Razerd doesn't work when started at boot.
Hey, as the title says the razerd service does not work when I start it at boot. (using systemctl enable razerd)
I'm currently using the git version from the aur to see if it would fix anything, though I was using the standard package before.
What happens is that if I have razerd enabled, my mouse will not move at all. The only fix to this i've found is:
pkill razerd
unplug the mouse, replug
systemctl start razerd (or sudo razerd)
If I boot the system without the service enabled and start it post boot it works fine. Help?
Mouse is a Razer Deathadder 3.5. Worth noting that it was working perfectly a couple days ago.
Heres an xorg.0.log of a recent boot:
[ 15.806]
X.Org X Server 1.17.1
Release Date: 2015-02-10
[ 15.806] X Protocol Version 11, Revision 0
[ 15.806] Build Operating System: Linux 3.18.6-1-ARCH x86_64
[ 15.806] Current Operating System: Linux qhost 3.19.2-1-ARCH #1 SMP PREEMPT Wed Mar 18 16:21:02 CET 2015 x86_64
[ 15.806] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=db8748e8-ddcb-48c6-ac0c-e8560a1c3848 rw quiet
[ 15.806] Build Date: 14 March 2015 06:45:50PM
[ 15.806]
[ 15.806] Current version of pixman: 0.32.6
[ 15.807] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 15.807] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 15.807] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Apr 2 20:30:04 2015
[ 15.871] (==) Using config file: "/etc/X11/xorg.conf"
[ 15.872] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 15.872] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 16.049] (==) ServerLayout "Layout0"
[ 16.049] (**) |-->Screen "Screen0" (0)
[ 16.049] (**) | |-->Monitor "Monitor0"
[ 16.050] (**) | |-->Device "Device0"
[ 16.050] (**) |-->Input Device "Keyboard0"
[ 16.050] (**) |-->Input Device "Mouse0"
[ 16.050] (==) Automatically adding devices
[ 16.050] (==) Automatically enabling devices
[ 16.050] (==) Automatically adding GPU devices
[ 16.084] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
[ 16.084] Entry deleted from font path.
[ 16.084] (Run 'mkfontdir' on "/usr/share/fonts/OTF/").
[ 16.084] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 16.084] Entry deleted from font path.
[ 16.084] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 16.084] Entry deleted from font path.
[ 16.084] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 16.085] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 16.085] Entry deleted from font path.
[ 16.085] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 16.085] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 16.085] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 16.085] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 16.085] (WW) Disabling Keyboard0
[ 16.085] (WW) Disabling Mouse0
[ 16.085] (II) Loader magic: 0x815d80
[ 16.085] (II) Module ABI versions:
[ 16.085] X.Org ANSI C Emulation: 0.4
[ 16.085] X.Org Video Driver: 19.0
[ 16.085] X.Org XInput driver : 21.0
[ 16.085] X.Org Server Extension : 9.0
[ 16.086] (EE) systemd-logind: failed to get session: PID 333 does not belong to any known session
[ 16.086] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 16.088] (--) PCI:*(0:1:0:0) 10de:1187:3842:2765 rev 161, Mem @ 0xf6000000/16777216, 0xe8000000/134217728, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 16.088] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 16.088] (II) LoadModule: "glx"
[ 16.097] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 17.059] (II) Module glx: vendor="NVIDIA Corporation"
[ 17.059] compiled for 4.0.2, module version = 1.0.0
[ 17.059] Module class: X.Org Server Extension
[ 17.067] (II) NVIDIA GLX Module 346.47 Thu Feb 19 18:09:07 PST 2015
[ 17.089] (II) LoadModule: "nvidia"
[ 17.130] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 17.222] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 17.222] compiled for 4.0.2, module version = 1.0.0
