files to reconnect.”
In the properties in the Organizer for each picture are the proper file names and paths. Folder view works fine in Organizer.
I can put new files in the same external drive directories, import them into PE6, then edit them normally.
What is the easiest way to get Organizer properly connected to my files? I suppose I could reimport all the pics on the new machine, but I assume I'd lose some of my metadata. So that is out of the question.
Thanks,
Bill

Are you sure that file paths are correct? I say this because under XP they would have originally pointed to Documents & Settings/My Pictures whereas on W7 it will be User/Pictures, albeit you are using an external hd.
Take a look at this knowledge base note on the correct procedure for back-up and restore.
I think writing metadata to files for such a large catalog will be a thankless task.
http://helpx.adobe.com/photoshop-elements/kb/backup-restore-move-catalog-photoshop.html

Error message, what does this mean: Itunes couldnt connect because an error occured while reading from the devise?!?!?! HELP

I'm trying to connect my iPAD to my desktop but I receive an error: itunes couldnt connect because an error occured while reading from the devise?!?!?! HELP

have you done a update for your itunes this can be the problem that it will not connect to you ipad so update you itunes and then try it again

HT4528 I can't seem to sync my iPhone with iTunes. I keep getting this message: iTunes could not connect to the iPhone because an error occurred while reading from this device. What can I do?

I can't seem to sync my iPhone to my computer; I keep getting this message: "iTunes could not connect to the iPhone because an error occurred while reading from this device." I get the same message with my iPad, even though they all share the same account. What can I do?

This could be caused by a USB connection issue. Make sure the iPhone is directly connected to the Mac using the USB cable it came with. Also, try disconnecting all other USB devices.
If you haven't already try resetting the iPhone by holding the Home and Sleep/Wake buttons until you see an Apple logo as described here:http://docs.info.apple.com/article.html?artnum=305743

