RAW support for Fuji X-T1 and LR4?

Or do I have to upgrade to LR5??

The Fuji XT-1 was first supported in Lightroom 5.4
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
Either upgrade to 5.4 or download the free Adobe DNG converter, convert all XT-1 Rawfiles to DNGs then edit the DNGs in Lightroom 4
http://www.adobe.com/products/photoshop/extend.displayTab2.html

Similar Messages

  • Is there Camera RAW support for Lightroom 4.4 and Canon 7D Mark ii?

    I need Camera RAW support for Lightroom 4.4 and Canon 7D Mark ii.  Is there a Camera RAW version for me? 

    Thanks for your help.  I checked out DNG on YouTube and understand more
    about it.  I downloaded the DNG converter and transferred in files from my
    camera.  Then I imported into Lightroom.  It works!   Thanks again.
    On Wed, Nov 19, 2014 at 5:56 PM, Jeff Schewe <[email protected]>

  • Why no RAW support for Fuji X10?

    The Fuji X10 has been on the market for almost a year now and there still is no RAW support for it in Aperture. Why?

    Only Apple can asnwer the "Why?" questions, I'm afriad.
    Aperture menu -> Provide Aperture Feedback and let them know you want it.

  • New RAW support for Fuji X10 camera

    I really appreciate all the work that must be done at Adobe in order to keep up with new cameras and their un-ending parade of new RAW file formats. Case in point, the new Fuji X10. RAW support was added for this model in the most recent Lightroom/Photoshop update and I was very glad for that since I acquired a new X10 just a couple of weeks ago. However, I am not able to get a handle on the noise reduction and sharpening aspects of the RAW files from the X10. Is it possible that since Fuji uses a non-typical array on their EXR sensor inside the camera that the usual sharpening and noise reduction controls are not adequate? They produce some very strange and inpleasant results. It's really puzzling since I have been a ACR user for many years with other camera makes and models and have always been able to optimize the RAW files in such a way as to better the camera's JPEG output. Not so with the X10. I should note that all the other adjustable parameters seem to work as would be expected when processing RAW files from the X10. It's just the Noise and Sharpaning parameters which do not seem to work very well. At least not as well as the camera's own internal noise and sharpening processing does. Suggestions? Maybe I'm misssing something, but I think I have tried every combination of adjustment possible from within Lightroom to try and improve the noise and sharpening from X10 files, but with very little success. It actually seems to work better to re-process out of camera JPEGs or "in camera processed" RAW files. At least the results from these files act more like one would expect, but this does give up much of the flexibility of working directly on a RAW file especially in areas such as recovering highlight detail, etc.
    Hope someone can provide some answers!
    Tom

    Exactly my experience, plus blue/cyan difficult to get right, on 2 (Apple) computers/monitors...OOC jpegs are good, more easily processed, what gives?

  • When will camera raw support for Fuji Xpro 1 will be available?

    Today Apple has just updated camera raw for new camera models but I can't find update for Xpro 1 ? Why does it take so long to have such update? Appple please makes update for Fuji Xpro 1. Thank you.

    You're not addressing Apple here, and no one knows any more than you do about what Apple will do.

  • Why no raw support for Fuji XF-1?

    The XF-1 has the same sensor as the X10 so it should be easy enough to add to RAW support I think.

    Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
    Feedback

  • Raw support for EM-5, D800e, and others

    Full list of cameras supported by Digital Camera RAW Compatibility Update 3.13: link
    —Andreas

    Well done code cutters at Aperture.  At first glance the Digital Camera RAW Compatibility Update 3.13 seems to have fixed the problem.  The quickness of your action is appreciated!

  • Raw Support for Panasonic LX-5

    In trying to keep aware of when raw support might be added for my 2 month old LX-5 I came across an update that someone had referenced from January of this year that added raw support for the LX-5 and some other cameras, when I tried to download it my computer said the latest update on my computer was newer than that. Does that mean I should already have it? If not does anyone know when it will be added? When I first took pictures with my camera I had images saved in raw and j-peg and i photo only recognized the j peg formatted pictures. The j pegs are beautiful but I would like to experiment with raw.

    I reply now only to validate my ignorance..
    I think what happened is the update that added the lx-5 raw support came out a couple weeks after I got the camera, so I tried it initially and was not able to import raw files and gave up and went to j peg. I tried again this morning after posting, and have been happily dealing with raw files all morning.
    Love the camera and am glad i photo will allow me to realize all that it can do!