[ 17.222] Module class: X.Org Video Driver
[ 17.232] (II) NVIDIA dlloader X Driver 346.47 Thu Feb 19 17:47:18 PST 2015
[ 17.232] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 17.233] (++) using VT number 7
[ 17.321] (II) Loading sub module "fb"
[ 17.321] (II) LoadModule: "fb"
[ 17.321] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 17.347] (II) Module fb: vendor="X.Org Foundation"
[ 17.347] compiled for 1.17.1, module version = 1.0.0
[ 17.347] ABI class: X.Org ANSI C Emulation, version 0.4
[ 17.347] (II) Loading sub module "wfb"
[ 17.347] (II) LoadModule: "wfb"
[ 17.347] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 17.364] (II) Module wfb: vendor="X.Org Foundation"
[ 17.364] compiled for 1.17.1, module version = 1.0.0
[ 17.364] ABI class: X.Org ANSI C Emulation, version 0.4
[ 17.364] (II) Loading sub module "ramdac"
[ 17.364] (II) LoadModule: "ramdac"
[ 17.364] (II) Module "ramdac" already built-in
[ 17.366] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 17.366] (==) NVIDIA(0): RGB weight 888
[ 17.366] (==) NVIDIA(0): Default visual is TrueColor
[ 17.366] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 17.368] (**) NVIDIA(0): Option "MetaModes" "nvidia-auto-select +0+0 { ForceFullCompositionPipeline = On }"
[ 17.368] (**) NVIDIA(0): Enabling 2D acceleration
[ 18.022] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
[ 18.024] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 760 (GK104) at PCI:1:0:0 (GPU-0)
[ 18.024] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 18.024] (--) NVIDIA(0): VideoBIOS: 80.04.c4.00.60
[ 18.024] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 18.033] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 760 at PCI:1:0:0
[ 18.033] (--) NVIDIA(0): CRT-0
[ 18.033] (--) NVIDIA(0): DFP-0
[ 18.033] (--) NVIDIA(0): Samsung S27B370 (DFP-1) (boot, connected)
[ 18.033] (--) NVIDIA(0): DFP-2
[ 18.033] (--) NVIDIA(0): DFP-3
[ 18.033] (--) NVIDIA(0): DFP-4
[ 18.033] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 18.033] (--) NVIDIA(0): DFP-0: Internal TMDS
[ 18.033] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[ 18.033] (--) NVIDIA(0): Samsung S27B370 (DFP-1): Internal TMDS
[ 18.033] (--) NVIDIA(GPU-0): Samsung S27B370 (DFP-1): 340.0 MHz maximum pixel clock
[ 18.033] (--) NVIDIA(0): DFP-2: Internal TMDS
[ 18.033] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[ 18.033] (--) NVIDIA(0): DFP-3: Internal TMDS
[ 18.033] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[ 18.033] (--) NVIDIA(0): DFP-4: Internal DisplayPort
[ 18.033] (--) NVIDIA(GPU-0): DFP-4: 960.0 MHz maximum pixel clock
[ 18.033] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 18.033] (**) NVIDIA(0): device Samsung S27B370 (DFP-1) (Using EDID frequencies has
[ 18.033] (**) NVIDIA(0): been enabled on all display devices.)
[ 18.035] (II) NVIDIA(0): Validated MetaModes:
[ 18.036] (II) NVIDIA(0): "nvidia-auto-select+0+0{ForceFullCompositionPipeline=On}"
[ 18.036] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[ 18.103] (--) NVIDIA(0): DPI set to (81, 80); computed from "UseEdidDpi" X config
[ 18.103] (--) NVIDIA(0): option
[ 18.103] (--) Depth 24 pixmap format is 32 bpp
[ 18.103] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 18.103] (II) NVIDIA: access.
[ 18.106] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 18.106] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 18.106] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 18.106] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 18.106] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 18.106] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 18.106] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 18.106] (II) NVIDIA(0): Config Options in the README.