Error occured while reading identity data: failed to decrypt safe contents

Hello,
We are trying to access Tibco JMS server through SSL using JNDI lookup. Getting the following error, while executing a sample java file.
Java Version -
java version "1.4.2_05"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_05-b04)
Java HotSpot(TM) Client VM (build 1.4.2_05-b04, mixed mode)
Please let me know if any of you faced similar issues.
thanks in advace.
Following are the error messages.
javax.jms.JMSSecurityException: Error occured while reading identity data: failed to de
crypt safe contents entryCOM.rsa.jsafe.SunJSSE_cs: Could not perform unpadding: invalid
pad byte. at com.tibco.tibjms.TibjmsSSL._identityFromStore(TibjmsSSL.java:2699)
at com.tibco.tibjms.TibjmsSSL.createIdentity(TibjmsSSL.java:2604)
at com.tibco.tibjms.TibjmsxLinkSSL._initSSL(TibjmsxLinkSSL.java:291)
at com.tibco.tibjms.TibjmsxLinkSSL.connect(TibjmsxLinkSSL.java:338)
at com.tibco.tibjms.TibjmsConnection._create(TibjmsConnection.java:611)
at com.tibco.tibjms.TibjmsConnection.<init>(TibjmsConnection.java:1772)
at com.tibco.tibjms.TibjmsTopicConnection.<init>(TibjmsTopicConnection.java:37)
at com.tibco.tibjms.TibjmsxCFImpl._createImpl(TibjmsxCFImpl.java:139)
at com.tibco.tibjms.TibjmsxCFImpl._createConnection(TibjmsxCFImpl.java:201)
at com.tibco.tibjms.TibjmsTopicConnectionFactory.createTopicConnection(TibjmsTo
picConnectionFactory.java:84)
at tibjmsSSLJNDI.<init>(tibjmsSSLJNDI.java:202)
at tibjmsSSLJNDI.main(tibjmsSSLJNDI.java:252)
##### Linked Exception:
com.tibco.security.AXSecurityException: failed to decrypt safe contents entryCOM.rsa.js
afe.SunJSSE_cs: Could not perform unpadding: invalid pad byte.
at com.tibco.security.impl.j2se.IdentityImpl.init(IdentityImpl.java:70)
at com.tibco.security.IdentityFactory.createIdentity(IdentityFactory.java:61)
at com.tibco.tibjms.TibjmsSSL._identityFromStore(TibjmsSSL.java:2680)
at com.tibco.tibjms.TibjmsSSL.createIdentity(TibjmsSSL.java:2604)
at com.tibco.tibjms.TibjmsxLinkSSL._initSSL(TibjmsxLinkSSL.java:291)
at com.tibco.tibjms.TibjmsxLinkSSL.connect(TibjmsxLinkSSL.java:338)
at com.tibco.tibjms.TibjmsConnection._create(TibjmsConnection.java:611)
at com.tibco.tibjms.TibjmsConnection.<init>(TibjmsConnection.java:1772)
at com.tibco.tibjms.TibjmsTopicConnection.<init>(TibjmsTopicConnection.java:37)
at com.tibco.tibjms.TibjmsxCFImpl._createImpl(TibjmsxCFImpl.java:139)
at com.tibco.tibjms.TibjmsxCFImpl._createConnection(TibjmsxCFImpl.java:201)
at com.tibco.tibjms.TibjmsTopicConnectionFactory.createTopicConnection(TibjmsTo
picConnectionFactory.java:84)
at tibjmsSSLJNDI.<init>(tibjmsSSLJNDI.java:202)
at tibjmsSSLJNDI.main(tibjmsSSLJNDI.java:252)
Subexception stack trace follows:
java.io.IOException: failed to decrypt safe contents entryCOM.rsa.jsafe.SunJSSE_cs: Cou
ld not perform unpadding: invalid pad byte.
at com.sun.net.ssl.internal.ssl.PKCS12KeyStore.engineLoad(Unknown Source)
at java.security.KeyStore.load(Unknown Source) at com.tibco.security.impl.j2se.IdentityImpl.init(IdentityImpl.java:66)
at com.tibco.security.IdentityFactory.createIdentity(IdentityFactory.java:61)
at com.tibco.tibjms.TibjmsSSL._identityFromStore(TibjmsSSL.java:2680)
at com.tibco.tibjms.TibjmsSSL.createIdentity(TibjmsSSL.java:2604)
at com.tibco.tibjms.TibjmsxLinkSSL._initSSL(TibjmsxLinkSSL.java:291)
at com.tibco.tibjms.TibjmsxLinkSSL.connect(TibjmsxLinkSSL.java:338)
at com.tibco.tibjms.TibjmsConnection._create(TibjmsConnection.java:611)
at com.tibco.tibjms.TibjmsConnection.<init>(TibjmsConnection.java:1772)
at com.tibco.tibjms.TibjmsTopicConnection.<init>(TibjmsTopicConnection.java:37)
at com.tibco.tibjms.TibjmsxCFImpl._createImpl(TibjmsxCFImpl.java:139)
at com.tibco.tibjms.TibjmsxCFImpl._createConnection(TibjmsxCFImpl.java:201)
at com.tibco.tibjms.TibjmsTopicConnectionFactory.createTopicConnection(TibjmsTo
picConnectionFactory.java:84)
at tibjmsSSLJNDI.<init>(tibjmsSSLJNDI.java:202)
at tibjmsSSLJNDI.main(tibjmsSSLJNDI.java:252)
Caused by: COM.rsa.jsafe.SunJSSE_cs: Could not perform unpadding: invalid pad byte.
at COM.rsa.jsafe.SunJSSE_al.a(Unknown Source)
at COM.rsa.jsafe.SunJSSE_ag.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.PKCS12KeyStore.a(Unknown Source)
... 16 more
Subexception stack trace follows:
java.io.IOException: failed to decrypt safe contents entryCOM.rsa.jsafe.SunJSSE_cs: Cou
ld not perform unpadding: invalid pad byte.
at com.sun.net.ssl.internal.ssl.PKCS12KeyStore.engineLoad(Unknown Source)
at java.security.KeyStore.load(Unknown Source)
at com.tibco.security.impl.j2se.IdentityImpl.init(IdentityImpl.java:66)
at com.tibco.security.IdentityFactory.createIdentity(IdentityFactory.java:61)
at com.tibco.tibjms.TibjmsSSL._identityFromStore(TibjmsSSL.java:2680)
at com.tibco.tibjms.TibjmsSSL.createIdentity(TibjmsSSL.java:2604)
at com.tibco.tibjms.TibjmsxLinkSSL._initSSL(TibjmsxLinkSSL.java:291)
at com.tibco.tibjms.TibjmsxLinkSSL.connect(TibjmsxLinkSSL.java:338)
at com.tibco.tibjms.TibjmsConnection._create(TibjmsConnection.java:611)
at com.tibco.tibjms.TibjmsConnection.<init>(TibjmsConnection.java:1772)
at com.tibco.tibjms.TibjmsTopicConnection.<init>(TibjmsTopicConnection.java:37)
at com.tibco.tibjms.TibjmsxCFImpl._createImpl(TibjmsxCFImpl.java:139)
at com.tibco.tibjms.TibjmsxCFImpl._createConnection(TibjmsxCFImpl.java:201)
at com.tibco.tibjms.TibjmsTopicConnectionFactory.createTopicConnection(TibjmsTo
picConnectionFactory.java:84)
at tibjmsSSLJNDI.<init>(tibjmsSSLJNDI.java:202)
at tibjmsSSLJNDI.main(tibjmsSSLJNDI.java:252)
Caused by: COM.rsa.jsafe.SunJSSE_cs: Could not perform unpadding: invalid pad byte.
at COM.rsa.jsafe.SunJSSE_al.a(Unknown Source)
at COM.rsa.jsafe.SunJSSE_ag.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.PKCS12KeyStore.a(Unknown Source)
... 16 more

For the benifit of others.
The issue is resolved.
When we set the certificate password inside our application we were encrypting it inside our system.
When we sent it to tibco we did not decrypt it.
So the encrypted password was sent as it is that was the issue :(
Thanks,
Reflex.

Error occured while reading from the device

I need help!!! whenever i try to update my iphone to the new 1.1.1 version, i get an error message saying "error occured while reading from the device" the same message comes up when i try to restore it. i havent mod'd my phone in any way. does anyone know whats wrong or how to fix it?

I have the same problem. Was a solution ever given ?

Raw Read Error Rate, Errors occurred while reading raw data from a disk

Similar Messages

Maybe you are looking for