  • Proper support for Fuji EXR Raw Files

    There is still no proper support for Fuji  EXR Raw files.  On any Fuji X-series camera, the in-camera raw processing, including specifying options always outputs a far superior image that Adobe Camera Raw 6.  I've been using an X100 for some time now, and have really gathered some great images with it. But Adobe Camera Raw fails miserably to understand how to process these files.
    This is more of a complaint and feature request than a question, because I already know the answer. Adobe has not worked close enough, or at all, with Fuji to develop a Raw processor for the EXR pixel layout.
    The EXR pixel arrangement offers new possibilities, especially the ability to take an HDR image of a moving subject, and without a tripod. The elimination of the low-pass filter allows for more sharpness, and finally the noise pattern is much more "film-like".
    I've been using Adobe Photoshop for processing images for years, but have no compelling reason to upgrade without a proper conversion for Fuji RAW files.
    Adobe: Please work with Fuji to bring world-class support for EXR Raw images.
    Thank you,
    William

    Good day!
    Adobe has not worked close enough, or at all, with Fuji to develop a Raw processor for the EXR pixel layout.
    There seems to be a reason why Adobe has to reverse engineer RAW formats – the camera manufacturers don’t want their customers to use Adobe (and other) software to process their RAW files. (If their proprietary software gets better results then that’s understandable, but for how long are they going to support their own software?)
    Now maybe Fuji is more cooperative than others, but do you know that for certain?
    I've been using Adobe Photoshop for processing images for years, but have no compelling reason to upgrade without a proper conversion for Fuji RAW files.
    If the new/improved features of Photoshop CS6 have no significance for the way you process, manage, edit and touch-up photographs feel free to stick with whatever version of Photoshop you use currently, but be aware that hardware/OS changes on your side may some day make that version inoperable on your set-up.
    Also the upgrade path has been cut down to one version, if I understand correctly.
    Anyway, this is a beginners Forum, feature requests might be better posted over at
    http://feedback.photoshop.com/photoshop_family
    Regards,
    Pfaffenbichler

  • HT201071 When will RAW support for Pentax K3 be available for OSX and Aperture 3, finally? Really very much waiting for it!!!

    When will RAW support for Pentax K3 be available for OSX and Aperture 3, finally? Really very much waiting for it!!!

    We're all other users here, so can't answer that question. You can request it by submitting feedback here:
    http://www.apple.com/feedback/

  • RAW Support for Sigma Merrill and Sony RX-1

    When does Adobe expect to be able to provide RAW support for the Sigma X3F files produced by the DPxMs and the SD-1/SD-1M?  I am also interested in RAW support for the soon to be released Sony RX-1 Cybershot FF camera.  Thank you for the time and response.

    Thanks for the information.  As you can probably tell I haven't posted here before.  It's where Adobe's FAQ section sent me to "Ask a Question."  Therefore, I thought it was the place Adobe looked to for feedback on what customers wanted.  I'm not sure why future camera support should be such a secret.  In the case of the RX-1, I suspect they will have it fairly quickly as there will be many phtographer's asking for it.  In the case of the Sigma's, I suspect that since the cameras have been out for a while now that they are waiting to see how much demand there is for support.  The DPxMs are receiving very good reviews for their image quality and it is well deserved in my opinion.  I haven't seen the output from any camera that can match it for detail below the Nikon d800 or the Canon 5D MK III and even then it is very close at ISO 100-200.  I was surprised at how good 800 ISO can look with these cameras when the tif file is processed in LR 4.2.  A comparison of the .jpg processed for best image and the .tif processed for best image in LR 4.2 both at 50%.  The .tif cleans up very nicely while preserving significant detail.

  • TS2518 RAW-converter for Fuji X-T1 ?