[ 18.115] (II) NVIDIA(0): Setting mode "nvidia-auto-select+0+0{ForceFullCompositionPipeline=On}"
[ 18.327] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 18.327] (==) NVIDIA(0): Backing store enabled
[ 18.327] (==) NVIDIA(0): Silken mouse enabled
[ 18.328] (**) NVIDIA(0): DPMS enabled
[ 18.328] (II) Loading sub module "dri2"
[ 18.328] (II) LoadModule: "dri2"
[ 18.328] (II) Module "dri2" already built-in
[ 18.328] (II) NVIDIA(0): [DRI2] Setup complete
[ 18.328] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 18.328] (--) RandR disabled
[ 18.334] (II) Initializing extension GLX
[ 18.334] (II) Indirect GLX disabled.(II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 18.892] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 18.892] (II) LoadModule: "evdev"
[ 18.893] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 18.935] (II) Module evdev: vendor="X.Org Foundation"
[ 18.935] compiled for 1.17.1, module version = 2.9.2
[ 18.935] Module class: X.Org XInput Driver
[ 18.935] ABI class: X.Org XInput driver, version 21.0
[ 18.935] (II) Using input driver 'evdev' for 'Power Button'
[ 18.935] (**) Power Button: always reports core events
[ 18.935] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 18.935] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 18.935] (--) evdev: Power Button: Found keys
[ 18.935] (II) evdev: Power Button: Configuring as keyboard
[ 18.935] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event4"
[ 18.935] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 18.935] (**) Option "xkb_rules" "evdev"
[ 18.935] (**) Option "xkb_model" "pc104"
[ 18.935] (**) Option "xkb_layout" "us"
[ 18.961] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 18.961] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 18.961] (II) Using input driver 'evdev' for 'Power Button'
[ 18.961] (**) Power Button: always reports core events
[ 18.961] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 18.961] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 18.961] (--) evdev: Power Button: Found keys
[ 18.961] (II) evdev: Power Button: Configuring as keyboard
[ 18.961] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5/event3"
[ 18.961] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 18.961] (**) Option "xkb_rules" "evdev"
[ 18.961] (**) Option "xkb_model" "pc104"
[ 18.961] (**) Option "xkb_layout" "us"
[ 18.961] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event13)
[ 18.961] (II) No input driver specified, ignoring this device.
[ 18.961] (II) This device may have been added with another device file.
[ 18.962] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event14)
[ 18.962] (II) No input driver specified, ignoring this device.
[ 18.962] (II) This device may have been added with another device file.
[ 18.962] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event15)
[ 18.962] (II) No input driver specified, ignoring this device.
[ 18.962] (II) This device may have been added with another device file.
[ 18.962] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event16)
[ 18.962] (II) No input driver specified, ignoring this device.
[ 18.962] (II) This device may have been added with another device file.
[ 18.962] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event0)
[ 18.962] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 18.962] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[ 18.962] (**) Logitech USB Keyboard: always reports core events
[ 18.962] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event0"
[ 18.962] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31d
[ 18.962] (--) evdev: Logitech USB Keyboard: Found keys
[ 18.962] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[ 18.963] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0/0003:046D:C31D.0001/input/input2/event0"
[ 18.963] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 8)
[ 18.963] (**) Option "xkb_rules" "evdev"
[ 18.963] (**) Option "xkb_model" "pc104"
[ 18.963] (**) Option "xkb_layout" "us"
[ 18.963] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event1)
[ 18.963] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 18.963] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[ 18.963] (**) Logitech USB Keyboard: always reports core events
[ 18.963] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event1"
[ 18.963] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31d
[ 18.963] (--) evdev: Logitech USB Keyboard: Found absolute axes
[ 18.963] (II) evdev: Logitech USB Keyboard: Forcing absolute x/y axes to exist.
[ 18.963] (--) evdev: Logitech USB Keyboard: Found keys
[ 18.963] (II) evdev: Logitech USB Keyboard: Forcing relative x/y axes to exist.
[ 18.963] (II) evdev: Logitech USB Keyboard: Configuring as mouse
[ 18.963] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[ 18.963] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.1/0003:046D:C31D.0002/input/input3/event1"
[ 18.963] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 9)
[ 18.963] (**) Option "xkb_rules" "evdev"
[ 18.963] (**) Option "xkb_model" "pc104"
[ 18.963] (**) Option "xkb_layout" "us"
[ 18.964] (II) evdev: Logitech USB Keyboard: initialized for absolute axes.
[ 18.964] (**) Logitech USB Keyboard: (accel) keeping acceleration scheme 1
[ 18.964] (**) Logitech USB Keyboard: (accel) acceleration profile 0
[ 18.964] (**) Logitech USB Keyboard: (accel) acceleration factor: 2.000
[ 18.964] (**) Logitech USB Keyboard: (accel) acceleration threshold: 4
[ 18.964] (II) config/udev: Adding input device Razer Razer DeathAdder (/dev/input/event2)
[ 18.964] (**) Razer Razer DeathAdder: Applying InputClass "evdev pointer catchall"
[ 18.964] (**) Razer Razer DeathAdder: Applying InputClass "My Mouse"
[ 18.964] (II) Using input driver 'evdev' for 'Razer Razer DeathAdder'
[ 18.964] (**) Razer Razer DeathAdder: always reports core events
[ 18.964] (**) evdev: Razer Razer DeathAdder: Device: "/dev/input/event2"
[ 19.016] (--) evdev: Razer Razer DeathAdder: Vendor 0x1532 Product 0x16
[ 19.016] (--) evdev: Razer Razer DeathAdder: Found 12 mouse buttons
[ 19.016] (--) evdev: Razer Razer DeathAdder: Found scroll wheel(s)
[ 19.016] (--) evdev: Razer Razer DeathAdder: Found relative axes
[ 19.016] (--) evdev: Razer Razer DeathAdder: Found x and y relative axes
[ 19.016] (II) evdev: Razer Razer DeathAdder: Configuring as mouse
[ 19.016] (II) evdev: Razer Razer DeathAdder: Adding scrollwheel support
[ 19.016] (**) evdev: Razer Razer DeathAdder: YAxisMapping: buttons 4 and 5
[ 19.016] (**) evdev: Razer Razer DeathAdder: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 19.016] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4:1.0/0003:1532:0016.0006/input/input22/event2"
[ 19.016] (II) XINPUT: Adding extended input device "Razer Razer DeathAdder" (type: MOUSE, id 10)
[ 19.016] (II) evdev: Razer Razer DeathAdder: initialized for relative axes.
[ 19.017] (**) Option "AccelerationScheme" "none"
[ 19.017] (**) Razer Razer DeathAdder: (accel) selected scheme none/0
[ 19.017] (**) Razer Razer DeathAdder: (accel) acceleration factor: 2.000
[ 19.017] (**) Razer Razer DeathAdder: (accel) acceleration threshold: 4
[ 19.017] (II) config/udev: Adding input device Razer Razer DeathAdder (/dev/input/mouse0)
[ 19.017] (**) Razer Razer DeathAdder: Applying InputClass "My Mouse"
[ 19.017] (II) No input driver specified, ignoring this device.
[ 19.017] (II) This device may have been added with another device file.
[ 19.017] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event7)
[ 19.017] (II) No input driver specified, ignoring this device.
[ 19.017] (II) This device may have been added with another device file.
[ 19.018] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event8)
[ 19.018] (II) No input driver specified, ignoring this device.
[ 19.018] (II) This device may have been added with another device file.
[ 19.018] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event9)
[ 19.018] (II) No input driver specified, ignoring this device.
[ 19.018] (II) This device may have been added with another device file.
[ 19.018] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event10)
[ 19.018] (II) No input driver specified, ignoring this device.
[ 19.018] (II) This device may have been added with another device file.
[ 19.018] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event11)
[ 19.018] (II) No input driver specified, ignoring this device.
[ 19.018] (II) This device may have been added with another device file.
[ 19.019] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event12)
[ 19.019] (II) No input driver specified, ignoring this device.
[ 19.019] (II) This device may have been added with another device file.
[ 19.019] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event6)
[ 19.019] (II) No input driver specified, ignoring this device.
[ 19.019] (II) This device may have been added with another device file.