    Wenn can we expect the right RAW-converter for the new Fuji X-T1 for Aperture?

    sorry, no. Fujifilm X-T1 is not yet on the list of supported cameras, see:
    Apple - Aperture - Technical Specifications - RAW Support
    Only Apple could tell you, if or when raw support for the camera will be released, and they do not announce this information in advance.  We are are only users here like yourself, so we cannot tell you.
    -- Léonie

  • Camera Raw Support for Canon 7D MkII

    Just trying to get some idea if I should spend the $99.00 to buy Aperture from the Apple Store.  This might sound a little over the top, but the work flow I miss by not having RAW support in Lightroom is worth the expense of buying Aperture.
    I do find it very disappointing that Adobe have not as yet provided support for the new Canon 7D MkII.  This will be a VERY popular camera.
    More importantly I find this tardiness on Adobe's part very disappointing because they market CC buy saying "You will always have up to date software".  When you consider Apple and Google Picasa have both already supported the Canon 7D MkII.  I might add they both had support for the camera within days of it's release on 31 of Oct.
    So after my little rant.
    Can anybody from Adobe advise when we will see Camera Raw support the new Canon 7DMkII?
    Even if it is in Beta form I would be very happy to be a Beta tester.  I have very extensive experience in testing software and would be prepared to do structured Beta testing.  I would be very happy if someone from Adobe Labs would contact me for the purpose of Beta testing Camera Raw support for the 7D MkII.
    Kind Regards
    Tom Croll

    Thanks ssprengel, you have clearly put into words what is currently reality at Adobe, and confirmed my suspicion of Aperture being a dead product.  Although Google's Picasa is not dead.
    I do realize Adobe Products are very well developed and software does take time to perfect before it gets released.  I have been in the software development game for 35 years
    But Camera RAW is an adjunct to Lightroom, Photoshop, Premier Pro etc.  As such the support for new camera models should be a relatively simple exercise and should not be held up by other R&D on the products that Camera Raw plugs into.  I believe they have in the past released updates to Camera Raw that essentially was just for new camera models.  I do realize I could be wrong on this point, but I fail to see why they can't achieve this outcome.
    Also, as I said Adobe Market Creative Cloud membership saying you will always be up to date. Or words to that effect.
    To have an Adobe support person get upset because he has a large number of people pestering Adobe, and not him personally, trying to get ans answer as to the timing of the release of support for a new camera model, quite frankly is totally unacceptable.  Not acceptable to the customers and not acceptable to the poor support person who has to handle disgruntled customers due to poor planning on Adobe's part.
    In my original post I made a very serious offer to do Beta Testing on support for the Canon 7DMkII Raw files.  But when i last checked with Adobe Labs the current Beta does not include support for this camera.
    There maybe extenuating circumstances around the timely supply of this support.  Like when did Canon provide the Specs for the 7D MkII and are those specs so different from other currently supported models.   Even some feedback as to what the problem is, would help us understand.
    I hope I have expressed my thoughts objectively and hope this discussion stream will get to management at Adobe.  In fact I am very inclined to ensure it does get to senior management.  I don't want to start writing a personal letter to the Chairman of Adobe's Board, but sometimes things do need a shake up.
    Kind Regards
    Tom Croll

  • RAW support for Olympus E-5

    I upgraded my E-510 to an E-5 last month (the E-5 was only released in November) and discovered that I can't process my RAW files in CS5.  Does anyone know when, or how long it will be before, RAW support for the camera will be available?
    Yes, I know I can use the Olymus software to process the files, but I prefer PhotoShop.

    You might get an answer in the Camera Raw forum.

  • [Consolidation-Locked] Please add RAW support for the Nikon D600 to Lightroom as soon as possible!

    My Fair Adobe,
    Please add RAW support for the Nikon D600 to Lightroom as soon as possible!
    ViewNX lets me get to the images, but come on!!! I know Lightroom, and you, ViewNX, are no Lightroom.
    Yes, I see everyone else ASKING for D600 support. I'm here to beg for it! Don't make me wait much longer!
    Message title was edited by: Brett N
    Message title was edited by: Brett N

    Rob, my reading of your site is that this plug-in copies settings from raw to jpeg, does it work the other way around as well?
    Rob Cole wrote:
    One of the great things about the new 0-based defaults and linear tone curve is:
    You can develop the jpegs now, in Lightroom, and then sync the settings to the raws later (e.g. using RawPlusJpeg), and provided you select a matching camera profile, they will look almost the same (white balance won't translate over, but everything else will, more or less). Beware lens corrections applied to the raws might alter the registration of precision local adjustments.
    Note: I recommend shooting with ADL off in order for this to work better, and consider turning sharpening off in camera as well, and noise reduction and everything else to whatever extent is possible.
    Rob

Maybe you are looking for