[ 19.019] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 19.019] (II) No input driver specified, ignoring this device.
[ 19.019] (II) This device may have been added with another device file.
[ 213.516] (II) config/udev: removing device Razer Razer DeathAdder
[ 213.556] (II) evdev: Razer Razer DeathAdder: Close
[ 213.556] (II) UnloadModule: "evdev"
[ 328.612] (II) config/udev: Adding input device Razer Razer DeathAdder (/dev/input/mouse0)
[ 328.612] (**) Razer Razer DeathAdder: Applying InputClass "My Mouse"
[ 328.612] (II) No input driver specified, ignoring this device.
[ 328.612] (II) This device may have been added with another device file.
[ 328.612] (II) config/udev: Adding input device Razer Razer DeathAdder (/dev/input/event2)
[ 328.612] (**) Razer Razer DeathAdder: Applying InputClass "evdev pointer catchall"
[ 328.612] (**) Razer Razer DeathAdder: Applying InputClass "My Mouse"
[ 328.612] (II) Using input driver 'evdev' for 'Razer Razer DeathAdder'
[ 328.612] (**) Razer Razer DeathAdder: always reports core events
[ 328.612] (**) evdev: Razer Razer DeathAdder: Device: "/dev/input/event2"
[ 328.663] (--) evdev: Razer Razer DeathAdder: Vendor 0x1532 Product 0x16
[ 328.663] (--) evdev: Razer Razer DeathAdder: Found 12 mouse buttons
[ 328.663] (--) evdev: Razer Razer DeathAdder: Found scroll wheel(s)
[ 328.663] (--) evdev: Razer Razer DeathAdder: Found relative axes
[ 328.663] (--) evdev: Razer Razer DeathAdder: Found x and y relative axes
[ 328.663] (II) evdev: Razer Razer DeathAdder: Configuring as mouse
[ 328.663] (II) evdev: Razer Razer DeathAdder: Adding scrollwheel support
[ 328.663] (**) evdev: Razer Razer DeathAdder: YAxisMapping: buttons 4 and 5
[ 328.663] (**) evdev: Razer Razer DeathAdder: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 328.663] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4:1.0/0003:1532:0016.000A/input/input26/event2"
[ 328.663] (II) XINPUT: Adding extended input device "Razer Razer DeathAdder" (type: MOUSE, id 10)
[ 328.663] (II) evdev: Razer Razer DeathAdder: initialized for relative axes.
[ 328.663] (**) Option "AccelerationScheme" "none"
[ 328.663] (**) Razer Razer DeathAdder: (accel) selected scheme none/0
[ 328.663] (**) Razer Razer DeathAdder: (accel) acceleration factor: 2.000
[ 328.663] (**) Razer Razer DeathAdder: (accel) acceleration threshold: 4
[ 425.481] (II) config/udev: removing device Razer Razer DeathAdder
[ 425.513] (II) evdev: Razer Razer DeathAdder: Close
[ 425.513] (II) UnloadModule: "evdev"
[ 425.536] (II) config/udev: Adding input device Razer Razer DeathAdder (/dev/input/mouse0)
[ 425.536] (**) Razer Razer DeathAdder: Applying InputClass "My Mouse"
[ 425.536] (II) No input driver specified, ignoring this device.
[ 425.536] (II) This device may have been added with another device file.
[ 425.536] (II) config/udev: Adding input device Razer Razer DeathAdder (/dev/input/event2)
[ 425.536] (**) Razer Razer DeathAdder: Applying InputClass "evdev pointer catchall"
[ 425.536] (**) Razer Razer DeathAdder: Applying InputClass "My Mouse"
[ 425.536] (II) Using input driver 'evdev' for 'Razer Razer DeathAdder'
[ 425.536] (**) Razer Razer DeathAdder: always reports core events
[ 425.536] (**) evdev: Razer Razer DeathAdder: Device: "/dev/input/event2"
[ 425.590] (--) evdev: Razer Razer DeathAdder: Vendor 0x1532 Product 0x16
[ 425.590] (--) evdev: Razer Razer DeathAdder: Found 12 mouse buttons
[ 425.590] (--) evdev: Razer Razer DeathAdder: Found scroll wheel(s)
[ 425.590] (--) evdev: Razer Razer DeathAdder: Found relative axes
[ 425.590] (--) evdev: Razer Razer DeathAdder: Found x and y relative axes
[ 425.590] (II) evdev: Razer Razer DeathAdder: Configuring as mouse
[ 425.590] (II) evdev: Razer Razer DeathAdder: Adding scrollwheel support
[ 425.590] (**) evdev: Razer Razer DeathAdder: YAxisMapping: buttons 4 and 5
[ 425.590] (**) evdev: Razer Razer DeathAdder: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 425.590] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4:1.0/0003:1532:0016.000B/input/input27/event2"
[ 425.590] (II) XINPUT: Adding extended input device "Razer Razer DeathAdder" (type: MOUSE, id 10)
[ 425.590] (II) evdev: Razer Razer DeathAdder: initialized for relative axes.
[ 425.590] (**) Option "AccelerationScheme" "none"
[ 425.590] (**) Razer Razer DeathAdder: (accel) selected scheme none/0
[ 425.590] (**) Razer Razer DeathAdder: (accel) acceleration factor: 2.000
[ 425.590] (**) Razer Razer DeathAdder: (accel) acceleration threshold: 4
Any help is extremely appreciated.
Last edited by Toqoz (2015-04-02 05:39:20)
Heres what happens when I try to start the service after having it at startup. (when I dont unplug the mouse inbetween)
[toqoz@qhost ~]$ sudo pkill razerd
[sudo] password for toqoz:
[toqoz@qhost ~]$ sudo razerd
Razer device service daemon
librazer: Failed to claim USB interface
librazer: hw_deathadder: Failed to claim device
Last edited by Toqoz (2015-04-02 23:21:57)
Similar Messages
-
Default Gateway doesn't work when entered in address bar
I'm trying to get to my router's settings. The default IP address of my router (192.168.1.1) doesn't work when I enter it in the address bar. Neither does the Default Gateway that I got from clicking on start, run, typing cmd and then ipconfig/all. Does anybody know how I can access my router settings without resetting it?
That seems to be the modem default gateway... is your PC connected to the modem via a USB cable? (sometimes that might be the case)... or what port of the router is your modem connected to?
-
Captivate 8: audio file doesn't work when I add it to an object slide
Hi everyone,
I have problems with the audio in Captivate 8. This doesn't work when I press an object slide (button) that has an audio file incorporated. This issue doesn't happen when I add sound to an individual slide.
I have tried to fix the problem by changing the preferences, but nothing
Any suggestion is welcomed!!
EvelynAn audio file that is attached to an object or a slide, will play when that object or slide become visible. I don't know what you mean by 'has an audio file incorporated'? Do you mean that it is attached to the button in its audio part of the Properties, which is in the Options tab? In that case the audio will just play when that button gets visible, if it is at the start of a slide, audio will play at the start of that slide.
If you want an audio clip to play only when a button is clicked, you need to use an action 'Play audio', or make an audio object visible.
Audio Objects: Control them! - Captivate blog
Beware: if you do this with a simple action triggered by the button, the playhead will be released if that button has a pausing point. -
my speaker doesn't work when I try to listen to music or open up a quick time file, however they seem to work perfectly when I listen to a voice memo (p.s. the volume slider disappears in a song page and even in the multi tasking bar)
Thanks for your solution, it wasn't quite what solved the problem but i remembered that i had a bit of salt water on my phone recently and spraying the charging port with an anti-oxide spray solved my problem, do you mind if i ask, how is the charging port related with the volume or/and speakers?
-
BitmapData draw method doesn't work when the project is published as the .swf file of the web applic
Hi,
I am totally confused by this strange error. When I tried using the draw method of BitmapData to draw a movieclip symbol of my project, it seems to work fine locally. However, as I uploaded the published .swf file to my web server and launched it as the plugin of my web application, it failed. The source codes as follows,
function printscreenClicked():void
//ExternalInterface.call calls a javascript function to print message1
var bd:BitmapData = new BitmapData(stage.width,stage.height);
//ExternalInterface.call calls a javascript function to print message2
bd.draw(stage);
//ExternalInterface.call calls a javascript function to print message3
message3 didn't show at all. Instead, the browser console shows "Uncaught Error: Error calling method on NPObject.". My understanding of this error message is that the .swf is calling something crashing, and I believe that bd.draw(stage)is the crashng method call.
Also, here is my html embed tag:
<embed src="/tests/videoplayer.swf" id="flash" quality="high" height="510" width="990" scale="exactfit" name="squambido" align="middle" allowscriptaccess="always" allowfullscreen="true" type="application/x-shockwave-flash" pluginspage="http://www.macromedia.com/go/getflashplayer" style="margin: 0px auto;clear:both;position:relative;"/>
Can someone help me?Thank you for your reply.
I tried stageWidth and stageHeight, but it still doesn't work.
The draw() methid is triggered when I clicked a screenshot button in my application as follows,
ExternalInterface.addCallback("printscreenClicked", printscreenClicked);
function printscreenClicked():void
//ExternalInterface.call calls a javascript function to print message1
var bd:BitmapData = new BitmapData(stage.width,stage.height);
//ExternalInterface.call calls a javascript function to print message2
bd.draw(stage);
//ExternalInterface.call calls a javascript function to print message3
Would you please give me an example of "waiting for Event.RESIZE is good, or just at least Event.ENTER_FRAME"?
My real purpose in this application is to capture a snapshot of a streaming video. The video is contained in a movieclip object. I tried stage first since BirmapData.draw() doesn't work when drawing the movieclip on the web site. Do you have any suggestion for this situation? Also, is there any good method to find out what happened if the browser have "Uncaught Error: Error calling method on NPObject."? -
I have different account ID's with my iphone and computer.
I would like to standardize both to just the one.
One of the ID's doesn't work, when I tried to list this second email with the preferred one a message telling me that this email is already in use pops up.. yes it is, with me??
Is there an easy to fix this please, FabfitzIf the email address you want to use is being used as the primary email address on a different ID you have to manage that ID and change it to a different primary email address. This explains how: Change your Apple ID - Apple Support.
If it is being used as an alternate or rescue address on a different ID, you manage the ID and either remove it or change it to a different email address. This explains how: Manage your Apple ID primary, rescue, alternate, and notification email addresses - Apple Support. -
Why my Startup Manager does not appear when I hold the Option key when starting to boot.
I no longer have the Startup Manager appearing when I hold the Option key when starting to boot.
Instead, the system just boots into whichever OS was last selected in the Startup Disk Preference.
How to get back my Startup Manager so that I can boot up from my external hard disk.
Thank you.Can you please run the following in terminal and post the output in your reply:
diskutil list; echo; nvram -p | grep boot-args; echo -
I have Adobe Acrobat 9.5.4 installed on my computer and it doesn't work when PDFing
I have Adobe Acrobat 9.5.4 installed on my computer and it doesn't work when PDFing my document using Microft Word 2010. I have tried using the tab add-in, but it doesn't respond either. The only way to convert my document is to save it as a .pdf from the save as drop down box. I need to be able to have the full functionability of creating a PDF document with the tabs and links working.
Please help!From OFFICE 2010 you either have to have AA X or just print to the Adobe PDF printer. You give no information on your operating system or specifically what you mean by PDFing -- there are multiple ways to create a PDF from a WORD document and you have given no information. However, in this case your only choice is to print to the Adobe PDF printer. Otherwise, you need to upgrade Acrobat.
-
When selecting a menu item I used to click the left mouse button and hold it down, move the pointer to the desired menu item and release the mouse button. Everything works fine in the mine menu, but there's a problem when adding new adjustment layer from the layer panel: when I release the button nothing happens, I have to press the button again. In previous PS version it worked fine. How can I fix this?
I don't think that is user fixable, meaning you'll have to wait till adobe fixes it with an update.
Photoshop cc 2014
windows does not work
mac does work
Did you already post over here:
[Photoshop CC 2014] Click&hold-move-release doesn't work when adding adjustment layer from the layer panel -
TS1398 The internet on my Iphone 4 doesn't work when I use the Wifi
The internet on my Iphone 4 doesn't work when I use the Wifi at home. My Mac works fine. On the Iphone it shows it's connected but it doesn't open any app. Anyone knows what to do? Thanks
Ÿ. If you tap and hold the "Y" does it appear? If so, just slide your finger up to select.
-
It doesn't work when I press "transfer purchased items from ipod" and I don't know specidicly whitch item I need to transfer.
Whenever i press "transfer purchased items from ipod", itunes sync's for about 3 seconds, but I still can't install updates on the ipod without itues warning me about purchased items on the ipod, that aren't in the itunes library. I've tried folowing the steps in itunes help, but I can only find a step guide for when you know the specific item that needs transferring, and I donøt know that specific item.This Apple Tech Note explains the process:
http://support.apple.com/kb/ht1848
It will transfer all purchased items that the computer you are transferring to is authorised to play: you don't have to select the items. -
I have recently upgraded to iPhone 5 from 4, call line identity doesn't work when call other iPhones. It works when calling any other brand of cell phone. Network carrier assures me problem is not on there side. Any assistance will be appreciated.
I have recently upgraded to iPhone 5 from 4, call line identity doesn't work when call other iPhones. It works when calling any other brand of cell phone. Network carrier assures me problem is not on there side. Any assistance will be appreciated.
-
Imessage doesn't work when i connect to my wifi only works on mobile date how do i fix this?
Imessage doesn't work when i connect to my wifi only works on mobile date how do i fix this?
1. Did you use Bootcamp Assistant?
2. Did you build a USB with Windows 7 ISO and Bootcamp drivers?
3. You should use a USB2.0 disk, not a USB3.0 disk (flash drive).
4. What year is the Retina MBP? -
My iPad takes hours to charge even when I turn it off I have bought like 6 chargers and my iPads been sent back twice and it still doesn't work when I'm charging it what do I do ??
I am also having the same problem.. Its too much annoying and its unfortunate nobody at apple support has anyclue of what is happening?
... This is happening almost most of the time keeping my phone down most of the times. -
How do I delete items in my calendar when it doesn't work when I hover them over the trash can?
How do I delete items in my calendar when it doesn't work when I hover them over the trash can?
There are several ways
- Selecting the event and hitting the "delete" key on your keyboard (as Wayne Contello said)
- Selecting the event and opening the "edit" dropdown menubar item, and then selecting "delete"
- Selecting the event and right clicking, then selecting "cut" (this option puts the event on your clipboard)
Maybe you are looking for
-
Help me in building menus dynamically to database
i have the following code whic is developed normal html and .js and .css pages i need to deploy all these in a webserver and make the menus dynamically i am sending he following code plz help me since i am new to java and jsf, jsp i am unable to perf
-
Use standard text (SO10) in report(SE38) to compose the body of email
hello experts, here i wanna create the body of email with a format, hence i decide to use Standard Text. in this Standard Text, i also maintain some variable such &p_name&( i remember it works in forms,such script and ssf), while i define p_name as
-
Process chain is not visible in Quality after TR transport
Hi, I have transported process chain to Qua, but its not visible, only the technical id of process chain is displayed in RSPC tcode. I've tried activating through RSPC_CHAIN_ACTIVE_REMOTE, but still, its not visible in rspc tcode.
-
I reinstalled windows and wiped out everything. Is there any way to retrieve my library or at least my purchases??
-
Dear friends, I could able to install Oracle 9.2 by installing orarun.rpm ( which creates and sets environment for oracle user for installation) but when I try to install by logging ora<dbsid> which is created during central instance will